Program to produce multiplication table

Hi all,
     somebody tell me how to produce a multiplication table in abap. I tried doing this, the values are coming to the internal table but ia am unable to get the output.
Please help me out cos i have to use a similar looping condition in my bdc work.
DATA : BEGIN OF ITAB OCCURS 0,
            NUM1 TYPE I ,
            NUM2 TYPE I ,
            NUM3 TYPE I ,
            END OF ITAB .
DO 10 TIMES .
ITAB-NUM1 = ITAB-NUM1 + 1 .
DO 10 TIMES .
ITAB-NUM2 = ITAB-NUM2 + 1 .
ITAB-NUM3 = ITAB-NUM1 * ITAB-NUM2 .
ENDDO .
IF ITAB-NUM2 IS NOT INITIAL .
ITAB-NUM2 = 0 .
ENDIF .
ENDDO .
ENDDO .
LOOP AT ITAB .
WRITE : / ITAB-NUM1, '*' , ITAB-NUM2 , '=' , ITAB-NUM3 .
ENDLOOP .
Regards
Tharanatha H.

Please   go through this Bdc   program   in this i had used the internal table of your required logic ..
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4) TYPE C,
       EKORG(4) TYPE C,
       KTOKK(4) TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3) TYPE C,
       SPRAS(2) TYPE C,
       AKONT(6) TYPE C,
       FDGRV(2) TYPE C,
       WAERS(3) TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3) TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = 'C:VENDOR.TXT'
   FILETYPE                      = 'ASC'
TABLES
DATA_TAB                      = IT_DUMMY.
<b>LOOP AT IT_DUMMY.
   IF IT_DUMMY-DUMMY+0(2) = '11'.</b>
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK..
<b> ENDIF.
ENDLOOP.</b>
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
reward points if it is usefull ....
Girish

Similar Messages

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

Crystal Reports and connecting to multiple tables in a dataset - I'm Going Crazy!!

This is my first application, first report and first everything. Wouldn't you know the report I am trying to produce is probably more difficult!! What is happening is that I have a form(screen) up in my application with the information displayed on it from a recrod in a table that I want to put on a report to be view and/or printed and eventually down the road I want to incorporate a signature. One step at a time though, here is what I have accomplished. I have created the report, I have gotten it to display in the viewer but it will not push the data from the table that I want displayed. It only displays the text that I have typed on the form. This is a Visual Basic application created in Visual Studio 2005 using a SQL database. If you need more information then just ask and I will try to fumble through and tell you what I know. (Oh and to top it off............I am also trying to get information to display from other tables also (codes connected to descriptions etc.))
Any help would be really appreciated as I have went through tutorials, read white papers, tech notes and anything else I can find but I just can't get it to work!!
Thanks!

You do need to give more information. To better help, we would need to know the database, when you say SQL do you mean SQL Server, how you created the dataset, whether there are multiple tables in a single dataset or multiple datasets, etc.
The report appears to be running so the underlying issue as you know will likely be the dataset. You may want to confirm the dataset does in fact have data in it. Returning a simple count will let you know there are rows. If you used the components rather than code to create the objects you can also see the data returned in the fill process.
Once you know you have data in the dataset, you can check your reports connection to the dataset.
Just hang in there... the problem is probably a simple fix. I am sure others will follow on with more suggestions.
Regards,
John W.

Multiple table of contents in one document

I would like to create multiple table of contents in one document. It would look something like the layout below. Each of the documents is a standalone FrameMaker file. Is this possible? I'm wracking my brain for ideas. Thank you!
Salome
TABLE OF CONTENTS
Group 1 Program
Document: Alligator
Document: Bear
Document: Camel
Document: Deer
Document: Eagle
Group 2 Program
Document: Fish
Document: Giraffe
Document: Hippopotamus
Document: Iguana
Document: Jaguar

lawrence,
Pages will only accommodate one TOC, I'm sorry to say. The others will have to be generated manually.
-Dennis

