IPhone 5s Major Issue

I have had my iPhone 5s for around 6 months and have been happy with it and have no issues till now..
All of the sudden, through no perceived fault of my own(I haven't changed anything), tremendous problems have occurred.
First off, iPhone 5s running IOS 7.1.1(11D201) 16GB
THE ISSUES
I first noticed the issues this morning when attempting to use SnapChat, the camera was just not loading and wen it did, it was not responsive with the focus.
I closed the app(Through Task Manager) and went to to the Camera app its self ad to which nothing. The camera would open up, show a black screen(With capture button) and then almost immediately close on its own. The camera is not working and shows no sign of changing that.
I then went to see if the camera would open from the lock screen(Swipe up) and the phone would just go to black screen, then display the Apple Logo(As on start -up) and then return to the Pre-Swipe-To-Unlock screen.
I have tried all the pre-mentioned tricks:
Turning it off and on,
Adjusting the Voice Over to trick the system,
Changing the Increased Contrast
ETC
and still no fix, the next step would be taking the device to Apple, thought I'd check here first.
Help Please
Roderick

I must first apologize, it completely slipped my mind to update this but here goes.
The appointment went as follows.
I arrived at my local Apple Store, to where I had made the appointment. After a short wait, I was seen by a Genius member. He approached me in a friendly manor and took me through the steps.
First thing he did was do a full reset, as if a new iPhone and the phone was cleared. Sure enough the camera still did not work. He then checked the warranty status, still covered.
He took my phone into the back room and told me to wait, I walked out the store and browsed the shopping retail park. 45 minuets later, I returned to the store and I was greeted with a friendly face and my iPhone.
Turned out it had a faulty camera and it was replaced in-store and returned to be in under an hour. To be frank, I was amazed, considering my sister had to wait a month to get her phone back from Samsung...
They even managed to replace the camera without damaging/removing my skin(full cover sticker).
Had I not been under warranty, it would have cost around £38(£37.??) which is a fair price reguardless
Apples care for customers is somewhat astounding
My phone is now in perfect working order.

Similar Messages

  • IPhone 3G Major Issues - Neither Apple or AT&T can explain.

    I know this is much to read but please take the time and do so.
    My mother has an iPhone 3G. Unfortunately for her, she has had nothing but problems. She purchased a 3G from AT&T about two months ago and for some reason it was doing the following: white screen of death, freezing, not receiving calls, will only get signal if she restarts it, we have to do constant hard resets. So we decided it was time to bring it to apple to get a replacement. We did that and they replaced it with no problem. Soon only hours later the phone began acting the exact same way. So I decided possibly it could have something to do with the SIM card. So the next day, we went to AT&T and got a new SIM with no problem. Same thing, only a few hours later the phone began acting crazy again. This is not a joke.
    Now before I get a million responses saying to RESTORE (from backup and as new phone), do hard resets I need to tell everyone that I have restored about 10 times and probably hard reset 3 to 5 times a day. She owns a brand spanking new MacBook Aluminum 2.4 and it has absolutely no 3rd party programs at all. iTunes is updated and so is the iPhone 3G. Also, before anyone says anything about damaging or dropping the phone please know that I have already checked that out. Each one she has had has absolutely no scratches. The guy at the genius bar made the comment, +"this is the most prefect looking iPhone I have ever seen brought in"+
    What are the chances that the replacement phone Apple gave us was defective also??? I know it is POSSIBLE, but really? Many would say just bring it back to Apple but I need to mention the nearest Apple store is 3 hours away from us.
    Neither Apple or AT&T can explain to us what could possibly be wrong. I have spoken to about 5 people from each company and they each say, "well, you need to bring it (to the other company) ex. Apple says bring it to AT&T and AT&T says bring it to Apple.
    Is there anyone else out there that possibly is experiencing the same problems?
    In our family we ALL have iPhone 3G's. Five to be exact. They ALL work PERFECTLY except her iPhone.
    This is crazy.

