One Armed Config for multiple C classes

Hi,
I am trying to implement one armed config in the existing network for several c classes.  Do I need to configure multiple Circuit vlan IP addresses corresponding to different C classes or one Circuit VLAN IP is sufficient.
Can I configure VIP in a different C class than Circuit VLan IP.
I intend to use Source groups to get the traffic from servers back to CSS.
Many thanks in advance.
SS

Two options are all ok.
1. The CSS will allow you to create a secondary address on the circuit.
for example,
circuit VLAN2
ip address 148.1.2.1 255.255.255.0
ip address 148.1.3.1 255.255.255.0
2. You could also create another interface "circuit" on the CSS and assign it with  the new subnet IP. Then trunk the vlan to core network.
If you uses one arm mode, then you can use either source "groups" to get the traffic from servers back to CSS or PBR from switch.
You can configure VIP in a different C class than Circuit VLan IP. However, you need to control the routing tables of all other devices. Generally speaking, I would not recommend this setup to the customer.

Similar Messages

  • One Arm config Domain Name Content rule

    Hi Guys
    How does domain name content rule works in one arm config.
    What do we put in source groups as VIP address.
    Does it need host headers in WebServer as a requirement.
    How does the client request gets completed.
    Any help much appriciated..

    Thanks for your reply Jim,
    This is what I am trying to do in a One arm config topology
    ( As the CSS guide ( cntntgd.pdf ) says under Configuring a Domain Name content rule)
    The CSS allows you to use a domain name in place of, or in conjunction with, a
    VIP address in a content rule. Using a domain name in a content rule enables you
    to:
    Enable service provisioning to be independent of IP-to-domain namemappings
    Provision cache bandwidth as needed based on domain names
    So I am trying to create a content rule with a domain name instead of VIP address. For ex.
    content domainRule3
    protocol tcp
    port 80
    url "//domain.com/*"
    add service Serv1
    active
    group servers
    add destination service Serv1
    VIP address  ???????? ( what shd we put in here )
    In this case what do we put as VIP address in source groups and how does the traffic flows from Client to actual Server in One arm topology. I am trying this topology where we have multiple sites configured with the same IP address with host headers
    My assumption is that I shd configure DNS servers with VIP address for domain.com and use that as VIP address in source group. But how does the actual traffic flows from client to servers
    Many thanks.

  • CSS 11503 One armed config

    All,
    I got a question on the one armed config.
    Cisco says use "destination service" under the source group to change the default NAT behaviour of the CSS, because the servers' default gateways are set to the router IP address and the source IP address of the load balanced request is not on the local subnet. I understand this way you avoid the packets reaching the router directly when they head back to the client, bypassing the CSS.
    Now the question I got here is that, what if I set the Servers' default gateway to the CSS rather than the Router. This way you are actually forcing the packets destined for remote networks to go through the CSS DG.. Should I need the source group anyway here. I think I don?t. Someone please clarify. Much appreciated?
    thanks

    if you set the default gateway to be the CSS, then there is no need for the source group.
    However, if you have traffic going directly to the servers, they will go client-->router-->server-->CSS [breaks - because asymetric flow].
    If you never access the server directly, you're ok. OR you can set a route on the router forcing the traffic through the CSS.
    Gilles.

  • One-armed config

    We've done a one-armed setup in our production env using CSS11506(s) and have no issues. We're bring up a smaller setup using CSS 11150(s) and was wondering if they work just as well, performance wise, with a one-armed config?
    Thanks
    chad

    I think it should work just fine. The same configuration would work for CSS 11000 series switches.
    Check the config document:
    http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml

  • I have one apple ID for multiple devices in my family.  I'd like to keep it that way for itunes/app purchases.  I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

    I have one apple ID for multiple devices in my family.  I'd like to keep it that way for itunes/app purchases.  I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
    I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet.  My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses.  I have read that if each person gets their own iCloud account, this would work.  However, I need to know what to do after I set everyone up with their own iCloud account.  Do I make that the default email address to be contacted or can they still use their hotmail email addresses.  Any help- with easy explanation- would be much appreciated!!

