Rights to Inventory Custom Reports
Hi
On our ZCM zone (recently upgraded to ZCM 11.2.1) only the "Administrator" can view Inventory Custom Reports. All other admins (including superadmins) see nothing in the Inventory Custom Reports list. If they create a new report the name is accepted but never shows. If another attempt is made it states "folder already exists".
I have given full access to all custom reports with the following but still they never show in ZCC for superadmins (browsers: ie8, ie9, firefox 10.0.5)
ZCC->Configuration->Click the adminuser -> rights tab -> assign rights through "Inventory Report Rights" in the left pane under "Administrator Tasks"
I have also added the specific "Reporting Rights" for the adminusers to the Reports folder but the result is the same. They should not need the reporting rights anyway as they are superadmins.
Any suggestions on how to make this work?
Thanks
Julian
Originally Posted by danielsjogren
I have the same issue. New users can't see Custom reports.
Even if I give them full rights to all custom reports and standard reports, they won't see them.
The only way for them to see the standard reports is to be a super admin.
/Daniel
I vaguely remember running into this. No, you don't need to give them super admin, but you have to do something odd/funky. It was supposed to have been fixed in 11.2 and it wasn't. I vaguely remember it was TID #7007898
We had 2 issues with that.
1) if you didn't get rid of the .xml file it would generate errors/exceptions (at least if you're using Oracle), so it wouldn't actually run/do what it was supposed to do (that's the bug/defect that was supposedly fixed)
2) Try running it manually with the zman rpfs instead
I think that fixed it for us.
We have non-super admin users who can see custom reports that one of our other non-super admins has created.
Similar Messages
-
What happened to Effort metrics in the Custom Reports data model?
What happened to Effort metrics in the Custom Reports data model?
Is there any way to use the Custom Reports data model to report on task effort? This was a metric captured in the Standard Reports Data Package, but looking through the metrics in the Custom Reports data model (particularly the ServiceTask Fact table) I do not see any effort related metric.Ed is right. The Custom Report data model on pre-2007.1.1 did not contain task effort data but it is added as a fact to report against in the 2007.1.1 release. You will get this once you upgrade to 2007.1.1 and turn on the task effort entry setting in site administration.
-
Cisco Prime - Custom Inventory Change Report?
Hi,
Cisco Prime has this report:
Reports > Inventory > 24-hour Inventory Change
The problem is that the Report reports things that I don't want to track, like changes in "NVRAM Used", Interface Speed, etc...
Is it possible to configure Inventory Change so that it would not check some itens?
Thanks.Thanks for answering,
my report has, for example, the following information:
Changes for Device: router01
Processor Identity: ProcessorID = 3
Attribute Type of Change Time Change Detected Previous Value Current Value
NVRAM Used (KB) Changed 2014-02-21 00:10:00.69 16923 16953
I saw that Syslog Automated Actions > Inventory Fetch has very useful configuratios, but I think that it is still not what I need. The screen you pointed out was related to messages from Syslog that triggers inventory collection.
What I need is in the image below.
All right, NVRAM changed it's current used size. For me, it is completely useless to know about that every day in my Inventory Change report. That information is flooding my report. How to remove it from future reports?
Thanks again!
Message was edited by: Leonardo Machado -
Custom Reporting on Imported Hardware Inventory set classes for USB Super Speed driver
I am trying to create a report with report builder 3.0 to pull data on a USB Super Speed driver under
ClassContext("local|HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\Class{36fc9e60-c465-11cf-8056-444553540000}")
I tried following the article
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/11/10/inventorying-and-reporting-network-adapter-driver-details-and-how-to-report-only-the-wireless-type-in-configuration-manager-2012.aspx and changed a few of the Class descriptions and cannot
get any data in the report.
I imported this into the Hardware Inventory set classes:
#pragma namespace ("\\\\.\\root\\cimv2\\sms")
[ SMS_Report (TRUE),
SMS_Group_Name ("USB"),
SMS_Class_ID ("MICROSOFT|USB|1.0"),
Namespace ("\\\\\\\\localhost\\\\root\\\\cimv2") ]
class Win32Reg_USB : SMS_Class_Template
[SMS_Report (TRUE), key ]
string Index;
[SMS_Report (TRUE) ]
string DriverDesc;
[SMS_Report (TRUE) ]
string DriverVersion;
[SMS_Report (TRUE) ]
string DriverDate;
[SMS_Report (TRUE) ]
string ProviderName;
Under the Configuration.mof file I am not sure what to change in order to report on this. Any help appreciated. We are looking for all of the USB super speed driver details.
