Profile profile_name does not exist
I've got a fresh install and I can get my wireless up and running by commands.
ifconfig eth0 up
iwconfig eth0 essid mywlan
wpa_supplicant...
dhcpcd eth0
and as the Network_tutorial suggests, I created a mhrwlan file in /etc/network.d/ with the following content:
CONNECTION="wireless"
INTERFACE=eth
SCAN="yes"
SECURITY="wpa"
ESSID=mywlan
KEY="SomePasskey"
IP="dhcp"
but after issuing:
netcfg /etc/network.d/mhrwlan
I get :
Profile "/etc/network.d/mhrwlan" does not exist
Please tell me what's wrong.
Regards
Thanx, it did the trick, But could you also tell me where exactly should I invoke this command to avoid running it each time the computer boots up?
should I put it in /etc/rc.local or sth?
Last edited by mahan_h (2009-03-18 06:05:41)
Similar Messages
-
Subject profile category does not exist CRM_SUBJECT_PROFILE001
I have configured charm in our Dev system.
In transaction solution_manager ->change request management-> create
I get the following message:
Subject profile category does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001
Did I miss something in the configuration?
I configured a test system some time ago and did not have this issue.
Thank you!Answer found, note 898614
-
Subject Profile Category does not exist
Hi,
System: CRM2007
I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
"Subject profile category Y does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001"
Why does it not work?
Thanks
AnkeHi,
For which scenario are you using the subject profile??
If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
Regards,
PePe -
Settlement profile does not exist
Hi Gurus
I am getting an error while creating a Sales order "Settlement profile does not exist" . Error description is "The system has found a settlement rule that is assigned to settlement profile ZSOR. However, this settlement profile does not exist".
I checked in settlement profiles ZSOR does not exist there as per the error description. I am getting this error because of settlement profile is assigned to planning strategy 20.
I tried changing the settlement profile but the field was greyed out.
So i need your help in changing the settlement profile in planning strategy.
Thanks in advance.
Quantum.Dear,
Menu Path: SPRO > Controlling> Product Cost Controlling > Cost Object controlling > Product Cost by Sales Order > Period end Closing > settlement > Create Settlement profile.
The finding of a requirement type is done via combination of item cate-gory and MRP type in transaction OVZI. Check which which requirement type is set with of item category and MRP type.In transaction OVZH you will find the combination of requirement typeand requirement class and in transaction OVZG you can customize thesettlement profile for the chosen requirement class.
Or don't assign settlement profile to requirement class.
IMG>SD>Basic Functions>Account Assignment/Costing>Maintain Requirements Classes For Costing/Account Assignment.
Goto OKO7, choose option settlement not allowed for sales order.
It will solve your problem.
Regards,
R.Brahmankar -
Profile does not exist on server error message
I am able to sign in to the support community, but when I try to update my preferences it says my profile does not exist on the server. Any Ideas?
Hi, Jon -
The new design for these forums does not handle usernames (aliases) with special characters in them very well. In this context, 'special characters' includes accent marks and, in your case, the use of a slash as in "Mac/Video" and probably the inclusion of the colon after "Jon". Some of the symptoms reported include not being able to log in at all, or not being able to get to one's Profile (because the system can't find it).
I will ask the Hosts to get in touch with you about fixing things so you can re-acess your account settings. -
Partner profile LS PIBCLNT100 SYNCH does not exist
Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfully created a message type u201CZCREMRu201D and generated the model view in tcode BD64.
Unfortunately when I try to distribute the model and choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Questions:
Where do I need to create a partner profile for SAP PI (XIB:100)?
Which message type do I need?
Which parameters inbound/outbound and which process codes do I need?
Thank you very much!
regards
ThomHi!
Many thanks!
Unfortunaltely I cannot find the process code "SYNCHRON"
for message type "SYNCH".
Could you tell with process code do I need for the message type "SYNCH"?
How is it possible to create a new process type and assign them to message type?
