MDX Parser: Error during allocate

Hi, I'm trying to create some WebI reports over BW Queries, but when I try to refresh the WebI document, it throws an error that more less says "timeout during allocate / CPIC-CALL: ThSAPCMRV", I know that Note 1032461 is related, but unfortunately I don't know where to find the librfc32.dll by itself on SAP Support portal, the path defined in such note is no longer valid.
I copied librfc32.dll from c:\windows\syswow64 to E:\usr\sap\<SID>\SYS\exe\uc\NTAMD64, and tried to run manually the mdxsvr with the line suggested on the note
mdxsvr -amdxparser -g <host> -x <gateway> -t
but get the error: This application has failed to start because LIBRFC32.DLL was not found
I seems to be a problem with the adequate version of librfc32.dll (version on system32 is 6405.5.318.6424, while the one on syswow64 is 7200.1.39.6461
The mdxpars.dll is version 7010.0.4300.27
I am also aware of note 1434994, where it describes a required update on the BW 7.20 SP, the current version of mdxpars.dll is 7010.0.4300.27
Any suggestions?

Hi,
I would suggest you open a case with support so that you can get the right DLL for your environment
ingo

Similar Messages

Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngA

Hi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

Connection Test MDX PARSER - Error

Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!

Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM

MDX Parser Error in Data Mining

Hello Colleagues,
I have created the Application Process Designer(APD) for ABC analysis. Here APD is saved and activated successfully. Now while executing, it fills the data to datatarget, but giving error "Error occurred in starting the PARSER.Error opening in RFC connection. Syntax error in MDX statement".
In help, it says go to SM59 and test the connection of MDX parser. Now there testing is failing, but What I need to do to correct the connection?
Regards

Hello,
please read the OSS note: 149809
Hope this helps
Michael

MDX Parser error

Hello,
While checking the MDX Parser connection in TR SM59, I get the following error...
Error occurred when starting the parser: Error opening an RFC connection.
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System response
Error opening an RFC connection.
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
===================================
The same TCP/IP connection (with similar properties in working in other BW system). But giving error in the system where I am trying to write some MDX statement (TR MDXTEST). It goes to debug mode as soon as MDX statement is executed in MDXTEST.
Regards
Pankaj

Your RFCDestination is not correct. Please check it in SM59.
The program specified there may not be on the app server. Have you verified this already?
cheers,

Slipstream Problem (Parse Error during installation)

Hello, well, I am posting because I have wasted about 40 hours of my time, and 2 spindles of CDs trying to get a working slipstreamed Windows CD.
Basically, what happens, is that I format the drive for NTFS, it does its thing, it reboots, I hold down alt/option, and then I select the "Windows" drive, and from there, the installation begins, then an error box pops up, notifying me about a parse error on line 0 of some sxs.dll or something.
Anyone got any idea? I am sick of slipstreaming the **** thing; I just want to play Fallout, and I am about to go waste my money and buy another Windows disc, but that is my last resort.

*"How can you be so sure that this issue is 'strictly windows related'?"*
Because based on your original post your issue is related to your creation of the slipstreamed disc...and that disc contains Windows.
Have you tried booting your PC with the slipstreamed disc? If it doesn't work there either, then yes...it's a Windows only issue, and not relevant to these forums.
*"expect that they will only be referenced to a better forum, where members are more intelligent and polite, and are able to answer questions."*
Wouldn't that be where you would want to go anyway, to resolved your question? I'd think so, so why complain? You don't seem to realize that this is first and foremost an Apple forum...Windows experts are likely few and far between on these forums.
Regardless, your ultimate goal would be to run Boot Camp to play your games, therefore it would probably make more sense to post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Error occurred when starting the parser: timeout during allocate / CPIC-CAL

hi....plz how to solve that error .actually iam loading direct update dso from apd i having the records 1000 in query to read and transfer to apd to direct update dso. its coming error when excuting .plzz solve the error rectification ..............

Hi Anitha,
There are some Notes and suggestions in the following link. Hope your problem will be resolved.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=erroroccurredwhenstartingtheparser%253Atimeoutduringallocate%252FCPIC-CAL+
Regards,
Suman

