MAC Authentication does not work

My MAC Authentication does not work.
I have a ACS 3.0 server set. the MAC address is set in the user name field and in the password field.
I can ping the ACS, I can ping my AP, I can ping my client.
I don't want WEP and I don't want LEAP just MAC. So I set my authentication to "Open with MAC" My client has WEP set to NO WEP and authentication to OPEN
I have the latest drivers for both AP and my 350 Client.
I see that the client is associating and disassociating back and forth non stop. My AP log is full with the following message:
Station 0009.7c9f.xxxx Authentication failed
this is my config:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname GOM_1200IOS
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
server 10.1.2.197 auth-port 1812 acct-port 1812
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius wlccp_rad_infra
aaa group server radius wlccp_rad_eap
aaa group server radius wlccp_rad_leap
aaa group server radius wlccp_rad_mac
aaa group server radius wlccp_rad_any
aaa group server radius wlccp_rad_acct
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login wlccp_infra group wlccp_rad_infra
aaa authentication login wlccp_eap_client group wlccp_rad_eap
aaa authentication login wlccp_leap_client group wlccp_rad_leap
aaa authentication login wlccp_mac_client group wlccp_rad_mac
aaa authentication login wlccp_any_client group wlccp_rad_any
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa accounting network wlccp_acct_client start-stop group wlccp_rad_acct
aaa session-id common
enable secret xxxxxx
username Cisco password xxxx
ip subnet-zero
iapp standby timeout 5
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 9DF1C10BF11A transmit-key
ssid GOM_1230
authentication open mac-address mac_methods
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
channel 2462
station-role root
no cdp enable
dot1x reauth-period server
dot1x client-timeout 600
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.43.45 255.255.240.0
no ip route-cache
ip default-gateway 172.16.47.254
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
access-list 700 permit 000a.b74c.e8c9 0000.0000.0000
access-list 700 permit 0009.7c9f.d6e0 0000.0000.0000
access-list 700 permit 0006.25b1.2f79 0000.0000.0000
access-list 700 permit 000a.b78b.2d19 0000.0000.0000
access-list 700 permit 000b.5f6e.77c8 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
access-list 701 deny 000b.5f6e.77c8 0000.0000.0000
access-list 701 permit 0000.0000.0000 ffff.ffff.ffff
no cdp run
snmp-server community GOM_AP1230 RO
snmp-server enable traps tty
radius-server local
group AP1230
user brazil nthash 7 1249523544595F517972017912677A3055325A25770B08770D5C5B4E4478087605 group AP1230
radius-server host 10.1.2.197 auth-port 1812 acct-port 1812 key 7 00233C2B
radius-server retransmit 3
radius-server attribute 32 include-in-access-req format %h
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 5 15
end
What is wrong?
Thanks very much for your help.

I figured out what was wrong so thank you for stopping by.
I will publish the config for other people to see.
Regards,

Similar Messages

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

10.4.4 Mac Help does not work

I just upgraded 10.4.3 to 10.4.4. Now Tiger Mac help does not work. Other software help does work, at least those I have checked like Word, Safari, and a few others I have checked. But in the Finder going to help in the Menu bar does brings up the help window, but try to click a link like What's new in Tiger or typing a query into the search window produces nothing. All the software seems to be working fine, at least what I have checked. I have redownloaded and re-installed making sure virus software is off to no avail.
Any help would be appreciated.

I tried the steps mentioned before, and thought I would give them one more try. Initially, I had success in that the Help Viewer opened to the default Mac Help view, and when I typed in a find term, lo & behold a list of results appeared! Alas, my visions of success vanished when I clicked on one of the results, then View.....nothing happened!
I returned to the main menu, and found none of the links would work, and neither would the search function!
It appears a link may work the first time, but none after that.
I also noticed that (repeating the Cache & Preference removal steps) that they repopulated with the files when Mac Help was initiated, and, as before, would allow one link acivation to occur, but none after.
I suspect there may be a conflict with some other applications Help feature, but made sure to activate ONLY the Mac Help with no other Application having been run after restart. The only other possiblity is that some toolbar non-Mac OS X help apps like Magic Menu, Quicken, & iPod conflict, but these are all I have!
If any one having this Help Viewer problem has similar installations, or knows of any conflicts with these; or, how I can temporarily disable/remove the associated help without uninstalling them, please post a reply.
Powerbook G4 (17") Mac OS X (10.4.4)

My mac camera does not work ! please help i need my camera for an interview !

my mac camera does not work ! please help i need my camera for an interview !

CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

NGS Sponsors authentication does not work in case user has non-English character in his password

Hi,
we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
On Radius server I can see these error messages:
User XXXX was denied access.
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
As soon as an user changes his password and uses English characters only, it resolves.
I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
Many thanks for your help.

A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed.

HT3964 Resetting the smc for my Mac pro does not work...the power still does not turn on....any suggestions?

I am unable to power up my Mac pro desktop. I have tried resenting the smc and still does not work...any suggestions?

