Production order confirmation using CO15
Hi ,
When i am confirming production order with reference to sales order using CO15 , material document is being posted only for assembly material , but not for components.
Please let me know how i can correct this.
Thanks in advance.
Regards,
sudheer
Sudheer,
You can display confirmation using transaction CO14, here you click the goods movement tab, and if you find GI items highlighted in Blue then these goods movement error needs to be reprocessed. Execute transaction CO1P and save the records there, then execute transaction COGI and clear the error records.
Regards,
Prasobh
Similar Messages
-
User Exit For Production Order Confirmation Using CO15 or COGI
Hi all,
I need user exit for the production order confirmation so that i can set
AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
Thankshi,
check these exits.
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
use the exit which contains both structures AFPO,AUFM. -
User Exit for Production Order confirmation with CO15
Hi All,
what User Exit I should use when validating batch when we do Production Order confirmation with CO15.
Not when we create or release a Production Order.
Will reward,
mindaugas
Edited by: Mindaugas Kazlauskas on Jan 30, 2008 5:03 PMHi
The Follwing Userexits available:
Transaction Code - CO15 Enter Production order Confirmation
Enhancement/ Business Add-in Description
Enhancement
CONFPP01
PP order conf.: Determine customer specific default values
CONFPP02
PP order conf.: Customer specific input checks 1
CONFPP03
PP order conf.: Cust. specific check after op. selection
CONFPP04
PP order conf.: Customer specific input checks 2
CONFPP05
PP order conf.: Customer specific enhancements when saving
CONFPP06
PP Order Confirmations: Actual Data Transfer
CONFPP07
Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01
PS confirmation: Determine customer specific default values
CONFPS02
PS confirmation: Customer specific input checks 1
CONFPS03
PS confirmation: Customer specific check after op. selection
CONFPS04
PS confirmation: Customer specific input checks 2
CONFPS05
PS confirmation: Customer specific enhancements when saving
CONF0001
Enhancements in order confirmation
CONFPI01
Process order conf.: Calculate cust.specific default values
CONFPI02
Process order confirmation: Customer spec. input checks 1
CONFPI03
Process order conf.: Cust. spec. check after op. selection
CONFPI04
Process order conf.: Customer specific input checks 2
CONFPI05
Process order conf.: Cust. spec. enhancements when saving
CONFPI06
Process order confirmation: Actual data transfer
CONFPM01
PM/SM order conf.: Determine cust. specific default values
CONFPM02
PM/SM order confirmation: Customer specific input checks 1
CONFPM03
PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04
PM/SM order conf.: Customer specific input check 2
CONFPM05
PM/SM order conf.: Cust. specific enhancements when saving
If it is helpful rewards points.
Regards
Pratp.M -
Serial nos entry during production order confirmation in CO15 - User Exits
Hi all,
Is there any user exit existing for a serial nos screen pop-up during production order confirmation.
Regards,
Sravan Kumar VHi,
For serial numbers at the time of goods receipt, u have to activate sr. no. mgt for that particular finished product. This can be done by assigning sr. no. profile in the material master record of that material in work scheduling view. once this is done , system will automatically prompt for sr. nos at the time of goods receipt. I am not aware about any user exit.
Thanks & Regards,
Vijay Patil -
Recording shift during Production order confirmation
Hi All,
Is there a way I can record the shift during production order confirmations using CO15, CO11 or CO11N? I do not see the shift field in the confirmation screen.
Thanks & Regards
Subbu SPDear,
If you don't want to use the standard functionality of SAP or you are on lower version then you can go ahead with enhancement.
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens by using this you can define shift in confirmation.
For more details refer this link,
Re: Shift usage in confimation.
<< Moderator message - Point begging removed
Points unassigned >>
Regards,
R.Brahmankar
Edited by: Rob Burbank on Oct 20, 2010 4:28 PM -
Price difference on cancellation of production order confirmation
Hi,
We are having a material which is maintained at price control "S". We have created a production order for the material. In due course of business, we did confirmation for say 100 pcs of the material. However, immediatly on confirmation, we realized that we do not need to do the confirmation & hence we did the cancellation of the production order confirmation using CO13.
On doing the production order confirmation cancellation, we observed that the system has posted some amount to "price difference account"
We also observed that once in a while this kind of entries do get posted.
It is requested to please let us know in why system is behaving this way?
We have checked SAP Note no 216080 "Price difference when reversing GI for S-Priced material" & SAP Note no 215980 'Price difference during GR for the production order". However we are not convinced that these could be the reason for the price difference.