Date parsing error during GTC trusted reconn

Hi Experts,
I am doing GTC reconn from database using DBAT connector. I created a UDF of type text(25) which is mapped to trusted database date field with format 'MM/DD/YYYY'.
But i am getting following error in logs, still the users is getting reconned in OIM with the same UDF getting poplated correctly.
Pelase share your ideas...
+<Error> <XELLERATE.DATABASE> <BEA-000000> <Class/Method: tcDataSet/getDate encounter some problems: Cannot convert '04-JAN-12' to Date: Unparseable date: "04-JAN-12"+
com.thortech.xl.dataaccess.tcDataSetException: Cannot convert '04-JAN-12' to Date: Unparseable date: "04-JAN-12"
+     at com.thortech.xl.dataaccess.tcDataSet.getDate(tcDataSet.java:1718)+
+     at com.thortech.xl.dataobj.tcDataSet.setDate(tcDataSet.java:1090)+
+     at com.thortech.xl.dataaccess.tcDataSet.setDate(tcDataSet.java:3073)+
+     at com.thortech.xl.dataobj.tcUSR.setAttribute(tcUSR.java:3840)+
+     at com.thortech.xl.dataobj.tcUSR.populateDataSet(tcUSR.java:3812)+
+     at com.thortech.xl.dataobj.tcUSR.setData(tcUSR.java:3775)+
+     at oracle.iam.transUI.impl.handlers.user.UserAuditHandler.audit(UserAuditHandler.java:238)+
+     at oracle.iam.platform.kernel.impl.OrchProcessData.runAuditEvents(OrchProcessData.java:1191)+
+     at oracle.iam.platform.kernel.impl.OrchProcessData.access$600(OrchProcessData.java:84)+
+     at oracle.iam.platform.kernel.impl.OrchProcessData$8.processWithoutResult(OrchProcessData.java:721)+
+     at oracle.iam.platform.tx.OIMTransactionCallbackWithoutResult.process(OIMTransactionCallbackWithoutResult.java:10)+
+     at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:13)+
+     at oracle.iam.platform.tx.OIMTransactionCallback.doInTransaction(OIMTransactionCallback.java:6)+
+     at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)+
+     at oracle.iam.platform.tx.OIMTransactionManager.execute(OIMTransactionManager.java:22)+
+     at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:714)+
+     at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)+
+     at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:802)+
+     at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:550)+
+     at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:485)+
+     at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:403)+
+     at sun.reflect.GeneratedMethodAccessor3461.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)+
+     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)+
+     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)+
+     at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)+
+     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)+
+     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)+
+     at $Proxy313.orchestrate(Unknown Source)+
+     at oracle.iam.reconciliation.impl.UserHandler.handlePostProcessing(UserHandler.java:507)+
+     at oracle.iam.reconciliation.impl.UserHandler.bulkPostProcess(UserHandler.java:448)+
+     at oracle.iam.reconciliation.impl.BaseEntityTypeHandler.process(BaseEntityTypeHandler.java:59)+
+     at oracle.iam.reconciliation.impl.ActionEngine.processBatch(ActionEngine.java:118)+
+     at oracle.iam.reconciliation.impl.ActionEngine.execute(ActionEngine.java:91)+
+     at oracle.iam.reconciliation.impl.ActionTask.execute(ActionTask.java:73)+
+     at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:99)+
+     at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:69)+
+     at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)+
+     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)+
+     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)+
+     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)+
+     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)+
+     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)+
+     at $Proxy678.onMessage(Unknown Source)+
+     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:583)+
+     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:486)+
+     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:389)+
+     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)+
+     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)+
+     at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3822)+
+     at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)+
+     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)+
+     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)+
+     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+>+

In the
19.2.4.2 Step 2: Specify Parameter Values Page
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/devgtc.htm#autoId7
for Creating GTC Connector:-
There is one parameter:-
Source Date Format
Since your source is database AND trusted database date field with format 'MM/DD/YYYY'.
So, update your GTC... provide:- MM/DD/YYYY
If this does not work, provide DD-MMM-YYYY

ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
naresh

hi,
i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic. Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
when i checked in frame, error log: system says:
Error: ODBO error
Details: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
ours is bi7 system. issue not resolved ..pls suggest me steps to resolve this.
thanks,.

Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)

Hi,
We have BO XI 4 running on BI 7.0 running on same 64 bit windows server. We intergrated with BI and tried creating the Web Intelligence reports on top of a universe sitting on cube. The Web Intelligence produces results/report when we used one dimension.
When we use more than one dimension, we get the following error.
Database error: The MDX query SELECT { } ON COLUMNS , CROSSJOIN( [0D0CUMENT].[LEVEL01].MEMBERS, [0MATERIAL].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [$Z02_C01] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)
Can someone please help with this?
Thanks,
Briston

Hi,
I tried placing the librfc32.dll in the usr\sap\BI7\SYS\exe\uc\NTAMD64 folder. Could it be that I might have used the wrong version of dll?
Thanks,
Briston

