Spreadsheet Component issues

I have dashboard using spreadsheet component placed on top of panel contianer. I am using spreadsheet component just to display the data, not used as a selector. During the run time I am seeing that values in the spreadsheet component lay one over each other when I do the scrolling on the panel container. I have also seen some values in the top row and first column disappear but when click on the cell they apprear back. These issues are intermittent does not happen always
Has anyone sees issues like this.

Issues resolved after I upgarded the flash player from 10.1.45 to 10.1.102
Thanks

Similar Messages

  • Spreadsheet component - bottom grid line not displaying in swf file

    Hi,
    I'm having an issue with the spreadsheet component. I'm using the "Ignore blank cells in Values" option on the behavior tab. This works fine. The problem I'm having is the bottom grid line in the spreadsheet table is not displaying in the swf file. The bottom grid line displays correctly in Preview mode....but is not displaying in the swf file. Anyone have any ideas on why?
    Thanks

    I'm not sure if I've interpreted your response correctly.  Our entire dashboard app is built on the swf files being called from the URL buttons.  We are not using HTML files.  Are you saying that if I do a file export to HTML that the swf file generated from this will display the bottom grid lines?
    I noticed that the spreadsheet component grid lines display correctly in the swf when not checking the ignore blank cells option in the behavior tab.
    So what would be our options here.....either uncheck the display grid lines for the spreadsheet component to not display the grid lines at all, or do not use the ignore blank cells option in the behavior tab to display a fixed number of rows each time?
    Thanks for the response, Matt.

  • Spreadsheet component shrinks to size of a Dice

    Hello,
    I have a dynamic dashboard using spread sheet component. During the run time I have seen the spreadsheet component  shrinks to a very small size, I could say it shrinks to size of a dice and this issue is very intermittent.
    FYI: I am having the option ignore blanks at the end of the range enabled for both columns and rows.
    Has anyone seen issue like this?
    Thanks

    I have the spreadsheet component placed on top of panel container, I have dynamic visibilty for both panel container and spreadsheet component, I see that there are issues with DV(dynamic visibilty) where the components placed in the panel containers are not inherting the DV from the panel container. my spreedsheet component was binded to cell range where the bottom rows have excel formula, originally I had ignore blanks at the end of row enabled, once I disabled that It started working without any issues.
    Edited by: naninet8 on Dec 16, 2010 2:20 AM

  • SQL Spreadsheet  Component  problems

    We've encountered some strange behavior while using the SQL Spreadsheet Component within a report:a) Most of the time the SQL-GENERATOR does not generate any SQL. The SQL written by us works fine, but is not accepted by the SQL-Generator e.g. entering first an SQL command and than pressing the SQL-Generator button will raise an Error invalid SQL statement, but the statement as such is correct and returns the values.b) We are not able to create an SQL-Kombinationsfeld (German name for the Drop-Down List). We are able to select the Datasource, the SQL table we previously defined, but than an error is raised 'Keine verfügbare Spalten' = 'No available columns'Had anyone of you encountered similar problems and especially was able to solve them? Any help is more than appreciatedRobert

    Sorry I forgot to mention our Analyzer instalation:Version: 6.5.1.0.00937Class Version: Java HotSpot(TM) Client VMVM Version: Java HotSpot(TM) Client VMVM Vendor: Sun Microsystems Inc.Java Vendor: Sun Microsystems Inc.Java Version: 1.3.1_02OS Name: Windows 2000OS Version: 5.0Total Memory: 133955584Free Memory: 12507072Locale: English (United States)Client-InformationenVersion: 6.5.1.0.00937Class Version: Java HotSpot(TM) Client VMVM Version: Java HotSpot(TM) Client VMVM Vendor: Sun Microsystems Inc.Java Vendor: Sun Microsystems Inc.Java Version: 1.3.0_02OS Name: Windows 2000OS Version: 5.1Total Memory: 25714688Free Memory: 10004480Locale: Deutsch (Deutschland)

  • Custom component issue

    Custom component issue
    According to customer requirements, we want to get such an effect in the development of custom components:
    Drag and drop custom components to the Flex builder work area, it can generate more than the default properties, not just generate "x", "y" attribute.
    【Details are as follows】
    We design a custom panel "CustomPanel.mxml" in the project development, then drag it into the workspace in the Flex builder development environment.
    View the source code found that it can only generate "x", "y" attribute in default. That is:
    <ns2:CustomPanel x="105" y="74">
    </ns2:CustomPanel>
    【Issue】
    How can we do that when drag the 'custom component' into Flex builder workspace,  we can generate "layout" attribute in addition to "x", "y" attributes?
    That is:
    <ns2:CustomPanel x="105" y="74" layout="absolute">
    </ns2:CustomPanel>
    【Note】
    The following code will be generated when the "panel component comes with Flex builder environment" is dragged into workspace.
    <mx:Panel x="121" y="134" width="250" height="200" layout="absolute">
    </mx:Panel>
    How it is done?

