SCOM 2012r2 Favorite Report could not be shown on web console internal error 500

Please HELP!!!
My lab settings:
SCOM1, SCOM2, SQL1
Both SCOM servers were installed on 2012r2 Server and SCOM 2012 r2 Rollup3 with Web Console enabled.
Report server installed on SQL1, MSSQL2012 with Report service, All role are installed on different servers.
All servers are in the same domain
ISSUE:
I cannot run report from Favorite Report from Web Console using other non-domain computer. I got the error "500 internal server error" after run the report.
I got this message after enable error detail report after run report from Web.
PLEASE HELP ME!!!!!

Hi,
>>I cannot run report from Favorite Report from Web Console using other non-domain computer. I got the error "500 internal server error" after run the report.
Do you mean that when you run report from Web console using domain joined computer everything works fine?
If so, then the issue seems like IIS authentication related issue, we may need check below settings:
Check the binding order in IIS where the web console is installed and make sure http is on top.
Check the advanced settings on Internet Explorer. Look for the Windows integrated authentication setting and compare this setting with the management server.
and I would like to suggest you go through the below threads for more details:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/36f68040-825c-4dce-b4f5-a4b4004259d1/scom-2012-web-console-from-remote-host-401-unauthorized-access-is-denied-due-to-invalid?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5d0029bd-a595-41aa-8065-2dd8fe34c0ac/scom-2012-web-console-401-unauthorized-access-is-denied-due-to-invalid-credentials?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Could not open the file. An internal error occurred.

Hi,
Anyone can solve my problem? Urgent!
I can't open a png file. Others files was ok, just only one file can't open after save.
It show : Could not open the file. An internal error occurred.
Thanks!

Seems like is corrupted during save or was caused by a Fireworks crash.
Try open with another version of Fireworks.
Linus
Fireworks Project Phoenix Product Manager
www.projectphoenix.io
https://www.facebook.com/groups/fwsingapore/
www.twitter.com/chunwui

CS4 - "Could not render the database. An Internal error occured"

I just purchased FW CS4 (full) to replace my ancient
Fireworks 4 (yes, *4*). Unfortunately, CS4 tries to update text in
my old FW files and promptly displays a message "Could not render
the database. An internal error occured." It would really suck if I
bought this but cannot edit my old FW files! Anyone else having
this trouble and know of a solution?
I am using Windows Vista Home Premium on a Dell XPS 420 with
a quad core processor.

Can you try the following solution posted at another Thread
which relates to Vista functioning?
"Navigate to the program file for the extension manager and
select properties. On the compatibility tab select the option to
run as administrator, click on the all users options and select run
as administrator for all users if desired and then apply. Of course
the option is only available if you have the UAC turned on.
Now, re-install the extensions and you should have no
problems. You'll just have to deal with the UAC everytime you use
the extension manager."
Does it solve the extensions installation issue?
quote:
Originally posted by:
Bopjo
quote:
Try resetting your Preferences file.
Nope, same problem. I have encountered a new problem as well.
When trying to install extentions from the FW exchange I get error
messages in the extention manager like:
"Can't create folder...[/path/]"

Error: Subreport could not be shown

I have check all post what ever posted as same like this question,but i didn't find solution,
I have update SQl 200 R2 with SP2. and using project server 2007 for showing report through report services server.
project server site is hosted on application server and database is on another server,and for SSRS ussing third one server where report has been deployed.
I can check all report perfectly running with no 'sub reports' error with my domain users as administrator.
When domain user try to open dashboard report ,he can easily see dashboard report but he can see all sub report but one of them show message there as
"Error: Subreport could not be shown".
Might be some permission issue is thare.
Kindly do need full any body.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Share Point Application Developer,TCS

Configure the SSRS configuration seting and enable integarted authnetication.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

"The document 'Backup of Backup of Oral Report' could not be saved as 'Oral Report'. Bad file descriptor"

Hello,
Whenever I try to save my Keynote file, I receive an error message saying: "The document 'Backup of Backup of Oral Report' could not be saved as 'Oral Report'. Bad file descriptor".
I've tried using other name to save my file, saving the file as a backup, saving it within my documents, and on a USB, but the file won't save. I'm using Keynote '09, Version 5.1.1 (1034) on my Mac Desktop running Mac OS X Version 10.6.8
How can I fix this problem and save my file?

change icloud backup to local backup on this compuet. this worked for me.

What causes "report could not be opened for writing . . ." message

"This report could not be opened for writing. Any changes must be saved to a new file." The version is CR 2013 SP1. Win 7 Pro. I'm new to CR and can't figure out why I get this error. I've verified all Windows permissions. It's an SAP error message - not a Windows message. Thanks in advance.
rd

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

IP SLA Detailed daily, weekly Report could not be found

Hello.
I use Cisco Prime LMS 4.2.1. When i generate IPSLA Detailed UDP Jitter Report with granularity "Minute" "Hourly" everything is OK, but when i with "Daily" "Weekly" i get this message: "Report could not be found". Report "Availability" and "Latency" generate well.
In IPSLA System summary i see again only "Availability" and "Latency" reports.
System Consolidation Daily Job generates every day. And inside job i can see that UDP Jitter rows is proccesed.
By the way, I can generate UDP Jitter report from CLI.
In Relise notes LMS 4.2 i saw open bug CSCtv11780:
An error message "Report could not found" is displayed when you generate a report using:
•System: Management Type in the Report Attributes column, and
•any other attributes, such as Location from System Inventory Group in the Rules for Attributes column.
Someone help me, please.

