[Solved]Unable to boot /sbin/init does not exist.
When I boot, I get this message: ERROR: Root device mounted successfully, but /shin/init does not exist. This is an installation that was working fine for me before. I went into Windows to free up disk space, and when I booted Arch later, this is what came up. I have already tried using the live disk as a rescue, but I am unable to chroot into it. I have checked my partitions with a live disk and my files are still there. Is there any way that I can fix this without reinstalling Arch? I have a lot of things that I cannot reinstall right now as I don't have access to the internet currently, and I am using my phone to access the forum.
Last edited by LGG42 (2013-11-27 02:43:47)
My bootloader is Syslinux. Yes, I am able to mount the file systems. The partitions are in ext4 format. I boot from legacy BIOS, as I have had EFI problems in the past. arch-chroot gives me this: ==> ERROR: failed to setup API filesystems in chroot /mnt. I should have been clear about what I did in Windows. I was running out of space in Windows, and I had some unallocated disk space, and so I extended my Windows partition.
The output of frisk -l is:
Disk /dev/sda: 500.1 GB, 500107862016 sectors
Units = sectors of 1* 512
I/O size (minimum/optimal): 4096 Bytes/4096 bytes
disk label type: got
#1 start: 2048 End 821247 size 400M type windows recovery 2 start 821248 End 1353727 Size 260M type ms basic 3 start 874614784 End 916559871 Size 128M ms reserved 4 start 1615872 End 874614783 Size 416G ms basic. 5 start 874614784 End 91655781 Size 20G ms basic. 6 start 916561920 End 916756479 Size 95M type EFI system. 7 start 916758528 End 928495615 8 start 928495616 end 928499711 Size 2M type ms basic. 9 start 928499712 End 976773119 size 23G type ms basic. Sorry about the mess that is in. As a note, my / partition is #5, and my home is #9. Thank you for helping.
Similar Messages
-
[SOLVED]Will not boot: "/sbin/init does not exist...
There is another thread about this, but as of today (26-07-2013) it is 3 years old and Arch no longer uses sysvinit.
(https://bbs.archlinux.org/viewtopic.php?id=93197)
I tried re-installing systemd-sysvcompat, as that now handles /sbin/init, no luck.
Is there some skeleton init file I could copy/regenerate from somewhere?
NOTE: This is a new installation. Haven't booted cleanly yet
Last edited by drasticraft (2013-07-28 17:30:48)Any chance you have more than one drive attached? There are no guarantees as to which drive is mapped to sda and which is mapped to sdb.
If not that, from the shell into which you get dumped, go look around and see that /sbin is a link to /usr/bin.
You might also add an option to point at your init. (/usr/bin/init) It will make your option line look like:
options root=/dev/sda1 ro init=/usr/bin/init
Also, ensure that /usr/bin/init is linked to systemd. :
/sbin/init -> ../lib/systemd/systemd
I'll still wager that the filesystem upgrade went awry. -
[SOLVED] after upgrade : /sbin/init does not exist. Bailing out, ...
hi, after having upgraded today my archlinux, I cannot boot it. I get the following message : "ERROR: Root device mounted successfully, but /sbin/init does not exist. Bailing out, you are on you own. Good luck."
The last time the system was upgraded was in june 2013, before the "Binaries move to /usr/bin requiring update intervention" advisory (https://www.archlinux.org/news/binaries … ervention/). So before upgrading I followed the instructions given in this article and was able to upgrade. But after reboot I got the error message I'm reporting here.
Here is a copy of the config I'm using to boot arch in grub:
menuentry "Archlinux" {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
echo 'Loading of Archlinux, kernel v.3.xx.xx ...'
linux /boot/vmlinuz-linux root=/dev/sda7 ro
initrd /boot/initramfs-linux.img
Last edited by heavytull (2014-03-06 21:24:48)karol wrote:
There have been quite a few changes since you last updated e.g. we're using 'rw' instead of 'ro'. Try
linux /boot/vmlinuz-linux root=/dev/sda7 rw init=/usr/lib/systemd/systemd
It's now much better. But a lot of errors are reported and the system hangs, but still rebootable with Ctrl + Alt + Del.
Here are the error messages:
[FAILED] Failed to mount Configuration File System.
See 'systemctl status sys-kernel-config.mount' for details.
[FAILED] Failed to mount Huge Pages File System.
See 'systemctl status dev-hugepages.mount' for details.
[FAILED] Failed to mount POSIX Message Queue File System.
