TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity.  Device will not allow extra downloads..?

storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity.  Device will not allow extra downloads..?

Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device.

Similar Messages

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Ipod appears empty on itunes, but still says 9GB used! pls help.

    I connected my ipod to a friends computer, and it seems to have 'wiped' it. The ipod shows up in itunes, but there is no music on it. However, it says at the bottom (and in exlporer) that I have used 9GB, so I assume my music is still on it. No music shows up on the actual ipod either, but my photos are stil on it. I can't figure out whats happening!
    I would be very grateful for help!
    Thanks
    video ipod   Windows XP  

    I do not understand what "it says in the windows connect to itunes" means?
    What is "it" and what is "windows"?
    Maybe:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT201250 Recently upgraded my virgin Internet ie to super hub big mistake I cannot now use the time machine it will not connect to my apple

    I recently upgraded my virgin Internet to super hub big mistake I cannot get hub to recognise the set up with the apple

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

    I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

    When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
    After updating te ipod see if there is a change in results.
    PS: make sure the device is active while syncing so keep tapping the screen.
    Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

  • I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that I originally registered my computer with apple, I subsequently changed my e-mail address.  Have since upgraded the e-mail addre

    I have never been able to use the Macmail feature.  Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct.  Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in.  It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me.  Any assistance would be much appreciated, Thanks

    Hi rbcjoker76, and a warm welcome to the forums!
    Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
    Required Fonts from 10.3, much the same in 10.4...
    http://support.apple.com/kb/HT2444?viewlocale=en_US
    You may have to get Pacifist...
    http://www.charlessoft.com/
    then intall the Fonts what you need from your Install Disk.
    Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.

  • Third-generation iPod appears in "My Computer" but not iTunes

    I am sure this problem has been brought up many times before, but my iPod is not showing up in my iTunes but does appear in my My Computer folder. I have tried the troubleshooting options available on the Apple support page and have done other web searches for some help but nothing to avail. Can anyone help me?

    hi haptic!
    I had it all working fine until I formatted my pc. Now windows recognizes it but not iTunes or the updater, and I don't get any error message.
    just checking. have you investigated these possibilities yet?
    Strange iPod behavior when Windows confuses iPod with network drive
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod not recognized and Windows Device Manager is empty
    ... another thing to check if your Device Manager is blank is this possibility:
    No Items Appear in the Device Manager List When You Open It
    otherwise, try steadily working through this document (apologies if you've seen this one already, but there are things in this one that you didn't explicitly mention having tried.)
    EDIT: sorry, got the link wrong first time around ...
    iPod appears in Windows Explorer but does not appear in iTunes
    keep us posted.
    love, b

  • IPod appears in My Computer but not in iTunes.

    I have a 30GB Video iPod, & everytime I plug it in I get a an error message that says:
    iPodService Module has encountered a problem and needs to close. We are sorry for the inconvenience.
    I'm not to sure what to do, I've tried the 5 r's & nothing helps to fix this problem.

    hi haptic!
    I had it all working fine until I formatted my pc. Now windows recognizes it but not iTunes or the updater, and I don't get any error message.
    just checking. have you investigated these possibilities yet?
    Strange iPod behavior when Windows confuses iPod with network drive
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod not recognized and Windows Device Manager is empty
    ... another thing to check if your Device Manager is blank is this possibility:
    No Items Appear in the Device Manager List When You Open It
    otherwise, try steadily working through this document (apologies if you've seen this one already, but there are things in this one that you didn't explicitly mention having tried.)
    EDIT: sorry, got the link wrong first time around ...
    iPod appears in Windows Explorer but does not appear in iTunes
    keep us posted.
    love, b

  • IPod appears in iTunes 7 but not in Windows Explorer

    my iPod appears in iTunes 7 but not in Windows Explorer
    also i can't put any photo on iPod

    my iPod appears in iTunes 7 but not in Windows Explorer
    if you don't have "enable disk use" or "manually manage music" selected in your summary tab, that's normal.
    do you have either "enable disk use" or "manually manage music" selected in your summary tab?

  • I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

    I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

    Are you choosing a different plan before tapping Done?
    To downgrade, you should be doing the following:
    Go to Settings > iCloud > Storage & Backup.
    Tap Change Storage Plan.
    Tap Downgrade Options and enter your Apple ID password.
    Choose a different plan to use when your current storage plan expires.
    Tap Done.

  • My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

    My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???

