Image on Camera (URGENT)

Hi All,
I want to place one image / String on camera (ViewFinder).
I read that using jsr-234(AMMS) u can do this kind of things but i can not able to do that.
Is any one have a idea about the same thing.
or another way that i can do.
please reply this post or mail me at [email protected]
Thanks.
Priyesh.

Hello again Priyesh
Yes, you're right and sorry for the lapse, as I told you I was away from my computer :-(
I've tried out everything I can think of, and the best suggestion I can give you is to size and place your video capture control on the Canvas, leaving the rest of the Canvas free for text and/or rectangle or other graphics. I'd show you more of my code, but frankly I feel ashamed of it -- all the experimenting really messed it up :-)
You won't need more than this, anyhow --videoControl.setDisplayLocation(x, y); // coordinates of top left
videoControl.setDisplaySize(width, height); // size of controlGet an Image from the capture and size it:byte[] raw = videoControl.getSnapshot("width="width"&height="height);(substitute width and height with integers e.g. "width=120&height=100".)
I couldn't find any way to show the viewfinder in fullscreen mode and overlay a rectangle, which is what I think you were lookng for. Will this do? Maybe it'll have to!
:D

Similar Messages

  • Starting an action by opening an image in Camera RAW

    I am currently using Adobe CS3 Design Premium with Windows XP Pro as the operating system. The computer is a self build and has 2GB of RAM, 450GB of onboard HD storage and 6x500GB of external HD storage.
    As a photographer I frequently end up with anything between a 100 and 300 RAW images after a days work and convert them to DNG, Tif and JPEG files.
    With CS2 I ran an action which opened the image in Camera RAW which then enabled me to make adjustments before opening the image in Photoshop and completing the other elements of the action. Since upgrading to CS3 I have been unable to create a similar action and having read the "knowledge based" information and looked through the topics in the forum have failed to find anything that is of help. As each image and the conditions under which it has been taken differ it is quite important to make corrections in Camera RAW before completing the action in Photoshop and fixed settings applied by Camera RAW would be inappropriate.
    It is always possible that I am making a fundamental error in writing the action but given my previous experience it seems unlikely. Incidentally I usually bring up the images in Bridge and then select the best images to process and start the action from Bridge.
    I should be very grateful for any help in resolving this problem

    >It is always possible that I am making a fundamental error in writing the action but given my previous experience it seems unlikely. Incidentally I usually bring up the images in Bridge and then select the best images to process and start the action from Bridge.
    there's your problem...when you start the action recording from Photoshop you'll need to actually open a raw image FROM Photoshop not from Bridge. Don't know if this changed from CS2>CS3, but that's the only sure way of recording an open function...from within Photoshop. Then in the Batch you'll still need to override open so the open will open the image with the parameters already set in the image.

  • In the new iphoto app, why can't i save multiple images to camera roll at once?

    why can't i save multiple images to camera roll at once? it seems i can only save one at a time and its very frustrating..
    the options seem to be there, they are just greyed out and i cant click on them.
    at first i thought its because the images were too big, so i tried it with smaller images but same thing.
    APPLE HELP!

    I can confirm @khaniff's original post the option in iPhoto for iOS is greyed out in conflict with the referenced article that follows:
    Save to the Camera Roll
    Tap a photo, album, or event and tap .
    Tap Camera Roll.
    Confirm or change the photos you want to share by tapping an option.
    Select all the photos in an album or event: Tap All.
    Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.
    To use your photo in another app, open the app and select the Camera Roll album.

  • Is there a way to open an image in camera raw from within photoshop cs6 (on a PC)?

    is there a way to open an image in camera raw within photoshop cs6 (on a PC)? or do I have to use bridge to do this?
    Thanks....

    Just open the camera raw file, and it will open in the ACR plugin.