The warranty is worldwide. You should not need your receipt, Apple will have a purchase record - or at least a manufacturing date record and you should not be even close to the end of the one year warranty.
In Thailand the support phone number is 001800 4412904
In Canada call English: 1-800-263-3394 or French: 1-800-263-3394
Are you using the Canadian support site? www.apple.com/ca

CE7305 - Transparent mode authentication does not work.

Hi,
Im doing a trial content engine 7305 for my customer. Everything worked well so far with the box except with the authentication feature.
Authentication work well on proxy mode but when I turned it on with transparent mode it does not work. My customer is using LDAP for user authentication.
I suspect there is something that I did not turn on in the configuration.
Attached herewith is the show tech of the Cisco 7305 content engine.
Please advise!
Thanks in advance,
Raymond Hew

Hi Zach,
My customer is using Novell LDAP.
Right at the moment the CE is already working with the auth. after rebooted the CE 7305. Just can't explain why but it works after rebooting.
Thanks for your fast respond.
Best regards,
Raymond Hew

USB 3.0 Hub attached to a Mac Mini does not work

I have already 2 USB 2.0 hubs attached and work perfectly. I want to add a 3.0 USB powered hub but it does not work. The USB is a Iogear 3.0 USB Hub.
Thank you

Does any USB thing show up?
Of not...
USB reset...
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Most of the default Mac Apps does not work after Mavericks Upgrade

Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.

Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
          iMac (20-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
Startup Items:
          FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
          HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
          HP IO - Path: /Library/StartupItems/HP IO
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
          MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
          VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
          WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Western Digital My Book 1110 999.5 GB
                    WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
                    PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [failed] com.google.GoogleML.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.logmein.logmeinserver.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.wdc.WDSmartWareServer.plist
          [loaded] rapiback.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.logmein.logmeingui.plist
          [not loaded] com.logmein.logmeinguiagent.plist
          [not loaded] com.logmein.logmeinguiagentatlogin.plist
          [loaded] syncmateStarter.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.facebook.videochat.[redacted].plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          AirPort Base Station Agent
          EarthDesk Engine
          LMILaunchAgentFixer
          AdobeResourceSynchronizer
          RealPlayer Downloader Agent
          Windows Phone 7 Connector Agent
          iAntiVirus
          TextEdit
          StatusMenu
          HP Scheduler
          WDQuickView
3rd Party Preference Panes:
          Application Enhancer
          DivX
          EarthDesk
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          MacFUSE
          WDQuickView
Internet Plug-ins:
          AdobeExManDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          DirectorShockwave.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
          Unity Web Player.plugin
          WebEx.plugin
          WebEx64.plugin
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          mds
               2%          WindowServer
               1%          mds_stores
               1%          LogMeInGUI
               1%          RealPlayer Downloader Agent
               1%          EtreCheck
               1%          FanControlDaemon
               0%          uTorrent
               0%          notifyd
               0%          networkd
Top Processes by Memory:
          1.00 GB            mds
          106 MB             mds_stores
          78 MB              Google Chrome
          49 MB              Finder
          45 MB              WindowServer
          40 MB              Google Chrome Helper
          37 MB              VLC
          29 MB              uTorrent
          20 MB              EtreCheck
          16 MB              DashboardClient
Virtual Memory Statistics:
          43 MB              Free RAM
          989 MB             Active RAM
          934 MB             Inactive RAM
          447 MB             Wired RAM
          4.25 GB            Page-ins
          454 MB             Page-outs

Newest Mac Pro does NOT work with CC14 - Will Adobe address this or not?

I have a Mac Pro late 2013 - the "trash can" - and when I tried installing Premiere CC14, it crashed multiple times before even completing the program's initial bootup. I had to install CS6 just to get operable, though this does not help me open the CC14 projects I have inherited. I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro. I have all the Adobe permissions set to "Read/Write" and it shows absolutely no speed improvements over a much less expensive iMac. The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro... And I'm having a hard time finding anything resembling an official statement suggesting this is anywhere close to a reality. I have many After Effects plug ins, and while yes: They are 3rd party plug ins, these are not just electives - They are part of my arsenal that my loyal clients have come to expect.
For 15 years I have used After Effects, Photoshop and Illustrator, all 15 of them on a Mac. In all that time I have NEVER experienced this kind of vagueness, finger pointing, and dodgy avoidance. There seems to be an allergy to making an announcement that anything resembling a coordinated effort is going to happen.
Why would I buy "the fastest" Mac if Adobe didn't work with it? MAC STORE staff didn't seem to think this was going to be an issue... Yet I can't find any official date as to when CC14 is projected to work with AMD architecture.
I'm feeling a lot like I did when Mac juked us with FCP-7 to FCP-X "upgrade.' Et tu, Adobe?
-JOHN BEYER
(PS - Yes I had Adobe Creative Cloud assistance help me troubleshoot)

