Link between billing document and accounting document number

Hi Frnds,
When i receive a partial receipt (of an invoice) from a customer using f-28, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?
I have tried table BSAD and BSID.

Hi,
I will give you two options.
1)Goto FBL5n.Enter your customer number and company code.Select All items.
Execute.
Search for your billing document number using CTRL+F.Select that line.Click on display.
Here you will find the reference number and clearing document number also.
2)Goto VF02.
Enter your billing document number.Enter.
Press Shift+F4 or the path is:goto-->Accounting document.
You will get the accounting document number here.
3)Goto FB03.Key in the document number.Enter.
Regards,
Krishna.

Similar Messages

Link between outbound delivery and matriel documents of good receip

HI,
in which table we can find the link between outbound delivery and matriel documents of good receipt.
thanks

Hi!,
If you have posted a goods receipt for an outbound delivery, you should find in the header table MKPF for the material document the field MKPF-XBLNR completed with the outbound delivery number.
Then, if the document flow for the delivery has been updated correctly, in the table VBFA for the delivery (VBFA-VBELV), you should find the material document under VBFA-VBELN.
I hope this helps you!
Best regards,
Esther.

Same no ranges for both Billing doc and Accounting Documents

Hi friends,
My client requirement is he want to use same number ranges for both billing document and accounting document.
Is it possible?
Regards
Sasi

Hi,
For Accounting Documents...Create a number range using the TCode : FBN1
Give the range as the one which you specifed for the billing doc and make a check over the External Entry.
Assign this Number Range to Your Accounting Doc. Type.. using the Tcode OBA7.
Hope it'll work as per your requirement.
Regards,
Venkatesh.S.P.

Sync of Material document and accounting document during MIGO

Hi Friends,
Can we synchronize the Document numbers between Material document (WE) for GR (101) and Accounting documents created for the MIGO transaction????
We have 50 is assigned to WE. But, we have a gap in numbers of Material document number and Accounting document numbers??? though the document type WE is common for both.
I have seen that "Buffer" is the culprit. But, not sure how to fix that.
Appreciate your help in this regard.
Dev.

When the document type is same (WE) for both, how come the accounting doc has continuous numbers and Material doc has breaks ( from buffer)????
document type WE is same for GR for material document and accounting docu but number range are stored diffrentely.
OMBT is where u store the number range for material document
and this number range is assigned to group of materia doc we wf wo ww
OMBA is where u create diffrent number range for accounting document hear U assign WE to ur transaction code and in turn WE is assigned a number range what is created in OMBA, this number range is nothing to do with number range u have created in OMBT.
when ever u post the docunemt in system
SAp hav efixed the document type for GR that is WE
it goes in OMBA in the group of Material documents for goods receipts
check what is the year and number range assigned and current number so it assignes this number first
than it go to OMBA cheks what is the Tcode u are using and what is document type u have assigned to that tcode and it can be any WE or what ever u have assigned to that tcode
taking that doc type it goes and see what Number range is assigned say 50 and then checks company code and year for this 50 and get the number for accounting doc
so i think its is clear that material and account are 2 diffrent ranges
skiping of numbers might be due to buffer
also go throught following post it will be helpfull
GR NO SEQUENCE - MISMATCH
hope this helps

Link Between billing document and Accounting document

Hi,
Need the link between VBRK and BKPF.
Req to VBRK-VBELN = BKPF-XBLNR.
But length varies. Error occurs. Any other method to come for linking Billing document and accounting doc

hi Meenakshi,
Check with this i hope it will work
you can have the data from BKPF through fields like AWKEY and AWTYP and VBRK (vbeln).
in bkpf there is a field called AWTYP in which you have to specify 'VBRK',and you have split AWKEY depending o upon the vbeln .
bkpf-awtyp = 'VBRK'
bkpf-awkey = vbrk-vbeln
bkpf-bukrs = vbrk-bukrs.

How to syncronize billing document and accounting document numbers?