See 'systemctl status dev-mqueue.mount' for details.
[FAILED] Failed to mount Temporary Directory.
See 'systemctl status tmp.mount' for details.
[FAILED] Failed to start Remount Root and Kernel File System.
See 'systemctl status systemd-remount-fs.service' for details. -
Root device mounted successfully, but /sbin/init does not exist ???
I'm having the issue where when I boot after doing a fresh install, it gives me:
ERROR: Root device mounted successfully, but /sbin/init does not exist
Bailing out, you are on your own. Good luck
sh: can't access tty; job control turned off
[rootfs /]#
My fstab:
# /etc/fstab
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1 LABEL=homerroot
UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=homerboot
UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
# /dev/sda3 LABEL=homeretc
UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
# /dev/sda4 LABEL=homervar
UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda5 LABEL=homerusr
UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
# /dev/sda6 LABEL=home
UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda7 LABEL=public
UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
So I tried:
https://bbs.archlinux.org/viewtopic.php … 3#p1283343
I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
None of the other steps have any effect....
I also tried:
https://bbs.archlinux.org/viewtopic.php?id=172943
My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
And:
https://bbs.archlinux.org/viewtopic.php?id=166423
I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
Thanks in advance for your help guys!WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
WonderWoofy wrote:A separate /etc is not supported whatsoever. There needs to be initial access to a few things there. I'm sure it could be made to work with some initramfs hackery. But it is neither supported or wise to do so IMO.
I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works. -
[SOLVED] /sbin/init does not exist error on boot
Hi all,
Let me first say that Arch Linux is a great distribution and I couldn't be more happier with it! Thanks to everyone who is involved in building it.
However, as the subject line suggests, I have run into a problem. I have tried every trick in my book and every suggestion on Google but the problem still persists.
The setup
* UEFI boot loader on /dev/sda1
* BTRFS file system on /dev/sda2 in __active subvolume
* The system was installed in Jan using the latest install CD (I presume systemd changes were already applied)
The problem
Booting halts on rEFInd screen
What I have tried
Since the last pacman command upgraded git and kernel to 3.7.6-1 (this is not the first kernel upgrade on this system)my first idea was to rollback to 3.7.5-1 which results in /sbin/init not found error.
Re-installing 3.7.6-1 halts the system on rEFInd boot screen. I tried booting from rEFI shell and it results in the same /sbin/init not found error (on 3.7.6-1 kernel) so I presume that's the main issue here.
From there on (as suggested by various posts online) I have verified that rEFInd points to the correct root partition. Also, I've tried passing /bin/systemd explicitly but the error still persists.
I can boot into Live install environment and chroot into the setup on my drive. I have checked that /sbin/init exists (as well as /bin/systemd).
I am out of options here. Any help will be much appreciated.
Please let me know if you require any other information from me.
Last edited by clalbus (2013-02-10 20:59:42)OK, now that I have marked the __active subvolume as default I can boot (using EFI shell) without using the rootflags=subvol=__active kernel parameter.
However, rEFInd boot loader is still not working (with or without rootflags=subvol=__active). Unfortunately I don't see any error messages as the system hangs at rEFInd boot screen.
Here's my archlinux.nsh (that I use to boot through EFI shell):
echo -on
\EFI\arch\vmlinuz-arch.efi root=PARTUUID=626f545b-44f5-4a72-b1f3-d942fbcd0b46 ro rootfstype=btrfs add_efi_memmap systemd.unit=graphical.target initrd=\EFI\arch\initramfs-linux.img rootflags=subvol=__active
Here's my refind_linux.conf from (/boot/efi/EFI/arch)
"Boot with defaults" "root=PARTUUID=626f545b-44f5-4a72-b1f3-d942fbcd0b46 ro rootfstype=btrfs add_efi_memmap systemd.unit=graphical.target rootflags=subvol=__active"
"Boot to terminal" "root=PARTUUID=626f545b-44f5-4a72-b1f3-d942fbcd0b46 ro rootfstype=btrfs add_efi_memmap systemd.unit=multi-user.target rootflags=subvol=__active"
Any idea why booting through EFI shell would work but not through rEFInd?
Is it worthwhile rebuilding /boot? -
I followed steps on arch frontpage (I guess), but now my system can't boot. So i booted to newest arch cd and wanted to chroot to this installation and I can't.