Thanks,
Brithave you looked at V_GS_system_Device if your device info available or not ? Use the below SQL query to list all system devices on your clients.
SELECT DISTINCT name0 FROM v_GS_SYSTEM_DEVICES
GROUP BY name0
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr -
Custom Report taking more time to complete Normat
Hi All,
Custom report(Aging Report) in oracle is taking more time to complete Normal.
In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete.
We have enabled the trace and checked the trace file, but all the queries are working fine.
Could you please suggest me regarding this issue.
Thanks in advance!!TKPROF: Release 10.1.0.5.0 - Production on Tue Jun 5 10:49:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Sort options: prsela exeela fchela
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00922: missing or invalid option
parse error offset: 1049
EXPLAIN PLAN option disabled.
SELECT DISTINCT OU.ORGANIZATION_ID , OU.BUSINESS_GROUP_ID
FROM
HR_OPERATING_UNITS OU WHERE OU.SET_OF_BOOKS_ID =:B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.05 11 22 0 3
total 3 0.00 0.05 11 22 0 3
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
3 HASH UNIQUE (cr=22 pr=11 pw=0 time=52023 us cost=10 size=66 card=1)
3 NESTED LOOPS (cr=22 pr=11 pw=0 time=61722 us)
3 NESTED LOOPS (cr=20 pr=11 pw=0 time=61672 us cost=9 size=66 card=1)
3 NESTED LOOPS (cr=18 pr=11 pw=0 time=61591 us cost=7 size=37 card=1)
3 NESTED LOOPS (cr=16 pr=11 pw=0 time=61531 us cost=7 size=30 card=1)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=11 pr=9 pw=0 time=37751 us cost=6 size=22 card=1)
18 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK1 (cr=1 pr=1 pw=0 time=17135 us cost=1 size=0 card=18)(object id 43610)
3 TABLE ACCESS BY INDEX ROWID HR_ALL_ORGANIZATION_UNITS (cr=5 pr=2 pw=0 time=18820 us cost=1 size=8 card=1)
3 INDEX UNIQUE SCAN HR_ORGANIZATION_UNITS_PK (cr=2 pr=0 pw=0 time=26 us cost=0 size=0 card=1)(object id 43657)
3 INDEX UNIQUE SCAN HR_ALL_ORGANIZATION_UNTS_TL_PK (cr=2 pr=0 pw=0 time=32 us cost=0 size=7 card=1)(object id 44020)
3 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=2 pr=0 pw=0 time=52 us cost=1 size=0 card=1)(object id 330960)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=2 pr=0 pw=0 time=26 us cost=2 size=29 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 11 0.01 0.05
asynch descriptor resize 2 0.00 0.00
INSERT INTO FND_LOG_MESSAGES ( ECID_ID, ECID_SEQ, CALLSTACK, ERRORSTACK,
MODULE, LOG_LEVEL, MESSAGE_TEXT, SESSION_ID, USER_ID, TIMESTAMP,
LOG_SEQUENCE, ENCODED, NODE, NODE_IP_ADDRESS, PROCESS_ID, JVM_ID, THREAD_ID,
AUDSID, DB_INSTANCE, TRANSACTION_CONTEXT_ID )
VALUES
( SYS_CONTEXT('USERENV', 'ECID_ID'), SYS_CONTEXT('USERENV', 'ECID_SEQ'),
:B16 , :B15 , SUBSTRB(:B14 ,1,255), :B13 , SUBSTRB(:B12 , 1, 4000), :B11 ,
NVL(:B10 , -1), SYSDATE, FND_LOG_MESSAGES_S.NEXTVAL, :B9 , SUBSTRB(:B8 ,1,
60), SUBSTRB(:B7 ,1,30), SUBSTRB(:B6 ,1,120), SUBSTRB(:B5 ,1,120),
SUBSTRB(:B4 ,1,120), :B3 , :B2 , :B1 ) RETURNING LOG_SEQUENCE INTO :O0
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 20 0.00 0.03 4 1 304 20
Fetch 0 0.00 0.00 0 0 0 0
total 21 0.00 0.03 4 1 304 20
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 LOAD TABLE CONVENTIONAL (cr=1 pr=4 pw=0 time=36498 us)
1 SEQUENCE FND_LOG_MESSAGES_S (cr=0 pr=0 pw=0 time=24 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.01 0.03
SELECT MESSAGE_TEXT, MESSAGE_NUMBER, TYPE, FND_LOG_SEVERITY, CATEGORY,
SEVERITY
FROM
FND_NEW_MESSAGES M, FND_APPLICATION A WHERE :B3 = M.MESSAGE_NAME AND :B2 =
M.LANGUAGE_CODE AND :B1 = A.APPLICATION_SHORT_NAME AND M.APPLICATION_ID =