  • How to remove all changes made to an image in Camera Raw -

    In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
    In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
    TIA

    Sorry, I don't know the answer to that for sure*.  As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
    * However, since no such shortcut appears next to the menu command, I doubt there is one.
    You could create an action and assign it a key command, though.  Doh!
    Never mind.  That was a total brain short circuit.  You can't create actions in Bridge.  You'll need a script.  Ask in the Bridge Scripting forum.
    Message was edited by: Ramón G Castañeda

  • Grabing images from camera & Apply OCR To that image

    Hi,
    I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
    Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
    I m  modified some Sample NI VI's for capturing the images & for OCR.
    I m new for labview. I cant understand where is the problem in the VI.
    i also create a character set file for reading the characters using OCR Train
    so please help me to find the solution.
    Attachments:
    Character reading.vi ‏91 KB

    HI.
    Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
    Regards.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S
    Attachments:
    Camara OCR.vi ‏42 KB
    11.JPG ‏77 KB
    22.JPG ‏17 KB

  • After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although

    After using PS CS6 for well over a year, Bridge now will not open RAW images in Camera Raw, although Photoshop does. When I try to open them in Bridge, I receive a popup message that says that it "requires that a qualifying product has been launched at least once to enable this feature." Obviously, I have done so hundreds of times since installing and activating CS6. What gives, and how do I fix it?

    Things have now become significantly worse!
    Now when I try to open anything from Bridge, or try to open PhotoShop at all, I receive a popup that gives me 2 options: 1) License PS CC, or 2) continue with my trial of PS CC.
    So far as I know, I have not downloaded any trial of anything from Adobe in many months. In fact, I have no interest in PS CC. I wish simply to use PS CS6.
    I have uninstalled my Adobe Creative Suite 6 Design Standard, of which my PS CS is a part, and reinstalled it but I still am blocked from using my properly licensed programs.
    Please advise.
    Mike Hannisian

  • I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    Close and restart Photoshop if you have not already done so.
    In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw.  What version does it say there?
    -Noel

  • Bridge NEF view  - selected image altered - Camera Raw issue?

    I use a Nikon D700  and CS3 Bridge on a MAC OSX 10.4.11, and when browsing NEF images in Bridge there is an action performed on the image whenever I click on it. I use the settings where a filmstrip is along the bottom and upon selection a larger image appears above. Initially the image appears as I recall exposing it and looks balanced with good saturation, but after selection the image brightens and loses saturation after a few moments. When I open the image in Camera Raw I find that the Brightness is set at +50 and the contrast is set at +25, and the Blacks slider is set at 5. When I reset those parameters to zero I do not recover the look of the image as it was before selection in the bridge window. In order to do that I have to raise the saturation, decrease the brightness and do a fair amount of work to get back to the way the image appeared in Bridge prior to selection. Can anyone tell me what is happening to the image in bridge and how to keep the image from changing after I select it, or at least how to find the settings that have been evidently applied to the image?  If I right click on the thumbnail first, I find that the image will open in camera raw without any changes being made in Bridge, so I was able to make jpegs that show the difference between the two images. The first image is as it appears before selcting the thumbnail, and the second is the image in camera raw. If I were to have selected the image normally with a left click in Bridge, the photo as you see it in camera raw would have appeared in bridge and not been recoverable to its earlier state. Can someone help me undertand what is happening here? How can I find out what Bridge or Camera Raw is doing to the images and retain the appearance as it first appears in Bridge? Thank you for your help.

    This is a common question.
    What you see first in Bridge is actually a JPG which the camera has embedded in the NEF, and uses all the camera's color settings (contrast, saturation, etc.).  Once you select the NEF, ACR (Adobe Camera Raw) attempts to render its own preview of the NEF.  Because ACR does not understand the camera's color settings, it gives you its default rendering, which usually is somewhat different than the camera's.
    In newer versions of ACR (5.x), Adobe has profiles which mimic the camera's presets ('Standard', 'Vivid', etc.) and can be applied automatically in Bridge.  Unfortunately, you will need CS4 for this version of ACR (and these profiles have some issues of their own, e.g. http://forums.adobe.com/thread/479960?tstart=0).  You can also create your own ACR presets to more or less emulate a particular look (I believe you will need CS4 for this as well).

