Since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status

since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please

Similar Messages

  • We recently had a few brief power failures. Since then, my Mac Pro has been very slow on start up. Any suggestions?

    We Recently had a few brief power failures. Since then, my Mac Pro has been very slow on startup. Any suggestions?

    Like the  man says:
    Run Disk Utility > Repair ... (not just repair permissions) while booted from another drive. If you have a stronger utility like Disk Warrior, that would be even better.
    If you find that the ONLY way you can do this is by booting from the DVD, The Hatter recommends you establish an emergency drive or partition on a drive other than the Boot drive and use that in the future. It makes emergency Repair, backup, and cloning much easier.

  • My Macbook Pro has not been running correctly since "upgrading" to Yosemite

    My Macbook Pro has not been running correctly since "upgrading" to Yosemite. It has been sluggish no matter what program I am using, slow to respond to mouse movements, and unable to stream video. Any word on when Apple is going to send out a real upgrade?

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.ce.

    Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.

    pklfromarlington wrote:
    Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
    You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us.

  • HT4623 Since updating to iOS6 my wifi has not been able to connect properly

    Since updating to iOS6 my wifi has not been able to connect properly.  Has this been a problem for anyone else?

    i have a iphone 4 and had a similar problem with the upgrade, I went into settings,general,cellular,and turned off icloud documents,passbook updates and reading list and it corrected my problems

  • Since the Yosemite upgrade on my macbook pro I have not been able to sync with my Nokia Lumia

    Since the Yosemite upgrade on my macbook pro I have not been able to sync with my Nokia Lumia and assume that this is an Apple issue?

    Two immediate questions:
    1. Why is this posted in Servers and Enterprise Software?
    2. What has this to do with Apple Remote Desktop?
    If you have posted incorrectly, then you should try posting this in the proper forum.

  • I have not been able to sync my mail with iCloud on my MacBookPro (Lion OS).  Everything else has been syncing fine for the past two months, but when I go to System Pref/iCloud/and try to check Mail, it asks me to choose an iCloud email address. When I

    I have not been able to sync my mail with iCloud on my MacBookPro (Lion OS).  Everything else has been syncing fine for the past two months, but when I go to System Pref/iCloud/and try to check Mail, it asks me to choose an iCloud email address. When I put in my regular @me.com email, it says that address already exists (of course it does - it's mine!) and wants me to choose another one.  But I want it to sync with my stuff.  What can I do?  I haven't been able to find help anywhere online...  Thanks!

    You should have signed in with that address in the first place, but there is a workaround: go to System preferences>Mail, Contacts@ Calendars and add your @me.com address as an account there.

  • Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not  have the proper security settings. Help!?!?

    Hello:
    I keep getting this message upon startup. Can't figure out how to address it. Here it is.
    "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
    Any suggestions?

    There's an invisible one name "Icon" according to the error message.
    Enable Finder to Show Invisible Files and Folders
    Open the Terminal application in your Utilities folder.  At the prompt enter or paste the following command line then press RETURN.
    defaults write com.apple.finder AppleShowAllFiles TRUE
    killall Finder
    To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
    defaults write com.apple.finder AppleShowAllFiles FALSE
    killall Finder
    Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
    First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

  • My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says: iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and conn

    My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says "iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wifi." I do not know what to do.

    Same situation.  Had to pull out the Mini to research this.  The Apple logo has been on the screen about five min, oh, just went black.  Home brought it back and popup is gone.  Wonder why this happened to many folks.

  • HT1476 since ive updated my iphone 5 to ios 7 my phone has not been able to charge is says "This cable accessory is not certified and may not work reliably with this iphone

    Does anyone know why my iphone5 has not been able to charge since ive updated it to ios7?

    It's happening even with cable that came with my wife and my own iphones. We bothe get the message!

  • Ipad is frozen . Message: iCloud backup -This Ipad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to WIFI. no icons respond ?????

    Ipad is frozen . Message: iCloud backup -This Ipad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to WIFI. no icons respond ????? cannot fix ? suggestions

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?

    I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?

    Jason The Hague wrote:
    Thanks!  But seriously why have Apple disabled the info sync on iTunes?  By 'Upgrading' to Mavericks I've inadvertantly disabled my Apple mobile devices from fulfilling their function.  Come on Apple work with us here!!
    Apple told developers they were removing that service over two years ago. The developers that depended upon it should have done something about it.
    Why did they remove it? My guess is because it was pretty crappy, was difficult to maintain, and wasn't a good solution for multiple devices that could get the info without tethering to a "base" Mac.

  • I have not been able to sync Entourage to iCloud ever since the iCloud update debacle of yesterday.  iCare just claims it is an Entourage problem when it is clear that the update did something that is not allow it to authenticate to sync mail.

    I have not been able to sync Entourage to iCloud ever since the iCloud update debacle of yesterday.  iCare just claims it is an Entourage problem when it is clear that the update did something that is not allow it to authenticate to sync mail.

    You should check that the settings match those in this page:
    http://support.apple.com/kb/HT4864

  • When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file"

    When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
    Win7 Pro, 64bit
    Acrobat XI Pro, tryal

    Create a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • Since installing OS X, I have not been able to use PrintMaster program. Is there a solution?

