Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

Hello all,
We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
Thanks in advance,

Hi Kiran,
Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
Try to create one record in remote data source  and load it again. It may be find the latest status.
Thanks,
Chandra

Similar Messages

  • Last Data Update Info field not showing in Web Template

    Last Data Update Info field does not show up in the Web Template. This Web Template is for a MultiProvider on top a single cube.
    Greatly appreciate if anyone has any insight into this issue.

    Hi Suma,
    if other queries work fine using exactly the same (customized) template the problem is most likely not the template. Does the appropriate query does display figures? Is your data binding done correctly within the template?
    What happens if you execute the customized template which does not display Last Data Update Info field with another (i.e. a different) query? Does it display the Last Data field? What happens the other way round: you execute a different template with the appropriate query (which does not display Last Data Update). Does it show the Last Data Update?
    Just give it a try, this sometimes help
    Brgds,
    Marcel

  • Last Data Update in Visual Composer and Web App Designer

    Hello,
    We want to show the last data update in query result and we used 2
    differents ways to do it: throught Web Application Designer (SP 12) and
    Visual Composer (SP 10).
    In query result of Web Application Designer, the last data update came
    in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
    This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
    Why does the difference exist between: Web App Designer and Visual Composer for last data update?
    So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
    Best Regards,
    Pablo Moraes

    Hi Mario,
    Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
    Regards,
    Pablo Moraes

  • Use of virtual cube 0FIGL_V10 for reporting on Financal Statements

    Dear all,
    I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
    On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
    I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
    My questions are:
    - to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
    If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
    For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
    - to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
    Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
    Thanks in advance for the help!

    Hi Sundar,
    As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
    Hope it helps..
    ***Assign Points***
    Thanks,
    Gattu

  • On which object the "Last data update" is calculated when a query is built

    Can anybody tell me that the information "Last Data Update" (in a  query output) comes from which object ? I want to know the technical details .
    I know that if a query is built on a Multiprovider, then the "Last Data Update" will show the least loaded request date among the Infoproviders. But I want to know which object keeps this information.

    Hi Papiya,
    I think it is related to text elements SYUSEIT and also to 0REQID.
    -Pradnya

  • BO Advance analysis 1.1.4,  Info Field like Last Data Update Table

    Hi Experts,
    I am using BO Advance analysis 1.1.4 for reporting output. There we have option to show Info Field like Last Data Update.
    It is using this function to get that info :
    =SAPGetSourceInfo("DS_1", "LastDataUpdate")
    Anybody have idea what BW table it is refering to get that info.
    As per my understanding, since these workbook of Adv. Analysis are refering Query which are built on MultiProviders, it go and find out the last cube/dso successful data load.
    Also I manually checked the date and time of last successful update in cube, but it is not matching as far as time is concern. Date is matching.
    Please help me to get the correct table which gave that info (date and time).
    Thank-You.
    Regards,
    Vinod

    Hi Tammy,
    I was trying for the similar requirement to get the "Last refreshed time" of the table used in the calculation  view  in HANA.
    It uses the same formula : =SAPGetInfoLabel("LastDataUpdate")
    But since Analytic View actually doesn't store any data, it is virtual. The date am seeing is the last changed date. i.e if i do any changes on the model, am seeing the last date when I changed it.
    Is there any function which we can use to get the Last refreshed date of the table in the model am using?
    Regards,
    Krishna Tangudu

  • Last data update

    Hi,
    How I can find the last data update information(date and time) of multiprovider in BW?
    Kindly help on this.
    Regards
    Mukul Singhal

    Let me explain how the "last data update" works.
    If the query is based on one cube or DSO, it is the time of the last request upload.
    If the query is based on a multiprovider, like the example given ealier,
    assume there are three cubes in multiprovider : 
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Last udpate of cube3 is 11/20/2008.
    The "last data update" will be the earliest day of the "last data update"s of all partproviders, i.e.11/17/2008.
    Because the meaning of "last data update" is that, data (of all partproviders) has been already updated until this time.
    Now we assume there are three cubes like this in multiprovider :
    Last update of cube1 is 11/17/2008
    Last update of cube2 is 11/19/2008
    Cube3 is empty. It has never been loaded with any request.
    Then the "last data update" will be empty. Because until no time has all partproviders been updated. This is the design of the system.
    Regards,
    Patricia

  • How to hide the Last date Update in the Excution of a report

    Dear All,
    When we execute a query in EP, the Out Result will contain the following Options
    1) Save As
    2) Open
    3) Export Excel
    4) Information
    5 ) Comments
    6) Filters
    7) Settings
    8) Last data update
    Can anyone plese tell me how to give the authorisation in BI for the above options.so that we can give restrictions for some users.
    hope everything is crear.
    Please give me the hint atleast

