Xcode internal error "couldn't create ~/.Xcode"
hi all, I've got a fresh download of xcode 3.2.4 on snowleopard 10.6.5 and when starting a project on my usual User (which is a standard user) i get an "couldn't create ~/.Xcode" error.
I've created a new standard user and xcode works fine with it
id prefer to keep to my one usual user, any ideas?
edit - should add that if i click 'continue' then xcode launches but i'm loathe to trust it
Message was edited by: giantreign
giantreign wrote:
how do i add myself to my home folder with read & write permissions and get rid of _unknown?
In the Finder, do Get Info on your home folder. At the bottom of the Get Info window, click the + button.
The actual ownership may be incorrect so you might not be able to remove _unknown.
Another alternative would be to use the Terminal:
sudo chown $USER:staff ~
Similar Messages
-
CORE4005: Internal error: unable to create JVM
Hi,
Can't start-up the domain domain1 after I've installed AppServ 7.0 for W2000. This is the installation log and the admin-server instance log file with the debug set to FINEST.
Install log :
INFO - Start core server configuration.
INFO - Domain successfully created
INFO - Server instance successfully created
WARNING - SNMP subagent installation did not succeed
INFO - End core server configuration.
INFO - Start samples configuration.
INFO - End samples configuration.
INFO - Start Sun ONE Messaging Queue configuration
INFO - End Sun ONE Messaging Queue configuration
INFO - Start PointBase configuration
INFO - End PointBase configuration
and admin-server instance log file :
[29/Sep/2003:17:17:04] INFO ( 1504): CORE1116: Sun ONE Application Server 7.0.0_01
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5169: User authentication cache entries expire in 120 seconds.
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5170: User authentication cache holds 200 users
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5171: Up to 4 groups are cached for each cached user.
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP4207: file cache module initialized (API versions 1 through 1)
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP4302: file cache has been initialized
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3063: KeepAliveTimeout is 30 seconds (default value)
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3067: PostThreadsEarly set to off
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3066: MaxKeepAliveConnections set to 256
[29/Sep/2003:17:17:11] FINE ( 1504): Installed configuration 1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm stickyAttach: 1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -DJAVA_HOME=D:/Sun/AppServer7/jdk
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.installRoot=D:/Sun/AppServer7
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.instanceRoot=D:\Sun\AppServer7\domains\domain1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.language=fr
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.country=FR
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: exit
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: vfprintf
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.policy=D:/Sun/AppServer7/domains/domain1/admin-server/config/server.policy
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.auth.login.config=D:/Sun/AppServer7/domains/domain1/admin-server/config/login.conf
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.jdo.api.persistence.model.multipleClassLoaders=reload
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.configRoot=D:/Sun/AppServer7\config
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.perlRoot=D:\Sun\AppServer7\lib\perl
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqLib=D:\Sun\AppServer7\imq\lib
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqBin=D:\Sun\AppServer7\imq\bin
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.webServicesLib=D:\Sun\AppServer7\share\lib
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.icuLib=D:\Sun\AppServer7\bin
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.defaultLocale=fr_FR
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.verifier.xsl=D:/Sun/AppServer7/lib/verifier
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Xmx128m
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dsun.rmi.dgc.server.gcInterval=3600000
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.class.path=D:/Sun/AppServer7/lib/appserv-rt.jar;D:/Sun/AppServer7/jdk/lib/tools.jar;D:/Sun/AppServer7/lib/appserv-ext.jar;D:/Sun/AppServer7/lib/appserv-cmp.jar;D:\Sun\AppServer7\imq\lib/imq.jar;D:\Sun\AppServer7\imq\lib/imqadmin.jar;D:\Sun\AppServer7\imq\lib/imqutil.jar;D:/Sun/AppServer7/lib/appserv-admin.jar;D:/Sun/AppServer7/lib/appserv-ideplugin.jar;
[29/Sep/2003:17:17:11] FATAL ( 1504): CORE4005: Internal error: unable to create JVM
[29/Sep/2003:17:17:11] SEVERE ( 1504): CORE4009: Failed to load JVM (check your JRE)
[29/Sep/2003:17:17:11] SEVERE ( 1504): CORE3187: Late initialization failed: Error running init function(late) init-j2ee: unknown error
if anyone could help, I would apreciate
Thanks to allOk. I've managed to solve my problem. Thanks to everybody.