    Since installing OS X, I have not been able to use PrintMaster program. Is there any solution to the problem listed below:
    PrintMaster 2012 Platinum <4.0.0.230> encountered the following error:
    java.lang.reflect.InvocationTargetException
      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessor Impl.java:39)
      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructor AccessorImpl.java:27)
      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
      at com.storyrock.framework.Builder._main(SourceFile:211)
      at Application.main(SourceFile:17)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at apple.launcher.LaunchRunner.run(LaunchRunner.java:116)
      at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:51)
      at apple.launcher.JavaApplicationLauncher.launch(JavaApplicationLauncher.java:52)
    Caused by: java.lang.NoClassDefFoundError: quicktime/std/movies/Movie
      at com.storyrock.ui.TreeDialog.addContent(SourceFile:1127)
      at com.storyrock.framework.AppFrame.<init>(SourceFile:565)
      at com.storyrock.ui.TreeDialog.<init>(SourceFile:148)
      at Application.<init>(SourceFile:12)
      ... 13 more
    Caused by: java.lang.ClassNotFoundException: quicktime.std.movies.Movie
      at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
      at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
      ... 17 more
    If this situation persists, please visit the technical support website at http://www.printmasterpacks.com/support
    Is there a solution?

    Found the answer.  I wasted a bunch of time trying a whole bunch of different things like changing my security settings to allow apps from Everyone, turning off my firewall, downloading a newer Java, etc. 
    I finally contacted Printmaster support and they said that Printmaster 2012 Platinum (and ALL VERSIONS of Printmaster other than their newest one) will simply not work with Yosemite.  Even their newest one (called Printmaster V6 Platinum) won't work unless you download a fix.  Here is the entire response that they sent me.   I've had Printmaster 2012 Platinum for several years so it will cost me $10 and some effort (calling them AND sending an email with a photo of the box and disc...and then paying them) to get a version that will work.
    "Thank you for contacting Customer Support.
    Unfortunately with the release of Mac OSX 10.10 Yosemite PrintMaster is experiencing issues with this new operating system. We have created an update for PrintMaster v6 Platinum our current release of PrintMaster.
    We are pleased to let you know that the update for the Yosemite incompatibility is available as a download. Soon we will also have available on a DVD format. We are hoping to release the DVD format by the end of March, 2015.
    If the download is acceptable as a replacement, please contact our Customer Service team at 1-800-395-0277 between the hours of 8:00AM to 5:00PM CST, to order the download. Mention the case number in the subject of this email.  They will require proof of purchase, so please be ready with that information.  Continue reading for more detail.
    The following options are available to get the update to PrintMaster v6.
    If your purchase was within the last 90 days:
    Owners of PrintMaster 2012 or older can obtain a free download, or if you want the DVD shipped to you we will send the DVD for the cost of shipping (prices vary on your location – only within the US and Canada) as long as the program was purchased in the last 90 days with a receipt showing the purchase date.
    If you would like the download option, please send your request along with:
    Your mailing address and phone number.
    Copy of the receipt showing the purchase date to be under 90 days.
    We can then process a no charge download order to be sent to you via email. If you would like to have the DVD shipped to you please contact our Customer Service team at 1-800-395-0277 between the hours of 8:00AM to 5:00PM CST. If your purchase was more than 90 days ago:
    If the program was not purchased in the last 90 days, we can offer the download at the replacement cost of $10.00. If you want the DVD shipped to you the cost would be $10.00 plus shipping and handling (prices vary on your location – only within the US and Canada). Please contact our Customer Service team at 1-800-395-0277 between the hours of 8:00AM to 5:00PM CST to place the order.To receive this exchange, we require proof of purchase.
    Please provide your order number for purchases made directly from Encore.com or Broderbund.com.
    For purchases made other than at Encore.com or Broderbund.com please reply with the proof of purchase attached to a reply email. Proof of purchase can be a copy of the receipt or a copy of the front of the box and the disk.
    NOTE: We are unable to view images inserted into the body of the email, the file must be attached to the email for us to be able to view it."

Maybe you are looking for

  • Add User to Group Behavior

    Hi all I found this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this Active Directory Integration Pack. Everything works properly, except

  • SCCM 2012 R2 clients not being automatically 'Approved'

    We have a development SCCM 2012  R2 environment that consists of one server with the following roles: -Component Server -Distribution Point -Management point -Reporting services point -Site database server -Site server -Site system We're using this f

  • Texture problem with alpha channel

    [code] on createMySphere sr= p3d.newModelResource("mySphere01", #sphere) s = p3d.newModel("s", sr) s.transform.position = vector (0,0,0) s.shader = p3d.newShader("sShdr2", #standard) txS= p3d.newTexture("txS", #fromcastmember, member("image")) s.shad

  • Email archive accesible from iPad

    Hello! I am in search of a solution which would allow me to access from my iPad an archive (database) in which all my emails (from different accounts) can be imported and stored. I envision something like a Filemaker database on my Mac in which I imp

  • How do I create this effect in photoshop?

    http://www.debutart.com/illustration/ben-jennings/20225#/illustration-portfolio Not just this effect but pretty much the same effect he has running through his whole portfolio. Im assuming he uses textures and clipping masks? not too familiar with th