SUT selection in TO from storage type to PSA

Hi All,
The business process is Kanban replenishment where the CCID is scanned for TR creation for demand. TR then automatically converting to TO (movement type- 350). In TO we are getting the storage Unit type selected. need to know the basis of storage unit type selection.
Further details of the movement as eg.
Movement is from storage Type 030 to PSA.
Storage Type 030 has Bulk as Put away strategy and FiFo as Removal Strategy.
It is SUT check active.
warehouse is HU and SU managed.
Two kinds of SUT is there in the storage type 030 - Box and Pallet (L).
Let me know the basis of SUT selection in above TO.
The issue is that different material selects different SUT and there is no consistency. I checked for GR date, Quants, and material master, Move,ment Type data.
Need help from all experts.
Thanks,
Shankar Kumar

Hi Shankar,
As per standard SAP flow,
Step 1 ) system picks the stock removal indicator from the WM1 view of material master
Step 2) Picks the storage type from the T334T table based on the removal indicator from step1
Step 3) Once the storage type selected it goes and check the available Quant in the storage type
Step 4) After selection of all the Quant it sorts the selected record based on the GR date
Step 5) Once the first quant selected it pass all the Quant information to internal table
Step 6) Checks the required quantity minus quantity of first quant selected if the balance is greater then zero process continue from step 2 till the time required quantity - allocated quantity =0
Now your query how system selects the Storage unit type, as you can see from above steps system selects the  Quant and the quant is already having the Storage unit type assigned. in the below example i have four quant in the stock and my requirement is for 120 PC, you can see the Sequence in Transfer order system stamps the TO line item based on the Storage type search (003,002 in below case) and then based on ascending order of Goods receipt  it selects the Quant from within the Storage unit
in the below example
Storage type search strategy (Entry into T334T)
Stock in warehouse

Similar Messages

  • RE: Transferring stock from storage type A to storage type B

    what movement can I used in WMS to move stock from storage type A to storage type B for replenishment?
    Bye

    Hi ..
    I think for replenishments standard movement type is 319 .
    You need to assign storage type with this movement type.
    Run Lp22 or Lp24 to generate replenishment .
    If its one time activity you can use LT10 with movement  999 to transfer from one storage type to another.
    Hope it helps
    Jinoy

  • Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01

    Hi,
    I am trying to automate the confirmation of transfer orders between storage type W01 and S01 using a 999 movement type. The 999 movement type appears to work perfectly when doing a bin to bin movement within the W01 storage type (for example move batch abc from bin 01 to bin 02) no confirmations are required. However if I transfer from a bin in W01 storage type to the S01 storage type (which only has a single bin to represent a staging area) a manual confirmation of the transfer order is required via lt24 or lt12. It appears therefore that the issue is with the storage type S01 for this particular Warehouse. The setting to confirm the TO immediately is already activated for movt 999 in customizing, is there a setting for the storage type that must be defined.
    Regards,

    F1 help for field V_T333-SQUIT:
    Means that the transfer order item can be confirmed immediately during the creation procedure.
    SAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
    To set the confirmation requirement for foreground processing, select the indicator for TO item can be confirmed immediately.
    As per my understanding the immediate confirmation indicator does not mean that the transfer order will be confirmed immediately. It makes possible that during the creation of transfer order you CAN put a flag in the confirmation checkbox.
    If you use it together with "propose confirmation" flag (setting for WM movement type; V_T333-VQUIT), the falg in confirmation check box will be populated automatically during TO creation.
    Edited by: Csaba Szommer on May 10, 2011 11:22 AM

  • TO is automatically created from storage type 501 to 200

    Hi Guys,
    The system created a TO from 501 direct to 200, without sending it to the racks.
    Can someone please help.
    Regards
    Silas

    Hi Silas
    Check the config,  Storage type search sequence for Picking.
    501(GRA) is defined as a picking storage type. so system create a Transfer order 501 to 200.
    Regards
    Manish

  • SUT Error at TO Creation from Non-SU to SU managed Storage type

    Hi
    I am creating TO to move quants from Non-SU Manged Storage type to SU managed Storage type, but at first its giving error saying Enter SUT for storage type.  These Non-SU managed Storage types are not having SUT Check but SU Managed storage type is having SUT Check.
    I tried to update WM view-2 with SUT and palletization but still issue exists.
    I am having batch job for RLAUTA10 where TR is converted to TO but due to above issue , this batch job is getting failed.
    I am deseperately trying to find the root cause and fix this asap.  Let me know how this issue can be resolved??
    Thanks

    Like I mentioned earlier in my posts, SU's are typically not managed in interim storage types. Apparently, in this case, the PSA is an SU managed location and you are trying to move inventory from a non-SU ST to SU PSA ST. The isse that you are encountering is due to the reason that the palletization data maintained in the material master is defaulted during receipts rather than staging therefore, the SUT field in the TR remains blank. But, due to business reasons you are using SU's in PSA's then you'd have to venture into development options to include SU types during automatic converion of staging TRs into TOs.