SharePoint guys figured it out. That error about the missing DLL is very misleading because it's still not there after we got it all working.
needed to install sql 2012 sp2 msas oledb driver
some users didn't have limited read access to the root web app
Jakub @ Adelaide, Australia Blog

RME Hardware Inventory Report gets Error: Report Could Not be Found

LMS 3.2
RME 4.3.0
When running Inventory Hardware report I select all devices and it shows the correct number of devices selected
However, the report is missing all routers, and I get the error message Report could not be found.

Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve?
Sorry to say but I don't find these forums of much use.

Xl reporter could not be installed

hi i have installed office 2007 and using sap b1 2005 ,when try to install xl reporter,i am getting error that xl reporter coulde not be installed as exell is installed. please can any one help me

Hi,
Is this only for one client or not? What is you OS?
Thanks,
Gordon

The report could not be opned from BusinessObjects Enterprise.

The following is the error message that I am getting.
The report could not be opned from BusinessObjects Enterprise.
Possibly the report is on a different BusinessObjects Enterprise system that the one you are currently logged on to. If this problem persists, pelase contact your administrator.
I am at a different location. All I am trying is to access the report using crystal reports 11.
The port issue was solved. I can login to the server and see the list of all the reports, but when I started clicking each report, I am getting the above error.
Let me know if there is any soultion to this.
Thanks
san
Edited by: xavier on Jul 28, 2009 4:59 PM

initially the port number 1725 (i mean the default crystal report port number) was blocked. so i was getting the error
"transport error: communication failture"
but after they opened it up I was able to login to the report folders, but couldnt go foward beyond that.
so you are saying, they will have to open up more ports?
Thanks,
San

Firefox says archived crash report could not be located. How do I get help?

I have had Firefox crash 3 times today. However, when I try to get details based on the crash ID's, Firefox says "Oh Noes! The archived report could not be located." Can someone help me based on below crash ID's?

The first crash report is a problem with the Flash plugin. The other two aren't loading and were probably not submitted.
That crash report shows a Flash 10.1 r85 plugin (NPSWF32.dll 10.1.85.3), but your More system details list shows the latest Flash 10.1 r102 plugin.<br />
Did you update recently or are you using another computer to post this??
See:
*http://kb.mozillazine.org/Flash
*http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

Book Module Error "Could not contact the Blurb Web Service"???

I have successfully used Lightroom in the past to upload a book with no problems. I'm currently running the most updated version of Lightroom v 5.6. I've just finished a new book and am getting the error message "Could not contact the Blurb Web Service. Check your internet connection." My internet connection is fine, my firewalls and anti-virus are turned off, I've restarted both Lightroom and my computer. Same problem.
My research has shown this is a very common problem, but all the forums I've found do not have answers on how to solve the problem. All the posts I've found about this problem are either unanswered or suggest things like turning off and turning back on "unchecking apply background globally" and other tips related to the background and text, or change the cover style back and forth, etc. None of these has worked for me.
I am ordering this book as a wedding album for a client and it is URGENT that I get the order uploaded within the next few days or I'm going to have to refund the clients' payment and lose the job, which would be extremely professionally embarrassing. I'm VERY frustrated and have very eager customers waiting. PLEASE HELP ASAP!!!
Janine Fugere
As Seen by Janine
www.asseenbyjanine.com

I solved the Lightroom Book Module problem of "Could not contact Blurb Web Service. Please check your internet connection."
With the help of Adobe Lightroom's telephone tech support, a very patient man named Himanshu helped me discover what was causing this issue, after researching the issue and calling me back. Nice touch Adobe! It was pleasant to be able to do other things while Himashu researched and consulted with other techs to find my solution.
As very many other people have reported in user forums, the problem was not that I didn't have an Internet connection.
The problem was caused by my PC's Windows 8 User Account Settings, which somehow had Internet Settings that conflict with the upload to Blurb from Lightroom. The Adobe Lightroom tech support person helped me create a new user account, and I am able to successfully upload to Blurb from Lightroom under the new account. We created a quick test book to try and it worked just fine under the new user account.
Not sure how this solution would translate for a MAC user (I've read of people with Mac computers getting the same upload error) but I advise checking your User Account's Internet Settings, whatever type of computer you are using.
The only minor glitch I still have is that my new Windows user account can't access any of my photo files (or any other files) from my old user account, even when I gave the new user account administrator access. I have a very large internal hard drive, so my photos & catalog are stored internally. The Lightroom tech support advised me to contact Lenovo (my computer manufacturer) for help to transfer all my files from my original user account to the new one I just created. I will do that very soon.
Meanwhile, my temporary workaround was to export my Lightroom Catalog and the photos I needed for this book onto an external hard drive, so I could access them from the new user account. My wedding clients' book has been successfully uploaded to Blurb!
I'm sharing so others with this problem uploading from Lightroom to Blurb may also find this solution works for them, too.

Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error code -50) imovie 09 v8.0.6

When I try to export the movie I get this error code. Im doing a music video and have put days into it and now I can not get it to export! My other small project export with no problem.

Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated.

Imovie error The project could not be prepared for publishing because an error occurred. (-50)

I can't export my imovie project.
Appears this message:
"The project could not be prepared for publishing because an error occurred. (-50)"
What can I do?

Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

SCOM 2012r2 Favorite Report could not be shown on web console internal error 500

Similar Messages

Maybe you are looking for