A.APPLICATION_ID
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.03 4 12 0 2
total 5 0.00 0.03 4 12 0 2
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=6 pr=2 pw=0 time=15724 us cost=3 size=134 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=20 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_NEW_MESSAGES (cr=4 pr=2 pw=0 time=15693 us cost=2 size=125 card=1)
1 INDEX UNIQUE SCAN FND_NEW_MESSAGES_PK (cr=3 pr=1 pw=0 time=6386 us cost=1 size=0 card=1)(object id 34367)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.00 0.03
DELETE FROM MO_GLOB_ORG_ACCESS_TMP
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.02 3 4 4 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 3 4 4 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
0 DELETE MO_GLOB_ORG_ACCESS_TMP (cr=4 pr=3 pw=0 time=29161 us)
1 TABLE ACCESS FULL MO_GLOB_ORG_ACCESS_TMP (cr=3 pr=2 pw=0 time=18165 us cost=2 size=13 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 3 0.01 0.02
SET TRANSACTION READ ONLY
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 0 0
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
begin Fnd_Concurrent.Init_Request; end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 148 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 148 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
log file sync 1 0.01 0.01
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
declare X0rv BOOLEAN; begin X0rv := FND_INSTALLATION.GET(:APPL_ID,
:DEP_APPL_ID, :STATUS, :INDUSTRY); :X0 := sys.diutil.bool_to_int(X0rv);
end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 9 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 9 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 8 0.00 0.00
SQL*Net message from client 8 0.00 0.00
begin fnd_global.bless_next_init('FND_PERMIT_0000');
fnd_global.initialize(:session_id, :user_id, :resp_id, :resp_appl_id,
:security_group_id, :site_id, :login_id, :conc_login_id, :prog_appl_id,
:conc_program_id, :conc_request_id, :conc_priority_request, :form_id,
:form_application_id, :conc_process_id, :conc_queue_id, :queue_appl_id,
:server_id); fnd_profile.put('ORG_ID', :org_id);
fnd_profile.put('MFG_ORGANIZATION_ID', :mfg_org_id);
fnd_profile.put('MFG_CHART_OF_ACCOUNTS_ID', :coa);
fnd_profile.put('APPS_MAINTENANCE_MODE', :amm); end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 8 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 8 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
SELECT FPI.STATUS, FPI.INDUSTRY, FPI.PRODUCT_VERSION, FOU.ORACLE_USERNAME,
FPI.TABLESPACE, FPI.INDEX_TABLESPACE, FPI.TEMPORARY_TABLESPACE,
FPI.SIZING_FACTOR
FROM
FND_PRODUCT_INSTALLATIONS FPI, FND_ORACLE_USERID FOU, FND_APPLICATION FA
WHERE FPI.APPLICATION_ID = FA.APPLICATION_ID AND FPI.ORACLE_ID =
FOU.ORACLE_ID AND FA.APPLICATION_SHORT_NAME = :B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.00 0 7 0 1
total 4 0.00 0.00 0 7 0 1
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=7 pr=0 pw=0 time=89 us)
1 NESTED LOOPS (cr=6 pr=0 pw=0 time=93 us cost=4 size=76 card=1)
1 NESTED LOOPS (cr=5 pr=0 pw=0 time=77 us cost=3 size=67 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=19 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_PRODUCT_INSTALLATIONS (cr=3 pr=0 pw=0 time=51 us cost=2 size=58 card=1)
1 INDEX RANGE SCAN FND_PRODUCT_INSTALLATIONS_PK (cr=2 pr=0 pw=0 time=27 us cost=1 size=0 card=1)(object id 22583)
1 INDEX UNIQUE SCAN FND_ORACLE_USERID_U1 (cr=1 pr=0 pw=0 time=7 us cost=0 size=0 card=1)(object id 22597)
1 TABLE ACCESS BY INDEX ROWID FND_ORACLE_USERID (cr=1 pr=0 pw=0 time=7 us cost=1 size=9 card=1)
