Re: Consignment material qty with value
Hi All,
How can i see the consignment list with customer qty with value.
When I can find list pumps quantity and value on Consigments ?
I use transaction MB 58 but I have only what they have on stock ( but
without value )
Thanks & Regards
Siva
>
sivakumar Annamalai Shanmugam wrote:
> Hi All,
>
> How can i see the consignment list with customer qty with value.
>
> When I can find list pumps quantity and value on Consigments ?
>
> I use transaction MB 58 but I have only what they have on stock ( but
> without value )
>
> Thanks & Regards
> Siva
Have you checked MB5B/MB51 with special stock indicator?
Regards,
Indranil
Similar Messages
-
Linking Consignment Settlement (MRKO) with Value Contract
Hi Guys,
We are trying to set up Consignment stock functionality in our company. We have successfully configured and tested it but there is only one problem, we want to link this consignment functionality with and Outline agreement (Value Contract to be exact), so that every time we do a settlement using MRKO, the invoice value is deducted from the total value of the contract. My first question is
1 - Can we link consignment settlement (MRKO) and Value Contract in such a way that each time we run consignment settlement using MRKO , the open/ remaining value of the Value Contract is decreased by the invoice amount. If YES, then how can we do it (Please mention the steps if possible)
2- If NO, then what is the way to achieve above task, is their workaround for it ??Normally we do not get into consignment arrangements with supplier with value limites or qty limites. It defeats the purpose of consignment, where idea is to reduce inventory carrying cost and yet have full availability of stock.
Also, you will provide a dedicated space in your premises to your Supplier and hence to limit him with total value of your consumption is difficult to achieve. Even if you make some enhancement in system to achieve it, on shop floor how can you control it, if you have inventory open for use? If you have negotiated with consignment vendor based on value, I am sure Vendor will not replenish any inventory once he thinks that overall value limit is breached and hence suddenly one day, without any indicators to you, you will run out of those components which you do not have in your inventory, nor in your consignment inventory.
You can implement any exit, which may stop you post the transaction in system, but I believe if you are entering into such contracts with your supplier, you may need to have some sort of notification once you are close approaching the overall limit, to either re-negotiate the contract or to have those components ordered for your inventory directly to ensure availability of stock.
Regards,
Dakshesh -
Best way to pre-populate material variable with values for users
Hi, I have a requirement to prepopulate a material variable with about 5 materials and that is the materials that will default when the query is called. The users would also need the ability to change those values.
My thought is to create a User-exit variable that derives the values from a user maintained table (infoobject).
Does anyone else have any suggestions or ideas on the best way to handle this?I don't know if there is a best solution...
Infoobject
With this option you have to create a new infoobject (ZMATERIAL) without attribute (you need only a list material codes) and then to set the authorization profile for the user in order to manage the content.
The creation of an infoobject corresponds to a table creation, but you don't need any other specific options that belong to the infooject (as technical object)...
Table
With this option you have to create a Z table with only one field and then to allow the maintenance of the table by SM30....
In the ending, if you want to be a purist use the table, otherwise use an infoobject (but there are no significant differences !
Bye,
Roberto -
Batch wise stock report with qty and value as on date
is there any report so that we can see the stock qty with value as on date,
i have tried mb5b but it is showing only qty and batch combination not qty value and batch combination
plz suggest me, it is very urgent.
nitinMBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
There is no table in SAP that holds the stock information on daily basis.
You have to develope this yourself. Easiest method by copying a table like MBEW and MARD daily to a Z-Table.
A stock situation at a certain date can be calculated with MB5B.
Edited by: Jürgen L. on Aug 5, 2008 4:06 PM -
Inventory Audit Report - Zero quantity but with value
Hi All,
Our client are using FIFO costing, due to some backdated transaction we get 0 Qty but the value is not 0 when running Inventory Audit Report base on posting date (system date is fine) at the month end. I understand that the system calculate the cost base on system date and this is system behavior.
So, i just wanted to seek for advice from any expert in accounting especially on costing, will this 0 Qty with value report be accepted by auditor and will it caused any legal issue or this accounting practice is acceptable?