  • Block 921 storage type from allowing negative values

    Dear all,
    i am administrating mySAP and i have a problem that the users have to do bin to bin transfer using the code LT01 which will allow them to post from storage type 921 and leaving the quantity in negative i tried to block the hole storage type for the users but they also need to use the code LT10 for processing storage location transfer now i am stuck can someone give a work around for bin to bin transfer other than LT01 or how to block storage type 921 from allowing negative values to be posted
    thanks

    Dear  Ibrahim,
    Pls chect the blocking reasons:
    Path:- Logistics Execution - Warehouse Management - Master Data - Storage Bins - Define Blocking Reasons
    With regards,
    B.Ravindranath

  • Batch Determination in SD - Fixed Storage Type

    Hi,
    We have enable automatic batch determination at the delivery stage (VL01N). for example:
    Plant: 1000
    Storage Location: 3000
    Warehouse number: 300
    Storage type in warehouse number 300: 910,911,912, NF1, NF2, NF3
    In SD batch determination process in some cases batch are select from storage type 910 or 912 or NF1 (depend on unrestricted use), how to configure in SD batch determination configuration for always select batch´s from fixed storage type (in this case NF1 or NF2 or NF3).
    Regards,
    Enrique Figueroa
    Edited by: Benito Enrique Figueroa Flores on Sep 30, 2008 11:46 PM

    Nice idea, but what is your plan if no other batch is there, and all stock is in the interim storage type?
    From my point of view it does not really matter where the process flow stucks, if you wait for batch assignment in delivery until the batch is in its real bin or if you do the assignment right away and the creation of WM-TO stucks until the quant is moved from the interim storage type to its final bin.
    You just have to understand that batch determination and source bin determination serves usually different needs.
    I usually search for a by certain quality figures to meet my customers requirement. Or by age,  to always issue the oldes stuff first.
    A interim storage type is a warehouse internal thing, as I already said, nothing phyiscal. And in WM you use the storage bin search to determine the bin from where you can pick the desired material and batch.
    My batch determination is setup to execute automatically when delivery is created. My deliveries are either created manually at the shipping office or automatically with a batch job.
    Instead of using LT03 we have to use LB10 to create a WM-TO.  Of course this will fail if the quant is locked because of an open TO or if the storage type where it physically resides is not includes in the search.

  • Re: Materials stuck in Storage Type 916

    Hi all,
    I am having a situation which I am unable to figure out the cause.
    In our current environment, we have implemented SAP WM.
    Now in a normal Sales cycle (Sales Order > Delivery > Invoice), a WM TO is required to do the Picking after a Delivery Document is created.
    When a WM TO is created it picks up the stock from a Fixed bin & Storage type XYZ (based on the search strategy) & then puts it into the Storage Type 916 & Storage Bin= Delivery Document Number.
    Once the Delivery is shipped (PGI) then this stock is removed from Storage type 916. This works fine.
    However there are many deliveries which have been shipped in the system, but the stock for that material is still in 916 storage type. I am unable to understand how to go about this situation.
    Kindly guide me through the initial probe for this situation.
    Thanks
    Vinit

    Hi
    I have checked all the status.
    The Goods Movement status of the delivery is C
    Also the delivery has been invoiced.
    When I analysed the same in LT22
    TO#       Item    Material  Stor. Typ  Source Bin   Qty Unit   Plnt           Created On         Typ   Dest. Bin        Dest.target qty   
    159173   0001  Material#    009        MTS01        1    EA      US89        10/07/2009        916  0080080207             1
    168198   0001  Material#    916   0080080207    1    EA      US89         10/07/2009       009   MTS01                     1
    180051   0001  Material#    009       MTS01         1    EA      US89         10/12/2009        916 0080080207              1
    Now the 1st entry is of the WM TO when the Delivery Picking takes place.
    Then the remaining 2 TO are created by some business user using Movement type 999.
    Hence I am not sure if a transaction has triggerred it or has he done it on purpose.
    My final objective is to have this stock hanging in storage type 916 - Dyanamic bin, to move out of the system as the delivery is already shipped.
    Can anyone guide me so as to how can I acheive the same effect to the system as that of movement type 601.
    Thanks