# arch-chroot /mnt
chroot: failed to run command /bin/sh: No such file or directory
Yea, I mounted correct partition. Well, removing these dirs in root folder was kinda point of this update, wasn't it? If they were supposed to symlink, it did not happen. So I tried to symlink it myself and I did it in a way I could chroot to this installation (read: "I somehow did it but I'm not sure if I did it correctly as I am noob"), but step "pacman -Su" still throws these kind of errors:
"filesystem: /bin exists in filesystem"
What now?this thread helped me to solve my problem, which was very like the one described by OP.
after the confusion with files in /sbin etc. this was already the second time upgrades did not work and i had made my system unbootable.
i had created the mess myself, no need to go into that now.
upgrading 'filesystem' through arch live 'cd' was the key.
just 1 thing to add: when you boot into the live environment, make sure you connect to the internet first, i had problems with that once i had issued any kind of chroot command.
but really i wanted to leave my mark here because:
searching for answers, i read many threads about the current "/bin exists in filesystem" confusion, and they're quite full of sarcastic remarks and cryptic inside jokes, in a way i find off-putting.
would it have been such a bad thing if i had started another thread on this, after trying for hours, days, making matters worse than better, daring to ask a question that marks me as less experienced? many hardcore forum posters' remarks surely made me feel like that.
but, this thread is the positive example! all is not lost. thanks.
Last edited by ondoho (2013-06-06 15:01:39) -
How to solve "ORA-27101: shared memory realm does not exist"?
I met a prpblem as follows:
I'm getting the error whenever I try to start SQL*Plus:
ORA-27101: shared memory realm does not exist? so I can run SQLPLUS hrs before, but now cannot. why?
I attached my Listener.ora below, please find any error?:
# LISTENER.ORA Network Configuration File: C:\Oracle\817\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = con02)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = con02)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\817)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = tibco)
(ORACLE_HOME = C:\Oracle\817)
(SID_NAME = tibco)
I type following in command console,
c:\>echo $ORACLE_SID
$ORACLE_SID
c:\>echo $ORACLE_HOME
$ORACLE_HOME
c:\>
Please advise how to.
Thanksyour shareable memory area is not set for the oracle server. I think you install the server by using the command
# echo 500m > /proc/sys/kernel/shmmax
this command temporaryley increase the area not for permanent.
so edit the file which is /etc/sysctl.conf and change this parameter "kernel.shmmax=536870912" and then reboot your system and start the oracle.
If reboot is not an option the use this command to increase the required area.
#echo 536870912 > /proc/sys/kernel/shmmax
and then run the oracle. -
[SOLVED] Unable to Boot Windows 7 from GRUB
I recently reinstalled Arch onto my laptop (Lenovo Thinkpad t520) and have been having problems with Grub. For the last week I've been having trouble getting it to run grub at boot at all, only being able to run windows 7 by flagging it as the bootable drive. The other day I finally got it to boot into grub, and from grub I can boot into Arch. However, I can not boot into windows 7 through grub. When I attempt to, it throws an error:
Invalid EFI file path
I'm somewhat new to arch, and especially new to efi bootloading and such. Right now the only way I can get into windows is either booting from the arch install disk > boot other os and specifying partition 2 (where I have windows installed) or by pressing f12 at boot. When I do this (not sure what the term is, if anyone knows please tell me), it brings up a menu asking where I want to boot with "arch_efi" "cd drive" "Hard drive" etc. I choose hard drive and it will then boot to windows by default. Booting normally takes me to grub where I can boot into arch but not windows. If there's any more info you need please let me know and I'll try to provide it. Thanks in advance.
Also, here is my current partition setup
/dev/sda1 /boot/efi
/dev/sda2 Windows7
/dev/sda3 Extended partition containing sda 5,6, & 7
/dev/sda4 swap
/dev/sda5 /boot
/dev/sda6 /
/dev/sda7 /home
UPDATE
Terminator seems to be right (still on a roll!), so I wiped the partition I had grub on, removed grub, and installed syslinux. Now I have another problem that I'm hoping can be solved in the same thread to avoid another. It boots to syslinux no problem, and I can boot to windows from there all good, but when I select arch I get:
Root device mounted successfully but /sbin/init does not exist
I haven't been able to look for solutions too much on my own, but any help would be appreciated, thank you.