Hello,
In RV60AFZC USEREXIT_NUMBER_RANGE_INV_DATE I changed the number range for the billing document from what is configured for F2. I need for the accounting document number to be the same as the billiing document number. I have created an new external accounting document number range equal to the new biliing document number range, but the accounting document number is still being assigned from the number range that is configured for RV. How can I get it to pick up the new accounting doc number range?
Thanks much,
Joy

Dear satyam
Go to SE16 / BKPF, give the accounting document number reference in "Document number" and execute, so that you will get the respective billing document number. Make a note of it.
Now go to again SE16 and give table VBFA and give all the billing document references in "Follow-on doc" and maintain "C" in "Prec.doc.categ." and execute.
Alternatively, you can try with table joining BKPF and VBFA in SQVI.
thanks
G. Lakshmipathi

Link between table SOFFPHF and FI document

Hello Experts,
I have a requirement to find all the FI documents with the attachement .
We have a table SOFFPHF (SOFF: Files of Physical Information Objects) where i can get the details of attachement, But now how to link this table with the FI document which has this attachement.
I tried the link using table SRGBTBREL , But i am not getting entries from table SOFFPHF in this table.
Thanks.
Regards,
Ganesh.

Hi Shivkumar,
When you enter the item category as 'D'then a purchase order is
classified as a service purchase order.
When you use ML81N to perform a service entry, then automatically
the GR document is generated.The basis for this is a service can
only be performed and cannot be stored.
The PO history table will give you a good idea of the relation.
You can check the EKBE table.Enter the service entry sheet number
in the field LFBNR of EKBE table, enter the SES number, you will
see all the documents associated with it.

Link between Service Call and Marketing documents not working

Hello all,
I found a field in Marketing Documents - Rows data - that should be the link between a Service Call and the Marketing Documents.
The field is for example "INV1.isSrvCall" but, even if I create an Invoice from the Service Call, the field will be populated with the value "N".
Dows anyone knows how to make this field work? Or any workarround to make the connection between a Service Call and the generated documents?
Thanks in advance,
Kind Regards

The problem with SCL4 is that SAP updates it way too late in the process to be meaningful while in the module. You create a service order, then go into the expense document. That is when we need to know the service call id and the internalsn of the equipment being worked on Only when you get out of the service module do SAP post to SCL4.
The data (before writing to SCL$) exists as a veriable on the original service form. But can we access it from the expense document?
The question is how to access the data (service id) on the original service form from an expense document within the servide module. It is the service form, and that is currently not in focus, so I do not know if you can access it as a varaible, while in the expense document (sales order or invoice) that is in focus.
Can any one help with this/
David

Difference in currency rate between customer order and accounting document

Dear gurus,
While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
I want SAP to calculate currency which is entered in customer master data. It might be M,B etc.. According to the CUSTOMER.
How can I fix this issue?
Thnks regards,

Hi,
In the copy routine from Sales Order to Billing, copy the exhcange rate from sales order.
And then the billing will get the same exchange rate as in sales order and thus will also pass the same to the accounting.
Regards,
SDNer

Difference in currency between customer order and accounting document

Dear gurus,
While I am cretaing customer order SAP calculates currency from Exchange Rate="B" at OB08 screen. This situation results because of Currency type in customer master data. But in the accounting document SAP calculates currency from Exchange Rate="M" at OB08 screen. As a result; this is causes problems.
I want SAP to calculate currency which is entered in customer master data. It might be M,B etc.. According to the CUSTOMER.
How can I fix this issue?
Thnks regards,