SELECT P.PID, P.SPID, AUDSID, PROCESS, SUBSTR(USERENV('LANGUAGE'), INSTR(
USERENV('LANGUAGE'), '.') + 1)
FROM
V$SESSION S, V$PROCESS P WHERE P.ADDR = S.PADDR AND S.AUDSID =
USERENV('SESSIONID')
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.00 0 0 0 1
total 3 0.00 0.00 0 0 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1883 us cost=1 size=108 card=2)
1 HASH JOIN (cr=0 pr=0 pw=0 time=1869 us cost=1 size=100 card=2)
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1059 us cost=0 size=58 card=2)
182 FIXED TABLE FULL X$KSLWT (cr=0 pr=0 pw=0 time=285 us cost=0 size=1288 card=161)
1 FIXED TABLE FIXED INDEX X$KSUSE (ind:1) (cr=0 pr=0 pw=0 time=617 us cost=0 size=21 card=1)
181 FIXED TABLE FULL X$KSUPR (cr=0 pr=0 pw=0 time=187 us cost=0 size=10500 card=500)
1 FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=4 us cost=0 size=4 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 2 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 6 0.00 0.00 0 0 0 0
Execute 6 0.01 0.02 0 165 0 4
Fetch 1 0.00 0.00 0 0 0 1
total 13 0.01 0.02 0 165 0 5
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 37 0.00 0.00
SQL*Net message from client 37 1.21 2.19
log file sync 1 0.01 0.01
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 49 0.00 0.00 0 0 0 0
Execute 89 0.01 0.07 7 38 336 24
Fetch 29 0.00 0.09 15 168 0 27
total 167 0.02 0.16 22 206 336 51
Misses in library cache during parse: 3
Misses in library cache during execute: 1
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 6 0.00 0.00
db file sequential read 22 0.01 0.14
48 user SQL statements in session.
1 internal SQL statements in session.
49 SQL statements in session.
0 statements EXPLAINed in this session.
Trace file compatibility: 10.01.00
Sort options: prsela exeela fchela
1 session in tracefile.
48 user SQL statements in trace file.
1 internal SQL statements in trace file.
49 SQL statements in trace file.
48 unique SQL statements in trace file.
928 lines in trace file.
1338833753 elapsed seconds in trace file. -
Standard and customized reports
Experts,
I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
OPEN PURCHASE ORDER REPORT
OPEN REQUISITION REPORT
OPEN RFQ REPORT
PURCHASE ORDER CONFIRMATION REPORT
STOCK ITEMS RE-ORDER
STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX
STOCK ITEMS BELOW STOCK MIN
STOCK ITEMS DETAILS
STOCK ITEMS INVENTORY CONTROL
STOCK ITEMS LIST BY NUMBER
STOCK ITEMS MOST USED
STOCK ITEMS NOT USED
STOCK ITEMS ORDER BY COST
STOCK ITEMS ORDER BY LOCATION
STOCK ITEMS ORDER BY VENDOR
STOCK ITEMS OVER RESERVED
STOCK ITEMS STATUS
STOCK ITEMS VALUE
VENDOR PERFORMANCE REPORT
Regards,Hi,
SAP Std. Reports Description Z-Dev
ME2N / ME2M / ME2L OPEN PURCHASE ORDER REPORT
ME5A OPEN REQUISITION REPORT
ME4N / ME4M / ME4L OPEN RFQ REPORT
ME2A / VL06I PURCHASE ORDER CONFIRMATION REPORT
MB53 STOCK ITEMS RE-ORDER ABAP Report
MB24 / MB25 STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX ABAP Report
STOCK ITEMS BELOW STOCK MIN ABAP Report
MMBE / MB52 STOCK ITEMS DETAILS
MC.1 / MC.9 STOCK ITEMS INVENTORY CONTROL
MMBE / MB52 STOCK ITEMS LIST BY NUMBER
MC46 STOCK ITEMS MOST USED
MC50 STOCK ITEMS NOT USED
ME2N / ME2M / ME2L STOCK ITEMS ORDER BY COST
ME2N / ME2M / ME2L STOCK ITEMS ORDER BY LOCATION
ME2L STOCK ITEMS ORDER BY VENDOR
MB24/MB25 STOCK ITEMS OVER RESERVED ABAP Report
MMBE/MB53 STOCK ITEMS STATUS
MB52 STOCK ITEMS VALUE
ME6H VENDOR PERFORMANCE REPORT -
Inventory audit report and Inventory GL balance - Not matching
Team
I taken the report from Inventory audit report , this is not matching with inventory charts of accounts balance.