    Is there anyone else out there that possibly is experiencing the same problems?
    I venture to say there probably are and if so, knowing this certainly won't resolve the problem with your Mother's iPhone.
    And I venture to say there have been some people who received an exchange under warranty and the exchange turned up having the same problem or there was another problem with it.
    All I can recommend is requesting another exchange with Apple. You don't need to make an appointment at an Apple Store for this. You can handle everything over the phone by calling AppleCare at (800) 694-7466. If it is determined that your Mother's exchange needs to be exchanged and it certainly sounds that way, AppleCare will ship the exchange right to her door. Someone must be available to sign for the package, and she will use the same box to return the existing iPhone. The return shipping label is located below the shipping label to her, and Apple includes tape to reseal the box and a paperclip for removing the SIM card from the existing iPhone and placing it in the exchange. When the box is ready to be returned, you call the number included/provided with the shipment to have the box picked up by the designated carrier. AppleCare will also request a credit card number for the replacement in case the existing iPhone to be exchanged is not returned to Apple.

  • IOS 8.2 on iPhone 4S - (major) Safari issue?

    Hi everyone,
    after getting pretty excited while watching the Keynote earlier today, I think I made a big mistake updating my iPhone 4S to iOS 8.2 immediately after release as I have a major issue with Safari now - I will try to explain:
    It will take Safari several minutes to load even the most simple website (google) on the first try. If not interrupted during this time, the website will eventually load and after that Safari is as fast as it should be when opening other websites, tabs or using the address bar to search. After closing Safari - and re opening it will again, load any given site (tried NYTimes, WSJ, google, Highsnobiety, Selectism, gmail) painfully slow and after that, again work as fast as it should be.
    If Safari is interrupted during this first opening of a site, it will freeze and finally shut down.
    What it also kinda funny: If a site like nytimes.com has a re-deriction, to mobile.nytimes.com in this instance - Safari will notice that immediately/as fast as it should, but then takes minutes to load the site.
    Internet connection via W-Lan or mobile works at the desired speed, as do apps like Mail, NYTimes, WSJ i.e.
    What I tried so far:
    Shut down phone and restarted - didn't help.
    Reseted phone - didn't help.
    What I could do:
    Make a clean iOS 8.2 install ("new iPhone")
    Recover from Backup.
    Since it is Tuesday (10.03.2015) at 02:20 AM where I am located, I'm not really in the mood to completely restore my phone (that I need) anew right now. I will see if there will be a 8.2.1 to fix this rather soon and keep Safari opened in background, or if I will have to put up with configuring my iPhone anew in the coming week...
    Greetings and thank you very much for any input you might have.
    Oliver

    Thank you very much for bringing that up jakefsf!
    Although I didn't mess with the DNS servers in my settings in first place, I figured it couldn't hurt to try to change it - and I was right, Safari works (for) now - as it should - every-time.
    What I did: I changed the DNS Server's address from my original address to 8.8.8.8 (google's DNS server) - after that Safari worked like a charm. I changed back to the original address, Safari still works like a charm. So I guess something got clogged/*whatever* - and that "playing" with the addresses removed it.
    (I forgot to mention in my original post, that I too tried to delete the cache and stuff - but that didn't do the trick.)
    So I guess either the Update caused the "clogging" or my Router/ISP (Which I doubt, because everything was fine on my MacBook Air - using the same Router/W-Lan) - thankfully I'm fine now with a fully operational phone.
    Thank you very much for bringing this very helpful solution jakefsf!!
    @jimdouglas, It can't hurt if you try to do the same. Settings -> WiFi -> tap on the circled i behind the WiFi you're using, and change the DNS Server's address to 8.8.8.8 - see if Safari works. If it does, you can go back to the settings, remove 8.8.8.8 (leave it blank) it will automatically get the address back from your router - if it still works, it did the trick.
    Greetings,
    Oliver

  • Hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    hello there, i have a major issue with my iphone 3g, it ran out of battery yesterday and now it won't charge or turn on at all, can anyone help??

