Please Read This if You Need Help Setting Up Email...

Hi Everyone!
If you are hoping to use your Nokia phone for send and receiving emails you will need to set this up prior to use.
You may find that your phone has already been setup to send and receive emails by your network. This will be for the email address that has been provided to you by your network. If you would like to set up your phone for another email account, like your private or work email account, this will need to be set up by you.
The easiest way to do this is to order the settings from our site. You can do this from this link: Nokia Settings Page Here you can order all the settings you might need, to get your email settings click on Order Advance Settings and choose email when prompted.
Dont worry if you can't see your email provider in that list, if you have Nokia PC Suite installed you can connect your phone to your PC and configure your email account with some software.
If you have a 9500, 9300 or 9300i communicator you can go here: Nokia Configuartion Tool
If you have 3220, 6230i, 8800, 6810, 6820 or 6822 you can go here: Nokia Email Configuration Tool
If you have a series 60 phone like a 6680 or 7610 etc you can install the Settings Wizard from here: Nokia Settings Wizard. This application will attempt to configure your email settings for you. You will need a working installation of PC Suite to install this from your PC. If you are able to get the installation file on to your phone you will be able to install from there.
If your phone has not been listed in any of the above points, then unfortunately you will need to configure the phone manually. If you need to do this you will have to find out some basic information first:
Your incoming server address
Your outgoing server address
Do you require a secure incoming/outgoing connection?
Do you need SSL?
Your email provider will be able to provide all this information, if you get stuck during the setup on what you should be entering for a setting, your email provider will be able to help you out.
Hope this is enough to help some of you out, any comments are welcome - just send me a PM.
Cheers
Karim
EDIT: Updated link to the phonesettings pageMessage Edited by ajak on 20-Aug-2007 04:27 PM

Road Runner is a pain at times to get to work on both Wi-Fi and EDGE. It seems as if their outgoing mail server doesn't like to roam. CWMX is ONLY for use on the cellular network, and if you plan on using Wi-Fi to send e-mails periodically, CWMX will NOT work.
My solution: Sign up for a GMAIL account, and forward your e-mails to the GMAIL account (provided POP access is enabled). Just log-in to this GMAIL account with your iPhone, and you'll get all your e-mails! If you need any help, let me know, I'll be glad to get you some directions.

Similar Messages

Question.! Please read this. I need help.

So I just got my Palm Pixi yesterday night. I was wondering if you can download 3rd party apps from your computer? If so what sites can I go to? and how do I put them onto my phone?

Hello and welcome to the forums;
We have a built-in App Catalog available on your device, but there are alternate app feeds (web distribution and Beta apps) available at websites such as projectappetite.com and precentral.net. When you find an app that you want, you are prompted for your phone number and an SMS message is sent to you with the link to the application. Once you tap the link from your device, you can install the app just like you would from the app catalog.
Hope this helps,
TreoAide

Please read this before you start a topic

Dear users of the SDN ITS forum!
Please provide the following basic information whenever you start a new topic thread to discuss your question/problem with other SDN users. By providing this information right from the beginning of your thread, you minimise the risk of any misunderstandings and other users can help you more quickly.
1) ITS Release
Please state which ITS release you are using! For the standalone ITS 6.20, please include the patchlevel version, SAP Note 550554 describes how to do this (earlier ITS releases are not supported anymore - please upgrade to the latest ITS releases first and check if your problem still exists). For the integrated ITS 6.40, please add the support package level and the kernel patch level of the SAP Web Application Server.
Until this information is provided, the community is unable to offer you proper help and you will very probably be asked for the information in the first reply.
2) Web browser
Please state which web browser(s) you use when the problem occurs. Please add the exact browser version and check if the problem also occurs in other web browsers. (Examples of browsers are: Internet Explorer 6, Mozilla 1.7.x, Firefox 1.0.x, Netscape 7.x)
3) R/3 Release
Thank you for helping other SDN users to help you!
As moderator of the forum, I may add other items/content to this posting later. The date in the subject line indicates when this topic was last updated. If you feel there is something missing or incorrect, please reply to this posting.
Thanks for reading!
Best regards,
Henning.

Welcome to the Internet Transaction Server Forum!
Please see our <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki">Wiki FAQ</a> and use the search before you post. More detailed <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>, can be found on the Wiki.
Happy posting!
The Community Team

READ THIS! I NEED HELP WITH MY IPAD! SAVE ME!

In the mail app, I have tried to insert my mail account from from orange.sn. I am living overseas in West Africa. I have a POP(3) account that works fine with Windows Mail, but after inserting everything properly in the Mail account setting on my iPad, it still will not work. I have done everything Apple's help guides, user booklets and everything else said to do, but it simply won't work. Is Orange compatiple with the iPad? What could be the problem? Please help, its my only email account and it getting really frustrating.
Here is the message that pops up: "Cannot Get Mail. The Mail server "mail.orange.sn" is not responding. Verify that you have entered the correct account info in Mail settings."
Message was edited by: Stacey Chappman

i googled orange senegal email setup and got the following. while it is written for a smartphone, any email set up instructions, such and the server names would probably be the same.
email - Orange Setup
email setup. With a compatible phone* you can send and receive email directly ... However if you have been an Orange customer for less than 12 months GPRS ...
setuporange.wdsglobal.com/email - Cached - Similar
so goto the link setuporange.wdsglobal.com/email and see if there is some help there.

