SD and FI Tables
Hi
I need to connect the following tables:
LFA1, BSIK, BSEG, LIKP,VBRK, VBRP, MSEG, RBKP.
Can anyone plz tell me which keys(fields) will be used.
Thanks,
Amit.
LIKP-LIFNR = LFA1-LIFNR
VBRK-VBELN = VBRP-VBELN
VBRP-VBELN = MSEG-KDAUF
MSEG-PARBU = BSIK-BUKRS
MSEG-LIFNR = BSIK-LIFNR
MSEG-VFDAT =BSIK-AUGTD
MSEG-MBLNR = BSIK-AUGBL
MSEG-MJAHR = BSIK-GHAHR
MSEG-LFBNR = BSIK-BELNR
MSEG-BUZEI = BSIK-BUZEI
BSIK-BUKRS = RBKP-BUKRS
BSIK-LIFNR = RBKP-LIFNR
BSIK-AUGTD = RBKP-BLDAT
BSIK-AUGBL = RBKP-BELNR
BSIK-ZUONR = RBKP-ZUONR
BSIK-GJAHR = RBKP-GJAHR
BSIK-BELNR = RBKP-STBLG
REWARD POINTS
SANTHOSH
Similar Messages
-
Sy-tabix in relation to LOOP AT and READ TABLE
Hi All,
As per SAP documentation,
1) While looping through an internal table (LOOP AT), sy-tabix contains the index number of current row(for standard and sorted tables)
2)When successfully reading from an internal table(READ TABLE), sy-tabix is set to the index of the result row.
But what happens when READ TABLE is used while looping through another internal table?
i.e. Loop at TAB1...
write sy-tabix.
READ TABLE TAB2...
write sy-tabix.
endloop.
If we are looping through 1st row of TAB1 and the result of read statement is found in 3rd row of TAB2, I expected that sy-tabix before READ would be 1 and after the READ be 3.
But, I found that sy-tabix remains unchanged at 1. Can someone expalin why?
Thanks,
JaganHi
If after reading the table TAB2 the system variable SY-TABIX has still the previous value, that menas the READ TABLE fails or it was read the first record of TAB2.
After READ TABLE TAB2 try to check the SY-SUBRC:
LOOP AT TAB1.
WRITE: / 'TAB1 index:', SY-TABIX.
READ TABLE TAB2 .........
IF SY-SUBRC = 0.
WRITE: 'TAB2 index:', SY-TABIX.
Try this:
DATA: BEGIN OF ITAB OCCURS 0,
FIELD1,
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
FIELD1,
END OF ITAB2.
DATA: INDEX TYPE I.
DO 10 TIMES.
APPEND ITAB.
ENDDO.
DO 10 TIMES.
APPEND ITAB2.
ENDDO.
LOOP AT ITAB.
WRITE: / 'ITAB:', SY-TABIX.
INDEX = SY-TABIX + 2.
READ TABLE ITAB2 INDEX INDEX.
IF SY-SUBRC = 0.
WRITE: 'ITAB2:', SY-TABIX.
ENDIF.
ENDLOOP.
Max -
In Answers am seeing "Folder is Empty" for Logical Fact and Dimension Table
Hi All,
Am working on OBIEE Answers, on of sudden when i clicked on Logical Fact table it showed me as "folder is empty". I restarted all the services and then tried still showing same for Logical Fact and Dimension tables but am able to see all my reports in Shared Folders. I restarted the machine too but no change. Please help me out to resolve this issue.
Thanks in Advance.
Regards,
Rajkumar.First of all, follow the forum etiquette :
http://forums.oracle.com/forums/ann.jspa?annID=939
React or mark as anwser the post that the user gave.
And for your question, you must check the log for a possible corrupt catalog :
OracleBIData_Home\web\log\sawlog0.log -
Best practice when FACT and DIMENSION table are the same
Hi,
In my physical model I have some tables that are both fact and dimension table, i.e. in the BMM they are of course separated into Fact and Dim source (2 different units) and it works fine. But I can see that there will be trouble when having more fact tables and I e.g. have a Period dimension pointing to all the different fact tables (different sources).