    We do this in my family now.  We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores).  Each iDevice has this configured.
    Then, each of us has our own iCloud account that is configured under Settings/iCloud.  That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup.  That Backup piece is pretty sweet and comes in handly if you replace your iDevice.  You can just restore from it.
    So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
    In answer to what iCloud does for you: http://www.apple.com/icloud/features/
    Think of it as an internet based ("cloud") area for all of those items listed in my response.  What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures.  Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures.  1000 may not stretch as far as it sounds.
    Message was edited by: Michael Pardee

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • One search help for multiple select-options in webdynpro abap

    Hi,
    I need a way to use one search help for multiple select-options fields. My scenario is :
    I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
    If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
    If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
    I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
    I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
    However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
    I think I won't be able to use this way. What do you say?
    As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
    MY TABLE (ZBYYT080) CONTENTS:
    SID     VARBL     VALUE     LANGU     VTEXT
    ADS     $WERKS     1     T     Werk 0001
    ADS     $WERKS     11     T     OZYAS  GIDA URETIM YERI
    ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
    ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
    AGT     $WERKS     2301     T     KAMLI DAMIZLIK
    AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
    ADS     $VKORG     22     T     AA KİMYASALLAR
    ADS     $VKORG     8001     T     İINSAAT BOYALARI
    AGT     $VKORG     6500     T     DAMk St.Org
    AGT     $VKORG     5400     T     PANAR St.Org.
    I wish I'm clear enough..
    I will be gald if someone answers me as soon as possible...
    Thanks İn advance..
    MERAL

    Hi,
    Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
    Am I right ?
    If Yes, then in the interface IF_WD_SELECT_OPTIONS
    method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
    have importing param like I_VALUE_HELP_TYPE and  I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
    etc which may help you to link your create DDIC Search help to selection screen params.
    this is just a clue from my side. I haven't tried it myself.
    You can go to the where used list of this method and find some sample implementations which use these params.
    Hope this helps.
    Regards
    Manas Dua

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • How to create one inbound delivery for multiple purchase order?

    Hi Experts,
    Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)? 
    Is there a configuration needed for this?  If yes, please let me know the configuration to make this happen.
    Appreciate your help on this.  Right answers will be rewarded.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • One inspection lot for multiple materials of purchase order line items

    Hi All,
    My client requirement is one inspection lot for multiple materials of purchase order line items.
    Please share your thoughts.
    Thanks in advance for early reply.
    Regards,
    Jishu

    I totally agree with Amol.
    I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
    Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality.  I think you'd have to create all your own Z tables and basically rebuild the functionality.  Tying it back in with SAP data will be difficult.
    You're even looking at all custom screens for your results recording and UD as well.  And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
    Craig

  • One skype number for multiple users in Skype Manag...

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
    If so, how do I go about it?
    I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
    Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
    http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
    7.5 Online Numbers for incoming calls
    You can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time.
    7.5.1 Adding an Online Number to your SIP Profile
    Shows you how to setup such
    Thanks,
    Kent C.

  • One billing document for multiple deliveries which are for different PO

    Hi All,
    I have a scenario where i need to create one billing document for multiple deliveries.
    Payer is same
    Ship-to is same
    PGI date different
    Sales area is one
    PO different
    In standard SAP it will create seperate billing document for different PO
    Please advice if there is a different copy routine which will combine all the POs in one billing document.

    Hi Mr. Bhat,
    Go to VTFL --> Select the combination of your delivery type and billing type --> Double click at Item(Left side) --> Select your item category --> Click at details
    In the feild "Data VBRK/VBRP" --> I think the routine assigned is 601 (Inv.split - PO Num.) --> Now change it to 3 (Single invoice)
    Then try your process, Hope it helps.
    Regards,
    MT

  • One Billing document for multiple Dilevery Documents

    Dear All,
             I m trying to generate one billing documents for multiple dilveries documents with Tcode : VF04. But it is generating billing documents for all the delivery documents.  M i missing any configuration or some thing like that.
    Suggestions?
    Regards,
    Vikas

    Hi Vikas,
    after you created the billing document there is one menu option protocol. If have it not 100% in mind and i am note able to test it for the moment.
    T

  • One skype number for multiple users in Skype Manager

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

  • How Can I Create One Entry Sheet For Multiple Line Items of A PO

    Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

    hi,
    It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
    you have to make different service entry sheets for different item of service master.
    regards
    Manish Joshi

Maybe you are looking for