No Acc. Doc generated after Post Good Issue - please help!

Hi All,
I have problem when I try to post good issue, the accounting doc doesn't generated.
I have created SO, (Order type - OR, item category - TAB, Schedule Line cat - CB), created PO after the purchase requisition was generated in the SO. processed good receipt and created outbound delivery, everything is fine until post good issue, there is no Acc. Doc created automatically after PGI.
I have check the following setting
material type attribute setting - ok (standard price control, val.update, qty update)
valuation level - ok (valuation area is plant)
valuation grouping code - ok (activated)
valuation areas assigned to the valuation grouping code - ok
valuation class(s) is linked to material type(s) vis acc. cat. ref. - ok
accout grouping for movement type - ok (leave it as default)
configure auto posting - ok (I have run the simulation test, and created the missing G/L acc in the company code which under testing)
The WL Acc Doc type is defined and assigned with number range.
material and accounting period are open
In Purchase order, the purchase item assigned with Acc Assignment Category E, Special Stock is E, Consumption Posting set in Acc Assignment Category is E, Acc Modification is VAY, GR non-valuated and GR non-val. binding checkboxes are deselected.
I know the Acc Assignment Cate will affect the auto acc posting in GR, but I am not sure it will affect PGI in the same way.
Could anyone tell me which value string will be using for this auto acc posting for PGI? My best guess is
MvT S val. update, qty update Mvt Cns
601 E YES YES L ?
Could anyone tell me what cause the Acc Doc not be generated after PGI?
Thanks for your time
Alvin

thanks for reply.
Regard to the point 2 suggested by Cathy, the account determination for billing is set, the accouting doc is created after billing.
my problem is no acc. doc generated after PGI.
meanwhile I have searched a similar problem in other forums, I found some similar reply as Prasanth did, so I think I may try to run VA88 to see the result.
Prasanth, could you please explain the pinciple behind of why this happen if what you say is correct.
Thanks for your time!!!
Alvin

Similar Messages

  • Accounting Document not generated after Post goods issue in delivery order.

    Dear Experts
    Greeting of the daays,
    Need your help on below issue.
    After making the post goods issue ,the system is not making the accounting document.
    The error given by the system is as follows:
    Material document 12365 does not include an accounting document
    Diagnosis
    The system cannot find an accounting document for the material document 12365.
    Possible reasons for this are:
    The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    __Solution what I tried to solve this issue ,but not successful.__
    __Solution 1- maintain OMS2__
    __Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
    __Solution 3 - price maintain is material master.__
    __Solution 4 - OBYC - BSX - 7920 - GLA/c  and GBB- VAX and VAY - 7920 GLA/c.__
    __Pls let me know if there is any confirgation is missing.__

    Hi
    Do this checks:
    In tcode OBYC check if you have the proper entries.
    Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
    To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
    I hope this helps you
    Regards
    Eduardo

  • COPA document not generated when Post Goods Issue is reversed.

    Hello Friends,
    WE uses Stock Transport Order in two steps for transfering Stock from one plant to another.  We have defined a Condition type FRB1 to capture the Freight cost involved in the stock transfer.
    When the Post goods issue is done for the Stock Transport Order. following Accounting documents are generated.
    Accounting
    Profit Center
    COPA
    Spec. Purpose Ledger
    Controlling Document
    Material Ledger document.
    But When the Post goods issue is reversed through transaction code VL09 all the above documents are generated except for COPA document. Though in controlling document it shows the object type hit is REO i.e profitability Analysis
    For further information we have mapped cost element (600150) with Value field in PA transfer structure (Direct assignment from FI and MM. Movement type used for PGI are 641 & 642.
    Thank you