Last edited by IamFuzzles (2012-08-22 04:20:56)Terminator wrote:If I understand it correctly, what you are trying is impossible: you are trying to boot windows using UEFI on a disk with MBR partitioning. Windows 7 only supports UEFI on discs with GPT partitioning but AFAIK, extended partitions only exist in MBR partitioning.
i also saw this in the arch wiki, but i have a brand new lenovo ideapad y570 running windows 7 64-bit that i'm in the process of setting up for someone, and it has what i think is an efi system partition but the disk uses mbr partitioning. does anyone know why this might be, or is there a way i can verify that the system is actually being booted via bios-mbr?
Last edited by e_tank (2012-08-21 11:56:15) -
[SOLVED] Unable to boot after CLI shutdown
Fresh install Archlinux (3.8.4-1-ARCH) + KDE
From KDE console, I did a shutdown with the following command
# shutdown -h -P now
I observed the following messages on the screen (no errors apparently):
[ OK ] Stopped Getty on tty1.
[ OK ] Stopped K Display Manager.
Stopping Permit User Sessions...
[ OK ] Stopped /etc/netctl/wireless generated by archboot setup.
[ OK ] Stopped Permit User Sessions.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Sockets.
[ OK ] Closed LVM2 medatada daemon socket.
[ OK ] Closed Device-mapper event daemon FIFOs.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Stopped target System Initialization.
Stopping Setup Virtual Console...
[ OK ] Stopped Setup Virtual Console.
[ OK ] Stopped target Encrypted Volumes.
Stopping Apply Kernel Variables...
[ OK ] Stopped Apply Kernel Variables.
Stopping Load Kernel Modules...
[ OK ] Stopped Load Kernel Modules.
[ OK ] Stopped target Swap.
[ OK ] Deactivated swap /dev/disk/by-uuid/1f32953-22b4-4591-8f0d-e1a41e33015b.
[ OK ] Stopped target Local File Systems.
Unmounting /boot...
Unmounting /home...
Unmounting Temporary Directory...
[ OK ] Stopped target Remote File Systems
[ OK ] Failed unmounting /boot.
[ OK ] Failed unmounting /home.
[ OK ] Failed unmounting Temporary Directory.
[ OK ] Stopped target Local File Systems (Pre).
Stopping Remount Root and Kernel File Systems...
[ OK ] Stopped Remount Root and Kernel File Systems.
Starting Save Random Seed...
Starting Update UTMP about System Shutdown.
[ OK ] Reached target Shutdown.
But the PC does not power off, it hangs at the last message and I had to press the power off button.
When I started the PC again I got plenty of errors of type “failed to mount /boot “, “Dependency failed for local file systems” and so on.
Then, I boot from CD and changed root to try to mount the existing partitions of my HD:
/dev/sda1 --> boot
/dev/sda2 --> swap
/dev/sda3 --> root
/dev/sda4 --> home
Partitions were successfully mounted
What I did next was to install again the bootloader (syslinux) and try to reboot the system
This time I got the following boot sequence:
Booting the kernel
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [keymap]
:: Loading keymap...done.
:: performing fsck on ‘/dev/sda3’
ROOT_ARCH: clean, 161613/3203072 files, 1465739/12800000 blocks
:: mounting ‘/dev/sda3’ on real root
:: running cleanup hook [udev]
ERROR: Root device mounted successfully, but /sbin/init does not exist.
Bailing out, you are on your own. Good luck.
sh: can’t access tty; job control turned off
[rootfs /] #
And the cursor gets stuck at the rootfs promtpt, no chance to type anything ...
I’ve googled for this error and came up with this link: https://bbs.archlinux.org/viewtopic.php?id=146388
But editing the kernel parameters as stated in the link did not fix my problem, it just brought me back to the situation where it failed to mount the local filesystems
I installed archlinux & KDE from scratch again . But performing a CLI shutdown got me into the very same problem again ....
I’ve revised the mkinitcpio.conf and I seem to have all the hooks (using the default config by the way). ¿Could be related to KDE?
No idea how to proceed now.
EDIT: corrected typos
Last edited by cortezthekiller (2013-09-17 21:58:10)jasonwryan wrote:
Should it matter? Not really. There is this:
man shutdown wrote:NOTES
This is a legacy command available for compatibility only.
Yes:
$ pacman -Ql systemd-sysvcompat
systemd-sysvcompat /usr/
systemd-sysvcompat /usr/bin/
systemd-sysvcompat /usr/bin/halt
systemd-sysvcompat /usr/bin/init
systemd-sysvcompat /usr/bin/poweroff
systemd-sysvcompat /usr/bin/reboot
systemd-sysvcompat /usr/bin/runlevel
systemd-sysvcompat /usr/bin/shutdown
systemd-sysvcompat /usr/bin/telinit
There are all the old sysv commands, symlinked to systemd.