Thanks.Dear Mr Kong,
From what you said it looks like opening a message for this issue is the appropriate action this time.
The stock group will give you an update on this issue.
Kind Regards,
Marcella Rivi
SAP Business One Forums Team -
hi all
Raw material qty. is zero in mmbe,mc.9 & material master plant stock .But it shows -ve value in material master & MC.9
Whyvalue is -ve?Dear,
Same Problem i am also facing when i am exexuting MC.9, for ZERO Stock its showing val.valuated Stock
+ve for some material and -ve for some materials.
when i raised a OSS msg to SAP they are telling this id due some of the Info structure tables were not updated i.e S031,s032 and s033 (use Se16 give ur material for these table u wil come to know)
they have give some note to statistical build but my invoice documents are very old i.e 2001 and 2002 Fiscal year.
my advice just raise a OSS msg to SAP.
other check ur data again by executing the T.code MC.9 under valaution sub tab instead od standard please select current price.
Please gothrough these notes if at all useful79083,64636.
180952 Negative stock values in Inventory Controlling (MOST RELAVENT)
487674 Negative consumption value after cancellation movements
358284 No values for negative stocks
672183 'Value stock with receipt' is incorrect
416791 Standard analyses: Error with rounding differences
453420 Incorrect stock values in LIS
Please help me if you get any soluation
regards
venu gopal
Edited by: venu kk on Jun 2, 2008 9:15 AM -
Material type - maintainance by qty and value
Dear All Guru,
Yesterday I had copied the plant from the plant belong to same company and maintained the same val Gr Code.
But i found that I am not able to make GR posting and the error was Plant and material type is not matching and then over SDN i got the soln to maintain qty and value for matl type and it resolved the problem.
but can anybody tell me that why this can happen ?
b'coz still if the val/qty ticks are not maintained why system is showing the material type and plant combination error...though it can consider this as UNBW material and can still post the GR
also can you suggest the right method for coping the plant so i won't face problem like this or any check methods after coping new plant
Regards,
VimleshHi,
For Preparation of New Plant, following steps to be adopted.
1. Excute the India Specific Localize Sample Organizational Units using SPRO> Enterprise Structure> Localize Sample Organizational Units.
In this IMG activity, you localize the sample organizational units by applying the appropriate country template like India to them.
2. Then, in the next IMG activities (under Enterprise Structure Definition and Assignment), you copy these localized organizational units to create units of your own.
Caution:
Only execute this IMG activity if you have not changed any Customizing settings in SAP R/3.
Do not execute this IMG activity in your production client, as it will overwrite the settings for any organizational units named 0001. Run it only in your production preparation client from where you will transport to Prodution Client.
Note: Unless you adopt this procedure to create the new plant, till then you will encounter the same Error which you are facing.so these are the guide line for create of new/Additional country specific Organizational Units.
hope it helps...
manoj singh -
Select statement to extract the material description with asterick values
Hi All,
My requirement is to get the list of materials which have description with asterick symbol.
for example : materail1 has description - Oil 3p * Gas 22'.
This material contains * in the description .Ineed to get list of materials from Makt with asterick.
I have written like this
s_makt-sign = 'E'.
s_makt-option = 'CP'.
s_makt-low = '%'.
*s_makt-high = ".
append s_makt.
SELECT matnr maktx FROM makt INTO TABLE t_makt where maktx IN s_makt.
but it is extarcting all the materials in MAKT.
Can anyone suggest me how to write that?I'd try something like below....don't try to get too fancy.
select * from makt into it_makt where spras eq sy-langu...
loop at it_makt assigning <fs> .
If <fs>-MAKTX (or MAKTG) cs lc_asterisk. "constant described as char1 with value '*'.
else.
delete it_makt.
endif.
endloop. -
Report for Qty Receipt values ( O.K qty only )
Hi experts,
I received 100 qty , Value Rs.100 thru tcode MIGO, movt type 101. But later on out of 100 qty, 50 qty got rejected thru tcode QA32. The value appearing in MB51 report is Rs. 100.
Is there any report in standard SAP where value for O.K qty i.e Rs. 50 can only be shown ?
Please let me know. Useful suggestions / solutions will be highly & promptly rewarded.