No offense meant, but did you come here to ask for help, or are you just complaining? Because it seems an awful lot like the latter...
AlphaJB4 wrote:
I have a colleague who uses a $1.5K laptop, and it works logarithmically faster and better with CC14 than my $4K new Mac Pro.
So does CC2014 work on your Mac Pro or not? The laptop doesn't "work logarithmically faster..." than your Mac Pro if the software isn't working to begin with. Hyperbole, much?
The CUDA feature is worthless unless Adobe develops a way for it to take advantage of the hardware configuration of the Mac Pro...
CUDA isn't available on the new Mac Pro. OpenCL is. If you have the CUDA preference panel installed due to another piece of software putting it there, you're better served by deleting it. It's not going to help you at all on the new Mac. It may, in fact, cause problems.
Pr CC2014 works fine with OpenCL on the new Mac. Ae doesn't, but Adobe has never said Ae does or would. Anything you do in Ae is going to be CPU-bound. If Pr is crashing, then it likely means you have something else on your system that's mucking things up. Did you recover your user directory with something like Time Machine when you installed your new Mac? Was your user directory originally on some other Mac? What happens if you create an entirely new user from scratch, without restoring the home directory, and then try to kick Pr into gear? Does it run?
Provide some details and perhaps someone can help.

Mac Help does not work

When I am in the finder, and select Mac Help from the Help menu, the help window appears for a few seconds, does not allow me to use it, and then closes again
Hence I do not have access the the Mac Help database
what to do?

Help Viewer crashes or shows blank....
http://discussions.info.apple.com/webx?[email protected]@.6897a2ae http://www.thexlab.com/faqs/helpviewer.html
This is a common bug in Panther. The solution to this problem is simple though:
• (~ means your home directory)
If the search field is not in the top of the window.... click on the oblong button at the top right hand corner...that should open the Toolbar and display the search field.
Go to ~/Library/Preferences and delete the following files......
com.apple.help.plist
com.apple.helpui.plist (you may or may not have this one).
com.apple.helpviewer.plist
Next go to ~/Library/Caches and delete the folder......
com.apple.helpui
Log out and log in. If the problem is gone, empty the trash. If not, put everything back.
you can open MacHelp directly from .....
/Library/Documentation/Help and it works fine.
george

New hard drive, mac still does not work

Mac stopped working so took it to a mac store and they said its most likely the hard drive. Sent the hard drive back because it was still under warranty and they sent me a new one.
Installed new hard drive in the computer and when I turn it on I cant find the HD anywhere so that I can format it. The install disc is the only thing that shows up and when it asks where I want to have the disc installed there is nothing for me to click because the HD is not there.
Am I missing something or is the HD not the issue? Thanks

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit DU and return to the installer. Complete installing Snow Leopard.

Web Service Call with Basic Authentication does not work

If I try to use Basic Authentication in my Web Service Client with the automatically created methods
setUsername(inUserName)
setPassword(inPassword)
setAddress(inAddress)
the application does not make a call. Did I forget something?
Is it possible to use "Test Method" with Basic Authentication?
Thank you.

Thank you for your answer.
But: I already read this article. And it doesn't help me.
I use the following code:
            getMyServiceClient1().setUsername(inUserName);
            getMyServiceClient1().setPassword(inPassword);With this code I always get a java.lang.NullPointerException.
The methods setUsername and setPassword are definded as follows:
public void setUsername(String inUserName) {
        myStub._setProperty(Stub.USERNAME_PROPERTY, inUserName);
public void setPassword(String inPassword) {
        myStub._setProperty(Stub.PASSWORD_PROPERTY, inPassword);
}But if I look at the methods which are generated automatically by Sun Java Studio Creator I cannot find _setProperty.
I also found this thread in your forum:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=54773

Hyperlink to a specific page in .mac website does not work

I used iWeb '06 to create a website. Published it to .mac. Every thing is hunky dory. I have another domain name at godaddy forward you to my .mac site. When I send a hyperlink to the godaddy domain name for the website, the site opens just fine. When I send a hyperlink link to a specific page in the website, I get an error message from .mac that 'the user does not exist...' Any idea on how to fix it so I can send a link to a specific page in the website?

When I send a hyperlink link to a specific page in the website, I get an error message from .mac that 'the user does not exist...' Any idea on how to fix it so I can send a link to a specific page in the website?
Could you provide your url and the hyperlink? If you are using masking/cloaking at godaddy, there is no way to refer to a specific page except via the web.mac.com url.

My "Mac Help" on my Mac Mini does not work!

I have a Mac Mini, OS X 10.3.9. When I go into Mac Help, nothing happens when I try to ask questions, and I experience other problems when I try to go through Mac Help's library. And sometimes it works as if nothing was wrong. It's just plain sick. Is there any way to reinstall it? Not being able to use the Help at times is problematic to say the least.
-carpetcomber

359/2805
Hi carpetcomber,
Welcome to the Discussions!
When it happens, just try deleting its Caches folder, this should clean it:
(quit Help) and delete this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those three files:
Home/Library/Preferences/com.apple.help.plist
Home/Library/Preferences/com.apple.helpui.plist
Home/Library/Preferences/com.apple.helpviewer.plist
and the Caches again.
More info about Mac Help troubleshooting:
- (The X Lab) Troubleshooting Help Viewer.
HTH
Axl

MAC Authentication does not work

Similar Messages

Maybe you are looking for