Thanking you in anticipation
Regards
Santosh Kumar AgarwalHi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar -
Cancellation of Production Order confirmation (CO13) not generating TR/TO
Hi,
We are facing a typical issue in the PP-WM interface. When we create an order and confirm it (partial confirmation), the Goods movement happens (261 mvt type) as desired and the TO is created and confirmed in the background.
But, when we try to reverse the movement type (cancelling the production order confirmation using CO13) then there are no TRs or TOs generated in the background (for movement type 262).
When I manually try to post a material document for 262 movement type, it creates a TO in the background (as per the configurations that I maintained) but this does not happen when movement type 262 is called using PP interface.
The movement type configurations are all done for Automatic TR and TO generations - this works with normal IM process (when we manually post using MB1A transaction) but not with the return Goods movement happening with PP.....here, the material comes back to the interim storage type 914. We then need to create a TO manually and confirm it to take the stock back in to the original storage type and bin.
We want that when a process order confirmation is cancelled then the materials should be posted back in to the original storage type and bin (from where the material was issued against the order).
For Info: COGI shows no errors during the 262 movements, also, material document is generated for 262 movement type but no TR/TO generated.
Is there any configuration that we have missed?
Thanks and Regards,
ShankarHi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar -
Production order confirmation thru IDoc , IDoc has been processed twice
Hi Experts,
Good day.
I have a problem with my Production orders confirmation using IDoc automatic processing.
I have an IDoc that has successfully confirmed a Production order, the Idoc has a status of 53.
However, after a month, the Idoc has been used again on a different Production order confirmation, and the IDoc resulted again to status 53.
Could you kindly confirm if this a SAP standard behavior or an error? If this is an error, is there any available SAP notes that I can use.
Here is the spec of our system:
ECC 5.00 - SP SAPKH50015
Please kindly provide us your idea on this.
Thank you very much.
Kind regards,
Rosalinda Ines Aben
PP SupportHi Rosalinda, i have the same problem. You found some solution ?
Thanks a lot !!!.
Federico Cicerchia -
CO15 Production Order Confirmation - Serial Number
Hi Friends,
Kindly advise the Exits/Enhancements to enable the following entries while posting order confirmation through CO15 -
a) Propose the default confirmation quantity (say,... always default to '1')
b) Enter/include Serial numbers for the Finished product
c) Enter/include Serial numbers for the Components being backflushed
Best Regards,
Senthila) Propose the default confirmation quantity (say,... always default to '1')
Specify the requirement
b) Enter/include Serial numbers for the Finished product
If the proper profile for serial number has been selected, then it is automatically proposed
c) Enter/include Serial numbers for the Components being backflushed
Not backsflush is allowed for component having serial number -
Using employee in production order confirmation
Dear All,
I want to use employee number registration in production, order confirmation.
What transaction I must to use?
I checked PA40, but I don't need to implement HR module, and there are many other informations that I dont't use in PP.
I need for a name, surname, employee number, date for beginning, date for ending.
Can somebody tell me an easy way to do this?
Thank you very much!
Regards,
MarianHi
Go to PA40 enter the Personnel no. XXXX , From date and click manual hire then execute. Then enter the Personnel area, Employee group and Employee subgroup and save then you will get create personal data screen in that you enter name, surname, employee number, date for beginning, date for ending then SAVE.
If you follow the above procedure you can get the personnel number in confirmation screen.
Prerequisites:
You need to create in SPRO
1. Personnel area
2. Employee group
3. Employee subgroup
Thanks
S.Murali -
Is possible to create a TO automatically after production order confirmation?
Hi all
I have just a question in order to know if we can configurate a procedure to a Production Order, so my question
is possible to create a TO automatically after production order confirmation in a standard enviroment?
Thanks in advance for all your commentsHi Gurus,
Thank you for your help in this case.
Process:
The customer create a production order in CO01 and then they confirm the order in CO15, after confirmation TR is created ( we can see this in LB10 ) and negative stock is created ( we can see this in LS24 ).
Requirement:
They are asking to create the TO automatically after the production order confirmation. Negative stock is afecting the process.
Workaround:
They are creating the TO in background in LB10. ( negative is fixed )
Question:
Can we create the TO automatically after confirmation in standard configuration?
if no , how can we confirm this TO .using a JOB option?
TR created after confirmation
TR header
LS24 negative units.
Regards!!
Ronald -
Production order confirmation with BAPI
Dear PP friends,
I want to create a program to confirm production orders in mass at header level like CO15. To do it I am trying to use BAPI_PRODORDCONF_CREATE_HDR and it works fine for planned backflush.
However, I am not able to change data of goods movement (quantity, warehouse and batch). Is it possible?
What is the function of GOODSMOVEMENTS table?
I studied the following thread but I could not solve it.
Production Order Confirmation BAPI
Does anyone have suggestions?