Seems like the best solution to this is to have an alias of the fact/transaction table and have 2 "copies" of the transaction table (one for fact and one for dimension table) in the physical layer. Only bad thing is that there will then allways be 2 lookups in the same table when fetching data from the dimension and the fact table.
This is not built on a datawarehouse - so the architecture is thereby more complex. Hope this was understandable (trying to make a short story of it).
Any best practice on this? Or other suggestions.Id recommend creation of a view in the database. if its an oracle DB, materialised views would be a huge performance benefit. you just need to make sure that the MVs are updated when the source is updated.
-Domnic -
Difference between YVBUK and XVBUK tables
Hello,
Can somebody explain me the user of Y* and X* tables for application tables such as VBUK, LIKP etc. in user exits?
According to note 415716 Y* tables store the condition of the record currently in the database and X* tables stores the changed value. But what happens if its a new record (UPDKZ = I), shouldnt Y* table be blank?
We have the following code in the user exit
INCLUDE YVUEPRZ1_DOC_SAVE_PREP_CARRIER *
perform update only if insert or update carrier
UPDKZ : Update indicator
DATA : ls_vbpa LIKE xvbpa.
LOOP AT xlikp.
v_index = sy-tabix.
CLEAR ls_vbpa.
READ TABLE xvbpa INTO ls_vbpa
WITH KEY vbeln = xlikp-vbeln
parvw = 'SP'.
CASE ls_vbpa-updkz.
WHEN 'I' OR 'U'.
MOVE-CORRESPONDING xlikp TO likp.
MOVE-CORRESPONDING xlikp TO likpd.
*-- Prepare changes of the delivery header
PERFORM likp_bearbeiten_vorbereiten(sapfv50k).
likp-yylfnr = ls_vbpa-lifnr.
*-- Check and confirm changes
PERFORM likp_bearbeiten(sapfv50k).
MOVE-CORRESPONDING likp TO xlikp.
MOVE-CORRESPONDING likpd TO xlikp.
MODIFY xlikp INDEX v_index.
IF t180-trtyp = 'V'. "Modification
xvbuk-uvk03 = 'D'.
xvbuk-updkz = 'U'.
MODIFY xvbuk TRANSPORTING uvk03 updkz WHERE vbeln = xlikp-vbeln.
ENDIF.
WHEN 'D'.
MOVE-CORRESPONDING xlikp TO likp.
MOVE-CORRESPONDING xlikp TO likpd.
*-- Prepare changes of the delivery header
PERFORM likp_bearbeiten_vorbereiten(sapfv50k).
CLEAR likp-yylfnr.
*-- Check and confirm changes
PERFORM likp_bearbeiten(sapfv50k).
MOVE-CORRESPONDING likp TO xlikp.
MOVE-CORRESPONDING likpd TO xlikp.
MODIFY xlikp INDEX v_index.
IF t180-trtyp = 'V'. "Modification
xvbuk-uvk03 = 'D'.
xvbuk-updkz = 'U'.
MODIFY xvbuk TRANSPORTING uvk03 updkz WHERE vbeln = xlikp-vbeln.
ENDIF.
ENDCASE.
ENDLOOP.
Now the problem is that SAP is saying that the table YVBUK also has to have the same record as XVBUK but I think its absurd for UPDKZ = I since there will be no database image for that.
thanksTo answer Peluka's question there are no entries in Y* table when UPDKZ = I or UPDKZ = U
and I dont quite understand what Ferry Lianto is saying but I think its pretty much the same as above
thanks for your help -
Difference between Temp table and Variable table and which one is better performance wise?
Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please VoteCheck following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page -
Performance syntax loop at and read table
in the routine , for reading one line in a internal table , the syntaxe
loop at xxx where and read tabl exxx with key XXXX
has a great difference on performance or not?Loop at statement is used only for processing multiple records.Read table is used for reading a particluar record of an internal table.If you just need to check whether record exists in internal table, use can sort and use binary search with TRANSPORTING NO FIELDS addition. Also, try to use field symbols so that performance is increased.
-
No data in cube,but there is data in F and E table, also in dimension table
Hi, gurus,
I successfully loaded more than 100,000 records of data into an infocube, but when I check the content of the infocube(without any restriction), unexpectedly no data displayed, also after I checked the F and E table, still no data, but there is data in dimendsion tables. what happened?
please help. thanks a lot.Hi Kulun Rao,
Try the following options.
