My apple tv just automatically updated now I get a screen with the back of the unit, what do I next
My apple TV automatically updated and now that the update is done, I get a screen with the back of the Apple TV showing a plug coming out of the HDMI spot pointing toward a music sign. How do I get the menu screen back?
The update didn't apply correctly. You need to grab a micro usb cable and connect to iTunes for restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
Similar Messages
-
Just did the most recent update, now I get no notifications with messages
Just updated to ios 7.1.1. now when I get text notifications in messages, I get no notifications, no sounds etc. Have checked all the settings and they are correct.
If I want to go back one update, whats the best way to do it with out loosing my info etc?It's too late now, if you want to use the iPhone, you need to restore.
It's very Important to backup iif you have important stuff you want to keep, do it more often, especially a IOS updates.
Message was edited by: ckuan -
My Adobe was just automatically updated and now I can't find many of the documents I had saved on my note 3 . What is going on?
Hi,
Your local files are not deleted by Acrobat DC.
Please take a look at the following document to find the local files on your Android device.
How to open PDFs on Adobe Acrobat DC on Android
Sorry for the inconvenience. -
I connected my iphone 4 to itunes and it automatically updated, now I am connected to icloud and all my pics are gone. Also, I have all my sons contacts on my phohe. How do I get my content back to the prior state?
Hey kaylactm,
Thanks for the question. I understand how frustrating this may be. To resolve your issue, it may be necessary to restore your device in recovery-mode:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.
found a solution in a different discussion.. thank god.
-
I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.
Connect your phone to itunes on the computer you use itunes on and open up itunes.
-
Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend
I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room. -
i have recently changed my Apple ID password, but i now cant access my icloud with the new password, i thought the 2 were linked?
Hi helenbeach,
If you've recently made changes to your Apple ID, you may need to update or log out/log back in to some of the related services for those changes to take effect. You may find the following article helpful:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Regards,
- Brenden -
I bought an iPhone 4 from a youngster who had put his own Apple ID on it but could not remember the password. I backed it up yesterday and restored to my new iPhone and it copied the Apple ID across too. Now I have 2 phones with it on. Anything I do?
that must be really annoying !!
so this is what you call
FIND MY IPHONE ACTIVATION LOCK Find My iPhone Activation Lock - Apple Support
when you start using iCloud on any iOS device and enable find my iPhone, this prevents a new user from using it, and also prevents anyone from using the phone
as it is locked to previous owners account ,this is also the case if when a phone is lost or stolen.
the only way around this is to have the previous owner reset their apple id by going to @ applied.apple.com
if they are unable to do this, then the only other way around this is to have the previous owner get a copy of their original receipt and call apple support who can then lift this lock if they get a copy of the receipt
unfortunately there is no quick fix -> the below link explains what you should do before you sell or give away an iPhone
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support -
I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Has anyone ever had an email from Apple on IPad asking them to update their account details? The email seems genuine enough as it asks you to sign in with your Apple ID and password and takes you through to the Apple site but am a bit worried as they ask you in the section Update Your Apple account for bank and credit card details and for the security number on the back of the card. Also in the section where it asks for my mobile number it will only take 10 numbers and when ai try to put in the final (11th number) it won't let me. Sorry am new to all this and a bit confused! Any help is gratefully appreciated.....Thanks.
That is phishing attack
Someone, other then Apple, sent it to you
Read http://support.apple.com/kb/ht4933
Allan -
My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.
pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
i started to restore my ipod and i unplugged it and it is now frozen at a screen with the apple logo and an empty loading bar
Try:
iPhone and iPod touch: Frozen and unresponsive
Maybe you are looking for
-
I am wondering what tools were used in the "Body Evolution" video
Hi, I am wondering what the names of the tools that were used in the "Body Evolution" video? I know somw of them, but I don't know what tools they used for the eyes, nose and to stretch the legs. Thank you!
-
Zen Touch doesn't work with Napst
I just got a Zen Touch, thinking that it works with Napster files. AM I mistaken? When I try to transfer Napster files I get a "license missing" error. (I am a current Napster subscriber). Help!
-
Treo800w does not use the ringer volume I have set
I have my 'Phone: Known Caller' ringer setting set to the standard Treo ring tone that came preinstalled on the Treo800w. I have the 'Ring type' set to Ring but NO matter how high or low I set the ringer volume it only rings at the lowest volume sett
-
Placing null values in the database
Hi I'm using a PreparedStatement object to try to input a null value in the database. I'm using the following code : pstmt = connection.prepareStatement("INSERT INTO Conditions (Deal,ConditionDate,Condition ) VALUES (?,?,?)"); pstmt.setString(1,"aDea
-
Blackberry Outlook Calendar Sync Issue
We recently discovered a outlook calendar sync issue we can add items on the Blackberry and they will show up in Exchange. But you can't change a calendar item from the Blackberry, e.g. if you create an item on the phone it will show up in Outlook, b