Thanks in advance.
MarcosHi Caetano,
Thanks for your reply.
I tested BAPI_PRODORDCONF_GET_HDR_PROP and it proposes goods movements according with open quantity of the production order. In this case, would I have to adjust all movements with actual quantity?
Is possible to propose goods movements according with confirmed quantity?
Regards,
Marcos -
Serial Number. Production Order Confirmation. GR. UD. Sales Delivery
Hi Gurus,
Please help on this issue to get any user exits .....
As part of Serial number management, we have a certain issues on serial number confirmation, goods receipt from production order and quality inspection with UD.
Master data:
Finished product material master, Workscheduling view, Serial number profile maintained " ASRN"
Process flow:
1) Avalon Specific Serial numbers generation for finished goods through production order release status.
(A11206000001)
A - Avalon
1 - PCB Unit 1
12 - Year 2012
06 - Week
000001 - Running serial number for the week.
2) Production order confirmation through CO11n transaction.
3) Production order Goods receipt through MIGO transaction against order.
4) Quality Inspection with Usage Decision through QA32 transaction.
5) Goods Issue for Delivery.
SAP Product Error:
1) System does not track and control the operation wise confirmed serial numbers during order confirmation.
2) System does not track and control the finally confirmed serial numbers during order goods receipt.
3) System does not track and control the last goods receipt qty in Usage Decision.
4) For semi finished product, if we maintain serial number profile in workscheduling view, system is not showing goods issue material list in Co11n transaction for the finished goods.
5) Interfacing the serial number reading scanner with SAP, is not working without entering material number and serial number manually.
6) System does not tracking and controlling the last Usage Decision done serial number during Goods issue to Sale order Delivery.
Regards,
SanthaHi Santha,
This is a bit vast, but I'll try to address at least some of the issues:
1- serial number in operation confirmation is not possible, for the reason that serailization is part of stock management, and as WIP in an order, this is not stock yet. Actually you cannot confirm the manufactured material either, and those 2 go together.
For tracking specificly WIP, there's something called WIP batches; you may look into it to see if you can use it.
2- during GR system will propose those SNs that you have defined for the order at release or creation.
3- ?
4- GI in CO11N is provided only for BACKFLUSHED material components. Serialized materials CANNOT be backflushed.
5- You can use a barcode reader to read the serial number (instead of keyboard entry) when cursor is on the right field in the respective screen.
6- ? -
Change Work Center during production order confirmation
Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marianonce a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary. -
URGENT: Prob with Production Order Confirmation
Hi Gurus,
I have a problem with Production Order Confirmation.
When I am confirming a Prod Order and if the components present are more than '999', then error is being thrown and Material Document Number is not being created.
I want to split the records into 500 slots and pass them at a time for the creation of the Production Order so that it doesnt throw me an error while creating a Material Document No.
While saving the Production Order confirmation order, it should split the records into 500 slots each and then create Material Document No for each slot.
Can anyone please help me out in this regard, how to solve this.
Thanks & Regards,
Harish KallaHi Harish,
This problem is addressed in OSS Note : 36353
The Symptom reads like this
==========================================================================
When you post documents using the AC interface (from SD, MM or other applications), items appear in the FI document which are identical in all or in almost all fields.
This can also cause error message F5 727 ("Maximum number of items in FI reached"). The system issues this error if more than 999 items occur in an FI document.
===========================================================================
This Note is an elaborate one..
Hence, go through this and ask your FI Consultant to help you in this regard.
All the best..
Regards,
Siva
Maybe you are looking for
-
Error 150.30 with Photoshop Elements
My Windows 7 PC died, and I've transferred photographs to my old Dell XP machine. When I execute Elements, I get the error 150.30 message asking me to restart the maching. I did that, but still get the error when executing Adobe.
-
How do you open a modal window from an Edge Animate button?
I am trying to create an animated group of buttons that open a Bootstrap 3 modal window when clicked. The animation (OAM file) is placed on the Bootstrap page. This code is added to Animate "CREATION COMPLETE" for button creation and button click: //
-
Mail crashes in 10.9.2
Mail keeps crashing since updating to 10.9.2 Any help would be gratly appreciated. Here's latest diagnostic report: Process: Mail [37548] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version:
-
How do I show Safari webpage from my apple computer to appletv
I just bought apple tv and am trying to display the safari webpage from my MacBook onto the apple tv monitor. I tried selecting the airplay in my itunes account but that doesn't seem to help with Safari. Any advise? Thanks
-
I am using a math homework website, Webassign.net, and certain features that were displaying normally a few days ago are suddenly not displaying now, and a link to the textbook is not displaying the content either. My plug-ins are all updated, I chec