    Apple Does Not recommend that. Please Read.
    http://support.apple.com/kb/HT1490
    From that article
    "Portables with built-in batteries"
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air (all models)
    MacBook Pro
    MacBook Pro with Retina display (all models)
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (17-inch, Early 2009) and later
    Thanks.
    Allan Mac wrote:
    Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
    I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
    Allan

  • Major Issues With My 4s

    okay so my iphone has been giving me major issues since i got it exactly one year ago.
    my iphone:
    -black 4s 16GB Verizon iOS 6.0
    Issues
    -my caller id on other phones comes up as "blocked" or "restricted" unless i dial *82 then the number i want to call. verizon tells me i do not have "caller id blocking" turned on
    -when i receive a text message or imessage the incoming number shows up as 82 then the number (ex. 821234567890) instead of the contact number. when i slide to reply it insists on creating a new message, not adding to the conversation already in the messages app.
    when i first received this phone, purchased from verizon on the internet, i was unable to activate the device. when i took the phone to the apple store, they told me it was set to vodafone (british?) but somehow verizon support was able to activate the iphone. because of these problems ive had to save contacts in my phone with their regular number for texting (ex. 123-456-7890) and their number with *82 (ex. *82 123-456-7890) for calls, so my caller id shows. Siri will not dial numbers that start with * or #, making the feature basically useless.
    does anyone have any ideas on how to fix this or do i have to buy a new phone (which i don't really want to do).
    thanks in advance,
    john

    i dont have that option all that shows is,
    [my number]
    calls
    [reply with message >]
    [tty           off]
    [change voicemail password]
    [dial assist     off]
    dial assist automatically determines the correct
    international or local prefix when dialing.
    [verizon services >]

  • IPhoto Migration to new Mac--MAJOR ISSUES

    We just got a new iMac to replace our previous 2006 iMac that was running Mountain Lion. It had already been determined by a Mac repair person that our old iPhoto library was corrupted and that we couldn't migrate that Library to the new Mac. Rather, we'd need to drag the "Originals" folder to the new Mac. Note: Due to the amount of photos we have, we store our photos on an external hard drive. (Also, nevermind that the 35K photos that were so carefully organized into folders and albums over the past 8 years would be lost). Fine. That's what we did. Major issues ensued:
    1. Everytime I've imported photos from my iPhone over the past two years, random photos (mostly those that I edited in Apps like hipstogram) multiplied and were reimported EVERYTIME I plugged my phone in the Mac. There are, like 10 copies of certain photos.
    2. Many photos are somehow duplicated, but in different "rolls." How do I even find the duplicates? They're dated when they were imported, not created. Grrr...
    3. During the import to the new Mac, an error message let us know that 795 photos were not imported. Which ones? Don't know.
    4. The WORST issue of all, a lot of the metadata on the photos is incorrect. Some is user error (Canon camera had the year as 2007 when it was really 2008), but a lot of photos imporated from the iphone over the years are saying 1/20/1980 or another nonsensical date. Or the photos are dated as the date of import, not when they're taken. So, not only did I lose the organization of the library, the metadata is incorrect. For many of the 35 thousand photos over 12 years.
    The result? A jumbled nightmare of "Events" that aren't in chronological order in the new iPhoto.
    Sidenote: Why can I navigate to the Originals photo files in the old Mac, but I cannot navigave via the finder to the Originals in the new Mac? The only way I can get there is to click "Go to original file" from iPhoto...and even then, its location is unclear.
    I don't know what to do from here. The options as I see them:
    1. Clean up the duplicates/metadata in the old Originals folder and re-import the folder to the new Mac.
    2. Start with the current debacle on the new Mac and painstackingly reorganize all the folders (cleaning up, correcting dates).
    Another sidenote: Is there a way to delete a photo in iPhoto and truly delete the file? I started deleting duplicates on the new iMac and I have to navigate to the original file (in its mysterious location), delete it, and then delete the thumbnail in iPhoto. This may take a year or two to complete. There has a be a better way. Help.....me.....