    You also have to test the value:
    REPORT ztest MESSAGE-ID 00.
    DATA: BEGIN OF itab OCCURS 0,
            f1 TYPE i,
            f2 TYPE i,
            f3 TYPE i,
            f4 TYPE i,
          END OF itab.
    DATA: sel_field(20),
          value TYPE i.
    DO 5 TIMES.
      itab-f1 = sy-index.
      itab-f2 = sy-index + 10.
      itab-f3 = sy-index + 20.
      itab-f4 = sy-index + 30.
      APPEND itab.
    ENDDO.
    LOOP AT itab.
      WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
      HIDE itab.
      CLEAR itab.
    ENDLOOP.
    AT LINE-SELECTION.
      CLEAR: sel_field,
             value.
      GET CURSOR FIELD sel_field.
      IF sy-subrc = 0.
        CASE sel_field.
          WHEN 'ITAB-F1'.
            value = itab-f1.
          WHEN 'ITAB-F2'.
            value = itab-f2.
          WHEN 'ITAB-F3'.
            value = itab-f3.
          WHEN 'ITAB-F4'.
            value = itab-f4.
        ENDCASE.
        MESSAGE s001 WITH 'Value of' sel_field 'is' value.
      ELSE.
        MESSAGE s001 WITH 'Invalid field selected'.
      ENDIF.
    Rob

  • Query on virtual cube showing incorrect values

    Experts,
    I have create a virtual cube on a base cube using services (info-source). both virtual as well base cube are z-development and are in BI.
    Base cube has 6 records, now when I check data in virtual cube using display data it shows correct values based on routine written in virtual cube transformation.
    Problem is when I created query on this virtual cube it doesnt show correct data or sometime no applicable data. After debugging I found, in end routine itself result package contains records with blank values in it on which I have written routine. But it does this only while executing query not when I display data in cube.
    Regards,
    Akshay

    Hi!!!
    And how do you solved it?

  • Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

    Hi All,
    I am using 0FIGL_V10 in a multiprovider with 0FIGL_O02 to solve a reporting requirment.
    My problem is that I am unable to get the same revenue figure from the multiprovider as I am from the virtual cube alone.
    In the multiprovider query I have filtered my revenue KYF's by:
    value type
    version
    currency type
    I have fiscal period across the top of the columns and filtered for example to 001.2009 - 006.2009
    This query returns double the revenue value that I get if I run an indentical query on the base cube 0FIGL_V10. 
    I have found that if i filter fiscal period directly in the KYF restriction it outputs the correct result which is confusing.
    Any ideas ? 
    help much appreciated.
    Mark

    Hi ..
    Thanks for the suggestion but this note has already been implemented into our system.
    Any other thoughts ?
    thanks and regards
    Mark

  • Query to find the difference between the last date and the second to the last date