Check in the selection screen
Go to infocube through LISTCUBE t.code
Check the compression and roll-up statuses.
Check the reporting status in request tab.
Refresh the cube ( u already do it)
Check the index status in Request tab**
might be these things will help u.
Regards,
HARI GUPTA -
Question regarding Classic and Advance table
Hi,
I have classic and advance table. I am populating with VO that brings 100 record. When i render page i see last record being displayed. How can i show my first record by defult on both tables?By default the first record will be displayed, if you are seeing the last one instead, you probably did a vo.last() in the code.
Thanks
Tapash -
Problem with Master and Child table
Hi,
Working in jdev 11.1.1.2.0. I have one strange issue. i have master and child tables, the model is working fine with the view link. but when drag drop the same into my jsff. when i query the result 1st time 2 tables are refershing properly and data is coming. but the when i trying to select another row in the 1st table my 2nd table(child table) is not refreshing.
i put partial trigger of the 2nd table as 1st table id.
can any one help wht is issue here.
Edited by: user5802014 on Jul 15, 2010 3:44 PMCheck this post might help you
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html -
Relation b/w PRPS and RPSCO tables
Hi PS Experts,
What is the Relation b/w PRPS and RPSCO tables
PRPS : WBS (Work Breakdown Structure) Element Master Data
RPSCO : Project info database: Costs, revenues, finances
Thanks in Advance,
Regards,
sudharsan.Hello Sasikanth Thank u for ur information,
and i need some more information, am working on abap, now i got a requirement in PS,
i want 2 calculate the values like Planned Revenue, Planned Cost, Actuall Rev, Actuall Cost, Actuall Billing, Revenue Taken, Cost Taken, BNS and SNB.
based on i/p parameters: Company Code, Fiscal year and month.
pls let me know how to calculate the above values, its very urgent for me.
Thanks in advance,
sudharsan. -
Performance issue in BI due to direct query on BKPF and BSEG tables
Hi,
We had a requirement that FI document number fieldshould be extracted in BI.
Following code was written which has the correct logic but performance is bad.
It fetched just 100 records in more than 4-5 hrs.
The reason is there was a direct qury written on BSEG and BKPF tables(without WHERE clause).
Is there any way to improve this code like adding GJAHR field in where clause? I dont want to change the logic.
Following is the code:
WHEN '0CO_OM_CCA_9'." Data Source
TYPES:BEGIN OF ty_bkpf,
belnr TYPE bkpf-belnr,
xblnr TYPE bkpf-xblnr,
bktxt TYPE bkpf-bktxt,
awkey TYPE bkpf-awkey,
bukrs TYPE bkpf-bukrs,
gjahr TYPE bkpf-gjahr,
AWTYP TYPE bkpf-AWTYP,
END OF ty_bkpf.
TYPES : BEGIN OF ty_bseg1,
lifnr TYPE bseg-lifnr,
belnr TYPE bseg-belnr,
bukrs TYPE bseg-bukrs,
gjahr TYPE bseg-gjahr,
END OF ty_bseg1.
DATA: it_bkpf TYPE STANDARD TABLE OF ty_bkpf,
wa_bkpf TYPE ty_bkpf,
it_bseg1 TYPE STANDARD TABLE OF ty_bseg1,
wa_bseg1 TYPE ty_bseg1,
l_s_icctrcsta1 TYPE icctrcsta1.
"Extract structure for Datasoure 0co_om_cca_9.
DATA: l_awkey TYPE bkpf-awkey.
DATA: l_gjahr1 TYPE gjahr.
DATA: len TYPE i,
l_cnt TYPE i.
l_cnt = 10.
tables : covp.
data : ref_no(20).
SELECT lifnr
belnr
bukrs
gjahr
FROM bseg
INTO TABLE it_bseg1.
DELETE ADJACENT DUPLICATES FROM it_bseg1 COMPARING belnr gjahr .
SELECT belnr
xblnr
bktxt
awkey
bukrs
gjahr
AWTYP
FROM bkpf
INTO TABLE it_bkpf.
IF sy-subrc EQ 0.