CMSS can cause for weird results. Please read this if you have surround issues

I'm a musician who frequently uses the Audio creation mode because this is the environment most optimal for creating music. For some time now, I've facing a certain problem where today, I finally found the solution about.
my problem
The problem I was having, is that some applications (they're optimised for stereo) played sound on my center speaker differently than those who use the windows 7 drivers. What happened in a nutshell, is that when I play sound in flash, the center speaker volume is about 3 times as loud as all the other speakers. Although this gives a nice and clear sound for presentations, this can be a pain when you want to listen to music.
my setup
For me, this is a bit awkward, because I have a big room where my speakers are positioned for my TV. My computer is next to my tv, but my center speaker is not in front of my pc monitor, but rather in front of my tv. Due to this, the right ear gets way more sound than my left one. Strangely enough, it weren't all the applications that had trouble with this. My music player plays everything equally throughout my speakers.
the mixer
The creative mixer (startup console) has several ways of tweaking this. Like assigning what channels to play if sound gets played through L/R, and their individual volume bars. You can guess it maybe. Changing these settings affected both applications differently. I could use the sliders to fix one, and then mess up the other. So when I went through all my settings I couldn't find what causes this.
CMSS is the fault here
I went reading this forum, and came to this post: http://forums.creative.com/t5/Sound-Blaster/How-to-enable-sound-for-my-center-rear-and-side-speakers-using/td-p/52 What gives, this option is not available when you are in Audiocreation mode. So it shouldn't affect my sound right? WRONG!
the problem
Even though you can't tweak the settings during audio creation mode, the settings are still in affect. So you have to switch to entertainment mode to access the CMSS-3D. I went there, and I had stereo enhancing surround enabled. When I changed that, it solved my problem. Since during audio creation, I mainly use stereo applications, I do not need surround enhancement.
my setup now
I turned it off, and as suspected, windows only parses sound to the left and right, not the other channels, even in audio creation mode. In the mixer, I have enabled output to all 7 channels I have for L/R output, and now the sound gets balanced to all my speakers. True, I get stereo sound over all the speakers, but when I want to use surround, I switch to the entertainment mode anyway.
Could a mod sticky this? I think its worth to have this stickied.

So my touchpad wasn't working and I have an HP dv6-6135dx. It started being messed up shortly after I took my PC apart to upgrade the screen. Sometimes it worked perfectly, sometimes it was completely unresponsive, sometimes the ring around the touchpad was lit, other times it wasn't etc.... It got worse and worse to the point where the touch pad almost never worked.
I followed this guide, and it didn't fix the problem; however, this got me thinking, and I pulled the keyboard out and reseated the touchpad cable where it connects right under there. BAM works perfectly. THANK YOU so much for this post, for some reason I didn't think to reseat the cable... I must have not plugged it back in completely when I took my laptop apart. You can find the service manual for the dv6t here Its in the first post

There was an error opening this document. There was a problem reading this document (14). need help

i can open other files on adobe except one, and this is the message i get. "There was an error opening this document. There was a problem reading this document (14)." how can i fix this?

What is the version of your Adobe Reader? It sounds like you are using the desktop version of Adobe Reader.

Need help setting up email

I have a new Palm Cento...love it. Sync went well. Can't figure out email Called palm setup and they just kept reading from scripts, no go. My office is on a server and email comes through that. I use Outlook for email. Will this work / what do I need to do?
Post relates to: Centro (Sprint)

Who is your email through? There are a lot of preset servers in VeraMail. If you pick the one you have currently it will only need to ask for your username and password. If you are using one that is not in the list, you can go to that email services website and vew "Setting Up POP mail" and it will tell you what your settings are. Most likely it is something like POP.servername.com and SMTP.servername.com however you need to double check because some servers use different variations of that.
Post relates to: Centro (AT&T)

Read this if you need a security code (Sticky)

Hi Everyone!
I have seen a few posts asking "What is my security code?". So I thought I would make this post. Basically most Nokia phones all use the same security code by default, this is 12345. All phones are set with this code from the factory and will stay using 12345 until it is changed.
If you have changed your security code from 12345 then you would normally need to take your phone into a Nokia Service Point. Here an authorised engineer would reset the code back to its default of 12345. You can find your nearest Nokia Service Point on this page:
www.nokia.com/repair
Unfortunately there is nothing that can be done other than visit an engineer if you forget the security code , they will need to reset the code to the factory default for you.
Cheers
Karim
Message Edited by vandelay on 08-Oct-2008 02:02 PM