Regards,
( Rajneesh Gulati )Dear,
You can use MB51.
Enter t-code MB51, enter your material code and click on execute button.
System display you list of entry for material transaction.
System display you one document for good receipt with 100 qty.
Then display other document for reject material document with 50 qty.
So actual result is 50 qty for material.
Regards,
Mahesh Wagh. -
ECC 600 - Cost Estimates for Consigned Material
We are in ECC 600and planning to implement Consigned Inventory in short time. However I am stuck with Inventory revaluation for consigned material.
Consingment Flow: Vendor ship these items against standard PO at zero price. At the consumption pricing is captured from Purchase info records.
Material valuation: We are using valuation variant 001 Planned valuation - mat. with
<b> Primary Strategy Sequence </b>
Planned Price 1
Valuation Price 1 Based On Co
Price from Purchasing Info Re
Sub-Strategy Sequence with Purchasing : Strategy Sequence
Purchase Order Price via Condition
Gross Purchase Order Price
Effective Price from Purchase Order
However when I try create cost estimate I am getting following error,
" No price could be determined for material/batch <......>/ plant <..> "
Any suggestions.
Thanks
UdayThanks for the quick response. I did maintain Purchasing info record using ME12. We do see pricing information at the time Production order backflsh. However contract and PO has no pricing information. Therefore initial GR is created with zero price. However at the time consumption against prod order, consignment material gets price from the Purchase info record. Bur consumption documents are not linked back to PO.When I try to cost these material using CK11N, SAP gives following messages,
Msg.typ Material Plnt Area MsgNo Message Text
I 1000 CK 037 Lot size 1 EA taken from costing view
I 1000 CK 776 No valid source of supply found for material plant 1000
E 1000 CK 465 No price could be determined for material/batch / plant 1000
I 1000 CK 361 Value of costing item 00001 in itemization is 0
E 1000 CK 240 Cost component split costed with value of zero
Any clue.
Thanks,
uday -
Consignment and non consignment material
Hi All,
I need to understand and need help on below situation
I have Material A with below scenarios
Supplier 1 supplies it on Consignment
Supplier 2 supplies it on Non-Consignment
Is it possible to have this scenario,can we setup in this way
Thanks in Advance
Regards,
BaluHi,
Supplier 1 supplies it on Consignment
Consigment means vendor material lying in your premises and ownership is of vendor and how much you use you have to pay.
For Consigment, In material master maintain in MRP2,
special procurement - 10
then create info record in ME11. and maintain delivery days.
Go to create PO with Item K .....
When you receive material by MIGO with Movement type 101 K. it does not create any Accounting Document becasuse this stock is not in your inventory but it is still vender stock lying in your premises.
now transfer stock(MB1B) to your stock for consumption with movement type 411 K then it will create a Accounting document.
and pay the vender once or separte with MRKO while maintain CONS in MRM1.
remember one thing more in MRM1 with KONS must miantain Communication as printer check box ticked.
Now, In consumption, system picks the rate for material as you maintinted in ME11 for a particular time period.
Supplier 2 supplies it on Non-Consignment
Means Normal PO......
maintain inforecord or not.
if you want that PO created at the time of GR then you have to maintain inforecord standard.
the cycle for automatic PO at time of GR
1. Check the Auto PO option in VMR & MMR in Purchasing view.
2. Maintain Purchase Info Record with Standard Purchase Organisation.
3. Maintain the Source list.
4. Define the default Values for Document type as "NB" for TC: MB01 - Menu Path:SPRO-IMG-MM-Purchasing-Define the default Values for Document type
5. Maintained creation of automatic PO during good receipt for mov type 101 and 161.
Menu path : MM -> Inventory Management -> Goods Receipt -> Create Purchase order Automatically -> Activate Auto PO creation for Mvt type 101 and 161.
6. Maintain the Vendor field as mandatory for Mov type 101 and 161.
7. Do the GR with TC MB01and Mov type 101 and post. In display Mat doc with TC MIGO, u will find the PO which was created automatically in Back ground.