For anyone who is interested in here is the solution that fixed the error for me :
Because I had before installed JVM version 1.4.2 and then I uninstalled it and put the version 1.4.1_01, as the one that App Server 7.0 is using, the uninstaller has left a newer version of jvm.dll in WINNT/System32
After I've renamed this file to _jvm.dll (for example), just to get rid of it, the domain and his instances have started correctly.
Good luck! -
XCode "Internal Error" on new/load project
When I open or create a new project, I'm confronted with the following internal error:
Internal Error
File: /SourceCache/DevToolsBase/DevToolsBase-658/pbxcore/Target.subproj/PBXCompilerSp ecificationGcc.m
Line: 375
Object: <PBXCompilerSpecificationGcc:0x011a66c0>
Method: compileSourceCodeFileAtPath:ofType:toOutputDirectory:inTargetBuildContext:
method -[PBXCompilerSpecificationGcc
compileSourceCodeFileAtPath:ofType:toOutputDirectory:inTargetBuildContext:] is a responsibility of subclasses of PBXCompilerSpecificationGcc
I'm running XCode 2.2 on OS X 10.4/PowerBook.
I'm new to XCode and Mac, this is the first time I've tried using XCode. Any idea what's going wrong for me?
Many thanks.Ah, thanks for the response! When I looked into the project folders, I discovered I was somehow missing several of the XCode packages. I 'upgraded' my installation and now everything seems to be in order with no 'internal error' messages. Thanks again!
-
i installed xcode yesterday and it crashes when i press create a new project.
UNCAUGHT EXCEPTION (NSInvalidArgumentException): -[IDECustomToolbar setFullScreenAccessoryView:]: unrecognized selector sent to instance 0x401438940
UserInfo: (null)
Hints: None
Backtrace:
0 0x00007fff89943cfa __exceptionPreprocess (in CoreFoundation)
1 0x00007fff867ea9ea objc_exception_throw (in libobjc.A.dylib)
2 0x00007fff899cecfe -[NSObject doesNotRecognizeSelector:] (in CoreFoundation)
3 0x00007fff89931073 ___forwarding___ (in CoreFoundation)
4 0x00007fff89930e88 _CF_forwarding_prep_0 (in CoreFoundation)
5 0x000000010fe07ff3 -[IDEWorkspaceWindowController windowDidLoad] (in IDEKit)
6 0x00007fff8b7f3f6a -[NSWindowController _windowDidLoad] (in AppKit)
7 0x00007fff8b7eb646 -[NSWindowController window] (in AppKit)
8 0x000000011000572f -[IDEDocumentController _openUntitledWorkspaceDocumentAndDisplay:simpleFilesFocused:editorDocumentURLOr Nil:error:] (in IDEKit)
9 0x000000010fef8961 -[IDEApplicationCommands showTemplateChooserForTemplateKind:] (in IDEKit)
10 0x00007fff8993398d -[NSObject performSelector:withObject:] (in CoreFoundation)
11 0x000000010fef0808 -[IDEApplicationController(IDECommandAdditions) forwardInvocation:] (in IDEKit)
12 0x00007fff899311f4 ___forwarding___ (in CoreFoundation)
13 0x00007fff89930e88 _CF_forwarding_prep_0 (in CoreFoundation)
14 0x00007fff8993398d -[NSObject performSelector:withObject:] (in CoreFoundation)
15 0x00007fff8b6fae66 -[NSApplication sendAction:to:from:] (in AppKit)
16 0x000000010f728222 -[DVTApplication sendAction:to:from:] (in DVTKit)
17 0x000000010fe04ca2 -[IDEApplication sendAction:to:from:] (in IDEKit)
18 0x000000010fef2ba8 +[IDECommandManager sendActionForCommandWithIdentifier:from:] (in IDEKit)
19 0x00007fff8993398d -[NSObject performSelector:withObject:] (in CoreFoundation)
20 0x00007fff8b6fae66 -[NSApplication sendAction:to:from:] (in AppKit)
21 0x000000010f728222 -[DVTApplication sendAction:to:from:] (in DVTKit)
22 0x000000010fe04ca2 -[IDEApplication sendAction:to:from:] (in IDEKit)
23 0x00007fff8b6fad98 -[NSControl sendAction:to:] (in AppKit)
24 0x00007fff8b6facc3 -[NSCell _sendActionFrom:] (in AppKit)
25 0x00007fff8b6fa186 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
26 0x00007fff8b779540 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
27 0x00007fff8b6f8d92 -[NSControl mouseDown:] (in AppKit)
28 0x00007fff8b6c37c6 -[NSWindow sendEvent:] (in AppKit)
29 0x00007fff8b65c28e -[NSApplication sendEvent:] (in AppKit)
30 0x000000010fe049f6 -[IDEApplication sendEvent:] (in IDEKit)
31 0x00007fff8b5f36e2 -[NSApplication run] (in AppKit)
32 0x00007fff8b870cfb NSApplicationMain (in AppKit)
33 0x000000010f53aeec (in Xcode)
i unnistalled it, installed it again (same with itunes, since i saw a lot of ppl with internal errors and reinstalling itunes fixed those errors)
I have to develop a program (iphone/ipad) for college and i cant even get started :/
Thank YouRepost to
https://discussions.apple.com/community/developer_forums -
OES error:Couldn't create SOAP msg:Unable to create stAX reader & writer
Hi,
I can see the below severe error in the nohup.out log file for OES.