    If you open the Maps app where does that say you are located?
    For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
    Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
    You can confirm that by going to well-know place with wifi like Starbucks or McDonalds                              

  • HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

    HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
    I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt.  It is very slow, and locks up bad.  What upgrades do I need to do, or am I looking at having to go buy another labtop?  Also, can I do these upgrades myself - at what cost?
    **HP 15-d030nr**
    Hardware
    Product Name 15-d030nr
    Product Number F5X99UA
    Microprocessor 2.0GHz Intel Pentium N3510 Processor
    Microprocessor Cache 2MB L2 Cache
    Memory 4GB DDR3L SDRAM (1 DIMM)
    Memory Slots 2 user accessible
    Video Graphics Intel HD graphics
    Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
    Hard Drive 500GB 5400RPM hard drive
    Multimedia Drive SuperMulti DVD burner
    Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
    Wireless Connectivity 1x1 802.11b/g/n WLAN
    Sound HD Audio with stereo speakers
    Keyboard Full-size island-style keyboard with numeric keypad
    Pointing Device Touchpad supporting multi-touch gestures without on/off button
    External Ports Multi-format digital media card reader for Secure Digital cards 1
    SuperSpeed USB 3.0
    2 Universal Serial Bus (USB) 2.0
    1 HDMI
    1 VGA (15-pin)
    1 RJ-45 (LAN)
    1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
    3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
    **After Effects CC (2014) system requirements and language versions Windows**
    Intel Core2 Duo or AMD Phenom II processor with 64-bit support
    Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
    4 GB of RAM (8 GB recommended)
    5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
    Additional disk space for disk cache (10 GB recommended)
    1280 x 1080 display
    OpenGL 2.0–capable system
    QuickTime 7.6.6 software required for QuickTime features
    Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
    Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
    *I also have a 1TB external hardrive*
    This question was solved.
    View Solution.

    Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck  is going to be the Intel HD graphics, which cannot be upgraded. 
    You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
    https://www.youtube.com/watch?v=L7FvZ-JduRM
    http://www.crucial.com/usa/en/ct51264bf160b
    I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • TA44551 Just recently my ipod nano's battery seemed to stop working? I plug it into a charger, the ipod says it's charged, but when I take it off the charger, the screen goes black. What's going on? How can I fix it?

    Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.

    Yes.  The battery appears to be shot and in need of a replacement.  This can either be done by Apple or a third party repair company.
    http://www.apple.com/support/ipod/service/prices/
    You can Google "iPod battery replacement" for third party service centers.
    B-rock

  • Right now my ipod is set on 'music'. When I push the menu button, it will not go back to the main menu's, but I can still go to all the music and play it.

    Right now my ipod classic is set on 'music'. When I push the munu button, it will not go back to the main menus, but it will still go forward and select and play music normally. I tried resetting it by holding the menu and center buttons until the apple logo appeared, but the problem is still there.

    If your battery level is low, recharge it first for at least 2 hours, preferably 4 hours.
    After the Apple Logo, you release the buttons, what do you see on the iPod screen? (language selection?)
    Have a nice day!

  • I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    Please see the subject line thanks
    I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor.  Have the case number for the promised refund available.
    If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device.  Buying storage in iCloud does not add space to the device which is what you need.
    You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
    HTH

Maybe you are looking for

  • Text/Email Alert tone help 8520

    Hi Guys, My 8520 isnt playing the correct "tones" I have assigned for Text and Email alerts. It is playing the same tone for both and inside and out of the Holster. I have checked I have it set to play "Always" but it doesnt?? Any help much appreciat

  • How to find a view containing specified fields

    Hello Guys, I have got some fields of R/3 table based upon which i have to find View which has all the fields. I know that we have to go to help.sap.com and search there, but where to go after that i am not sure. Since i am new to BW , please guide m

  • BEx query: CO-PA data and hierarchy

    Hi BEx fans We need to design a report in BEx. There is a hierarchy in play, with let us say 2 levels. 2 Key figures are determined. Hierarchy Level 1 Hierarchy Level 2 Key figure 1 Key figure 2 Commercial Business 150 150 Mix0 100 50 Mix1 50 100 Non

  • Assigning the profile to a blade server using script

    I had a UCS workshop this morning with one of my clients, and he asked me if there is any way to develop a script to remove the profle from one of the blades and re-assign another profile to the same blade. Thanks for your input in advance!

  • Studio 17" Monitor Shuts Down at startup

    I have recently been having problems with my Stuido 17 monitor plugged into my PowerBook G4. Every time I plug in my monitor to the powerbook it goes through the motions of starting up then all of the sudden it shuts down the startup process in mid s