    I am sorry to bother you again.
    I have tried the web site content, but it can't helped!
    There is a custom component called 'Basket', source code is as follows:
    package picnic
    import mx.containers.Panel;
    public class Basket extends Panel
      public function Basket()
       super();
       layout = "vertical";
       setStyle("backgroundColor", 0x00FFFF);
       setStyle("horizontalAlign", "center");
    Here it is worked when the attribute "layout" is set to "vertical", but it isn't when "layout" is set to "absolute" !
    When the property is set to "absolute" phenomenon is as follows:
    Drag component such as 'Button' into "picnic component". It will automatically go to the top left corner position,
    just like the 'layout-attribute' is not set.
    Why is there such a phenomenon?

  • Spreadsheet component

    Hello,
    I am wondering if the forum could recommend me a few spreadsheet like components for Flex. This can be either open source (preferably) or commercial. We just need a simple spreadsheet inside our application where user can modify matrix data easily.
    Thanks,
    Suriyanto

    I'm not sure if I've interpreted your response correctly.  Our entire dashboard app is built on the swf files being called from the URL buttons.  We are not using HTML files.  Are you saying that if I do a file export to HTML that the swf file generated from this will display the bottom grid lines?
    I noticed that the spreadsheet component grid lines display correctly in the swf when not checking the ignore blank cells option in the behavior tab.
    So what would be our options here.....either uncheck the display grid lines for the spreadsheet component to not display the grid lines at all, or do not use the ignore blank cells option in the behavior tab to display a fixed number of rows each time?
    Thanks for the response, Matt.

  • Subcontracting Component  Issue Error

    HI,
    i am creating Sub contracting Purchase order.component qty is issued for unlimited, accepted for PO.
    my option is Po Parent qty against Component issued Excess qty not Allowed.
    Purchase Order Qty A: 100Pc
    Child Qty               B : 100PC
    Issued qty             B :150 Pc is Allowed.
    this Child qty are maintained for BOM.
    Plz, Explain and Advise the Issue.
    By,
    Jeevan

    Dear,
    You can not issue the quanity more than the BOM component quantity with respective to the PO.
    Transaction ME2O uses the component quantities from the individual purchase order items. However, it does not set up a stock based on purchase orders (POs). The system therefore does not assign POs directly to quantities either. The evaluation of the SC stock is therefore always a cumulative analysis of all the requirements of a material over time. The "Closing Stock" for each material displays whether there is excess stock or a stock undercoverage at that time, or whether requirements and stock are balanced.
    You can set up the SC stock with larger quantities than component requirements exist at that time. This option is often used if, for example, you want to set up buffer stocks for the subcontractor for subcontracting works that frequently recur.
    Hop clear to you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 19, 2009 12:26 PM

  • Negative Component Issue

    Hi
    It is mentioned in the oracle inventory management material that There are different ways we can receive inventory in to stock: for instance from manufacturing shop floors by :
    - Component Return
    - Negative Component Issue
    - Assembly Return
    My question is:
    what is "Negative Component Issue" ? and how could it be performed?
    Thanks
    Walid

    HI,
    negative component issue is used to issue negative components from job to inventory.
    they are normally used in denoting by products that are produced in a job when performing a job, and usually by products are returned to inv from job.
    so negative component issue type is used.
    is it clear?

  • SAP R/3 application component issue

    Hi all,
    My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
    Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
    So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
    Regards,
    Prabhakar.

    Hi Markus,
    This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
    So please suggest me the approach to resolve this issue.
    Regards,
    Prabhakar.

  • Ibase/Component issue while creating a message from satillite system

    Hi experts,
    we have implemented the service desk functionality in solution manager system.
    User is able to create message in solution manager directly.
    While creating message from a satellite system IBASE/component fields are filled with incorrect values.
    Because of this user unable to create message from satillite system.
    Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
    Thank you in advance,
    Babu

    Hi  Babu,
    For Creating messages in SOLMAN make sure that in T code SM30  under the table BCOS_CUST data is maitained
    OSS_MSG     W     NONE     CUST620     1.0
    First your should make your solman ready for posting issues within.
    Then connect it to ECC systems and try posting issues there.
    Do not user Tcode NOTIF_CREATE for posting issues  always use HELP- Create Support message.
    Thanks
    Nand

  • LOADER COMPONENT ISSUE

    I noticed that when using the Loader component in Flash 8 -
    the following issue:
    I have a thumbnail gallery that uses the Loader component to
    view the large image.
    when i view the site in fire fox it works perfectly (scaling
    the content and centering it within the loader component shape)
    but when i view it in IE - no scaling or centering occurs!!??
    any idea why this is happening and how i can rectify
    it?