What may be the error
How to close old topics, how to provide the points for good suggestion. My points also not increased , what I need to do increase my points.
Thanks
Anantha DesaiHi,
1. Please check if any manual JE posted to that GL account
2. How to close old topics
There are two way close discussions:
----> If you got right answer, you can choose "correct answer" option in replies.
----> If you get an idea or suggestions, you can choose "Helpful answers" and need to close manually by choosing "Assumed answered:.
how to provide the points for good suggestion
Please choose "helpful answer" and "Like" option for good suggestions
My points also not increased , what I need to do increase my points.
Points will be increased, if you provide right suggestions, ideas and answers to other member discussion.
Refer this document for further details:
http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why
Thanks & Regards,
Nagarajan -
Few questions when using a custom report row template. Followup to the discussion Report Row Template: Column condition
1. The row template allows full control how the entire row is rendered. I can see this being used when the report query returns a single row and we need to format it in a very specific way. But when the query returns multiple rows, how is the specified Row Template used? i.e the first row is "consumed" and rendered as per the template. If the same process is repeated for subsequent rows, how can we control whether successive rows are rendered across the page (left to right) or down the page (top to bottom)?
2. When a custom row template is used to render a tabular form, the hidden columns (marked Edit=Y, Show=N on Report Attributes) are present in the markup even when they are not specified in the row template! i.e. the MRU process works. Of course, this is a good thing but I was curious to know what exactly controls this, what part of the report template controls where the hidden form elements are placed?
3. Any number/date formatting specified declaratively on the Column Attributes page appears to be taken into account when column values are substituted in the template using #COL# notation. But all the other Column Attributes are ignored (alignment, sum, show, link, etc). Is there a way to use the Link attribute to declaratively specify the link so the value of the column #COL# as seen by the report template includes the A tag?
ThanksComments? Thanks
-
Custom Report Layout with mutliple child tables
I am trying to create a custom report layout (using Bi Publisher) where I have parent data (multiple jobs on a page) and several child tables for each job (JobDays and JobStops) and several child tables for JobDays (JobDayProviders, JobDayCrew). On the apex screen, I have a join on Jobs and JobDays and I am using functions to string each child row value for JobDayProviders and JobDayCrew together and putting a <br> in between so that they will format on separate lines within a cell. It works fine on the screen but when trying to print to pdf, it ignores these line breaks. I have also tried using <br></br> (saw an article that said just use HTML in bi pulisher) which puts two lines in between each value on the screen and is still ignored on the pdf.
for example:
Table hierarchy:
Jobs table
Job Stops
Job Days
Job Day Service Providers
Job Day Crew
Report Layout per job (will have mutlipe jobs to print, just printing 1 day per job):
Jobs.col1 JobStops.row1 JobDay.col1 JobDayProviders.row1 JobDayCrew.r1
JobStops.row2 JobDayProviders.row2 JobDayCrew.r2
JobDayProviders.row3
Thanks,
Linda
First, is there a way to get bi publisher to recognize the line breaks? If not, what is the best way to create a custom report for this scenario? I tried to create a report query with mutliple queries, but cannot determine how to link the child queries to the paren query. I have seen an example where a button is pressed to print one parent row and the id of that row is saved and referenced as a parameter in each of the queries, but if printing mutliple parents on a report, how would I link the child queries to the parent query?Helen,
The best way for your case is to use a content folder and customize it whichever way you like.
however, your question is about reports. the problem in reports is this that you have to use just one single query and the layout of the results of this query are displayed in a peculiar way.