Last edited by headkase (2013-09-16 08:53:41) -
/grub/pxegrub does not exist, invalid boot image
hi all
i'm having a small prob when trying to jumpstart an x86 client, with my sparc server.
any help ?
i think it's simple, i have to install x86 bootfiles on the server, or something, but how to do that ?
thanks
here's my error in detail :
[599][root@srv-parnode2][Tools]> ./add_install_client \
-d \
-e 00:e0:81:58:af:c8 \ -s 10.211.0.2:/DATA2/export/jumpstart/install \
-s 10.211.0.2:/DATA2/export/jumpstart/install \
-c 10.211.0.2:/DATA2/export/jumpstart/config \
-p 10.211.0.2:/DATA2/export/jumpstart/config i86pcadd_install_client: /DATA2/export/jumpstart/install/boot/grub/pxegrub does not exist, invalid boot image
[601][root@srv-parnode2][Tools]>nm, i found my prob, you can close the thread :)
-
SOLVED: Mounting IDE ZIP Drives, "Special Device hdb4 Does Not Exist"
I thought I would post a follow-up, since I have finally resolved this long standing issue, which has plagued me since my first days with Linux many years ago.
As outlined in my original post below, every time I would attempt to access a Zip disk for the first time since boot, Linux (pretty much all distros I have ever tried, with the exception of SuSE 9.3) would fail to mount the disk and report back that "Special device hdb4 does not exist". Of course the "hdb4" part varies from distro to distro and machine to machine, depending on how your Zip disk is connected and how the distro names its disks, but the basic error has been constant. I have always worked around it by redoing the mount command specifying just the device, not the partition, and while that would always fail, it would force the creation of the device /dev/hdb4, and I could carry on. Annoying but effective.
FINALLY, a long term answer. I got my inspiration from a really snarky post I read in another online forum where someone had posted this very same question (this is a very common problem with no common answer it seems!). The respondant, who completely failed to provide a helpful answer, basically said "listen, the OS is telling you what is wrong - the device hdb4 doesn't exist - so fix it, and all will be just fine". Of course, the respondant didn't even bother to offer a suggestion about HOW to fix it.
However, therein lies the inspiration for the solution. Indeed they are right, /dev/hdb4 *doesn't* exist, so how to fix that? They had a point. I started researching the mysteries of mknod, a program that can create /dev files, and the even deeper mysteries of Linux device numbers, both major and minor.
In the end, I found a wonderfully informative document that described the current standard for the device numbering scheme used by mknod, and Linux in general. The key things of interest are this:
1/ The major number for IDE based drives is 3.
2/ IDE allows for 64 partitions per device, so the minor numbers are 0-63 for device "a", 64-127 for device "b" and so on. You derive the minor number of interest for your particular device by taking the starting value of the minor number range of interest for your device and adding the partition number to it. So, for example, hdb4 would have a minor number of 64 (the start of the minor number range for device "b") plus 4 (the partition number in "hdb4"), yielding a result of 68.
3/ The major number for SCSI based drives, or those that your OS treats as SCSI, is 8.
4/ SCSI allows for 16 partitions per device, so the minor numbers are 0-15 for device "a", 16-31 for device "b" and so on. You derive the minor number of interest for your particular device by taking the starting value of the minor number range of interest for your device and adding the partition number to it. So, for example, sdb4 would have a minor number of 16 (the start of the minor number range for device "b") plus 4 (the partition number in "hdb4"), yielding a result of 20.
In my case, Arch seems to be treating all of my disk based devices as SCSI, perhaps because I do have a real SCSI interfaced Jaz drive in my machine. So, the Zip disk of interest in my machine is sdc4 (my real SCSI jaz is sda, my Arch root is sdb, and the IDE Zip is sdc). Applying the above, for /dev/sdc4:
- The major number is 8.
- The minor number is 32 (start of range for device "c") plus 4 (the partition number) = 36.
Armed with this knowledge, I su'd to root and entered:
# mknod /dev/sdc4 b 8 36
and like magic, there is was, /dev/sdc4. I popped a disk into the drive and my first attempt to access it was greeted with success, not the usual "device does not exist" error! By the way, the "b" in the above command is just part of the mknod syntax, and indicates that I am creating a block device (vs. a character device, or some other type of device - disk drives all seem to be "block" devices for apparent reasons).