    Dear Colleagues
    I thank all those who put in thier time and efforts for possible solution for my problem. But I could resolve this issue with help from SAP.
    Basically in costing based COPA the system does not post the cost of goods sold to COPA during goods issue but it is done at the time of posting the invoice since the system wants to see the revenues and the COGS values together.
    Since the system posts the COGS into COPA at the time of invoice posting, you will appreciate that if this is also done during goods
    issue then you will have duplicate entries in your COPA (i.e. the COGS will be doubled).
    If in transaction VL01N/VL02N a costing-based line item would be posted, the costs would be double in CO-PA (the billing and goods issue). For this reason, no costing based line items will be created in the standard R/3 system for transaction VL01N/VL02N.
    If for some reason you still wish to post the COGS to COPA during goods issue you have to do the same thro a modification of the system.In your case you have applied note 214381 for the same. Please note here that movement type '641' is used as an example. For other movement types you will need to code accordingly.
    as per note 337488 point 2. the changes of note 214381 were not required in our case. Therefore we reverted these changes in LKEIIF01 and added the relevant coding for movement type 642 in function COPA_DOCUMENT_CHECK as per note 337488 point 2.
    Looking forward for your continued support
    Regards
    Umesh Gothankar

  • Accepted change after post goods issue

    when i made delivery and post goods issue in sap then if any body change the quantity of order in va02 the system accept ?
    how can i change this

    Hi,
    yes..it will accept...but it will show a warning message as per standard.
    Example: " Delivery of 1 EA has already been made for item 10" message no V4096
    if you want to show as an error message try to change the category " W" to "E" in OVAH
    so that it will not allow you to change the order quantity.
    Note: Order quantity will be grayed out after creation of Billing only.
    Hope it helps.
    Thanks,
    Krishna.

  • After Effects installation issues Please help!!!!!!!!!!!

    I am trying to intstall AfterEffects CS5 on my computer and I keep getting an error message that the program will only work on 64-bit system.
    I have a windows 7, 32-bit system. My question is will another version of Aftereffects work on my computer?  For example will Aftereffects CS4 work?
    Please I need help in figuring this out.

    Hello,
    Would you mind reposting this over on the After Effects forum?  You've posted on the AIR installation forum and I have a feeling you'll get better expertise over there.
    Thanks,
    Chris

  • Disable Customer-Material Number field during VL02n before post goods issue

    Hello SAP gurus,
    I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
    As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
    Will it be possible to disable the field without having to post goods issue first?
    Thanks in advance.
    Jayson

    I think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.

  • Data base tables for delivery & post goods issue

    Hi,
      can u plz tell me which database tables are going to update after the delivery is completed?
    which database tables are going to update after post goods issue.
    Thanks for ur help.
    Regards
    pabitra

    Hi,
    Check the folowing tables:
    LIKP : Delivery header
    LIPS : Delivery items
    VTTP : Shipment item
    VTTK : Shipment header
    VBFA : Document flow
    VBUK : Header status
    VBUP : Item status
    Regards,
    Santhosh

  • Generate DELVRY  Idoc when Post goods issue is done in SAP

    I need to generate an Idoc when post goods issue is done in SAP (outbound to SAP) .I understood that I can do this using the message control .The message type DESADV with the process code DELV will support this.
    But I didn’t understand how to trigger the Idoc.In the current scenario our Company is doing the post goods issue in SAP for the in three different ways.
    1.Manually doing the post goods issue through the transaction VL02N
    2. an Inbound Interface (using Idoc)  which will do Post goods Issue in SAP
    3.Another Interface using BAPI, which will, do post goods issue in SAP
    I have to run my outbound interface when the post goods issue is done by all the above three ways.  Can any one help me out in this?

    You have to configure the output first .
    You can use output type LAVA ( avaialble in Std SAP ) .
    ( Tcode is NACE , Select Application V2 -> Outputtypes ).
    ( Create condition records suitable to generate an output)
    Next is ALE.
    Setup a distribution Model ( for DESADV ) and all other setup for ALE i.e. Distribute Dist. Model / Generate Partner Profile .
    In the Partner profile in WE20 select your partner system. Double CLick on Outbound Message DESADV ( this wd be there after you generate partner profile , if not add it here in outbound ) . On this screen goto tab MESSAGE CONTROL .
    Application - V2
    Message Type - LAVA
    Process Code - DELV.
    Now you are ready to go. The moment a PGI is done in any form an output LAVA would be proposed and processed using process code DELV.
    Cheers.

  • Billing doc while post goods issue

    Hi,
    Is there any Exit to creat a billing doc immediately when we post goods issue.
    Please, if there any other solution. don't hesitate.
    Thanks.

    You can use message condition record in outbound delivery ,as soon as you do PGI ,this message condition will trigger & it will create Billing document Back ground.Take ABAPer help he will guide you.

