TA48312 hello i have an old powermac G4 and i cant update past 10.0.1! can anyone help
hello, i have an old powermac g4 and i cant update it past 10.0.1? can anyone help me in any way please as it is really annoying me now?
thanks
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>
Similar Messages
-
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
I made a ringtone and it did go into my tones and it won't upload to my phone. I have done this several times and never had any problems til now. Can anyone help me on this?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I get this about every 10 minutes and I have to restart my Mac and start again.
It is so annoying can anyone help me?
Invalid URL The requested URL "/", is invalid. ReferenceFor which browser and version? If Safari, there may be a solution found in the "More Like This" section over in the column on the right side of this website.
-
I have been on many of applications such as facetime,motion fx, photo booth etc but i cannot seem to get my camera working all what happen is 'Camera not available' which is rather annoying when i woke up to record a video, everything went to peices unfortunately. Can anyone help me ? Asap many thanks.
You may also find the steps in this Apple article helpful for troubleshooting your camera.
Best of luck. -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I have an ipod touch that is not being recognized on my pc. Can anyone help?
I have an ipod touch that is not being recognized on my pc. Can anyone help?
Go here:
iOS: Device not recognized in iTunes for Windows -
I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?
The iOS settings for the iPhone 3 never had an option to determine how long you wanted to save messages. That settings is new to iOS8. As far as some being deleted, there is nothing about the phone that should delete messages without some user intervention. Try a reset on the phone, this will not affect your data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
-
I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks
There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options. -
I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?
I have just got a Nikon D810 but CC wont open my raw file, can anyone help me please?
Ah ok shall try that now, thank you very much for your help
-
Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
i cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me
Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? Then you've stolen Apple's software and will receive absolutely no assistance from this forum. Enjoy your iBrick! -
I have an iPad 4th generation and when I updated to iOS 7 I can't use FaceTime. Every time I tried to sign in I get a message asking me to check my Network connection. FaceTime and iMessage are the only application that give me this message.
Try Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
Be sure to open Keychain Access and repair the keychain:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".
Maybe you are looking for
-
Can't do a save as with version 11.0.10
Since updating to version 11.0.10 we cannot do a save as with PDF documents created in Esker's Vsifax program. I have submitted a case with Esker but after poking around on Google finding others with the same issue. When we try to do a save as we g
-
VB startup script not running on Win7
Hi, my startup VB script not working on Windows 7. The script should install or uninstall office 2010 based on group membership. I tested scipt on Windows XP and everything works. When I run script manually, it works. Quite similiar batch file works
-
CS6 Indesign Error Code 6 on 3 PC's
I have 3 different PC's with recently purchased 3 copies of CS6 and am getting errors on all 3. Here is info from one of them. Crash Report: http://pastebin.com/PkM3D0DE Event Log Errors: Faulting application name: Bridge.exe, version: 5.0.0.399, tim
-
HT201177 My thunderbolt connection video works, but no audio on HDTV.
I bought a connector and set up on my HDTV to my Macbook Pro and the video is great. But no audio. thx
-
I need a windows installation usb disc. I have a HP311 1000ca. I was trying to clean up some room using a duplicate file cleaner. When I deleted the files my computer would no longer start up. I get the following message. Windows failed to start. A r