    Hi all,
    Hope all is well.
    I am working on the following problem because I am trying to improve my MS SQL skills. But I am stuck at the moment and I wonder if you could provide some assistance please. Here is the issue:
    Table 1: Dividends
    divId
    ExDate
    RecordDate
    PayDate
    Amount
    Yield
    symId
    1
    2013-02-19
    2013-02-21
    2013-03-14
    0.23
    0.00000
    3930
    2
    2012-11-13
    2012-11-15
    2012-12-13
    0.23
    0.00849
    3930
    3
    2012-08-14
    2012-08-16
    2012-09-13
    0.20
    0.00664
    3930
    4
    2012-05-15
    2012-05-17
    2012-06-14
    0.20
    0.00662
    3930
    5
    2012-02-14
    2012-02-16
    2012-03-08
    0.20
    0.00661
    3930
    6
    2011-11-15
    2011-11-17
    2011-12-08
    0.20
    0.00748
    3930
    7
    2011-08-16
    2011-08-18
    2011-09-08
    0.16
    0.00631
    3930
    8
    2011-05-17
    2011-05-19
    2011-06-09
    0.16
    0.00653
    3930
    9
    2011-02-15
    2011-02-17
    2011-03-10
    0.16
    0.00594
    3930
    10
    2010-11-16
    2010-11-18
    2010-12-09
    0.16
    0.00620
    3930
    11
    2010-08-17
    2010-08-19
    2010-09-09
    0.13
    0.00526
    3930
    12
    2010-05-18
    2010-05-20
    2010-06-10
    0.13
    0.00455
    3930
    13
    2010-02-16
    2010-02-18
    2010-03-11
    0.13
    0.00459
    3930
    Table 2: Tickers
    symId
    Symbol
    Name
    Sector
    Industry
    1
    A
    Agilent Technologies Inc.
    Technology
    Scientific & Technical Instruments
    2
    AA
    Alcoa, Inc.
    Basic Materials
    Aluminum
    3
    AACC
    Asset Acceptance Capital Corp.
    Financial
    Credit Services
    4
    AADR
    WCM/BNY Mellon Focused Growth ADR ETF
    Financial
    Exchange Traded Fund
    5
    AAIT
    iShares MSCI AC Asia Information Tech
    Financial
    Exchange Traded Fund
    6
    AAME
    Atlantic American Corp.
    Financial
    Life Insurance
    7
    AAN
    Aaron's, Inc.
    Services
    Rental & Leasing Services
    8
    AAON
    AAON Inc.
    Industrial Goods
    General Building Materials
    9
    AAP
    Advance Auto Parts Inc.
    Services
    Auto Parts Stores
    10
    AAPL
    Apple Inc.
    Technology
    Personal Computers
    11
    AAT
    American Assets Trust, Inc.
    Financial
    REIT - Office
    12
    AAU
    Almaden Minerals Ltd.
    Basic Materials
    Industrial Metals & Minerals
    I am trying to check the last date (i.e. max date) and also check the penultimate date (i.e. the second to the last date).  And then find the difference between the two (i.e. last date minus penultimate
    date).
    I would like to do that for each of the companies listed in Table 2: Tickers.  I am able to do it for just one company (MSFT) using the queries below:
    SELECT
    [First] = MIN(ExDate),
    [Last] = MAX(ExDate),
    [Diff] = DATEDIFF(DAY, MIN(ExDate), MAX(ExDate))
    FROM (
    SELECT TOP 2 Dividends.ExDate
    FROM Dividends, Tickers
    WHERE Dividends.symId=Tickers.symId
    AND Tickers.Symbol='MSFT'
    ORDER BY ExDate DESC
    ) AS X
    Outputs the following result:
    First
    Last
    Diff
    2012-11-13
    2013-02-19
    98
    But what I would like instead is to be able to output something like this:
    Symbol
    First
    Last
    Diff
    MSFT
    2012-11-13
    2013-02-19
    98
    AAN
    2012-11-13
    2012-12-14
    1
    X
    2012-11-13
    2012-12-14
    1
    Can anyone please let me know what do I need to add on my query in order to achieve the desired output?
    Any help would be greatly appreciated.
    Thanks in advance. 

    Could you try this?
    create table Ticker (SymbolId int identity primary key, Symbol varchar(4))
    insert into Ticker (Symbol) values ('MSFT'), ('ORCL'), ('GOOG')
    create table Dividend (DividendId int identity, SymbolId int constraint FK_Dividend foreign key references Ticker(SymbolId), ExDate datetime, Amount decimal(18,4))
    insert into Dividend (SymbolId, ExDate, Amount) values
    (1, '2012-10-1', 10),
    (1, '2012-10-3', 1),
    (1, '2012-10-7', 7),
    (1, '2012-10-12', 2),
    (1, '2012-10-23', 8),
    (1, '2012-10-30', 5),
    (2, '2012-10-1', 10),
    (2, '2012-10-6', 1),
    (2, '2012-10-29', 7),
    (3, '2012-10-1', 22),
    (3, '2012-10-3', 21),
    (3, '2012-10-7', 3),
    (3, '2012-10-12', 9)
    WITH cte
    AS (SELECT t.Symbol,
    d.ExDate,
    d.Amount,
    ROW_NUMBER()
    OVER (
    partition BY Symbol
    ORDER BY ExDate DESC) AS rownum
    FROM Ticker AS t
    INNER JOIN Dividend AS d
    ON t.SymbolId = d.SymbolId),
    ctedate
    AS (SELECT Symbol,
    [1] AS maxdate,
    [2] AS penultimatedate
    FROM cte
    PIVOT( MIN(ExDate)
    FOR RowNum IN ([1],
    [2]) ) AS pvtquery),
    cteamount
    AS (SELECT Symbol,
    [1] AS maxdateamount,
    [2] AS penultimatedateamount
    FROM cte
    PIVOT( MIN(Amount)
    FOR RowNum IN ([1],
    [2]) ) AS pvtquery)
    SELECT d.Symbol,
    MIN(MaxDate) AS maxdate,
    MIN(penultimatedate) AS penultimatedate,
    DATEDIFF(d, MIN(penultimatedate), MIN(MaxDate)) AS numberofdays,
    MIN(MaxDateAmount) AS maxdateamount,
    MIN(penultimatedateAmount) AS penultimatedateamount,
    MIN(MaxDateAmount) - MIN(penultimatedateAmount) AS delta
    FROM ctedate AS d
    INNER JOIN cteamount AS a
    ON d.Symbol = a.symbol
    GROUP BY d.Symbol
    ORDER BY d.Symbol
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers.
    Thanks!
    Aalam | Blog (http://aalamrangi.wordpress.com)

  • App Store keeps showing out-of-date updates

    This began since the last OS update - I install the available app updates, and then the App Store app on my phone shows a list of more available updates, but it's showing versions previous to the latest installed versions.
    iPhone 3G, OS v2.2.1.

