Printing is very Slow on DotMatrix Printer

Hi,
I need to print the report directly on locally attached printer without appearing the printer selection screen. For this I implement the following code
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, RUNTIME); --- BATCH, RUNTIME
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, PRINTER);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT,'PDF'); --- 'html'
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'repserver');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_OTHER,'paramform=NO');
After execution , it gives the error " FILE DOES NOT BEGIN WITH '%PDF'
but when I simply use
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
Report is open in PDF format successfully.
1) How can I take the output directly on the printer.
2) How report can be taken fast on DotMatrix Printer,
( when if I take the print out from the PDF generated reports on only DotMatrix Printer it takes huge time, not the other laser printer. )
Kindly Help me
Regards.
Priya

I am printing to a R2400 with the same issue. I have everything up to date software, firmware, etc. I just updated to OS 10.4.5 and this actualy increased the speed by about 25% but it's still slower thtn should be expected.

Similar Messages

Printer running VERY slow

I have a HP LarderJet 300 and I just upgraded my MAC to Yosemite. The print is VERY slow. Color pics are not even printing.
I can not find if I need to upgrade the HP system?
Please help.
Randy

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printing and Digital Imaging.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

B210a is very slow started to print wirelessly

I recently purchased a B210a which I'm using wirelessly from my Apple iPhone, iPad, and a Mac. It takes over a minute to start printing from any of these devices. I've now connected a cable from my iMac and it is still very slow starting. Any suggestions?

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless printing is very slow

My wireless printing to my canon mp830 through my airport extreme is VERY slow. about 3 minutes a page, and that's a text page. i've read that this happened in a recent update. but i can't find any info on how to fix it. could someone please help me. thanks.

OK, first are you positive that the HP software you loaded on your Mac is compatible with 10.6? That is a common mistake that has special, non-obvious ways to correct.
You could try to set a static IP address if the software is not an issue.
Please advise on the software and we will go from there.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printer runs very slow.

I have a HP photosmart 3300 all in one printer. It runs very slow when printing. Do you know of a cure?

printer head problem need ching
tecnical support for hp printing

Print service very slow to forward the job...

Hi,
On 10.5.1 server, in the system preferences, i created a new printer in LPD (Fiery Z3000).
Then i started the print services ans published this new printer in "Bonjour".
All users can now create this new printer shared by leopard server and print through this serveur but i wonder why the 10.5.1 server keep the jobs a very long time (5-10 mn) before sending it on the right printer.
Do you know how i can setup Leopard server to print the job immediatly when it receives the PostScript file ?
Thank you
Marc

hi,
leopard server SHOULD relay the printing job to the printer immediately (at least it does so on my network). have you seen any log entries in the server admin for Printing or for DNS? Is DNS setup correctly for your printer (lookup and reverse lookup go to the same hostname/address?)?
br,
günther

Printing from CS3 under Vista to Windows 2003 server print que very slow

I just upgraded one of my machines to vista with CS3. I normally print to a windows 2003 server print spool que. When I go to print it takes forever to pull up my different printers and then go to properties. On my XP machines there is no problem, I can select the print que, go into properties for my printer and it works fine. Something with Vista, CS3 and WIndows 2003 server?
Thanks

shadeDream
Im curious about your 802.1x issues are. Im testing user profiles VS login window profiles for 802.1x on our Cisco wi-fi LAN right now, and I'm scratching my head on how the login window profile is actually supposed to work. Its a chicken-and-the-egg situation for me. I cant use user login window profiles, I have to use user profiles, which don't work very well in my environment for various reasons. Granted, it has improved since 10.5.3, but its still not working as I expect it to work. Do you have a Apple Discussion post related to this issue I can read?
Sorry for hijacking this discussion with off-topic content...

AEBS (2nd Gen) WPS printing is very slow

I recently purchased an HP Laserjet Professional 1102w (with Airprint) when Apple updated the utility to support WPS printer pairing. Occasionally documents will take upward 10 minutes to print when there is little complexity to the document. The printer will complete a page then wait several minutes to do the next page in the job. I believe this is something to do with the router because it is not evident when using tethered USB printing.

That tutorial really doesn't do anything any different than using the WPS configuration. That tutorial is just the manual procedure for the setup. It did illuminate one possibility for the slow printing. If you simply press the sign in the print & scan preference pane and add the "nearby" network printer you desire then it defaults to the Airprint driver for the device.
If you instead click "add printer or scanner" and select the printer from proceeding menu then it provides the ability to change the default driver to the HP Laserjet P1102w driver. I printed two consecutive multipage documents over the network without any delay. I will monitor the performance over the next several times I print and see if this is the true solution to the issue.
Intially though, it does appear that there is an Airprint driver issue either with the printer's handling of the protocol or something specific the Mac driver release. I haven't printed many items from my iPad or iPhone, so I can't really isolate it to a general Airprint driver issue or an Airprint support issue with this printer.

Photosmart 5524 wireless printing very slow or not printing

I bought a HP 5524 (CX047B) yesterday, and downloaded drivers from HP (Photosmart-5520-series_v12.23.0). It seems today that more recent drivers are available for OSX Mountain Lion 10.8.3, so I am now using HewlettPackardPrint2.13. I used HP Uninstaller before loading the drivers in both cases. Wi-fi signal is good (Apple Time Capsule 4th gen). The printer is intended for use by Mac users on a home network. At the moment it is not working properly.
I have not tried printing a photo yet...I tried printing an email I received (with a diagram) using USB connection, the results are fine. If I print using wi-fi the print job shows 'print file accepted' in the queue...but nothing happens for 2-3 minutes, and then if I am lucky the printer produces the header from the email. The printer then shows a message 'Cancelling' and eventually becomes free.
So at the moment I have a wi-fi network printer that can only be used f you walk your laptop down to it and use USB.
(fyi I have used a HP B209a-m as a wi-fi network printer for 3 years without problems, until it decided not to wotk earlier this week). Suggestions please. Clive Parfitt
This question was solved.
View Solution.

Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My PSC750xi printer is very slow

I have used this printer for a long time with few problems. Of late it runs very slowly, suddenly picks up speed then slows down again. It's like it prints a few lines then stops for a while to think about it, prints a few more then stops again, and so on. I have read what I can on the web - replace the ink cartridge, unplug power and connection, wait 30 seconds, etc., but to no avail. Suggestions would be appreciated.
I run a home tower computer with XP Home SP3, lots of free RAM (2MB), lots of free memory (250GB), 1.8GHz, well maintained.

I should have included that I run a home tower computer with XP Home SP3, lots of free RAM (2MB), lots of free memory (250GB), 1.8GHz, well maintained.

Error on server - printing stopped - Very First request to print any report

vs2010 sp2
CR13 sp1
CR12 developed reports requested in app with no mods
I'm getting there but I can't get the very first print request honored regardless of
size to print on the very first request but will print when re-requested.
A very large detailed report (+300 pages) errors as well. The running time is
over 1 hour from rendering to print. The printing starts to spool but errors.
I've caching, sessions to keep the large report alive.
I have also increased timeout on the server.
Thanks,
Isaac

Is is a website/web app
I found the following which makes sense in relation to initial prints etc.
Can you or someone tell me where to make this change in II6
which we are using on the sql server 2000 box (initially I was was told it was 2003)
ActiveX printing fails in the .NET web form viewer when IIS GZip Compression is in use. As a result, the following error message appears:
"A Communication Error Occurred. Printing will be stopped".
Cause
This is a known issue with Crystal Reports .NET. This issue has been assigned Track ID ADAPT00459349. At time of writing, there are no file updates to resolve this issue.
Resolution
To work around this issue, do one of the two suggestions offered below:
Disable compression for the following mime types:
application/x-eor (end of report)
application/x-ack (acknowledgement of printing finishing)
application/x-epf (encapsulated page format)
-OR-
Use HTTPZip instead of GZip for compression.
Thanks,
Isaac

Very slow network printing in Mac os 10.6

Hi,
I am printing to a HP2035n.
A networked printer.
I bought it while I still had 10.5
It worked like a charm - very fast.
I upgraded to Snow Leopard (10.6) with a new hard disk in the laptop.
After this, the printing is very slow. Painfully slow.
The queue window says "Connecting to the printer..." for each and every print job, and this takes 1-2 minutes for each print job.
Once a job gets started, the printer is very fast, 20 pages in a minute or so.
But when I print several print jobs (e.g. bank transactions today) I have to print 40-50 different print jobs, and the printing time takes several hours!
When I put back the old hard disk with the OS X 10.5, the printing goes very fast on the same hardware, network and wi-fi connection on the airport express.
How can I improve this situation?
It is unbearable.
Kim

Try resetting some of the hardware involved (PRAM~NVRAM). See this Apple KB for details, etc.:
http://support.apple.com/kb/HT1379
Can't hurt to try, and apparently this has helped others recently.

Printing is so slow

Hi everybody
I am using Reports 6i and developed reports in PDF format but printing is very slow on DMP Printers.
Thanks
Sachin Goel

Sachin,
If your aim to print , then you can do it directly from reports using destype=printer.
This would be much faster.
In 9i, you can use PDF compression to compress the PDF and that might make the PDF file size smaller and hence faster to print also
If you want to view and print, you could also think of postscript output of reports, view it in postscript viewer, print
Thanks
The Oracle Reports team
Thanks
The Oracle Reports

Different btn dotmatrix print and laser print

hello sap experts
how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
thanks in advance
regards
Jenny

Hi,
Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
Refer note:724904 for instructions printing in sap b1using dot matrix printers.
More over you have to set the alignment(as often it gets changed).
And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
I suggest you to go for laser printer if it is affordable by client.

LaserJet P2015DN Printing Is Very Faint. Is This Fixable w/Parts?

I ask this cause back in the old days a laserjet was something that deserved a new fuser, fuser roller or whatever. No matter what printing options I use, the printing is very faint on this printer. I have a second one that prints properly. I see online that there is no support available for this model any more. Does that mean there are no parts either? I guess for the price of a new replacement, it may not be worth dealing with it. But, I've got a dual paper tray version DN. I'd just as soon keep this one if I can.
Any help is appreciated. TIA.

Greetings,
I'm sorry to hear your nearly 15 year old printer is squeaking so loudly. I helped develop that printer and it’s always sad to hear that one is failing a customer. I fear I won't be able to help you root cause the problem, but I’ll certainly try. Here are some things to try::
1) Try installing a different toner cartridge. Sometimes the drum / seals / etc can make a noise.
2) Try isolating the noise to a component in the printer. Take a picture of the component and post it.
3) As I recall, the 5m printer has a replaceable fuser. It’s possible that the gears / rollers are worn to the point of making noise.
4) Try searching the internet for solutions to squeaks of other LaserJet models such as the LaserJet 4, 4+, 4000, 4050
For instance, here’s a link you might try: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl12433&prodTypeId=18972&pro...
Good luck!
--Phred
An HP employee

Printing is very Slow on DotMatrix Printer

Similar Messages

Maybe you are looking for