CLEAR: l_s_icctrcsta1,
wa_bkpf,
l_awkey,
wa_bseg1.
LOOP AT c_t_data INTO l_s_icctrcsta1.
MOVE l_s_icctrcsta1-fiscper(4) TO l_gjahr1.
select single AWORG AWTYP INTO CORRESPONDING FIELDS OF COVP FROM COVP
WHERE belnr = l_s_icctrcsta1-belnr.
if sy-subrc = 0.
if COVP-AWORG is initial.
concatenate l_s_icctrcsta1-refbn '%' into ref_no.
READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(10) =
l_s_icctrcsta1-refbn
awtyp = COVP-AWTYP
gjahr = l_gjahr1.
IF sy-subrc EQ 0.
MOVE wa_bkpf-belnr TO l_s_icctrcsta1-zzbelnr.
MOVE wa_bkpf-xblnr TO l_s_icctrcsta1-zzxblnr.
MOVE wa_bkpf-bktxt TO l_s_icctrcsta1-zzbktxt.
MODIFY c_t_data FROM l_s_icctrcsta1.
READ TABLE it_bseg1 INTO wa_bseg1
WITH KEY
belnr = wa_bkpf-belnr
bukrs = wa_bkpf-bukrs
gjahr = wa_bkpf-gjahr.
IF sy-subrc EQ 0.
MOVE wa_bseg1-lifnr TO l_s_icctrcsta1-lifnr.
MODIFY c_t_data FROM l_s_icctrcsta1.
CLEAR: l_s_icctrcsta1,
wa_bseg1,
l_gjahr1.
ENDIF.
ENDIF.
ELSE. " IF AWORG IS NOT BLANK -
concatenate l_s_icctrcsta1-refbn COVP-AWORG into ref_no.
READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(20) =
ref_no
awtyp = COVP-AWTYP
gjahr = l_gjahr1.
IF sy-subrc EQ 0.
MOVE wa_bkpf-belnr TO l_s_icctrcsta1-zzbelnr.
MOVE wa_bkpf-xblnr TO l_s_icctrcsta1-zzxblnr.
MOVE wa_bkpf-bktxt TO l_s_icctrcsta1-zzbktxt.
MODIFY c_t_data FROM l_s_icctrcsta1.
READ TABLE it_bseg1 INTO wa_bseg1
WITH KEY
belnr = wa_bkpf-belnr
bukrs = wa_bkpf-bukrs
gjahr = wa_bkpf-gjahr.
IF sy-subrc EQ 0.
MOVE wa_bseg1-lifnr TO l_s_icctrcsta1-lifnr.
MODIFY c_t_data FROM l_s_icctrcsta1.
CLEAR: l_s_icctrcsta1,
wa_bseg1,
l_gjahr1.
ENDIF.
ENDIF.
endif.
endif.
CLEAR: l_s_icctrcsta1.
CLEAR: COVP, REF_NO.
ENDLOOP.
ENDIF.Hello Amruta,
I was just looking at your coding:
LOOP AT c_t_data INTO l_s_icctrcsta1.
MOVE l_s_icctrcsta1-fiscper(4) TO l_gjahr1.
select single AWORG AWTYP INTO CORRESPONDING FIELDS OF COVP FROM COVP
WHERE belnr = l_s_icctrcsta1-belnr.
if sy-subrc = 0.
if COVP-AWORG is initial.
concatenate l_s_icctrcsta1-refbn '%' into ref_no.
READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(10) =
l_s_icctrcsta1-refbn
awtyp = COVP-AWTYP
gjahr = l_gjahr1.
Here you are interested in those BKPF records that are related to the contents of c_t_data internal table.
I guess that this table does not contain millions of entries. Am I right?
If yes, the the first step would be to pre-select COVP entries:
select BELNR AWORG AWTYP into lt_covp from COVP
for all entries in c_t_data
where belnr = c_t_data-belnr.
sort lt_covp by belnr.