    I was having this problem, too, but I hope I've fixed it. First, in iTunes, check out your Applications. Use the Show in Finder command to see if the downloaded apps folder has any duplicates.
    If your apps look good, try the following:
    1. Make sure your iPhone is disconnected. Restart your iPhone and do NOT open the App Store app until the end of this procedure.
    2. In iTunes on your computer, go to Preferences - Devices. Check Disable automatic syncing for iPhones and iPods. Click ok.
    3. Go back to Preferences - Devices, and Reset Sync History.
    4. Deauthorize Computer from the Store menu.
    5. Quit and restart iTunes.
    6. Authorize Computer from the Store menu.
    7. Repeat step #3.
    8. Within iTunes, check for updates to your apps.
    9. Connect your iPhone and wait for it to appear in the iTunes sidebar.
    10. Make sure your sync preferences are how you like them, especially for the Applications tab.
    11. Sync your iPhone.
    Hope this helps!

  • Issue when running  Balance sheet report  on Virtual Cube (0FIGL_V10)

    Hi ,
    We are actually implementing new General ledger and I activated all the underlying ODS & cubes.
    While running standard report(0FIGL_V10_Q0001) on 0FIGL_V10 , I am getting the following error:
    Characteristic 0GLACCEXT has a constant value (F) and cannot be used.
    Characteristic 0GLACCEXT Financial Statement Item not available in the Infoprovider.
    FYI, The above characteristic is available in the cube and I dont know what is the fix for the same.
    Can anyone please let me know if the same problem was faced and resolved.
    Regards,
    Kumar

    Hi Sumit,
    Thanks for the response.I did following checks in RSRV yesterday before I posted this thread.
    Master data checks for 0GLACCEXT went successful but when I checked my Infocube and dimension tables,its giving me the following error:
    Diagnosis
    There is no dimension table for dimension /BI0/D0FIGL_V102, even though the dimension is not a line-item dimension.
    Procedure
    Try to reactivate the InfoCube. Data that is contained in the InfoCube is not deleted.
    As per the above procedure , I reactivated the cube and tried running the query but it still gives the message,0GLACCEXT characteristic cannot be used.
    I can see all the dimensions in the Infocube(0FIGL_V10) coming correctly and I also can reactivate but still the error doesn't go.
    I also tried installing the Cube one more time if the error was because of not installing properly and I tried running the report but still I did not get to a resolution..
    I am now not sure , what to do to fix this problem.
    Regards,
    Kumar

  • Can EBS show the last date and time of a user login

    We have a requirement to display users their Last sucessfull login date and time. We would like to display after user have entered username/pwd i.e. Could someone guide how can we schive this ?
    Thanks in Advance
    Dinesh

    Hi,
    This is available through "Signon Audit Unsuccessful Logins" concurrent program.
    How do you audit an Oracle Applications' user? [ID 395849.1]
    Need A Way To Notify Users About Previous Failed Login Attempts [ID 357009.1]
    Thanks,
    Hussein

  • How to change the settings for Last data update in BI

    Dear All,
    If you want to display that "Status of Data " field in the report... Then you need to set it at...
    Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
    If this is not set, then it will not show in report output.
    Status of data is the time on which the latest load occured to the cube. Lets say, you have built a report on a cube which is loaded on 01/10/2007. When you run the report, the status of data will show this date 01/10/2007 until you load the cube again. In this case, if you load on 01/20/2007, the status would now show up as 01/20/2007.
    If we want to display that field in the report...
    Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
    The above all is for BW 3.5
    but i want to know for BI 7 and EP
    Regards
    venu

    Hi,
    First thing here is, in SM58 u r finding the entries means those are related to TRFC LUW's. we shuld never stop this unless those are not useful.
    These TRFC's moves from the source system to different Target systems by their respective users.
    As u said that these Entries are occupying the system resources i.e in accordance to that we have to increase our dialog process in the system not to simply stop that TRFC entries.
    These trfc's move basing on the Dialog processes in the system i.e if the processes are free then these entries move freely from system to system.
    Automatically system generates these LUW's when ur scheduling a load from R/3 to BI system.
    This will not be generated to BI by a particular job in R/3.This depends on the volume of the data only.
    So pls have a talk with BASIS team regarding the resource availability and the movement of the LUW's/TRFC's into BI system.
    rgds,
    Edited by: Krishna Rao on Jun 25, 2009 1:38 PM

Maybe you are looking for