anyway. something similar but not exactly the same as what you wanted do is the following.
use a query like the following: (with a union in between)
SELECT COLUMN1,NULL , NULL ,NULL ,NULL
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
UNION
SELECT NULL,COLUMN2 , COLUMN3, COLUMN4, COLUMN5
FROM my_source_table
WHERE myCriteria LIKE 'SoAndSo%'
---------- Now, have the following codes in the layout segments:
<!--- header --->
<table border="0" cellpadding="1" cellspacing="1" width="20%" align="center">
<!--- body --->
<tr align="center">
<td><table border="0" cellpadding="1" cellspacing="0" width="30%" align="center">
<tr align="center">
<TH><#COLUMN1.FIELD#></TH>
</tr>
</table>
</td>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN2.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN3.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN4.FIELD#></TD>
<TD class="report_cell" ALIGN="LEFT"><#COLUMN5.FIELD#></TD>
</tr>
<!--- footer --->
<TR><TD></TD></TR>
this should produce a report with a table structure (you may see the whole if you give BORDER="1" in the main table tag). Within this table, the first column of the first row should be showing top-leftmost column value once (COLUMN1 value) and then the next rows would show last four column values as a table block on the right-bottom part.
with kind regards,
naqvi -
Custom Report Syntax - Prompt for limiting collection
I'm building a customer report that will display maintenance windows for multiple devices. I'd like to be able to filter the number of devices reported by collection (as to not have EVERY device in the console listed all at once).
I've got the report working for everything except the filtering part. Do I need to add a new Dataset and then filter it somehow? Here's my only dataset so far:
FIELDS: Computername, CollectionName, Next_Maintenance_Window
QUERY:
select
v_FullCollectionMembership.Name as Computername ,v_Collection.Name as CollectionName,
v_ServiceWindow.Description as 'Next Maintenance Window'
from v_ServiceWindow
inner join v_FullCollectionMembership on (v_FullCollectionMembership.CollectionID = v_ServiceWindow.CollectionID)
inner join v_Collection on (v_Collection.CollectionID = v_FullCollectionMembership.CollectionID)
order By Computername
What do I need to add to be able to select the collection 1st then run the query above?HI
Or you could do it like this:
Create a new dataset and paste in the following Query:
SELECT
v_Collection.Name
,v_Collection.CollectionID
FROM
v_Collection
Where CollectionType=2
Insert the following code in your own Query (dataset) right before order by Computername
Where v_Collection.Name = (@CollID)
Expand Parameters in Report Builder, you should see a paramter called @CollID
Right-click CollID and fill in the following information on the general page:
Name: CollID
Prompt: Collection
On the Available Values select Get values from a query
Dataset: Dataset2 (the new dataset you just created)
value field: Name
Label field: Name
Design your layout in report builder and run the report. You will get a drop-down box with all your device collections.
This report is not "RBAC" enabled -
Error in Custom Report.
Hi All,
When i am running a custom report, it gives me the below error. Anyone please advice on what can be done to resolve this error. thanks in advance.
WGT Custom: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
BVTWIPDJPCK module: GB BVT - Barcoded Discrete Pick List
Current system time is 27-SEP-2012 15:49:53
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SORT_BY='6'
P_TXN_ONLY='2'
P_FROM_JOB='2265926'
P_TO_JOB='2265926'
P_ORGANIZATION_ID='3630'
P_qty_precision='2'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x005bdc9d, pid=18089, tid=3453852560
# Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
# Problematic frame:
# C [libc.so.6+0x57c9d] fclose+0x1d
# An error report file with more information is saved as hs_err_pid18089.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Report Builder: Release 10.1.2.3.0 - Production on Thu Sep 27 15:49:58 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 45097091.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 27-SEP-2012 15:50:05
---------------------------------------------------------------------------Please enable trace/debug and see if more details are recorded in the concurrent request log file then.