    Our Mac person determined that our library was corrupted because various attempts to rebuild the cache/library were unsuccessful (spinning wheel and error messages).
    try to reproduce this on your old computer nad report the exact error messages (and look at the iPhoto menu ==> about iPhoto to get the version)
    So, from what I understand, the best path forward would be to fix/rebuild the old library to be able to migrate it to the new machine
    Yes
    I do have a question about deleting photos in iPhoto. How do I handle eliminating duplicate photos in an iPhoto library (new or old)? My understanding is that deleting an image in iPhoto does not delete the actual file (in originals or masters or where ever it is housed on the Mac). Does this matter? Why would deleting photos in iPhoto cause corruption of the library?
    Duplicates - IPLM does them very well
    And most certainly deleting using iPhoto properly does totally remove the photo form iPhoto and from th ehard drive
    Deleting in iPhoto is trivial - select a photo in an event, press the delete key and empty the iPhoto trash (do not let the iPhoto trash get large since sometimes iPhoto does not handle large trash bins well) - on later versions then you need to empty the system trash too
    Do that and the photo is gone from iPhoto and from the Mac (given that you have a corrupted library past deletes might not have worked - from a properly working library it will work)
    Deleting using iPhoto will not corrupt anything
    BUT you stated
    I started deleting duplicates on the new iMac and I have to navigate to the original file (in its mysterious location), delete it,
    That is NOT using iPhoto to delete photos - it is using the finder to go directly into the contents of the iPhoto library and makeing changes  - that corrupts the database
    LN

  • Exchange 2010 and iphone calendar sync issues

    Hey,
    I know this question has been asked plenty of times before and just need a straight resolution. We have just migrated our environment to Exchange 2010 and the major issue is that when an event is created in Outlook 2011 it is not always showing up on their iphone and also vis versa. Is their a resolution to this problem so I can implement it in an emergency change. Thank you for all your help!

    Here let me explain the scenario again any user who logs in to exchange from outlook working fine password not expired and he has iphone active sync working no issues , now while all devices are working when he starts his ipad after a week or so when he
    opens his email on ipad it prompts the password on ipad and same time on iPhone , he does not want to enter the password and wants a technical justification , I told the user something to do with Exchange 2010 sp2 and ios 7 ,but that is invalid justification
    . if you have any other valid justification please let me know. or a solution to this issue. user wants to login without any password prompt while the password is saved in device and not expired , is there any feature in Exchange 2010 sp2 that would recognize
    how many days device has not logged it and would force to enter the password.

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

    The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse.  The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

    Perhaps, I was not clear enough.
    I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
    Recently, I just purchased a macbook pro retina with Mountain Lion
    On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
    On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
    I am truly surprised that no one has noticed this MAJOR issue.
    Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
    On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
    Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
    In fact almost all of the trackpad functions have been selected.

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:

    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application

    empty the trash:  Finder > Empty Trash

    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive

    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions

    when complete, restart the Mac normally, Apple menu > Restart

    install Keynote from the Mac App Store
    let us know if this helped

  • IPhone 5 Calendar Issue: January 1, 1995

    I flew from the Eastern Time Zone into Central Time Zone, which is my home time zone, this afternoon, and tonight my iPhone 5 is telling me the date is January 1, 1995. Can anyone help explain why this is happening, and/or how to fix it? It sometimes switches back to the correct date, but only for a minute or less. I have restarted my phone twice and it has not worked, even when I kept my phone off for over an hour. When the date is January 1st, 1995, I cannot send texts, or go onto the internet, or use any apps using data. PLEASE HELP!!
    Much thanks

    Hello rossiegee,
    The article linked below details some useful information that can help resolve issues with an incorrect date on your iPhone.
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/TS3920
    Cheers,
    Allen

  • What are the major issues to consider in code review? Or performance analys

    What are the major issues to consider in code review? Or performance analysis?