Importing CSV files into Multiple Tables in One Database

I have a web based solution using Microsoft SharePoint and SQL Server that is created to centralize dat collection and reporting of program metrics used in montly reviews.
A person from each program enters dat manual or by pushing the data using automated data import tools. The user then is able to generate reports and provide presentations to their stakeholders.
There are are programs that are located in US and 2 that are located in Japan. All, including programs in Japan use the MS Project with a plug-in tool that allows them to auto input data. When the user click the "Send To.." button, the data goes
in to multiple tables in one database.
Everything is set up exactly the same for every program; however, we have discovered becase of a firewall, along with some of the different settings that the MS Project has over in Japan, the 2 program users are not able to auto import their data.
The suggestion is to have the program users export the MS Project file into a CSV and email it. I will then take it and convert the data, such as the dates and place them on a Network Drive. There will be 2 folders, one for each program.
I feel it will be an easy process just to load the data from the Network Drive into the same tables that are created for auto import.
My Concerns/Questions:
1. Should I create 1 SSIS package or should there be 2, one for each program?
2. US and Japan program users send their data once a month. The converted files are going to be saved in the location marked with a date (ex:201402). How can i have it to where SSIS will automatically load the data every time i place new files in the designated
folders or when i update an exsisting file?
Can you provide an example with your suggestion please?
I greatly appreciate the assistance!
Y_Tyler

Hello Vikash,
Thank you! This will help me get started.
There will be 2 folders, one with files with Program A data and the other with files with Program B data. All will have the same fields, just coming from different programs. You stated that I will be able to to load both in one package. Would there be two
paths since there will be two separate folders?
Using the example you provided, i am confident that I can create the package using one path into one table but not sure how to get the files from 2 paths (if there is) into multiple tables.
Can you help clarify this for me?
Thank you!
Y_Tyler

Reports using multiple tables

I am trying to create a report using portal that use links between multiple columns. The info I want is mainly in two tables. Some of the info in the table is numeric (Foreign Keys). I want to display them in readable format so set up joins to the respective parent tables. When I do this the result only produces 12 lines of output irrespective of the number of lines I set per page. When I show only the data from the main tables, without the joins to the other parent tables, i.e. the foreign keys as numbers I get all the rows. I have tried to create the report by using all three options given but get the same result.
I am using 9iAS verison 1.0.2.0 and Portal version 3.0.7.
Can someone please explain why this happens and how I can solve this problem urgently.

Hi Ashok,
Sorry for posting the solution with delay. Actually I ran into the similar situation and upon deep analysis, I could crack it., the very next day.
This is how your write back template should be for updating on multiple tables
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="WRITE">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE FACT SET COUNT = '@{c4}', W_UPDATE_DT = CURRENT_DATE
WHERE EXISTS (SELECT ROW_WID FROM DIM WHERE DIM.ROW_WID = FACT.DIM_WID AND
DIM.X = '@{c1}' AND DIM.Y= '@{c2}' AND DIM.Z = '@{c3}' ) AND EXISTS (SELECT ROW_WID FROM DT WHERE DT.ROW_WID = FACT.DT_WID AND DT.PER_NAME_YEAR = '@{c0}') </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
=====
Using exits, will improve the performance.
Hope it helps. If yes, pls award points. Thanks
Regards,
Sarat Nallapati

How to update multiple tables using results from query

I'm a bit rusty on this stuff and am hoping for some help.
Table 1 is:
location_id, location_name
Table 2 is
location_id, employee_id and misc. other columns
Then there are multiple tables with associated data, keys being location_id and employee_id.
There are no established relationships.
Trying to come up with a process to change location_id for all employees assigned to a particular location.
It seems to me that the basics are
select employee_id from Table2 where location_id='xxxxxx'
Then take each employee_id returned and change their location_id in each of the other tables
I'm not clear on how to load the returned employee id's as variables and then loop through them.
Thanks

Thanks for the welcome. I'll read up on the rules now.
Below is the DDL for a couple of the tables.
Version = 11g
I would query the users table for all users with a certain site_id and then use them to update the site_id in the users table (and other tables)
-- DDL for Table USERS
CREATE TABLE "USERS"
(     "USERID" VARCHAR2(8 BYTE),
     "PASSWORD" VARCHAR2(50 BYTE),
     "FIRST_NAME" VARCHAR2(50 BYTE),
     "LAST_NAME" VARCHAR2(50 BYTE),
     "SITE_ID" VARCHAR2(5 BYTE),
     "ROLE_ID" VARCHAR2(1 BYTE)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "SITES_DATA_TS"
CACHE ;
-- DDL for Table EMPLOYEE_PROFILE
CREATE TABLE "EMPLOYEE_PROFILE"
(     "EMPLOYEEID" VARCHAR2(9 BYTE),
     "PROGRAM" NUMBER,
     "REQUIREMENT" NUMBER,
     "JOBNUM" VARCHAR2(50 BYTE),
     "STATUS" VARCHAR2(50 BYTE),
     "PROGRAM_TYPE" VARCHAR2(50 BYTE),
     "SITE_ID" VARCHAR2(5 BYTE),
     "NUM_QUAL_TEST_ATTEMPTS" NUMBER(7,0)
) SEGMENT CREATION IMMEDIATE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "SITES_DATA_TS"
CACHE ;