SO, determine your major number by device type (it will usually be 3 or 8), compute your minor number by device letter and partition number, and add a mknod command to your system startup (so you don't have to do it manually every time) and you are done! No more annoying "device does not exist" errors.
Now for the kicker. It turns out that this information has been available under my nose all along. I just didn't recognize the code. If you do the following:
# ls -ald /dev/sd*
Linux obligingly provides you with the major number and the start of the minor number range for your device. Since Linux has always detected the Zip *device* (just not the partition) this is really all you need to know. When I issue the above command, I get an output like:
brw-rw---- 1 root disk 8, 32 date time /dev/sdc
Guess what, there they are! "8" is the major number of interest, "32" is the start of the minor number range of interest. If I had just recognized that, and known that all I had to do was add the partition number to the minor number to get the magic number to feed into mknod, things would have been easier.
Sorry for the long post, but like so many things in Linux, the OS doesn't make this easy on the uninitiated. I sincerely hope that this post may help lots of other people to resolve this vexing and longstanding problem.Solved!
See the lengthy response in this post:
http://bbs.archlinux.org/viewtopic.php?id=36468
I posted the solution separately, with the most informative title I could come up with, so that others Googling this topic on the web may hopefully easily find it. -
[SOLVED] PowerDNS (pdns) - SQLite database '...' does not exist yet
PowerDNS 3.2-5 is having some issues connecting to my backend database (sqlite3).
beta powerdns # tail /var/log/errors.log
May 7 20:12:41 localhost pdns[19098]: Caught an exception instantiating a backend: Unable to launch gsqlite3 connection: SQLite database '/etc/powerdns/database.sqlite' does not exist yet
But when i do:
beta powerdns # sqlite3 /etc/powerdns/database.sqlite
SQLite version 3.7.16.2 2013-04-12 11:52:43
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
sqlite> select * from domains;
1|<myhostname>|||NATIVE||
sqlite>
sqlite3 It fetches the records and domains to my liking but not PowerDNS.
Same thing goes for a blank db without any domains or records, i can query it but not PowerDNS.
Followed this guide in order to setup the proper tables and columns: http://doc.powerdns.com/html/gsqlite.html#idp9379264
(without the DNSSEC part, i'll give that a go later on)
It obviously loads the sqlite3 module, and tries to connect to the backend, which doesn't work, so the ArchLinux package is fine i'm guessing.
More info:
* Link to package: https://www.archlinux.org/packages/comm … 6_64/pdns/
* chmod == 777
* chown == nobody:nobody (and tried root:root as default)
* running as root (not pdns)
Last edited by Torxed (2013-05-08 10:52:05)Solved it.
The guides are vague in this regard but once you've just read the config twice you'll understand the logic.
First of all, no absolute paths for sqlite3, it should be:
launch=gsqlite3
gsqlite3-database=database.sqlite
Secondly, find your chroot, and point it to your database location or put your database here (whichever):
chroot=/var/empty
The folder structure should be:
/var/empty/database.sqlite
And this py pointing to ./database.sqlite when starting sqlite3 in pdns, it should be able to lock on to the database.
Peachy! -
Boot image does not exist and cannot read disk label errors.
Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
ThanksHi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.
-
[Solved] Error : The file or folder path /Probl?me 1 does not exist
Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders. -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de
Maybe you are looking for
-
How can I get my downloads folder to appear in the docking station
How can I get the download folder to remain on the docking station
-
How do I apply renamed display profiles in Display Preferences?
Can someone tell me how I get my renamed colour profiles to show with their new names in Display Preferences? After creating new profiles when calibrating my monitor, I discovered that because the applied profile names were too long to show up in the
-
Need help to Modify the STD report which uses the Tcode CATS_DA.
Hi , we have a requirement as below. we need Add two Additional Fileds in the OutPut of the Std Report ( Tcode CATS_DA) .( 2 fileds are one is Managername /Manager employee number ) .. Can you Please where we need to Modify the code to meet the abov
-
Manged device at the client, but not shown in ZCM
How is (was) it possible that I have have a ZCM agent that is receiving bundles, shows Managed, and otherwise looking healthy, but is not found anywhere in ZCC? maint-zcm.jpg In the workstation folder, I've done a wildcard search and it's nowhere to
-
I've got a Adobe-ID yesterday, and have tried to download a trial copy of Adobe Lightroom, but I always receive a webpage that says that you (Adobe) have a problem. What's the problem, and when could I expect it to be solved? Thanks Lars, Sweden