Invoice Payment status in SRM Browser

Dear SRMers,
System Information: SRM 4.0, R/3 4.6 c
We have a situation where users want to see the invoice payment status in the SRM browser. We have not implemented the Invoice module in SRM and invoices are posted and updated in R/3.
Please suggest what is the best way to accomplish displaying the invoice payment status in SRM browser preferrably in the shopping cart header or in the follow on documents area with less custom work ? Any ideas are welcome.
Points will be rewarded for answers
Thanks in advance,
Bob.

Hi,
   As explained in one of my previous thread,running the report "BBP_IV_UPDATE_PAYMENT_STATUS" does not update the status in SRM .So for this there will be a lot of std modifictaions required to update the status in the SRM browser(SC history/follow on docs) i.e. ITS template as well as the std includes.
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

  • Invoice payment status will update in SRM

    Dear Experts,
    I  have done the invoice in SRM and invoice created in ECC and the same invoice number has been updated in SRM with status 'posted in the backend'.
    for thi invoice, i have completed the payment. I would like to know whehter these status will be updated in SRM or not?
    Thanks
    Ravi

    Hi
    It is not possible to see, but there is a way.  You need to check in ECC in FBL1N for this invoice for the invoice payment. and if you are confirm that no further invoice you need to tick final invoice posted in PO.
    With this tick you can confirm the status of the payment.
    regards
    Satish

  • SUS invoice "check payment" status

    Hi
    We are implementing MM-SUS scenario with SRM7.0 and ECC6 EhP 4 back end. When we process invoice from SUS its fairly replicated and posted in ERP and payment is made against the invoice in ERP. Now wehn I click on "Check payment status" button in SUS, the invoice web page turns to balnk and no information revtrieved from ERP.
    The customization for "check payment" is in active for SHOW_INVOICE_PAY_STATUS. And RFC connections are healthy. Could not understand why system could not get the payment status from back end
    Any inputs are appreciated.
    Thanks
    Kiran

    Hi Kiran
    many notes supports for srm 5.0 too for this functionality for eg 1040699 sap note
    srm-sus-inv component check
    1162560
    MANY NOTES correct his problem. check it up with SAP
    br
    muthu

  • Automatic place invoice payment On Hold when invoice status 'Validated' ...

    Hi..I need a quick help on the following -
    Here is the scenario...I have an Invoice with status ‘Validated’ and Approval field on the Invoice Header (Descriptive Flex Field) with status ‘Not Approved’
    based on the above condition, I am trying to place invoice payment 'On Hold' on schedule payments tab on invoice workbench ... I want to achieve this by a custom program..let me know if we have any standard API to do this(or do we need to directly update ap_payment_schedules_all.hold_flag to 'Y' when above condition is met)...please let me know your thoughts..Thanks!!
    Edited by: user600637 on Feb 21, 2012 2:06 PM

     If it was marked as an invoice then its probably a scam doing the rounds as its been sent by a buyer and altered to look as though he has paid you.
    Signs its a scam are >>>
    its an invoice BUT sellers send invoices not buyers
    marked as paid
    marked as gift
    says payment won't show in your balance for eg 24 hours
    can't be chargedback.
    Paypal NEVER tell you to send anything until the funds are showing in your paypal account balance.
    Paypal payments are more or less instant.
    Paypal will never tell you that a payment can't be subject to a chargeback.      ****************************************** I give up my time to help you so a thank you or kudos would be cool.
    Marking one of my replies as a solution would be appreciated if I sorted your problem.

  • Block the Vendor Invoice & Vendor Invoice Payment

    Hi Experts,
    I need more information about Block the Vendor Invoice & Vendor Invoice Payment.
    and laso is there is any standard report is there to see the blocked invoices
    Thanks

    Hi Mazid,
    In F110
    On the Status tab, choose the Proposal (change) button.
    Select All accounting clerks and choose Enter. The list of vendors and amounts to be paid displays.
    To review invoices for a particular vendor, double-click that vendor's line. A list of invoices displays.
    To block a particular invoice for the payment run, put the cursor on that invoice and choose the Change button.
    Enter the payment block indicator and choose   Continue.
    To unblock a particular invoice for the payment run, put the cursor on that invoice and select the Change button.
    Delete the payment block indicator and choose   Continue.
    Try MRBR for to Review and Release Blocked Invoices, you can also use transaction FBL1N to list the vendor open items and change the payment block within the transaction
    Assign points if useful
    Regards
    Genie

  • Unlimited qty item blocked for invoice payment

    Hi All,
    I am facing problem in invoice payment.The items has been already assigned for overdelivery tolerance as unlimited quantity, but even then they get blocked for invoice payment telling as because of quantity variance they have been blocked.
    Kindly guide for some debugging or parameters to be looked upon.
    Regards
    Dinesh Singh