  • Unable to open image in camera raw in CS3

    I have CS3 and I'm unable to open images in camera raw.  I updated to 4.6 but it hasn't helped, and I've tried suggestions such as "open as" and then "formats" and choosing "camera raw"...still doesn't work.  Adobe is not able to help me over the phone due to the older version of Photoshop...any thoughts or help?  Thanks so much.

    A critical piece of information would be what camera model the RAW images you're trying to open are from.
    Each model camera must be supported specifically in Camera RAW.  If your camera is newer than the latest ACR version available for your Photoshop version then you'll be unable to open the RAW files in ACR.
    Three solutions are:
    Use the latest version of the free DNG Converter from Adobe Updates < http://www.adobe.com/downloads/updates > to convert each RAW file to a DNG and then that DNG will be openable in the older ACR version.  You may need to change the ACR-version compatibility setting in the DNG Converter.  This solution is free but doubles your storage space if you keep your original RAW plus the DNGs.
    Buy Lightroom (which is less than half the price of Photoshop) and continue to use your older Photoshop with it.  The adjustments you do in LR are the same as you'd be able to do in ACR (actually more because the newest version of LR and ACR have more adjustments)
    Upgrade to or buy the latest version of Photoshop, depending on your upgrade availability.
    I personally have both Lightroom and Photoshop and use LR 90% of the time.

  • I installed CS3 on my windows 8 laptop, and I can't open my raw images in camera raw. It worked fine on my old XP computer

    I installed CS3 on my windows 8 laptop. Why can't I open my raw images in camera raw? Worked fine on my old XP computer

    If in photoshop cs3 you go to Help>About Plug-In and click on the words Camera Raw, what version does it say?
    Which camera are the camera raw files from?
    After you downloaded the Camera_Raw_4_6.zip, you unzipped (extracted) the file and then copied the Camera Raw.8bi to
    Program Files x86\Common Files\Adobe\Plug-Ins\CS3\File Formats (windows 8 64 bit)
    or
    Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats (windows 8 32 bit)
    replacing the existing camera raw 8bi?

  • How receive image from camera with PCI-bus

    Hello all
    Please help
    me.
    I have LV 7.1.1.
    I wont
    watch two and more images from cameras at the same time.
    I have capture
    card (PCI-bus) with 4 video-input.
    What kind
    of data must be transfered from this capture card  to LV?
     With respect
    Aleksandr.

    Hello Aleksandr
    please provide more information, what type of video card do you have?
    Have you configure the card so you can watch an image with MAX?
    I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
    vicente

  • HT5361 IN OS 10 where can one find the folder for images that came with email?

    IN OS 10 where can one find the folder for images that came with email?
    I wish to delete the leftover image files to free up drive headroom.

    I checked in this place, no dice!
    Home/Library/Mail Downloads, or
    the system "Downloads" folder

  • HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

    After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
    Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
    Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

    No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
    I've loaded thousands of photos on my IPad and never have had that problem.
    Don't blame a moment of carelessness on your device.
    If you want to make such a suggestion to Apple use http://apple.com/feedback

  • Camera software not opening to transfer images from camera to computer. What to do?

    My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
    Thank you!

    Hi BLG,
    If you haven't already done so, please update your software for Windows 7.  Here's how.
    Just click here to access the software updates for your camera.  Once there, just enter your operating system, then the version of the operating system.  Now click on "Software" to show the software updates.
    Click on "ZoomBrowser EX 6.9.0a Updater".  Installation instructions are on the next page.  Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
    After accepting the required disclaimer, please download the program update to your desktop.
    After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
    Since you've installed an older version of software, you may now double-click on the program update to install it.  If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
    If you've already updated the software for Windows 7, please contact us for assistance.  Click here for contact options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for