LS24 stock showing up as negative with stock type Q

Hi Gurus,
Can anybody please help me through this issue. The quality team passed an inspection lot and i see that there is a mterial doc generated with movement type 321 with a storage type 922, storage bin TR_ZONE stock category Q and posting change number on the WM tab of the material doc. Now i also see that there is this quantity of material showing up in LS24 with a negative sign and stock type Q. Now what do we need to so that the entry for the material goes away from LS24 and that the user can move this material from storage type 922 to 003 (where we usually store all tyhe materials).
Thanks
Anusha

As susggested, i tried to creat the transfer order from LU04 and/or LT06 and i get the error message.
No quants exist for posting changes
Message no. L3094
Diagnosis
No quants requiring a posting change were found.
Procedure
Check your entries.
Also to give little more background on why this problem could be happening is, all these days we used todeal with 101 movement type for international purchases. But recently we went with 107 and 109 movement types for international purchases. The advantage of doing this was, some of our vendors were on 30 days payment terms and it usually takes 60 days to get the material via ocean to US. PLus we take the ownership of material in Asia. So the way we handled this was the moment ownership is taken we would do a 107 (here inspection lot will not be created as the material is still on the water, this is made in config), which would then allows us to post invoice and process for payment, then finally when the material arrives at our plant in US, then we would do a 109 (during this inspection lot will be created, i made this entry in config). I'm starting to think that this could have impavceted somewhere in WM. By the way we only have one plant that is warehouse managed, rest of the other plants are not WM managed. I hope this background will help is solving this problem
Thanks
Anusha
Thanks
Anusha
Edited by: anusha vemulapati on Aug 16, 2011 2:54 PM

Similar Messages

No stock showing in Inventory on date stock report

Hi
I have created a Stock on date query at plant material level using standard cube 0IC_C03
to get stock quantity on posting date i have restricted 0TOTALSTCK
by 0CALDAY variable .
Correct me if any thing wrong to get on date stock.
When i m executing that report for date 20.07.2009 , it shows 0 qty for a given Plant(1001) and a given material(ABC)
where MB5B report in R/3 with same date show sum stock qty.
again i executed the report with 17.07.2009 , on which the material(ABC) was lastly transacted for that given plant(1001)
for this date i m able to match the qty with MB5B.
Then i check sum other stock report which is at 0CALMONTH level wen executed with 07.2009 shows correct qty.
Now my question is y it is showing 0 qty wen the stock is there in it ? is query definition not proper to get stock on date ?
Thanks and regards,
Sonal....

Hi,
No need to restict.
in rows, calday, plant, materials
in column 0TOTALSTCK.
for 2 days data will look like this.
19/07/2009 -- 1001 -- 011235 --- 256 KG
20/07/2009 -- 1001 -- 011235 --- 280 KG
stock as on 19 in MB5B, after recipts and issue is 256 KG.
stock as on 20 th in MB5B, after recipts and issue is 280 KG.
based on issues and recipts, data will be added to total stock.
yes, stock will be last date posting date. as on today we can validate data till yesterday.
one more thing for plant whose values are not matching, did to drill down stock type and stock category and check data.
use RWBE t-code also for validation.
Best Regards.

MB1B with mov. type 311 - error message

hai experts
I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
Pl. help me to come out of this problem
Regards,
sree

Your deletion and recreation has nothing to do with this message, here am very certain.
But to identify what the message caused, you have to give the full message along with its message number (double click message)
It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

Automatic batch number in migo_tr with movement type 301

Hi!
I am trying to do a transfer from a plant to another with MIGO_TR movement type 301.
The thing is that I must enter manually the batch number in the destination plant.
Is there a possibilty to configure the system in order to copy in batch number field for destination plant the same batch number entered in the plant from where I want to transfer?
Thanks!

your system does not work like designed
please read this very old but release independend OSS note 555 - Batch treatment during stock transfer and transfer posting:
Key word: Transfer batch
If you enter materials for stock transfers or transfer postings with movement types 301 to 316 via collective processing and in this case enter the batch number for materials to be handled in batches, the system automatically sets 'Receiving batch' equal to 'Issuing batch'.
Additional key words
Cause and prerequisites
The collective processing screen does not provide space for an additional transfer batch in the two lines provided for a material movement.
Solution
During the stock transfer of material, the batch is usually retained. If you want to change the batch number, you have to enter the item in question step by step (F8=New item).

Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324

Hello,
I have post the depreciation of asset, which is legacy asset & value arise through AS93.
Now i realized that the i have charged more depreciation. hence While doing Debit manual depreciation of Asset through T code ABAA & using transaction type 645, system showing error message,"Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324".
Please help us to resolved this issue or any other way to write off the depreciation which is excess charged earlier for legacy asset.
Thanks & regards,
Pramod

Hi,
According to me you can create a new transaction type which is exact opposite to depreciation key 640 and then with that transaction type you would be able to post the unplanned depreciation by which the asset value will increase.
Regards,
Malhar.

Negative stock allowed for a material with SDG assigned

Hi All ,
I have raw material for which stock determination group assigned in MRP 2 view for issuing the componets .
I also marked allow negative stock in plant/storage location view .
Normally if the stock determination group is not assigned and if the negative stock allowed in plant/storagelocation is checked then during backflush though the required qunatity is not availabe then the stock will be marked in negative quantities , so that when GR happens for this material will overcome the negative quantity .
But since stock determination group is assigned , though the negative stock allowed is checked the backlogs are created in MF47 rather making the stock of the material negative [ I assume this behaviour is because the SDG is determined dynamically ]
Is there any setting required to not sit these backlogs in MF47 when the negative stock allowed in plant/storagelocation is checked
Thanks
Sireesha

Hello Sireesha,
Even I have similar issue, can you please let me know if this is fixed for and how did it work.
Thanks
Chandra

Inventory Valuated Stock Value is not matching with R/3

Dear Friends,
we are in a big mess.Needed your help urgently
We are in sap netweaver 2004s.We are implementing the standard business content only for one of our client.We have loaded the Inventory data into BW by following "How to handle the Inventory Management" document.
We have loaded the inventory data into 0IC_C03 using standard transferrules and update rules.
The sequence we followed as:
IN R/3
Filled the setup tables for during the posting free time(non-business hours)
Stock intialization
Material Movements
Evaluations
IN BW
We had loaded the data into only 0IC_C03 cube using standard update rules(no changes done)
2LIS_03_BX-Generate intial stock with no marker update unchecked
2LIS_03_BF-Full update with no marker update checked
2LIS_03_UM-Full update with no marker update checked
When we compared the data between R/3 and BW they are many materials "Valuated Stock Value" is not matching with R/3.For some materials value is matching with R/3 but for some other materials its not matching with R/3.Some materials are showing the negative figures for Valuated Stock Value.
But the valuated quantity value is exactly matching with R/3 for all the materials.
We have tryed to many ways in the past 10 days to find out the solution.We have followd the notes 589024 and implemented the formula.But no luck so far.
Needed your help..Any suggestions would be highly appreciated.
Please help us with your inputs.
Thanks in advance.
Regards
Soujanya

Hi Sudheer,
No We haven't implemented this note.
In start routine we already have the first start routine in the note.
INSERT BEGIN
loop at DATA_PACKAGE.
    if DATA_PACKAGE-stockcat eq 'V' or
       DATA_PACKAGE-stocktype eq 'V'.
      delete DATA_PACKAGE.
    endif.
endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
INSERT END
We should comment the above start routine and follow the remaining section as below?
==========================================================
Notes:
However, if you want a report of these consumption values, proceed as follows:
1. Do not use the start routine listed above.
2. Create two new key figures (cumulative values):
   1. Material consumption value (ZVERWERT, for example) with unit 0BASE_UOM
   2. Material consumption quantity (ZVERMENGE, for example) with unit 0LOC_CURRCY
3. Include these in the InfoCube definition.
4. Update these key figures from 2LIS_03_BF as follows:
-> material consumption value:
IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
    OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
    OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
    OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
    OR COMM_STRUCTURE-processkey EQ '106'   "Stock Adjustment Other
    OR COMM_STRUCTURE-processkey EQ '110' ) "Issues from Stock
                                            "Transfers
   AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
   AND COMM_STRUCTURE-cppvlc <> 0
   AND COMM_STRUCTURE-stockcat EQ 'V'
   AND COMM_STRUCUTRE-stocktype EQ 'V'.
result value of the routine
    RESULT = -1 * COMM_STRUCTURE-cppvlc.
if the returncode is zero, the result will be updated
    RETURNCODE = 0.
ELSEIF ( COMM_STRUCTURE-processkey EQ '000'   "Other Receipts
    OR COMM_STRUCTURE-processkey EQ '001'   "Goods Receipt/Vendor
    OR COMM_STRUCTURE-processkey EQ '004'   "Material Transfer/"Receipt
    OR COMM_STRUCTURE-processkey EQ '005'   "Stock Adjustment InvD
    OR COMM_STRUCTURE-processkey EQ '006'   "Stock Adjustment Other
    OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock
                                            "Transfer
only movements which are relevant for stock control
   AND COMM_STRUCTURE-cppvlc <> 0
   AND COMM_STRUCTURE-stockcat EQ 'V'
   AND COMM_STRUCUTRE-stocktype EQ 'V'.
result value of the routine
    RESULT = COMM_STRUCTURE-cppvlc.
if the returncode is zero, the result will be updated
    RETURNCODE = 0.
ELSE.
if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0..
-> material consumption quantity:
The code is the same, but COMM_STRUCTURE-cpquabu replaces COMM_STRUCTURE-cppvlc.
-> The characteristic value calculation is the same for the other key figures.
5. Update these key figures from the 2LIS_03_UM in the same way.
=======================================================