    Vadim,
    You are a real fellow !!!
    There is a copyright on myposts !!!
    You could at least change a word...
    Re: confirmation over PO quantity not possible despite TOG tolerances
    Dinesh,
    Have you checked all tolerance keys in SRM ?
    There are some tolerance key for GR qty, and some for INV amounts.
    Rgds
    Christophe

  • AP Invoice Approval Status in R12

    I was trying to find invoice approval status in AP (R12) using below.
    select ai.invoice_num,
    AP_INVOICES_PKG.GET_APPROVAL_STATUS('36928',209.28,'N','STANDARD') APPROVAL_STATUS_LOOKUP_CODE
    from ap_invoices_all ai where AI.CREATION_DATE between '1-AUG-2010' and '16-OCT-2011'
    AND AI.INVOICE_NUM='8778107012529398SEP11';
    Result: Approved
    But, when i opened this invoice 8778107012529398SEP11 in Payables manager -->Invoices -->Inquiry -->Invoice Overview
    Under Invoice Status
    ===============
    Approval: Initiated
    Status : Validated
    Accounting: Processed
    Payment:Not Paid
    Not sure why it is showing me Approval: Initiated from the front end & showing Approved when i used above query?
    Could you let me know where i'm going wrong

    Please see if (R12: Status of the Invoice Becomes Blank After Applying a Prepayment [ID 733006.1]) is applicable.
    Thanks,
    Hussein

  • Report to view vendor payment status

    Dear GURUS
    Is there any Report to view vendor payment status  against purchase order.
    Please give me transaction code if any.
    SANTOSH KADAM

    check report
    FBL1N
    u will get the report u can creat ur own lay out also to satisfy u r need
    hope this helps

  • Invoice Payment Block (RBKP-ZLSPR / BSEG-ZLSPR) Update

    Hi ABAP Gurus,
    Good day.
    Basically, I need to update Invoice Payment Block from "W" to "R".  I have tried BAPI_INCOMINGINVOICE_CHANGE but could not change the Payment from "W" to "R".  I believe that this is part of the said FM's restriction.  As per documentation, "it is not possible to change invoice documents flagged for invoice verification in background using this method".  Payment Block "W" is basically Invoice Verification via Workflow.
    On the other hand, I have also tried to use FM FI_DOCUMENT_CHANGE without any success. I keep on getting no document found.  I have played around with the parameters being passed but without any luck.
    Can you kindly provide a solution for this?  Thanks in advance for your help.
    Best regards.
    Brando Braganza

    Hi,
    You want to release a blocked invoice.You can use following BAPI
    'BAPI_INCOMINGINVOICE_RELEASE'
    For sample code
    goto>SWO1>Enter BUS2081
    Method-->Releasesingle
    Thanks
    Nabheet

  • Invoice payment due date.

    Dear all,
    I would like to display the invoice payment due date in my SAPscript. I've heard about the FI_TERMS_OF_PAYMENT_PROPOSE function module and thought that it could feet my need. But I'm wondering if there is no other way to proceed since I can't find documentation on the above function module. Also I'm surprise to do not find in standard among the structured tables the invoice payment due date data.
    Best regards.
    Nozome.

    Hi Nozome,
    You may look at the following post.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d3731303434}.jspa
    Cheers
    Vinod

  • Invoice payment made but document not displaying

    HI gurus ,
    I have made an invoice payment  but the document  is not displaying in FB03. How could I know if the posting went through properly or not?
    many thanks for your help
    regards
    cecile

    Hi,
    TIP 1]
    in F110 ( payment run ) you can find a icon Payment ( that one that looks like a paper scheet ). This is payment log and here you can also find which documents were posted by payment and also by which open postings positions. This requires by payment run addtional log check box and vendor/customer number.
    TIP 2]
    In FB03 you can find also by using dynamic selection and selection option Transaction with value "F110" than a list of documents posted in F110 will popup. With another dynamic seletion option it will be more accurately.
    TIP 3]
    Use FBL1N with specific select option to see cleared items to specific date. By generated list of line items you can find your invoice and clearing document as wrote Nitin abov.
    Hope it helps
    Jan

  • A/R invoice+payment and A/R invoice PLD reports

    We are using PLD to generate our reports. Our A/R Invoice+payment report is different from our AR invoice. We have designed to report formats for this in PLD. However, PLD allows to preview only one report that has been made default. Is there an option that we can use to select the type of report to print especially for these reports?
    Regards,
    Asif

    Hi
    I don't think there is any alternative way beside selecting PLD everytime you print the layout .
    I believe it is done by same person (both A/R+ payment and A/R invoice )
    If not you can do :
    1. make your PLD  default  by user  or
    2. In most cases ,only few customer pays right away , you can set PLD default by Business partner or customer who does that
    Hope this helps
    Bishal