Regards,
Pardeep malik -
MB51 and BW Material Inventory 0IC_C03_Q0006 values do not match
Hello BW experts,
We recently implemented the standard material inventory extractors to our BW system. When I compare the values between MB51 and 0IC_C03_Q0006, the quantities are the same but the values are different.
For a particular material/plant, I exported MB51 to excel and did a sum on "Qty in Un. of Entry" and "Amount in LC"
qty: 2104 Value: 8073.51
Here's what the query looks like in Bex Analyzer for the same material/plant:
Is ValStockValue not the same as Amount in LC? If not, what should I be using to make sure ECC and BW are matching up?
Thank you for your help,
SusanHi Susan,
For Closing Stock quantity use 0TOTALSTCK which is Ncum value of in flow (0RECTOTSTCK)and out flow (0ISSTOTSTCK). For that your values are matching.
And for Closing Stock Value use 0VALSTCKVAL which is Ncum value of in flow (0RECVS_VAL)and out flow (0ISSVS_VAL).
In case if you need to calculate opening stock quantity & value use below formulas:
Opening stock quantity = Closing(0TOTALSTCK) + Issued(0ISSTOTSTCK) - Receipt(0RECTOTSTCK)
Opening stock value = Closing(0VALSTCKVAL) + Issued(0ISSVS_VAL) - Receipt(0RECVS_VAL)
Also use can use MC.9 with MB5B for matching data.
Regards,
Abdullah -
Cogi error - Pipeline/consignment movement posted without value
Hi
I am getting a Cogi error Pipeline/consignment movement posted without value
This particular material was not having problem till last week and now all the time when confirmation of production order happens it goes to cogi with error
Price is maintained in info record
Please suggestDear friend,
some theory:
You always have 2 options - delete or process your COGI record.
Before to make a decision you need to analyse/find a reason why this error has happened.
run COGI;
tick your eror;
hit F6 (display errors) - bell icon
now you are able to see the reason.
depends on a reason (information you see now) you do your next steps
say, for instance, you did something to fix the reason,...
then
if you want to process, tick your error and Save
if everything is okay - system will POST it (cogi record will go away)
or , say, you do not care about the error -
tick your error and Delete
some practice:
please have a look at your material - probably someone changed it very recently - look at last changes using MM04 or MM03
good luck -
Account Assignment - Qty and Value Update
Hi,
I need to have value and qty update for a a/c assignment po's.. ie in po i'm using a/c assignment as A, and in gr i need to have qty and value update . how to do?? is it possible? i knew that that a/c assingment won't generate qty update for a/c assignment catergores... is any way to create qty update for a/c assignmnt cateroires (K-cost center,A-Asset)Hi,
when you are creating a PO with account assignments menas , the costs of this product need to get posted to the account assignment , and the material is being procured for consumption ( not for stock) to this account assignment.
But however , qty and value updates depends upon the material type of the material.When you use a stocked material type material is used for the PO, change the account assignment definition as said in above posting.
Chek the material type of the material you used for the PO to your error message.
Regards, -
Report for Comparison of Material Qty
Hi All,
I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
Thanks & regards,
Ravi STo get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps.
Maybe you are looking for
-
Dynamic sub-topic slide counter in Captivate 7
Hi, I was wondering if anyone could give me guidance on the following routine that i would like to implement using Captivate 7. I would like a front-end menu selector slide to dynamically count how many slides are allocated to each of the sub-topics
-
Hi, This is my configuration : Linux Mandrake 8.0 & Oracle 9i. My problem occurs when i run "./runInstaller". Nothing happens, no error. I have 3 directories Disk1, Disk2 & Disk3 in /TEMP/ (just my example). I created " groupadd dba " ... and a user
-
Mail not sending for ONLY MacBooks
Here is a strange one. Mac OSX Snow Leopard Server. Apple Mail app on clients. Desktops, iPhone, iPad can send and reveive email from outside the network. MacBooks cannot send and reveive email from outside the network. All thoughts v
-
I'm wondering if there's a way to change the background color of the area behind the stage. On my monitor, it's a little hard to tell the difference between the white and light gray. Thanks.
-
Hi, I try to set the external column, but I get error: Application error when access /_layouts/15/Picker.aspx, Error=Value cannot be null. Parameter name: typeName at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)