Negative closing stock on back date

All SAP Gurus,
We have made GR (MIGO) on todays posting date.
And issued the material on yesterday's posting date (past date), (where there was no stock on that date).
System allowed us to issue the material on past date, on which there was no stock.
And now showing closing stock on previous date as negative.
We want to avoid such negative closing stock.
What configuarational changes we need to do?
Regards,

hi
This is standard functionality .. u can not do anything in std. as there is no error message available for this
u can do one thing In OMSY u can remove remove the check mark in the ABp (Allow Back Posting) check box for your Company Code, to stop postings in the closed periods.
or in MMRV do not tick posting in previous period
Vishal.....

How to revaluate negative closing stock value in SAP B1?

Hi all,
I am trying to revaluate those items with the negative closing stock value using Inventory Revaluation. I choose Inventory Debit/Credit for the revaluation type and key in the item code, quantity, +ve value in debit/credit, G/L increase and decrease account.
After I added the Inventory Revaluation successfully , I go and check in the Inventory Audit Report for the specified item but found that the item still with the negative closing stock value.
My major concern here is the items with negative closing stock value do not have any in stock quantity. Can I adjust the negative closing stock value of the items with zero quantity?
Thanks.
Best Regards,
Xavier

Hi all.
Just found out why I cannot do the negative stock value revaluation. When I want to do the inventory revaluation for the items of negative stock value with zero quantity, the journal entry will debited to the wrong account, that is 507040-00-000 (Price Difference Account).
Inventory Revalution for item with zero quantity:
[http://img33.imageshack.us/img33/6596/invrevaluation.jpg]
Journal Entry:
[http://img84.imageshack.us/img84/879/81238835.jpg]
Sample of Charts of Accounts:
[http://img31.imageshack.us/img31/2078/coaq.jpg]
When I do the inventory revaluation for the items where the in stock quantity is greater than zero, the journal entry will debited to the correct account, that is 105011-00-000 (Consumables account).
Inventory Revaluation for item with quantity greater than zero:
[http://img819.imageshack.us/img819/5711/invrevalution.jpg]
Journal Entry:
[http://img24.imageshack.us/img24/7136/80015631.jpg]
The items are under the same item group - Consumables
[http://img543.imageshack.us/img543/2347/itemgrp.jpg]
I do not why this will happen when I try to revaluate the items with negative stock value of zero quantity?
Kindly share with me your opions.
Thanks,
Xavier

Stock price is in negative (when material ledger is activated)

Hi All
While reversing the GRN for import PO system is throwing the error message stock price is in negative.
Please help it's URGENT.
B. Kandre

Hi,
As it's your sand box and you don't need to fix the root cause of the error, try to execute MMPV with option "Close period only".
Regards,
Szymon

Negative closing stock in inventory

Hi Gurus,
Iam getting -ve closing stocks when iam running the report on inventory cube 0IC_CO3.
1.Iam using 0valuated stock as my keyfigure for closing stock
2.I Have checked in MB5B in R/3 side and came to know that in movement type 641 which is related to goods issued some batch numbers are getting repeated in BW side.
For EX:For matrerial code FC35025RT and the batch no 8301 the quanity issued is 36 in R/3 and its showing the same in BW upto PSA, but when loading into the cube its getting loaded as 72 instead of 36.
3.The cube is on built on 3.5.
Please advice.
Regards
Amar.

Hi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
0VALSTCKVAL      " For Value
0VALSTCKQTY      " For Qty
0CALMONTH        " For Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY     " For Qty
0CALMONTH       " For Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                " value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection, drag and drop following InfoObjects
0VALSTCKQTY    " For Qty
0CALMONTH      " For Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
Thanks
Reddy
Edited by: Surendra Reddy on Jun 21, 2010 7:51 AM

Clear the negative from stock in transit

Hello,
I am looking at transit stock and have several cases where for intercompany PO the delivery has been created and GI'd but the receiving plant makes excess GR for the actula qty hence creating negative stock in transit. Apart from asking the origin plant to create a delivery + PGI. what other solution would be available to clear the differences?
Thank you.
Sai

