Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

Similar Messages

My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
In Mail, choose File/Import Mailboxes....
Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
Problem solved - for me anyway!!
Hope this helps.

CRM 4.0 and BI 7.0 - CRM Workbooks are blank after upgrade to BI 7.0

We have upgraded to BI 7.0 SP13. When executing CRM reports they return no data. It appears that the variants are not being passed correctly to BW to extract the data. We have run all of the required programs to convert variants after upgrade.
This is very urgent. Any suggestions would be greatly appreciated.
Thank you,
Teri
Message was edited by:
teri chandler

Hello Shivani,
please do not request documentation via E-Mail. Try to share it i.e. in the SDN Wiki.
Regards
Gregor

Desktop Icons are blank after upgrade

Has anyone else noticed that in lion your alias links sometimes show as clear squares? Mine has almost daily. If you click on them and move them the blue folder is back.. Its bother some but not an issue. If you have seen this can it be fixed?
MBP15-Early 2011.

Same thing happening here on my mid-2010 MacBook Pro 15. I don't recall this being a problem at all in Snow Leopard. Hope the 10.7.2 update fixes the problem.

Is statspack and awr report are same?

Hi
All,
Is statspack and awr report are same? and in which oracle version they are?
Thanks,
Vishal

I wouldn't expect AWR or statspack to be able to generate snapshots or to run reports while the database is in restricted mode. I've never tested it, but I wouldn't expect it to work.
Restricted mode is not normally used to allow normal users to test a database. Normally, if you're upgrading a production database, you have already validated that the upgrade works correctly by upgrading and testing the dev, test, and potentially staging databases. So when it comes to upgrading prod, you do the upgrade, verify that the upgrade scripts didn't throw any errors, and open up the database for users to do some quick validation. If there is some fear that users logging in would "mess up the database", that implies that you don't have enough confidence in the upgrade to even think about upgrading prod.
Occasionally, you'll have a standby database that gets upgraded and opened up and a select number of users given information on how to connect to the new database. Those users would verify the new database and then some sort of switchover would take place to move everyone from the old system to the new one. That generally requires a lot more work, though, because you have to replicate data during the parallel production phase.
Justin

System and sysdba accounts are locked

Hi
System and sysdba accounts are locked I cannot connect
is there a solution for it??

no one answered but I could solve it using the user sys.

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Quit the app and restart the iPad.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try the videos app again.

SAP and XL Reporter are both compatible with Microsoft Office 2007.??????

Please confirm that SAP and XL Reporter are both compatible with Microsoft Office 2007.

Darpal,
SAP Business one supports Microsoft office starting with 2005 A patch 15 and up. You can see the specifics on supported platforms at this link
[https://service.sap.com/smb/sbo/platforms]
Regards,
Lucas

Report is Blank after Click on Save button

Hi All,
I am having a Real Time Infocube, which is been used by Monthly and Yearly report separately using different Aggregation Levels.
During Monthly report testing, I made changes in Yearly Report (common for monthly as well) and clicked on SAVE button.
As a result, a new request generated into the Cube, whereas my old request (yellow one) was still there and was containing only 700 records.
Step1:
Now, after that when I activated aggregation level. The output of the report was blank.
Same thing happened with monthly report also.
Step2:
So, I deleted that new request from Cube after changing its behaviour from Planned mode --> Load mode.
Now, when I tried to get it back. It was asking me to green the existing request (old request).
Step3:
when the cube was containing only old yellow request (before changing the behaviour) monthly report was showing me correct data. But, Yearly report was blank.
So, I manually green the request and changed the behaviour to Planned mode.
Whereas, Now (after changing behavior to Planned mode) both reports are blank.
Please help!!
Best Regards,
Jatin

Hi,
first you the correct settings in transaction RSDIPROP for your InfoCube:
On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
- if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
- if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
- if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
Now check the values of your query again.
Note 1136163 contains the recommended cache settings in RSRT.
Regards,
Gregor

HT1338 I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis.

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password. They should be different correct?

I am trying to deauthorize my audible account. It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password and logging in to post this. They should be the same password correct?

Deauthorize Audible Account... always appears as a menu selection, even if you deauthorized Audible or never even had an account.
Audible is a different account from iTunes and does not require the same username / password.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

How come calendars and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

How come calandras and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

Hi, Did you work out a fix for this? All my calender dates (past & future) and the last 12 months of new contacts gone!!!! And yes i too back up regularly.
Previously when the great 5 upgrade happened, i did loss everything, and although I was doing backups none of that info was relative in an English way. A whole life of important, unreplaceable information gone! Never to be found.
All of my products are apple, but it seems that little people dont matter to them, with no recourse for the damage to my personal or professional life.
Extremly disappointed again!

Camera iphone 4 cdma blank after upgrade to ios 7.1

camera iphone 4 cdma blank after upgrade to ios 7.1, before update to ios 7.1 all camera working good (front and rear) but after upgrade my rear camera still black screen but front camera was fine.
help me plis

Hello, hidrahmat.
Thank you for visiting Apple Support Communities.
This article will help your troubleshoot the camera issue with your iPhone. See the section labeled Camera isn't functioning or has undesired image quality.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the issue persists, see the last section labeled Issue not resolved.
Cheers,
Jason H.

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Similar Messages

Maybe you are looking for