  • Query  for report to show Invoices, Payments and Discounts

    Hi All
    I am hoping someone can help me with this query.
    What the customer needs is the invoices for a specific date range, the payments applied to the invoices and the discount amount
    Eg...
    Invoice    payment   discount
    100         90              10   
    This would be easy to get from the ORCT and RCT2 tables.
    However, sometime the users add the payment on account and reconciles the invoices and a manual journal for the discounts.
    So it would be best to look at the OITR and ITR1 tables?
    This is what I have so far and it almost balances...
    I am using this query to create the report in crystal,
    To create the discount amount from the incoming payment window i said (T0.ReconSum - T3.TrsfrSum)
    I also took out the vat amount within that formula.
    With the amounts from the manual journal, i just took the amount as is.
    select T2.CardCode, T2.CardName, T0.SrcObjTyp, T0.SrcObjAbs, T0.ReconSum, T3.TrsfrSum, T4.ReconDate, T2.U_FundedNonFunded, (T5.Debit - T5.Credit), T6.PymntGroup
    from ITR1 T0
                 inner join OCRD T2 on T0.Shortname = T2.CardCode
                 left outer join ORCT T3 on T3.DocEntry = T0.SrcObjAbs  and T3.CardCode = T0.ShortName
                 inner join OITR T4 on T4.ReconNum = T0.ReconNum
                 left outer join JDT1 T5 on T5.TransId = T0.TransId and T5.ObjType = T0.SrcObjAbs and T0.ShortName = T5.ShortName
                 inner join OCTG T6 on T6.GroupNum = T2.GroupNum
                where T3.DocDate <= getdate() or T5.ContraAct = '1127331'
    the account 1127331 is the Discount GL account.
    Based on the example the Payment + discount = Invoices
    however not all the customers are balancing..
    any ideas? it looks like my query is getting only the invoices where a payment has been done. The amounts just dont seem to match.
    Thank you
    Jerusha

    hi
    I think your join with OJDT is wrong in this part : T5.ObjType = T0.SrcObjAbs
    you should write
    T5.ObjType = T0.SrcObjTyp
    (I think you don't need this part at all )
    try this:
    select T2.CardCode, T2.CardName, T0.SrcObjTyp, T0.SrcObjAbs, T0.ReconSum, T3.TrsfrSum, T4.ReconDate, T2.U_FundedNonFunded, (T5.Debit - T5.Credit), T6.PymntGroup
    from
    ITR1 T0
    inner
    join OITR T4 on T4.ReconNum = T0.ReconNum
    inner
    join OCRD T2 on T0.Shortname = T2.CardCode
    left
    outer join ORCT T3 on T3.DocEntry = T0.SrcObjAbs and T3.CardCode = T0.ShortName
    left
    outer join JDT1 T5 on T5.TransId = T0.TransId and T5.ObjType = T0.SrcObjTyp and T0.ShortName = T5.ShortName
    inner
    join OCTG T6 on T6.GroupNum = T2.GroupNum
    where
    T3.DocDate <= getdate() or T5.ContraAct =
    '1127331'
    please let me know if it works now
    shachar

  • PO - Line Items Payment Status Report

    Hi Friends,
    Is it possible to get a PO (Line Items wise) Payment Status Report.
    My client wants PO Line wise payment status as a MM report development.
    We have Down Payment, Residual & Retention money as a business practise with our vendors
    Following is the MM-FI flow in our company code..
    Create & Release PR u2013 MM - Creating PR
    Create & Release PO (ME21N) u2013 MM u2013 Creating PO
    F-47 Down Payment Request u2013 MM u2013 Creating DPR
    F-48 Post Vendor Down Payment u2013 FI - Posting DPR
    FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
    MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
    MIR7/MIR6 IR - MM/FI u2013 Parking & IR
    F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
    F-53/F-58 u2013 Posting Payments after deducting Retention
    F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
    Thanks in advance.
    Regards,
    Vikrant Sood
    Moderator: This thread has been locked due to crossposting.
                       Please do not post the same question in different forums.

    hi
    there is no sap standard report available you have to develop your z report.

  • PO (Line Items wise) Payment Status Report

    Hi Friends,
    Is it possible to get a PO (Line Items wise) Payment Status Report.
    My client wants PO Line wise payment status as a MM report development.
    We have Down Payment, Residual & Retention money as a business practise with our vendors
    Following is the MM-FI flow in our company code..
    Create & Release PR u2013 MM - Creating PR
    Create & Release PO (ME21N) u2013 MM u2013 Creating PO
    F-47 Down Payment Request u2013 MM u2013 Creating DPR
    F-48 Post Vendor Down Payment u2013 FI - Posting DPR
    FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
    MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
    MIR7/MIR6 IR - MM/FI u2013 Parking & IR
    F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
    F-53/F-58 u2013 Posting Payments after deducting Retention
    F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
    Thanks in advance.
    Regards,
    Vikrant Sood

    as per my knowledge you can configue a new Z table or prepare a Query using EKPO table you will your desired result.
    regards,
    Ninad Kshirsagar

Maybe you are looking for