Once having this data ready, you build an internal table for BKPF selection:
LOOP AT c_t_data INTO l_s_icctrcsta1.
clear ls_bkpf_sel.
ls_bkpf_sel-awkey(10) = l_s_icctrcsta1-refbn.
read table lt_covp with key belnr = l_s_icctrcsta1-belnr binary search.
if sy-subrc = 0.
ls_bkpf_sel-awtyp = lt_covp-awtyp.
endif.
ls_bkpf_sel-gjahr = l_s_icctrcsta1-fiscper(4).
insert ls_bkpf_sel into table lt_bkpf_sel.
ENDLOOP.
Now you have all necessary info to read BKPF:
SELECT
belnr
xblnr
bktxt
awkey
bukrs
gjahr
AWTYP
FROM bkpf
INTO TABLE it_bkpf
for all entries in lt_bkpf_sel
WHERE
awkey = lt_bkpf_sel-awkey and
awtyp = lt_bkpf_sel-awtype and
gjahr = lt_bkpf_sel-gjahr.
Then you can access BSEG with the bukrs, belnr and gjahr from the selected BKPF entries. This will be fast.
Moreover I would even try to make a join on DB level. But first try this solution.
Regards,
Yuri -
Search a text in a multiple tables and one table has BLOB column
Hi,
I couldn't find a solution/examples for below scenario in oracle text documentation or related forums.
I need to search a text in a multiple tables,in that one table has blob column which is used to store the documnents(pdf,doc,jpg..etc) and other tables have varchar2 columns,These tables have realation each other.
Please provide a sample examples for above scenario.
Thanks in advance..Have a look at my blog entry here:
https://blogs.oracle.com/searchtech/entry/indexing_data_from_multiple_tables
That describes two methods of achieving what you are looking for. -
"How to sum FKIMG in VBRK and VBRP Table with sample output
Sir\Mam\Gurus ;
I hardly found it difficult in resolving my program in getting the sum of FKIMG inside the VBRP and VBRK tables
The scenario is that i have one Sales Order with multiple invoices . What i need to do is to sum up the fkimg or the quanitity of specific material regardless of how many invoices the material have in a particular SO
Example I have Sales Order number 35678952 with
3 invoices
Invoice # 123 with material number mat1=12, mat2=5 , mat3=7
345 with material number mat1=7, mat2=7
678 with material number mat1=5, mat3=10
Output shoud be
salesorder# 35678952
mat1 = 24
mat2 = 12
mat3 = 17
Below is my Sample Codes:
DATA : it_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
ls_vbrp_details TYPE wa_vbrp_details,
ls_vbrp_details1 TYPE wa_vbrp_details,
lsfinal_vbrp_details TYPE wa_vbrp_details,
it2_vbrp_details TYPE STANDARD TABLE OF wa2_vbrp_details,
ls2_vbrp_details TYPE wa2_vbrp_details,
it3_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal1_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal2_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
itfinal3_vbrp_details TYPE STANDARD TABLE OF wa_vbrp_details,
ls3_vbrp_details TYPE wa_vbrp_details,
rtime1 TYPE i,
rtime2 TYPE i,
rtime3 TYPE i,
s_erdate type d,
scr_erdat type d,
s_erdate = scr_erdat.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = 1 " Negative to subtract from old date, positive to add
olddate = s_erdate
IMPORTING
newdate = new_date.
""" This is another way manual adding by days
CALL FUNCTION 'CALCULATE_DATE'
EXPORTING
days = +30
start_date = s_erdate
IMPORTING
result_date = new_date.
result_date = ddate.
REFRESH: it_vbrp_details.
SELECT
vbrp~matnr
vbrp~aubel
vbrp~aupos
vbrp~vbeln
vbrp~kzwi1
vbrp~kzwi2
vbrp~kzwi3
vbrp~kzwi4
vbrp~kzwi5
vbrp~kzwi6
vbrp~mvgr1
vbrp~mvgr2
vbrp~mvgr3
vbrp~mvgr4
vbrp~mvgr5
vbrp~knuma_pi
vbrp~knuma_ag
vbrp~mwsbp
vbrp~vkaus
vbrp~fkimg
vbrk~vbeln
vbrk~fkart
vbrk~belnr
vbrk~xblnr
vbrk~vbtyp
vbrk~kunag
vbrk~fksto
vbap~posnr
INTO TABLE it_vbrp_details
FROM vbrp INNER JOIN vbrk ON vbrkvbeln EQ vbrpvbeln
where vbeln eq gt_data-vbeln
where vbrpaubel eq vbapvbeln
WHERE vbrp~posnr GE ''
AND vbrk~vbtyp EQ 'M'
AND vbrk~fksto NE 'X'
AND ( vbrperdat GE s_erdate OR vbrperdat LE new_date OR vbrp~erdat IN s_erdat ) " + JP 09 19 2011 Additional Optimization
ORDER BY aubel aupos .