Thank you very much!
regards
Thom -
When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar -
[Solved] Error : The file or folder path /Probl?me 1 does not exist
Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders. -
Hello friends,
Ive configured Alert Framework and I get Alerts via email. Under the mail there are 2 links:
<b>Message Monitor:</b> http://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
<b>Message Monitor (Safe Connection):</b> https://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
If I click on the first link I get this error:
MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
Stack trace for the above error message is:
com.sap.aii.rwb.exceptions.WrongMBeanException: MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
at com.sap.aii.rwb.core.XIComponent.getSubComponent(XIComponent.java:313)
at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedXIComponent(AppMainModel.java:151)
at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:422)
at com.sap.aii.mdt.web.MonitorDynPage.doInitialization(MonitorDynPage.java:238)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:105)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
And for the second link I get a "page could not be displayed" error
How comes that XI makes these 2 links standard?
Do anyone has eny suggestion what to do and where to look for these errors?
Kind regards,
KamranHi Kamran,
the problem might be that in the Exchange Profile
the property 'com.sap.aii.connect.integrationserver.name' contains the
host name "HOSTNAME" (i.e. capital letters) whereas the Integration
Server registers with the SLD under "hostname" (lower case). The URL to the message
monitor is currently build from the Exchange Profile entry instead of
the SLD entry. This is usually not a problem since in general the host
names are given in small letters.
As a workaround, you can replace the Exchange Profile parameter
'com.sap.aii.connect.integrationserver.name' with "hostname" (lower case) and check if
that helps.
Regards,
Jaime -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Error installation - Payload path does not exist and no media record specified.
Hi all,
When I tried to install the photosohop CS5, the below errors keep prompting out. Can anyone help me solve these errors! Thanks!
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 70 error(s), 58 warning(s)
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 Dolby WRAPPER X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 PCI WRAPPER X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
Family: Adobe Web Suite CS5
ProductName: Adobe Media Encoder CS5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - SiteCatalyst NetAverages: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Creative Suite 5 Master Collection: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Adobe Player for Embedding: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - AdobeHelp: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Adobe BrowserLab CS Live: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Illustrator CS5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - HIL Help Search: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Adobe Illustrator CS5_AdobeIllustrator15en_GBLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failedHi,
I have followed the instructions and download the products, but there is still error.
I have downloaded the one that is circled in red. is that compatible with my com?
And these are the errors:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 45 error(s), 41 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding 3.1.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {15FEDA5F-141C-4127-8D7E-B962D1742728} Adobe Photoshop CS5 12.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failed
Thanks. -
ORA-27101: shared memory realm does not exist
Hi all
I have a problem related to sap xi-7.0 server.
when I start server than dispature is not started . and the trans file show these problem , i am past the this trans file ,
so plz solve this problem,
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.02.2009 - 01:11:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:52 2009 3963 0.003963
4 ETW000 [dev trc ,00000] db_con_init called 710 0.004673
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 188 0.004861
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 71 0.004932
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 74699 0.079631
4 ETW000 [dev trc ,00000] using "D:\usr\sap\D10\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 75 0.079706
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 19 0.079725
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 22 0.079747
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 5493 0.085240
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 42 0.085282
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 91 0.085373
4 ETW000 [dev trc ,00000] New connection 0 created 59 0.085432
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.085464
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 43 0.085507
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 17 0.085524
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 21 0.085545
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 9668 0.095213
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:54 2009 1849124 1.944337
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 58 1.944395
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 1.944418
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:55 2009 511982 2.456400
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 59 2.456459
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 18 2.456477
4 ETW000 [dev trc ,00000] Connecting as /@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 44 2.456521
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 39103 2.495624
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 31 2.495655
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 31702 2.527357
4 ETW000 [dev trc ,00000] Allocating server context handle 47 2.527404
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 230 2.527634
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:01 2009 5281432 7.809066
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 67 7.809133
4 ETW000 [dev trc ,00000] Allocating user session handle 56 7.809189
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 2370 7.811559
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 656067 8.467626
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 16 8.467642
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 19 8.467661
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 23932 8.491593
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 64 8.491657
4 ETW000 [dev trc ,00000] Try to connect with default password 83 8.491740
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 21 8.491761
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 21 8.491782
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 21 8.491803
4 ETW000 [dev trc ,00000] Allocating server context handle 48 8.491851
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 35 8.491886
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:02 2009 458152 8.950038
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 56 8.950094
4 ETW000 [dev trc ,00000] Assigning username to user session 0246F9C8 17 8.950111
4 ETW000 [dev trc ,00000] Assigning password to user session 0246F9C8 35 8.950146
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 24 8.950170
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 234917 9.185087
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 799 9.185886
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 42 9.185928
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 1364 9.187292
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 61 9.187353
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dblink#3 @ 431]
4 ETW000 10170 9.197523
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available 49 9.197572
4 ETW000 ORA-27101: shared memory realm does not exist [dblink#3 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'D10'"Hello Pankaj,
Try starting Oracle database from SQL plus using orasid as user and then start SAP
Refer to Note 491174 and perform all the tests as mentioned
You will be able to solve it
Let me know if it helps
Rohit -
We have several users using OLS V4.2 on one of our citrix servers. However, one of our users can upload an excel sheet into OLS. She always gets the error :
Package Result = Error]