    Hey why don't you try adjusting the permissions and hot
    linking protection on your servers control panel? This might be the
    problem.

  • Import Fail crm 2011 to crm 2013 Legacy component issue

    Hi All
    We are getting issues during organization import from crm 2011 to crm 2013 , the error is 
    "We have detected the presence of legacy component(s) during upgrade, these components are not supported in Dynamics CRM 2013. Please refer to upgrade log file C:\Users\Administrator\AppData\Roaming\Microsoft\MSCRM\Logs\LegacyFeatureCheck.xml
    for more information."
    when we check log file it shows the error "ISV folder under CRM Website contains one or more files"
    Even we removed everything from ISV folder , Iframe urls from app , solution which is using ISV urls ,plugins and custom workflows but still the error is same
    Please help to resolve this issue .
    Thank you
    Sharique

    Hi,
    Please refer below blog having details about "Removal of the 2007 Endpoint and Legacy Features"
    http://blog.simonjackson.info/2013/07/whats-changing-in-crm-2013-from-sdk.html
    The following legacy Microsoft Dynamics CRM 4.0 features will be removed or will no longer be supported in the next major product release:
    ISV folder support for custom web applications
    Microsoft Dynamics CRM 4.0 plug-ins
    Microsoft Dynamics CRM 4.0 client-side scripting
    Microsoft Dynamics CRM 4.0 custom workflow activities
    Also you can download a tool that can detect legacy feature on your server
    http://go.microsoft.com/fwlink/p/?LinkID=309565
    Entire documentation is available at below article.
    http://msdn.microsoft.com/en-us/library/dn281891.aspx
    Hope this helps.
    Ajay Chawla

  • Mass reversal of one component issued  to many production orders

    Hello SAP GURUS
    One of the common component is issued  to many production orders from wrong storage location ie instead of 0002  storage location it got issued from storage location0001,
    Is there any way to mass reverse of this common component  that got issued to multiple production orders
    Thanks & Regards
    Himakar Raigir

    Dear Himakar,
    In my understanding,There is no standard T Code to do this mass reversal.
    But in MIGO/MB1A you can do 262 movement to the same storage location from which it was consumed for one single
    production order if required or else you have to cancel all the documents using MBST.
    Check and revert
    Regards
    S Mangalraj

  • Operation subcontracting - excess component issue to vendor

    Hi gurus,
    Operation subcontracting
    Issue of component to operation subcontractor with excess material.
    After goods receipt from subcontracting what is the impact at subcontractor vendor stock , costing and financial for excess issue stock.
    example
    As per BOM component qty (suppose to issue) is                10
    After altering in PO issue component qty will be issued          15
    At the time of receivable of subcontracting (GRN) where and what is the status of 5 qty?
    Regards,
    RAM

    Do MB1B - Matl Movement Type  - 542 w.ref. to  P.O(excess 5 qty).
    Check stock of subcon. using MBLB.

  • Jdev 10.1.2 Add Business Component Issue

    Error appearing is "Unable to load Business Components. The package xml file is not in the proper package".
    Under Jdev 9.0.5.2 you could create a business component then with that item highlighted select 'x' on the navigator toolbar to remove the Business Component from the project (Not erased). To add the same item back into the project you highlighted the package, selected '+' on the navigator toolbar highlighted the Business Component source files then click open then yes.
    Under JDev 10.1.2.0.0 doing the same does not work. The business component is correctly removed from the project but there seems to be no way to add it back to the project/package (error above always appears).
    Has anybody else seen this issue ?
    I am mid-way through a major schema refactor and this is causing a big problem.

    Based on the package (see FullName below), the metadata file would be called package.xml in this case.
    It is there the Containee entries would be added.
    For an Entity Object
    <Containee
    Name="YourEntityObject"
    FullName="com.site.package.YourEntityObject"
    ObjectType="Entity" >
    </Containee>
    For a View Object
    <Containee
    Name="YourViewObject"
    FullName="com.site.package.YourViewObject"
    ObjectType="ViewObject" >
    </Containee>
    where
    YourEntityObject
    - Name of the entity object business component to be added
    (This may be based on a number of seperate files such as YourEntityObject.xml, YourEntityObject.java, YourEntityObjectRow.java etc, depending on options taken at design time).
    YourViewObject
    - Name of the view object business component to be added
    (This may be based on a number of seperate files such as YourViewObject.xml, YourViewObject.java, YourViewObjectRow.java etc, depending on options taken at design time).

Maybe you are looking for