ORDER BY aubel aupos matnr.
"""" This where i need your help Sir\Mam\Gurus
it3_vbrp_details = it_vbrp_details.
SORT it3_vbrp_details BY aubel matnr fkimg kzwi1 kzwi2 kzwi3 kzwi4 kzwi5 kzwi6 aupos vbeln
mvgr1 mvgr2 mvgr3 mvgr4 mvgr5 knuma_pi knuma_ag mwsbp vkaus fkart belnr vbtyp kunag fksto.
LOOP AT it3_vbrp_details INTO ls_vbrp_details.
COLLECT ls_vbrp_details INTO itfinal1_vbrp_details.
APPEND ls_vbrp_details TO it_vbrp_details.
ENDLOOP.
kzwi1,kzwi2,kzwi3 is also been sum up
Sir the output is something like this
Sales Ord# Material Qty KWIZ1 KWIZ2 KWIZ3 MGVR1 VBELN
1234 Mat1 24 23.2 22 12 LastInvoice#
1234 Mat2 12 20.0 21 15 LastInvoice#
1234 Mat3 37 22.0 22 16 LastInvoice#
5432 Mat1 30 25.0 23 15 LastInvoice#
5432 Mat2 24 22.0 24 23 LastInvoice#
5432 Mat3 20 18.0 20 12 LastInvoice#
Hope you can help me as i cant hardy sleep thinking of this ...
I will really appreciate your great help..
Thanks !
I will really appreciate your great help..
Thanks !
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Sep 20, 2011 3:05 PMHi,
How you want to display the output?..
If you want to display the output as mentioned below, then you have to use nested loop & dynamic field assignments to get result.
Output column
sales order Mat1 Mat2 Mat3 ......
1234 24 12 37
Kindly let me know, if you have any questions
Regards,
S.Senthilkumar -
RELATIONSHIP BETWEEN VBAK/VBAP AND V46R_HEAD TABLE
Hi,
can you please tell me that is there any relationship between VBAK and V46R_HEAD TABLE or VBAP and V46R_HEAD TABLE table.
where V46R_HEAD TABLE is a structure and i want to display sme fields of vbak and some of V46R_HEAD and some of VBAP.
I got the relation between VBAK and VBAP ie. the field VBELN. But i am not getting the relation with V46R_HEAD sturcture.
Please help me to solve this problem.Hi,
the field vbeln is present in V46R_HEAD also.
Please check it!! Please do a CTR+F and look for VBELN.
Regards. -
Excise invoice table and billing table relation???
Can anyone please tell me how excise invoise and billing table are related??
Hi
check these table VBRP and VBRK
you wil get idea.
if its useful reward points
thanks
senthil
Maybe you are looking for
-
Sending email using BPEL 11g and Mail Sessions
Hi gurus, I have created a BPEL process which can emails to a set of people. The mail server, port etc are configured in EM Console --> user messaging service-email --> Email Driver Properties. I then added the 'from address' in soa infra --> workflo
-
Problem with itunes and iphoto after time machine restoration
After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different
-
How to go to a particular object in drill down detail pdf report?
In drill down html reports I could directly go to a particular object in the detail report from the summary report by using hyperlink destination property in the detail report and hyperlink property in the summary report. How can I do the same thing
-
8i Enterprise Edition on NT Server or Workstation
I'm planning on loading 8i EE for NT on my PC for educational purposes. Is there any reason I'd need to have NT Server rather than NT Workstation to run 8iEE?
-
I need to reactivate my membership, but there's an error with the reseller.
I'm trying to reactivate my membership but the reseller is not completing my order because of an internal error. So, now, my freelance is late because of a **** of a reseller problem and you guys don't offer me a chat, or a e-mail to contact. Plus, w