APD failure due to MDX Parser starting issue

Hello,
As part of BW on HANA migration, we have recently migrated Dev system to HANA database and during testing we have issue for one of the APD's
which when triggered failed with the below error messages: Error occurred when starting the parser:timeout during allocate / CPIC- CALL: 'ThSAPCMRCV' Syntax error in MDX statement Termination: Error when executing the query Processing was canceled And the RFC connection for MDX PARSER was also failing. Subsequently, basis implemented the SAP Note 1032461 - MDX parser does not start. Which resolved the issue with the RFC connection. However, the APD is still failing. The error message we get is as below for the same: Error occurred when starting the parser: Function RRTS_PARSE_MDX is not available Syntax error in MDX statement Termination: Error when executing the query Processing was canceled. Request your help on the same.
Most of the SDN forums on this topic advised on the SAP Note 1032461. However, despite implementing the same note our basis team couldn't succeed in resolving the issue. Thank you!

Hi Meduru Avinash,
As you rightly told, most of the time note 1032461 is referred to solve this issue.
Some where I have read that we need to refer 638701 also,
like adding gw/cpic_timeout in your system, if it is not available.
BR
Prabhith

MDX Parser

hello all,
can anyone tell me what is MDX parser?
through sm59 MDX parser can be configured but i have no authorization of sm59.
i am facing this error while executing the APD.
Please suggest as i am facing this issue from long time with no solution.
Thanks,
Kumkum

hi,
can you please elaborate about MDXTEST tcode.
if i drag and drop the inobject used in the query in the right panel of MDX test editor then it shows the same error as it shows while executing the APD i.e.
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
Thanks,
Kumkum
Edited by: kumkum basu on Jun 17, 2010 11:01 AM

Using RS with SAP Netweaver - Timeout during allocate /CPIC 'ThSAPCMRCV'

Hi All,
I am trying to connect to a remote SAP BI server from my local SQL server 2005 Reporting Services. I was able to view all info objects in the query builder but when I try to drill down and view members / drag and drop to create a query / preview the RS report, I get the following error ,
u201CError occurred retrieving child nodes - error occurred when starting the parser - timeout during allocate: /CPIC-CALL 'ThSAPCMRCV' u201D.
I have SAP front end and business explorer installed on my system. We also have the latest patches on SAP BI server.
I tried changing the timeout value but dint help.
Any help is appreciated.
Many Thanks,
Chitra

Hi
I think you should post this in basis and security forum.
Cheers
Chanda

Parser Error In Portlet Startup

We have a portlet application that uses Crystal Reports. It uses the spring framework and runs fine in our development environment (Pluto) but when trying to deploy on the production environment (WebSphere) we get an xml parsing error during the startup. Removing the Crystal Reports jars solves the problem but of course the reports portion of the application won't work. So is there a different set of jars for portal and specifically WebSphere? Or is there xml related functionality in the CR jars and would eliminating them from the lib solve the problem since there may be framework jars that provide the same functionality in the production environment?
Here's a snippet of the error:
Unexpected exception parsing XML document from ServletContext resource [/WEB-INF/sys-cfg/applicationContext.xml]; nested exception is java.lang.VerifyError: javax/xml/parsers/DocumentBuilder.setEntityResolver(Lorg/xml/sax/EntityResolver;)

The only officially tested and fully supported product for Crystal Reports on Portal Servers/Portlets are the JSR-168 Portal Integration Kits supplied with BusinessObjects Enterprise or Crystal Reports Servers.
There's currently not a fully tested Portal solution for Crystal Reports Java Reporting Component.
There's no different sets of jars for different Web Application Servers with any Business Objects products.
Are you able to isolate which XML file contains the problematic schema? I'm assuming the error message you have does not show this info.
Other than that, a possible difference is that different XML parsers are being used between your dev and prod web app servers. I've known issues where the XML parser supplied with Crystal was incompatible with the shared default parser supplied with Web App Servers.
Sincerely,
Ted Ueda

MDX Parser RFC is not working

Hi,
I am getting the following error when I test connect the MDX Parser RFC destination.
Logon -> Cancel
Error Details -> connecton closed (no data)
I have upgraded the latest mdxsvr.exe and mdxpars.dll in the kernel directory and also got the librfc32.dll in the kernel. I got updated librfc32.dll in the registry also. I checked various SAP notes, but none helped.
The main problem was when starting MDX parser:
===============================
Error occurred when starting the parser: connection closed (no data)
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
connection closed (no data)
=================================
Pls give any inputs on this.
Thanks,
Abdul

this could be because the RFC destination host is not maintained in the hosts file on the application servers... check that you can reach the host and see if that fix your issue.
Regards
Juan

MDX Parser: Error during allocate

Similar Messages

Maybe you are looking for