Extracting Multiple Table Data Dynamically..Table is an Input parameter

Hi All
Can any one update the Program/design of extracting multiple table data as a list or to an excel sheet
For eg:- Mutliple Tables are entered in selection screen and upon executing the output should be to an excel sheet sequenctially according to the table names entered in the selection screen
Awaiting for your update
Regards
Shiva
Edited by: shivakumar bandari on May 29, 2009 9:35 PM

HI Naimes
Thanks for youe reply
your second step says to select data from 'table' here tables are dynamic in nature I mean they are an input parameters..how can I write select on a table..
I can get the table existence from DD02L table and pass the retrieved tables to FM Get_Component_List to get the fields existing for the particular table,
But I cannot pass the dynamic table value to select query to retrieve the data..Please update me if you have anything on retrieving data from dynamically inputted value
Can I do this
Select * from <dyntable>
Any suggestions will be appreciated
thank you

How do I total across multiple Tables? Help!

how do I total across multiple Tables? Help!
I feel like a complete noob.

Hi Marc,
There is no function explicitly for that sort of array calculation in Numbers.
My favorite way is to use a list of Table Names and the INDIRECT(ADDRESS) function combination to produce a SUM across tables. I'm making the assumption that you want to do something like adding up all the values in a particular cell of multiple tables. For example "give me the total of all the A1 cells in tables T1, T2, T3 and T4". For this I would use the formula:
=INDIRECT(ADDRESS(1,1,1,,A))
to grab the cell contents of the table names mentioned in column A of a summary table. Once you have them collected in your summary table, add them up.
Here's a screen shot...
Hope that gives you an idea for approaching this problem.
Jerry

Clarification on Multiplication Table

Hi! I have written the following program on multiplication table but the output is slightly different from expected and I do not know where has went wrong. Pls help!l
The question is, if x=5 and y=6, the output shld be
1*6=6
2*6=12
3*6=18
4*6=24
5*6=30
If x=3 and y=4, the output shld be
1*3=3
2*3=6
3*3=9
4*3=12
import java.util.*;
public class multiplicationTable
static Scanner console = new Scanner(System.in);
public static void main(String args[])
//variable declaration
int x;
int y;
int result;
System.out.print("Enter the value X: ");
     x = console.nextInt();
System.out.print("Enter value Y: ");
     y = console.nextInt();
for (int i=1; i<=x; i++) {
    result = i * y;
    System.out.print( result );
    System.out.println( i + " * " + y + " = " + result + "\n");
Output
--------------------Configuration: MultiplicationTable - JDK version 1.5.0_19 <Default> - <Default>--------------------
Enter the value X: 3
Enter value Y: 4
41*4 = 4
82*4 = 8
123*4 = 12
Process completed.

Solution found....
import java.util.*;
public class multiplicationTable
static Scanner console = new Scanner(System.in);
public static void main(String args[])
//variable declaration
int x;
int y;
int result;
System.out.print("Enter the value X: ");
     x = console.nextInt();
System.out.print("Enter value Y: ");
     y = console.nextInt();
for (int i=1; i<=x; i++) {
    result = i * y;
    System.out.println( i + " * " + y + " = " + result + "\n");
}

How can one make a Distinct Multiplication Table ?

This Code make Multiplication Table :-
BEGIN
FOR I IN 1.. 12 LOOP
DBMS_OUTPUT.PUT_LINE('---------------------['
||I
||']----------------------');
FOR J IN 1.. 12 LOOP
DBMS_OUTPUT.PUT_LINE(I
||'*'
||J
||'='
||I * J);
END LOOP;
END LOOP;
END;
---------------------[1]----------------------
1*1=1
1*2=2
1*3=3
1*4=4
1*5=5
1*6=6
1*7=7
1*8=8
1*9=9
1*10=10
1*11=11
1*12=12
---------------------[2]----------------------
2*1=2
2*2=4
2*3=6
2*4=8
2*5=10
2*6=12
11*7=77
11*8=88
11*9=99
11*10=110
11*11=121
11*12=132
---------------------[ 12 ]----------------------
12*1=12
12*2=24
12*3=36
12*4=48
12*5=60
12*6=72
12*7=84
12*8=96
12*9=108
12*10=120
12*11=132
12*12=144
PL/SQL procedure successfully completed.
=====================
that's good , but I want to change my code to perform a distinct results .
by accurate meaning , if this result happen ( 1*12=12) than I don't it repeat
again like (12*1=12) or (2*6=12) .... ect.
is there any suggest ?!