Hi
This happens because as you say the receiving plant have received more than was on the delivery, However if they actually have the stock I personally thik that is what they should do to keep the stocks correct.
In theory you should have stock showing in the sending plant that you do not have as the receiving plant has it and so to keep the stocks correct and to keep the finances correct you should raise another delivery for the extra stock (on the same PO/STO doc) and when you issue it the negative will dissappear.
Remember ALL negatives appear fror a reason and should not be just 'cleared' without some investigation.
In this case you know the answer so you can ;fix' it
I hope that this helps
Frenchy

Transfer posting of subcontracting stock with mvt type 541 from project stk

Hi,
we run project MRP and the requirement is raised for subcontracting item also ,after converting the PR into PO when I try to transfer post material in MB1B using 541 ,system shows Error Purchase order does not contain any item even I have material in my project stock,what may be the reason?
Regards
Kantha

Hello Kantha,
The components which you provide for a vendor are manged in a vendor-related special stock, O. This stock is updated at plant level, becuase material is actually not in your plant. If you want to provide stock to vendor the avialble stock types in subcontracting are from un restricted use and in quality inspection.
When you provide componets to vendor via transfer posting this needs to go from only unrestricted use stock to the stock of material provide to vendor movement type is 541.
So to execute the transfer posting for the stock of material provided to the vendor, you have to specify special indicator O, if not the transfer posting will not differ from normal transfer posting.
Also T-code MBLB will help you in evaluating the stock of material provided. So you need to transfer the stock from project stock to unrestricted stock to carry out the transfer.
Br,
Tushar

Make to order and stock both in one material with consignment

Hi Seniors
FERT Material = XYZ which is being used for Make to Order and Make to stock both.
In case of make to stock scenario from GR u2013 101 and PGI made @ std price. At the time of Consignment 631 mvt. No accounting document is generated. As per my knowledge its fine. No issue.
In case of Make to order scenario for above material.
Q.1   At the time of goods receipt (101 Mvt) from production order, accounting document is generated at the rate of Per unit target cost of production order and no variance shown on production order. Why not accounting document is created at Std price of Material?
Q.2 At the the time of consignment an accounting document generated with following entry.
    Finished Goods Inventory      Dr
    Price difference                   Dr
                    Finish Goods Inventory Cr
Why accounting document is generated at the time of consignment in case of make to order scenario? Pls confirm is this a sap standard behavour or anything wrong with me. As I told earlier that in case of make to stock when we make 631 mvt there is no accounting document generated.
Note: My standard price is on the base of mix costing using two production versions. Every time we create production order in each version.
Regards
Imdad

Hi Imdad
Q1: Why not accounting document is created at Std price of Material?
Check your req class... There is a Field called "Valuation"... your valuation depends on whether you select M or A there... You can decide to valuate based on CK11N std cost estimate or based on Sales order cost estimate / Prod order cost estimate
So, in a nut shell, you can configure the system to generate acc doc at CK11N Std cost also
Q2. Why accounting document is generated at the time of consignment in case of make to order scenario?
In my opinion, your MTO stock is maintained in Table EBEW.. Pls check that... WHen you do GR from Prod order, it resides in EBEW table..
However, when you send it as a cons stock, the link to sales order is lost and your stock is no longer a MTO stock.. Hence, it is valuated at CK11N Std Cost.... If there is a diff between CK11N cost and GR Price, then PRD is generated... Thats why you are seeing PRD in your case
BR, Ajay M

Issue with stock qty of component in Structured Articles in SAP BI

Dear Experts,
We are extracting stock in BI through SAP standard data source. We have used 2lis_03_bx and 2lis_03_bf data sources. We are facing issue with stock data validation due to structure articles (pre-pack) available in SAP source system.
We have stock of structure articles available at DC in source system. When we extract this information in BI, this article gets split into its components automatically. Due to which stock of components articles gets increased with huge amounts.
To analysis it in further detail, we have created below scenario:
Article Document Number: 4900000827
Article Number (Pre-pack): 300000082901
Article Number (Component): 300000082002
Stock of pre- pack article at this article document number: 174 pc
Stock of component article at this article document number: 348 pc (due to splitting of pre-pack article) + 151 (its own stock movement). Total stock for this article is 499. But actually total stock for this article should be 151 only.
As per our Business requirement, pre-pack article should not be split into its components. And stock in BI should be totally in sync with SAP stock.
I kindly request you to suggest the solution to rectify the same.
Thanks in advance.
--Vikas

Hi Vikas,
Check the OSS note L 1320386 - Frequently asked questions regarding BW Trade Foundation too.
Regards,
Rajesh

LS24 stock showing up as negative with stock type Q

Similar Messages

Maybe you are looking for