  • Post Goods issue after clicking on Load Starting push button

    Hi All,
    Post goods issue for deliveries, suppose if the shipment document is created for XXXX country do the post goods issue after clicking the push button loading start on. and if the shipment is created other than the XXXX Country do the post goods issue after clicking the shipment start button(Done by Standard SAP).
    There will be validation table in background to identify which shipping point to allow Post Goods Issue before shipment completion. This will require enhancement of Delivery User Exit to incorporate above check based on below mentioned Z Table.
    Z-Table
    - Shipping Point.
    - Delivery Type
    Any body please suggest the user exit or any function module and how to start code for this particular requirement.
    Thanks & Regards,
    Narasimha

    Hi,
    You can write your own vaalidation on click of loading start button.
    Go to include MV56AI_IS_ENHANCEMENT of program SAPMV56A.
    Click on the circular button(Enhance).
    Then Edit --> Enhancement Operation --> Create.
    Create your enhancement giving it a Z name.
    Then in this enhancement you can write your code.
    For loading start you can write your code in the following fashion.
    IF fcode = 'MM_ST03'.
          business logic.....
    ENDIF.
    Regards,
    Firoz.

  • Exception in CRM system after creating post goods issue in ECC

    Hi Folks,
    We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
    We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
    Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
    We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
    Best Regards,
    Dharmakasi.

    Hi,
    I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
    1. Why system is not updating the table with all the action definitions available in action profile
    2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
    I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
    Best Regards,
    Dharmakasi.

  • User exit to triger after PGI (Post Goods Issue)..

    Hi,
    Can any one help me on this........... Plz .. Urjent...
    I want to make some operation after PGI and I want to find out the user exit to triger after PGI... I dont know How to find out that exact .. Can any one help me on this ...
    I want the User exit that triger after PGI...
    Regards,
    Raghunath.S

    Hello Sudha,
    Once the PGI ( Post Goods Issues ) over then I want to do some operation .. for that I want to find out the user exit where I can write some logic and process after the PGI...
    Can you help me on this Plzzzzzzzzzzzzz....

  • Goods picking and Post goods issue in VL02N

    Dear All,
    Am hving problem in Picking goods and Post goods issue.
    This is for the Stock Transport Order with Delivery via Shipping
    Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
    Sales org:1000
    Distrbn Chnnl:10
    Division:00
    1.maintained matrial for both the plants.
    2.Creted STO by using DOC type as "UB" and item cat "U".
    3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
    saved the Po.
    4.After that i done the GR w/o PO for the material using Mvt type 501.
    5.Then,VL10B creating Delivery doc.n this is also created.
    6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
    <b>Item to be picked by WM (picking quantity cannot be entered)
    Message no. VL118
    Diagnosis
    For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
    System Response
    The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
    is any data missed by me while doing this process?
    pls let me know n help me in this regrds
    Thank you all

    Hi Vijay
    By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
    For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
    warm regards
    sairam akundi

  • Post goods Issue ,in VL02n

    Hi friends ,
    I am trying to post Goods issue from delivery order,through VL02n .I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 645'.
    I saw in some of the threads about this BAPI ,BAPI_OUTB_DELIVERY_CONFIRM_DEC .Can i achive the same functionality .Please suggest me which parameters should be passed into the BAPI.
    The BAPI should return me the material document number generated from VL02n ,i mean after posting the goods issue .
    Regards ,
    Hemanth Nugur .

    Hi
    "I am trying to post Goods issue from delivery order,through VL02n"
    If you want to do it inside VL02N transaction, you already a PGI button, just click on that, PGI will be done
    Regards
    MD

  • Post goods issue

    hi
    if a order is created for a material 'X' for quantity=50.while delivering the order in VL01N if the delivering and picking qty is given 40 and a post goods issue is done after that in VL02N if we change the delivering and picking qty to 50 and do the post goods issue  thn
    1-the accounting document will be generated for qty 40 and thn an addition of 10 so the total of 50 or 40+50=90 qty.
    2- how does it affect the accounting document.
    Plz help..

    Hi Suresh,
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    Please check this earlier thread in SDN:
    Re: BAPI to post a Goods issue with relation to Sales Order?
    Lanka

Maybe you are looking for