Package: Import excel V2
Appset: Blagden
Application: SALES
Request Time: 2009-04-14 16:56:18
Start Time: 2009-04-14 16:56:18
End Time: 2009-04-14 16:56:18
Total Time: 00:00:00
TOTAL STEPS 8
1. Assign initial parameters: completed in 0 sec.
2. Create Temp Table: completed in 0 sec.
3. Transform Data Task1: completed in 0 sec.
4. update: completed in 0 sec.
5. update rejected: completed in 0 sec.
6. Transform Data Task2: completed in 0 sec.
7. Convert data: completed in 0 sec.
8. Load and process: Failed in 0 sec.
[Selection]
XLFILE= DATAMANAGER\DATAFILES\FL_sales reporting outlooksoft_FL1_FL3_A2009_03.xls
SHEET=TOTAL
TRANSFORMATION= DATAMANGER\TRANSFORMATIONFILES\my Files\import historical data.xls
CLEARDATA= No
RUNLOGIC= Yes
[Messages]
[ The load file does not exist ]
I deleted the user from the userlist and reprocessed security. I added the user again in the admin group and reporcessed user security. Same error.
When the user logs on on citrix using her profile and starts Webexcel using my profile - no problem.
My profile has administrator rights and she may not have them. So I really want her into the usergroup.
We renamed the file to upload to a file with 8 characters - same problem.
Anyone any experience with this error and how to solve it ?
Thanks for your reply.
JohanHello,
From what I understand from your log file, this is a custom import package. It is failing into the last step, loading data into the cube and it seems there is no file to be loaded. If the same package is working well for the other users, this means that the user has not enough security rights to load data from that file (maybe the file contains data for which the user is not authorized to see).
To understand better what is happening, just try to activate the debug using the DEBUG(ON) instruction into EvModifyPackage. This will create more information regarding the parameters passed to your tasks and you will be able to identify the file name passed to Dump&Load task.
You can verify then into Private publication\user name\Temp files the content of file (and the content of all temporary files generated by your package) and this will help you to understand where is the problem.
Hope this can help you,
Mihaela -
Hi there,
same Thread I post in "Portal Developement". Now I try my luck in ths category...
we implement ESS (ERP2004 with WebDynpros) in our testsystem, but we got an error and don´t know what to do...
System Landscape:
- mySAP Enterprise Portal 6.0 SP17
- Java Application Server (excluding from HR)
- mySAP ERP2004 HR-System
The Connections from the portal runs to the Java-App-Server, not direct to the HR-System (HR-System has no Java Installation and our Customer don´t want a installation, because it could be a bad performance)
We implement the Jco´s and fill out the usermapping. If we want to call the firstpage of the new ESS-Role we get this error.
Can anyone help us? Do we need some installations?
