Why is there no time indicator where my mouse hovers over the clip or even in the video pane when I play a clip?

I've used a few other video editors and all of them showed some sort of time indicator of where my mouse was when I hovered over the clip for precise editing and/or at least a time of where the video was in it's play time. Idk the exact terms for these indicators but I want to know why there's not one in iMovie and if there is, how to enable it.

You do get a display of the start time of each clip in iMovie 10 if you are not using a wrapped timeline but it is poor compared to previous versions and of course FCP.
Geoff.

Similar Messages

  • My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

    My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion...  Help!!!
    Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?   

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • HT1212 My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I rented a movie on my iPad. It began to download but then it disappeared. The movie appears in my rented videos, but when I click it, it says, "video rented but not downloaded. Go to downloads to manage downloads". Where did my downloads go?

    I rented a movie on my iPad. It began to download but then it disappeared. I freed up a ton of storage space to make sure I had the room for it. The movie appears in my rented videos, but when I click it, it says, "video rented but not downloaded. Go to downloads to manage downloads". Where did my downloads go? I re-booted my iPad, signed off/on iTunes etc. I can't find a folder with downloadable items anywhere. ITunes just tells me, "you've already rented this video. Do you want to rent it again?" What happened to my movie?

    Did you check the Videos app?

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

  • When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

    When I wanted to update the programs, it said that there was an error, and it still says so. I cant even see the different programs now

    I have exactly the same problem here too. Followed all of the discussions and still unable to access programs

  • Why do I have to sign in to the app store even though the download is free?

    why do I have to sign in to the app store even though the download is free?

    Because all content that you download from the iTunes stores is coated with your Apple ID.

  • Shogun 2 will load but hang there at the black screen even before the producers videos appear.

    Shogun 2 will load but hang there at the black screen even before the producers videos appear. Problem never occur in other games. 
    HP Pavilion P6690d user. 
    Help!

    Qwerter, welcome to the forum.
    I suggest that you download and install any patches for Shogun 2.  This is the first thing that I do when I install a new game.  The developers are under a lot of pressure to get the games released.  So, there are going to be problems that need to be patched.
    Please let us know if this solves your problem or not.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Why are there some blank boxes where photos should be? maverick and iphoto 11

    Upgraded to Maverick and iPhoto 11(ver 9.5) and now some of the boxes in photos and events have no photos in them. Tried rebuilding thumbnails and repairing database, but no change. Mistakenly, I closed out screen that first appeared when iPhoto opened for first time that asked permission to do some task and perhaps this is the cause of the problem?

    Do you have a backup copy of the library from just before you upgraded to Mavericks and iPhoto 9.5?  If so restore it to your Pictures folder and try again to open it with iPhoto.
    Otherwise, run the first aid again and select the last option, Rebuild Database.  See if that helps.  If not try the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Why is there always "0 bytes" in Cache in Control Panel? It never increases, yet the stored data size continues to increase.

    This is annoying. I just updated to version 19 almost a week ago and still Firefox never seeks to keep anything in "Cache". After using firefox for a few days, it crashed a couple times already and now the browser randomly freezes (to the point to where my screen on/off button wont even respond). After maybe a few seconds...things will start moving, but sluggish to where I have to shut down FF in my task manager. There us "0" bytes cache shown, but stored data is at 70MB. I went into firefox and cleared cache via the settings but that did nothing. There is still 70MB of stored data and of course it alwats shows 0 bytes cache. What's up with that? Am I going to have to "Clear Data" just to fix this and lose my bookmarks and logins tet again?

    I think it's possible that Firefox, while emptying some database files, is not compacting them, so they continue to consume the same amount of "disk" space as they did before. On desktop versions of Firefox, you can use extensions such as the following for that purpose, but I don't know whether any such thing is available for mobile. Also, it would be nice to have it built in.
    * https://addons.mozilla.org/en-us/firefox/addon/places-maintenance/
    * https://addons.mozilla.org/en-us/firefox/addon/placescleaner/
    Unfortunately, in a quick search, I do not see a general purpose Android SQLite app that will runs on Firefox profile databases without root access (unless they are on the SD card, which seems highly doubtful).

  • TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

    My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

    Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
    Long shot but...
    I wonder if it's a variation of this, of which I've seen many different symptoms...
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
        1.    Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
        2.    Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • Why do I still get giant gray 'X's instead of an audio player, even with the correct MIME type for my Ogg Vorbis file, whether coded in the audio tag or as a source?