There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.Message Edited by michaels on 29-Nov-2007 10:02 PM
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Read this if you need a security code

Hi Everyone!
I have seen a few posts asking "What is my security code?". So I thought I would make this post. Basically most Nokia phones all use the same security code by default, this is 12345. All phones are set with this code from the factory and will stay using 12345 until it is changed.
If you have changed your security code from 12345 then you would normally need to take your phone into a Nokia Service Point. Here an authorised engineer would reset the code back to its default of 12345. You can find your nearest Nokia Service Point on this page:
www.nokia.com/repair
Unfortunately there is nothing that can be done other than visit an engineer if you forget the security code , they will need to reset the code to the factory default for you.
Cheers
Karim
There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.
michaels
Come on micheals There is no need to be an engineer to do that! For Nokia 301 Press "Menu" button. Then select "Settings". Scroll until "Security" and press on it. Finally select "Access codes".
Now select "Change secur. code". Answer "Yes" and you can change your default security code (12345) with another one (mine is 54321 ...)
Hope it helps.
Frank from Rome

There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.Message Edited by michaels on 29-Nov-2007 10:02 PM
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

OMG CAN SOMEONE PLEASE ANSWER THIS I REALLY NEED HELP!! MY ITUNES WONT OPEN

i had to download itunes again because i restarted my computer and deleted itunes from it and i downloaded the new itunes and everything was goin good and it got intalled and the quicktime and itunes icons appeared on my desktop...but when i clicked on the icon 2 open itunes the iTunes Software License agreement poped up quikly and disappeared and everytime i click on itunes it pops up and then goes away and im not able to click the agree button....i have restarted my computer completly so dat it can start fresh and then i download itune but the same thing keeps happenin....omg please help me...this problem has me frustrated i dont know wat to do anymore

Any help here?
http://docs.info.apple.com/article.html?artnum=302386

Please read this before you load SECURITY UPDATE 2010-006

I've just spent 72 hours with frozen cursors and frozen screens - so far all directly related to security update 2010-006. After successfully using SuperDuper! to erase my Internal HD and load a 2+ week old system without security update 2010-006 I seem to be fine again.
OK I have so much share-free ware on my MBP-13" (May 2010) running 10.6.4 that maybe I'm the only one on the planet to see this - but there is a 214 PAGE post for MBP-15 and MPB-17's freezing -- prior to Security Update 2010-006 ------ related or not, don't know.
I believe I will actually get a duplicate MacBook Pro (or at least a MINI with the same chip/speed) so that I can keep one clean and experiment (i.e. download stuff) on the other. Then if a problem, my life doesn't stop. I realize that from banking to photos to news to work to reports to my balance sheet to SKYPE to eMail to....... wow, and in 1983 I just had my HP calculators!! These Macs just have to work!
Best of success and comments welcome here.
Steve
11 Oct 2010

Thanks for the feedback! I think my system is now "OK" (hours of checks, with Apple as well etc. etc.) but likely there was a conflict - and since I don't know what - and since I can't remove everything right now - if this keeps working I just won't install the security update 2010-006.
BUT will this sneak up on me in security update 2010-007 or ??? I kinda have to get to the bottom of this - am actually thinking of buying a second, almost identical Mac (or at least a somewhat cheaper MINI 2.4 gHz) to have some backup beyond my external drives (which saved me!)
Thanks again and any/all comments truly appreciated.
Best regards,
Steve Schulte
Monday 11 October 2010

Need help setting up email on 10g

Okay, so I've run the utlmail.sql and the prvtmail.plb and it successfully completed. From what I understand I now need to do something like
alter system set smtp_out_server = '<ip-address:port' scope=Both;
My question is, how do I know what to put for the ip-address:port?
Another website describes configuring the SMTP_OUT_SERVER parameter like this......
alter system set SMTP_OUT_SERVER='mail.yourdomain.com' scope=spfile;
What would I use for mail.yourdomain.com?
Edited by: user632088 on May 24, 2010 2:25 PM

Well, I've got a 10g database on my home computer, but I don't exactly have a website or domain. My email account is with att/yahoo. I'm building an oracle application which will email out to a specified email address from a pl/sql procedure. What should I use for the SMTP_OUT_SERVER? The domain name for when I'm actually in my email or is it some IP address?

**New** Need help with your email?

If you’re forgotten your password (it’s so easily done), you need help setting up your email or you’re having problems with your email account please follow the step by step instructions to get help setting up and fixing any email issues you’re having.
Simply answer a few questions about your email account and what you need help with, and we’ll help with the rest.
Each step includes a helpful picture to keep you right.
We’d love to get your feedback on whether this helped you so please post on this board to let us know how you got on.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

- Go to Settings>iTunes and App Stores and sign out and sign into update/new account.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2

HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

I need help setting up my Imessage and FaceTime.I have tryed and its not working.

iOS: Using FaceTime
iOS: About Messages
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime

Please Read This if You Need Help Setting Up Email...

Similar Messages

Maybe you are looking for