Just store your results in hash table and before output check, whether results already been produced.
declare
type res_t is table of number index by binary_integer;
results res_t;
begin
for i in 1 .. 12 loop
    dbms_output.put_line('---------------------[' || i ||
    for j in 1 .. 12 loop
      if not results.exists(i * j) then
        dbms_output.put_line(i || '*' || j || '=' || i * j);
        results(i * j) := i * j;
      end if;
    end loop;
end loop;
end;Best regards
Maxim

Resizing multiple tables

I missed the original questions so, I open a new thread to give you responses which alas aren't pleasant.
I have a document with 18 separate/discontiguous tables and they are all a little too narrow. I want to resize them all a little wider to fit their columns.
Is there any way to resize multiple tables at once rather than one at a time?
The response is NO
I have tries using Apple-click to select multiple tables & resize them all at once (like we did in AppleWorks) but when I go to resize the rest become inactive & only 1 resizes.
Why are you using the past to speak of AppleWorks? I do the trick at this time with AppleWorks and I will continue to do it for months.
Am I missing something? Or is this onother one of my unanswerable questions. (That'll make #6)
I apologize but I'm unaware of the other five
And here I am trying to change the borders on the tables. I wanna put a cotted line at the bottom of the cells in ALL the tables at once, but ANY changes to all 18 tables at once grinds Pages to a SCREECHING HALT for 30 sec.. Maxing out my 1.6 PPC G5.
Same response, feature unavailable.
Is it surprising ? Definitely NO.
The tables are in fact using a quite clone of the one used in Numbers. So, it's a version 1. It's quite normal that we don't find some features available in a program existing since 1991.
Wow. Apple really needs to work on optimizing this thing to work with larger docs if they want to compete with Word.
If you really want that someone read your messages in AppleLand, you used the wrong channel.
Here we are end users trying to help end users.
To be read by an Apple employee you must use the channel dedicated to this purpose:
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE dimanche 22 juin 2008 20:59:30)
1.6gHz Cheese Grater (G5 tower) Mac OS X (10.5)
Report this post
John Boyarsky
Posts: 56
From: Alaska
Registered: 13 déc. 2001
New! Re: Resizing multiple tables
Posted: 22 juin 2008 19:13 in response to: John Boyarsky
No solution. It's been archived so no one will answer. I never figgered this one out, so I'll wait till I need it next School Year & see if I need the info again.
John

closed

Create object type from multiple tables for select statement

Hi there,
I have 3 tables as given below and I wish to create an object type to group selected columns as 'attribute' from multiple tables.
I need to create 2 input parameters to pass in - 'attribute' and 'attribute value' in PL/SQL and these 2 parameters will be
passing in with 'column name' and 'column value'. e.g. 'configuration' - the column name, 'eval' - the column value.
Then, the PL/SQL will execute the select statement with the column and column value provided to output the record.
Pls advise and thank you.
table ccitemnumber
name                           null     type
ccitemnumber                   not null varchar2(20)
configuration                           varchar2(20)
item_type                               varchar2(30)
table productmodel
productmodelnumber             not null varchar2(6)
description                             varchar2(60)
accesstimems                            number
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
table topmodel
stmodelnumber                  not null varchar2(30)
productfamily                           varchar2(60
formfactor                              varchar2(10)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapacity_uom                   varchar2(20)
object type in database
configuration                           varchar2(20)
item_type                               varchar2(30)
numberofheads                           varchar2(2)
generation                              varchar2(10)
numberofdiscs                           varchar2(2)
factoryapplication                      varchar2(150)
modelheight                             varchar2(10)
formattedcapacity                       number
formattedcapac

user12043838 wrote:
Reason to do this as these fields are required to be grouped together as they are created in different tables. They are treated as 'attribute' (consists of many columns) of the part number. So, the PL/SQL is requested to design in a way able for user to pass in the column name and column value or part number, then the select statement should be able to query for the records. Another reason is a new column can be added easily without keep modifying those effected programs. Reuseable too.This basically equates to ... hard to code, hard to maintain, and poor performance.
Are you really sure you want to do this? This isn't going to be easy-street as you seem to think it is, but it's a one way street to a poorly performing system with security vulnerabilities (google SQL Injection).
I would highly recommend you reconsider your design decision here.

1 trigger on multiple tables

I am new to triggers (never coded one) and need to create a trigger (prefer 1) on multiple tables. Basically when the trigger is run I need to capture info from whichever table is being triggered and insert a row into a history table.
Thanks in advance.

It is better to use the OUTPUT clause if that is feasible in your application:
http://www.sqlusa.com/bestpractices2005/auditwithoutput/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Program to produce multiplication table

Similar Messages

Maybe you are looking for