Best regards
Christian
Error
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
... 54 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4015.00.0000.20051123162612.0000 (release=630_VAL_REL, buildtime=2005-12-14:21:51:22[UTC], changelist=377533, host=PWDFM026)
J2EE Engine No information available
Java VM Classic VM, version:1.4.2, vendor: IBM Corporation
Operating system AIX, version: 5.2, architecture: ppc64
Other
Session Locale de
Time of Failure Thu Jan 11 16:14:11 GMT+00:00 2007 (Java Time: 1168532051021)
Web Dynpro Code Generation Infos
sap.com/pcui_gp~xssutils
SapDictionaryGenerationCore 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:45[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:57[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:14:40[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:46[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:36[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4018.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-09-20:21:00:39[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4018.00.0000.20060823112248.0000 (release=630_REL, buildtime=2006-09-20:21:09:40[UTC], changelist=415252, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
SapWebDynproGenerationCore 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:15:10[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
sap.com/tcwddispwda
No information available
sap.com/pcui_gp~xssfpm
SapDictionaryGenerationCore 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:45[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
SapDictionaryGenerationTemplates 6.4018.00.0000.20060530191647.0000 (release=630_REL, buildtime=2006-09-20:21:03:57[UTC], changelist=405154, host=PWDFM027.wdf.sap.corp)
SapGenerationFrameworkCore 6.4015.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-11-24:21:18:08[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:14:40[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
SapMetamodelCommon 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:46[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelCore 6.4018.00.0000.20060302125746.0000 (release=630_REL, buildtime=2006-09-20:20:56:36[UTC], changelist=392271, host=PWDFM027.wdf.sap.corp)
SapMetamodelDictionary 6.4018.00.0000.20060302125547.0000 (release=630_REL, buildtime=2006-09-20:21:00:39[UTC], changelist=392265, host=PWDFM027.wdf.sap.corp)
SapMetamodelWebDynpro 6.4018.00.0000.20060823112248.0000 (release=630_REL, buildtime=2006-09-20:21:09:40[UTC], changelist=415252, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationCTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
SapWebDynproGenerationCore 6.4018.00.0000.20060823112633.0000 (release=630_REL, buildtime=2006-09-20:21:15:10[UTC], changelist=415262, host=PWDFM027.wdf.sap.corp)
SapWebDynproGenerationTemplates 6.4018.00.0000.20060915154217.0000 (release=630_REL, buildtime=2006-09-20:21:52:30[UTC], changelist=417774, host=PWDFM027)
sap.com/tcwdcorecomp
No information available
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.xss.ser.xssmenu.model.types.P_Pernr could not be loaded: com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:314)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:669)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:855)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:158)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:143)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:135)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$ComponentUsageManager.createBLCComponentUsage(FPMComponent.java:628)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:773)
at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeader.onInit(VcXssMenuHeader.java:196)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeader.onInit(InternalVcXssMenuHeader.java:225)
at com.sap.xss.ser.xssmenu.vc.header.VcXssMenuHeaderInterface.onInit(VcXssMenuHeaderInterface.java:162)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface.onInit(InternalVcXssMenuHeaderInterface.java:144)
at com.sap.xss.ser.xssmenu.vc.header.wdp.InternalVcXssMenuHeaderInterface$External.onInit(InternalVcXssMenuHeaderInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:370)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:608)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: com.sap.dictionary.runtime.DdException: Type com.sap.xss.ser.xssmenu.model.types.P_Pernr does not exist
at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
... 52 moreHi,
uhm... good question, long time ago...
Error should be in the JCO-Destinations, where you can choose a targetsystem for each Jco-Destination.
Since them we installed a java on the abap-system, so we have a doublestack.
In the Jco Destiantions must be the ABAP-System.
Application via SAPTicket and MetaData via fix User like DDIC.
Regards
Christian
Maybe you are looking for
-
Error while Replicating Datasource from R/3
In R/3 extraction, after activating the datasource in R/3 and replicating the datasource in BI, I received an error saying that 'SQL error occured when accessing a table' with Message no. RSAR051... Help me in this.
-
When I drag the downloaded Foxfire 5 install file to my Applications folder, it shows up as an .exe file. When I double click to run it, I get an error message saying it is not DOS executable.
-
Can someone help me, changing the screen AV
ive been looking through my keyboard hotkeys for about 45 mins, and i cant seem to find the hotkey to change the imac screen AV for my mini tv port, as ive got my xbox connected to it....any ideas?
-
OBBH enhance F-28,F-32.... to populate the Profit center
HI All, I need to enhance F-28,F-32.... to populate the Profit center based on the condition. I have implemented exits and BADI's none of them were suitable. I saw some substitution OBBH process in online that weren't in detail I was not sure what
-
I'm trying to achieve a blowout highlight look that is used on TLC shows like Miami ink and L.A.INK. With which plug in and how can I achieve this?