Hi,
This is a complicated scenario.
There are 3 currencies involved in any transaction
Document currency (from customer master)
Condition type currency (from condition record)
Local currency (Currency of company code )
During account posting in FI, the document currency will be converted into local currency and posting in local currency will be made. Also there is a posting in document currency also. For the conversion between document currency and local currency, by default M is used. For other exchange rate types, it should be enabled by means of user exits in sales order or invoice. The exchange rate which is available in invoice for this conversion (doc currency to local currency) is copied to acctg documnent. It is not freshly calculated in accounting document.
Conversion from customer currency to document currency happens either through M or through the customer master exrate type.
Now you decide how you want to handle the scenario. Customer currency to document currency can be done as per the customer master you maintain. But if you want to convert document currency to local currency (provided customer currency and doc currency are same), then only M will be used in standard.
If you are in a scenario where all the 3 currencies are different, then the way by which the system calculates the exchange rate is through an indirect triangulation process, which is little complex. In this case, it will use only one exchange rate type. Hence this scenario in your case will have problem. If you test all these scenarios, you will come to know.
We faced this problem an year ago and then finally realised that it is not possible to use two xng rate type in one SD cycle. This is because the exchange rate type is stored in VBAK, VBRK and so on and hence it is not possible to use two xnge rates or the rate maintained in customer master throughout the cycle. The sales transaction is controlled by Cust master and FI transactions are controlled by M

FM for linking deleted sales order and accounting document

Hi there,
I have this scenario:
-I create a sales order and make a certain amount of downpayment.
-At the save of the order, an accounting document is created in BSEG table with reference to this order (BSEG-VBEL2).
-I delete the order that I created in step 1.
-The accounting document still exists in BSEG.
Question:
A direct select on BSEG with vbel2, takes a very long time.
Can anyone suggest a way to improve the performance, or does anyone know of a Fuction Module that I can use?
Thanks,
Deepti

Hi,
Con't you use alternative table, Example insted BSEG use BSID and create a index on VBEL2 to improve the performance..
Regards,
Srinivasa M

What is the link between schedule lines and delivery document item level

Can any one please explain me what is the link between the schedule lines of the order/scheduling agreement and the item level of the delivery.
Is there any link between VBEP and LIPS ?

Hi
Most of the item level data in delivery doc is copied from Schedlue lines in Sales order for eg delivery date
So u may say that schedule line in sales order becomes the line item in Subsequent doc that is in Delivery doc .
The table u are talking about i.e VBEP is related to sales doc and it contain data for Schedule line in sales order and the other table i.e LIPS give the delivry doc related data at item level.
Hope this help

Link between billing doc and cancelled billing doc

Hi,
If there is a cancelled billing document then how can I find for which original document the cancelled document was posted? What is the link between Original billing document and cancelled billing document. I mean is there any database field level link?
Thanks!!
Regards,
Sriram.

Hi,
Thanks for your reply. Is there any function module to get the original and cancelled document.
Thanks!!
Sriram

Tell me the link between Purchase Requisition and Sales Order Number

tell me the link between Purchase Requisition(MEREQ_TOPLINE-BANFN_EXT) and Sales Order Number(COBL-KDAUF)

Hi Puja,
If you have created sales order for matrial which has both procurement type,after MRP run you will get
planned order.This planned order you can convert to purchase requisition for external procurement or
subcontracting.
You will find sales order number in details of purchase requisition ( ME52N) in Account assignment tab.
Hope this help you.
Regards,
Raja

Link Between Material Document and Accounting Document Tables

Hi Abapers,
Can u pls tell me, How can i link Material Document Tables (MSEG and MKPF) and FI tables (BSEG and BKPF)?
The actual scenerio is when we confirm order in Production Planning. I want to pickup value from FI tables.
Thanx in advance.
Regards,
S.GUNA

Hi Guna,
you can always use "Environmental Analysis" of the tcode where you are confirming the order., for finding the underying tables.
1. Get the main program of the Tcode (order), by system status menu facility.
2. Goto se38 and give the main program name and click the
Environmental Analysis button, the icon adjacent to where-used three pegged icon.
this will list the tables . narrow down to FI segment and find out.
Wishes,
Rajagopalan

Link between billing document and accounting document number

Similar Messages

Maybe you are looking for