  • Putaway quantity does not show in Interim Storage Type 916

    Hi all,
    It could be a silly quesiton however would need your help with the issue below.
    When I create Picking TO from Outbound Delivery, usually I will see the Pick Quantity from Source Storage Bin and Putaway Quantity showed in Interim Storage Type 916. However, for the warehouse I'm working on I could not see the Putaway Quantity showing in Sty 916, only Picking Quantity displayed from source storage bin.
    For example, I created picking TO# 17439 to pick stock from storage type 001 to destination storage type 916. Here I only see the 'Pick Quantity' showing in storage type 001. I don't see 'Putaway Quantity' shows in Storage Type 916.
    Would appreciate if anyone can provide some advices. Thanks.
    Khanh Ngo

    Hi Jurgen, I have cancelled the TO above for some other tests. I have created a new delivery, please see the new TO#17442 with LT21:

  • Can I select the Storage type of Azure Backup from April, 1, 2015 ?

    Can I select the Storage type of Azure Backup from April 1, 2015 ?
    I want to select the Storage type for saving money and for purpose.
    "$10 per protected instance for each 500GB per month + Storage consumed".
    The price of Azure Backukp from April 1, 2015.
    I want to select the Storage type.
    LRS type = for client pc backup to saving money.
    GRS type = for critical server backup to protect against disaster.
    Regards,
    Yoshihiro Kawabata

    Short answer - yes, in the new pricing model, you can select LRS and GRS storage.  That being said, we are going to update this and other questions related to the pricing change with a list of FAQs hopefully by next week. Please bear with us
    Thanks
    Shreesh

  • Processed TRs to be deleted from LB10(display TRs list for a storage type)

    Dear all
    Is it possible to delete already processed transfer requirements for a storage type in Transaction LB10?
    Please guide me

    Use LB02 as below:
    Choose Logistics ® Logistics Execution ® Internal Warehouse Processes ® Transfer Requirement ® Change from the SAP menu.
    Enter the warehouse number and the transfer requirement number. You can also enter the number of the item you want to delete.
    From the initial screen, you have several options.
    - To delete a transfer requirement, access the header screen by selecting Header. Then choose   Transfer Requirement  ® Delete from the Change Header menu bar.
    - To delete one or more transfer requirement items, choose List of changes to access the screen where all the items are listed.
    Choose Enter.
    The system displays a list of all transfer requirement items.
    - Select the items that you want to delete in the D column. To delete the items, choose Enter.
    - You can also access a list of all transfer requirement items by choosing   Item overview. Select the item to be deleted (for example, by moving the cursor to the item) from the list and choose Edit  ® Delete item from the menu bar.
    Regardless of the option you have chosen, the system displays a confirmation window.
    To confirm the deletion, choose Yes.
    If you have selected several items, the system displays a confirmation window for each item.
    If the item is the only one in the transfer requirement, the system displays another window in which you confirm that you want to delete the transfer requirement

  • How to exclude stock of a particular storage type from collective availabil

    How to exclude stock of a particular storage type from collective availability check in MDVP.

    you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
    Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
    Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
    With this option the stock is not considered in ATP.
    IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
    With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
    Please if the issue is solved set the thread  as answered and provide the points to the useful replies.
    thanks for your cooperation

  • How to transfer stock from one storage type another storage type

    Hi Guys
    I have 10 items
    How can I transfer all in One Single Transfer order  from one storage type to another storage type
    I need to take TO print for all these 10 TO items

    Hi,
    Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
    Regards,
    Dilli Babu R

  • WM-PP : Backflush a material from different bins in the same storage Type

    Hi Gurus,
    We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
    Thanks
    Kris T

    Look like it's not possible using the SAP standard.

  • How to remove the stock from 916 -storage type

    Hi experts,
    In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
    How to remove the stock?
    Regards
    vr

    the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
    if the delivery is already goods issued, then you have to use LT01 to move the quants.
    The positive quant of 30 quantity can be moved to the place where it phyiscally is.
    the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse.  so you move from this bin to 916.

Maybe you are looking for