    I would not recommend you to try to optimize performance by checking the coding.
    There is the code inspector which can do all which makes sense automatically.
    The above mentioned points are not the real issues.
    Instead of code review you should execute test cases and measure the exection time.
    1. With STAD if you want to get good time measurement
    2. With SE30 and ST05, if you want to have data for further anaylsis.
    Check total time (SE30), check whether DB part is large, then go to SQL trace. Do the check mentioned here
    /people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
    to find the SQL bottlenecks.
    The major point about SQL problems is index support, if there is no proper index support then the performance will be poor. Be aware, that problems are only visible, if you tables are filled.
    In a test system where you have very little data, you will never encounter performance problems.
    Check also the Top10 of the SQ30 hit list.
    Be aware that a proper performance analysis is not a 5 minutes job.
    Siegfried

  • Dear All,what are the major issues in implementation in sap hcm

    what are the major issues in implementation in SAP HCM project scope is PA ,OM,TIME, INDIA PAYROLL

    Hi Ramjan,
    Try to have a clear understanding of requirements and find the best solution in SAP. Keep as much as possible everything standard and based on SAP best practices.
    In PA look for a comprehensive enterprise structure. It's base for everything.
    DON"T do anything through development(ABAP code) as much as possible specially in PT and PY. Try to do claculation by PCRs and Schema.
    Regards,
    Omid

  • What are the major issues in implementation SAP CRM sales and CIC.

    Hi
    We are newly implanting the project to the mobile Manfaturing Company. Our Clint is going for are looking to implement the CIC interaction center win Clint and the Sales modules of CRM .
    We have some 3rd parry raw data with us with that raw data we are calling to the customers and we want create the opportunity in the CIC after that we will convert the opportunity as a sales with our other sales people. After  that  they will sale that product to that customers.
    We have the back end of the R/3 SD, MM modules implemented for Clint.
    Now 1) I want to know after implementation what are the major issues will come in the project normally for the conman  Sales and CIC Win Clint projects kindly give the some  issues normally come  and solutions  for the problems also.
    My motto is that if I know the issues I can make preparation  for that conman issues and I will make my project with good effective and smooth running ..
    with Regards,
    prakesh
    Edited by: prakesh on Dec 9, 2009 6:04 AM

    hi prakesh,
    firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
    secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
    regards
    shikha

  • Having major issues with InDesign CS6

    Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file.  Then when I relaunch, it is not allowing me to open the file again.
    In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
    I had to copy each layer on each page to create a new document.  NOT GOOD!!!

    SherwoodGirl wrote:
    Having major issues with InDesign CS6.
    Then post your qeustion on the Adobe forums is it's their software you're having problems with:
    http://www.adobeforums.com

Maybe you are looking for

  • Help with Spry Menu Bar 2.0 customization

    I am having trouble converting my original Spry menu to version 2.0. On my website http://bucknellprimaryschool.org/ the 'old' menu system works just great but not in iPads (ie the sub menu does not pop out). I discovered hat Spry 2.0 does work but I

  • Iphoto and Itunes not showing the same number of photos in albums

    why does the number of photos in an iphoto album is not the same when synching my iphone.  For example, in iphoto, my "family" album has 2700 photos, but in Itunes it only shows 2675.  I have included the videos also.  Thanks

  • Could Not Access Network Location

    Trying to install upgrade of ITunes on Windows. It installed Quicktime just fine. What's wrong here? Dell Inspiron 6000 Windows XP SP3

  • Userexit to Restrict the VIEW and MODIFY of the Sales Order

    Hello Everybody, I need to do the following task. I want to restrict to VIEW and MODIFY the sales order for particular sales office or sales group. I need  user exit for that. Please help me by providing brief information. Thanks M Rahman

  • Oracle Default Home Directory

    Hi, I have installed oracle10g enterprise edition,oracle 10g express edition and oracle 10g lite R3 in same machine.Now in this scenario what will be my default ORACLE_HOME directory??? Thanks in advance Edited by: 793097 on Sep 6, 2010 9:36 AM