    I uploaded Saturnalia.ogg to my site and used the audio tag to try to display it on my test page. I'd love to ditch the ultra-slow Flash players I currently use, but I don't want to leave most of my site's users wondering what the files sound like, where they are, and why are there giant gray Xs ruining my layout. The audio files work fine in Safari and Opera, and IE uses the correct fallback text. I've tried both coding the file into the audio tag and into source tags. I've set controls="controls" and tried both type="audio/ogg" and type="audio/vorbis". I've tried with and without autoplay.
    According to Mozilla, audio tags are supported, but I'm not seeing any of that support on my site.

    Where are you seeing that?
    Earlier:
    <audio src="dsh.ogg" controls="controls" type="audio/ogg">Your browser does not support the HTML5 audio tag.</audio>
    Now:
    [<object type="application/x-java-applet" width="580" height="15px" controls="controls">
    <param name="archive" value="cortado.jar" />
    <param name="code" value="com.fluendo.player.Cortado.class" />
    <param name="url" value="http://desolosubhumus.webs.com/dsh.ogg" />
    You need to install Java to play this file.
    </object>]<br />
    <audio src="dsh.ogg" type="audio/ogg">
    You need to install Java to play this file.
    </audio>
    *p tags removed for readability
    I know the audio tag should open before the object tag opens and close after the object tag closes, and that I shouldn't need duplicate fallback text, but it wouldn't show up that way. The way I have it set up now finally works on Firefox, IE (plays, not fallback text), Opera, Safari, and Chrome. I'm still trying to tweak the code to make it more standard (audio tags in the proper places), to clean it up so it's not such a huge chunk, and to see if I can get the applet to stay visible (which may not be possible, as the only way I've made it work is as a Cortado VIDEO instead of a purely audio file), and to make it stop autoplaying instead of playing when the user chooses play. Perhaps a Kate stream for track labels and a play button image set directly behind the applet when the play button actually is.

  • Skype opens ad every time mouse hovers over it

    Basically, there is this Microsoft tablet ad on skype and every time I hover my mouse on it, it opens the ad. I tried to move my mouse over it constantly and I ended up with hundreds of tabs on chrome and my PC froze for a few minutes then chrome crashed. I have a game window open on my main monitor and chrome on my third monitor and I constantly move between them which causes the ad to keep opening since skype is slightly in between the two. Also the ad opens even when the skype window isn't active. Any way to fix this or is it intentional? Because if it's intentional then I'll have to look for a new VoIP software.

    I was using google as home startup page. I tried to change startup page default setting, but did not type in a correct url address, then could not get back the right menu to correct problem. After this when I opened firefox I got the problem with url address window, Tried typing about: home in url bar but received same message. Finally decided to try system reset. Started working but then said something like This is embarrising but we cannot reset because we cannot locate windows components and something else. You may have too many tabs open. Try closing some or close and open new browsing session. Tried all that but nothing happened. Kept receiving same message. After that I was pretty discouraged and for the hell of restarted laptop and made Bing my homepage. Don't exactly know why, but everything is now working fine. When I open firefox bing pops up with no problems, and when I go to my email there are no messages from firefox to draft anything. Go figure. Thanks for trying to help. bwebb

  • I have tried to download and install Firefox 3.16 (US version) on a XP system three times. The program installs normally but cannot be launched. Clicking on the shortcut or even on the firefox.exe in Windows Explorer does not launch the program.

    I had a similar problem on a Windows 7 system, but there I succeeded after a second attempt. On the XP system I desinstalled the Firefox program before every new attempt. But no way. Firefox appears in the Program groups in System Information, so I suppose the program is normally installed. Intelliguard of PC Tools was temporarily disabled, so that is not the problem. Skype is version 5. Is there a registry problem?

    I have tried it many times now. I get the alert that I should seriously upgrade, so being a dutiful Firefox and Mozilla user, I try. My iBook G4, several years old now, won't launch it.

  • HT4097 In regards to the above.  I go all the way through, even to the point of downloading the restore.  It completes the downloand and I get an error stating the download software is corrupt try again.  I did this 5 times with the same result.  Can anyo

    My wife has an iPad 2. She recently tried to update the OS via wireless internet.  The system became totally unresponsive.  I finally got the apple logo to come up on the screen, but nothing else.  I went online and found out that I could possible restore the system to the original factory settings.  I held down the home button and plugged in the USB cable which was connected to my iMac.  I went through the restore download to restore the system to factory setting. After the download was complete I ge the following error iPad Software download is corrupt. Disconnect and try again.  I did this 6 times with the same result each time.  I ensured the iMac was running the latest version of iTunes.  I really need some help with this.....can anyone help me please!

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

Maybe you are looking for