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
Also, please see old threads.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Signal+AND+6&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Signal+AND+6+AND+Custom&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Inventory aging report, plz help me its very urgent
Hi experts,
i have a problem in reporting, yesterday i got requirement form uesrs for Inventory Aging report,
the report fields Contains
1) Plant
2) Meterial
3) Stock as on date( closing stock) with both fields Quantity & value fields
4) Average Useage in 6 months with both fields Quantity & Value
5) Month on Hand in units
6)Inventory Aging 30 days with Units and quantity
60 days with Units and quantity
90 days with Units and Quantity
120 days
150days
180 days
270 days
365 + days
we are using bw 3.5 version
note: we are u using standard Business Content Cube ( 0IC_C03) with is coming fron standard Business content DataSources 2Lis_03_BX, 2Lis_03_BF, 2Lis_03_UM
please suggest me to make this report, please send process in clearly.
i will assign full points
Advance thanks,
Sudheerhello Sudheer,
I remember once creating an Inventory aging document whcih had somwhat the same requirment of going back 6weeks and the other was like 18 weeks from the current week.Do you have cubes regarding the diffrent types of orders, like Planned order, Purchase order, production order and purchase requistion or a multi on top of it.If so then create query on top of this multiprovider like Inventory aging 30days, inventory aging 60days etc.then in that query create a variable on calweek (Single value,mandatory and customer exit), this variable should be able to get the current week (depending on when your table was loaded in R3 and if you can get that info thru rfc in BI), this is so that you can determine current week and then specify variable off set in diffrent queries with diffrent requirements of going back, ex: -4 (for 4 weeks ie 1 month) etc, or just create your variable on calmonth and then you need to set an offset just one month back ex -1.
Create APDs and then load the data in transactional DSOs.Excecute the APD one at a time into the diffrent cubes .Create a multiprovider if you want on top of it.
Hope this can get you started....
Krrish -
Error "REP-0788: Warning" on registering custom report to e-Business Suite
Hi
I done the register of custom report to Oracle e-Business Suite 11i got the below error
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 4579
REP-3000: Internal error starting Oracle Toolkit.
REP-0788: Warning: The value of restricted LOV parameter P_1 is not among the selectable values.
Report Builder: Release 6.0.8.24.0 - Production on Tue Apr 14 10:25:34 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 715975.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
please anyone help on this.
regards,
svaHi,
What is the type of the report? Is it bitmap? If yes, please make sure that the DISPLAY is set properly. Also, change the report type to text and see if you can submit the request successfully.
Here are some additional troubleshooting documents to look at:
Note: 200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200474.1
Note: 364838.1 - Quick Checks for REP-3000: Internal Error Starting Oracle Toolkit.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364838.1
Regards,
Hussein -
Error REP-0300: ORACLE error occurred while running Custom Report
Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein -
Error while running Inventory Audit Report
Hi All,
While running the inventory audit report based on posting date, we get the message,'The report returns too many records for this action and may cause SAP Business One to stop responding for a long time or shut down. Do you want to continue?' Continue, cancel (buttons).'
I have checked SAP Note 1624660 and also https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=98238470
however, no correct solution is provided.
What are the other options that we may use to run this report?? shorten the date range or run by system date??
Any inputs will be appreciated!!
Thanks,
JosephHi!
It would be better if you narrow down your selection like,
More Range of Date with Single Warehouse
Less Range of Date with Multi Warehouse
More Range of Date with Single Item Group
and more....
I have faced a similar issue on Customer Aging for which SAP Support has replied, SAP B1 is a 32 Bit application and when the virtual memory consumption goes beyond a limit (1 GB) ;SAP will close. And they said this is the limitation for all 32 bit applications.
Maybe you are looking for
-
Within Internet Explorer you can click on a little arrow next to the homepage icon and a dropdown appears with a list of your homepages (I have 5). So if I want to quickly check my facebook or e-mail I can click on it and then on whichever I want to
-
I'm trying to open premiere elements in windows 8.1 Help!
I just bought a new Dell computer & downloaded Premiere elements 12 How do I open it?
-
How to deploy selected components on the production server with the same solution
Hello, We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well. Now, some issues
-
Same session in diffrent browser tab problem
Hello; I am having a problem (might be browsers claim it a feature) that my application shares the same session if I use to access it from different tabs of a browser. I have googled but could not find out any work around for it. I want to restrict t
-
Is it possible to make two different backup over two external HD with time machine?
The problem: Into my iMAC I have 1) work (text and design and photo) and 2) photo (my hobby) Directory of work is quite light, and Time Machine is very appropriate The directory photo is very big, many Gb, and TM cancel old backup of work and photo.