Environment:
Unix Server 1: OES admin and SM
Unix Server 2: SM with the same name
Both the SM pointing to Server 1 admin server.
I can see the below error only on server 2. There is no such error on server1.
I donot understand while this error is coming up.
Checked all web services through SOAPUI and all web services are responding properly as expected from Server2
NOHUP.OUT
com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit handle
SEVERE: Couldn't create SOAP message due to exception: Unable to create StAX reader or writer
com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: Unable to create StAX reader or writer
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:287)
at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:102)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:512)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: com.sun.xml.ws.streaming.XMLReaderException: Unable to create StAX reader or writer
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$NoLock.doCreate(XMLStreamReaderFactory.java:430)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$Woodstox.doCreate(XMLStreamReaderFactory.java:454)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.doCreate(XMLStreamReaderFactory.java:219)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:172)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:311)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:135)
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:287)
... 22 more
Caused by: com.ctc.wstx.exc.WstxIOException: Connection reset
at com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:536)
at com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:585)
at com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:641)
at com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:344)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$NoLock.doCreate(XMLStreamReaderFactory.java:428)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$Woodstox.doCreate(XMLStreamReaderFactory.java:454)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.doCreate(XMLStreamReaderFactory.java:219)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:172)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:311)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:136)
... 23 more
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
at java.io.InputStream.read(InputStream.java:85)
at com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.read(Unknown Source)
at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
at weblogic.servlet.internal.PostInputStream.read(PostInputStream.java:177)
at weblogic.servlet.internal.ServletInputStreamImpl.read(ServletInputStreamImpl.java:228)
at weblogic.wsee.jaxws.HttpServletAdapter$RequestResponseWrapper$InputStreamWrapper.read(HttpServletAdapter.java:571)
at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:307)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:250)
at com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:133)
at com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:531)
... 32 more
Can anyone help me out with this.
Regards,
GarimaIt seems that one of the providers was mis-configured (the first service called) :
HTTP Transport Configuration
Follow HTTP redirects DISABLED
Use Chunked Streaming Mode ENABLED
when I enabled the HTTP redirect then the problem went away...
HTTP Transport Configuration
Follow HTTP redirects ENABLED
Use Chunked Streaming Mode DISABLED -
Internal Error -5000 when creating AP Credit Memo
hi all, i've some problem when trying to create AP Credit Memo using VB.Net via SAP B1 SDK.
My application keep throwing error "Internal Error -5000 Occured"
My friend suggest me to create AP Credit Memo using SAP B1 application first, then try using the same parameter that i inputed into the system to create AP Credit Memo using SDK, he said it ussualy works.
I already try my friend suggestion to create AP Memo using SAP B1 Screen and it
was worked.
The information that i input when creating AP Memo via SAP screen are :
- Vendor
- Item/Service Type ="Service"
- Item/Service Description
- G/L Account
- Tax Code ="VNC"
- WTaxLiable =No
But when I try to create AP Memo using VB.NET using SAP SDK, it still
throwing the same exception as before (Internal Error -5000 Occured) even
I passing the same parameter.
Bellow is my code :
For the master :
vAPmemo.DocObjectCode =
SAPbobsCOM.BoObjectTypes.oPurchaseCreditNotes
vAPmemo.DocType =
SAPbobsCOM.BoDocumentTypes.dDocument_Service
vAPmemo.CardCode = "V001" ' txtCcode.Text
vAPmemo.DocDate = Now 'DatePosting.Value
vAPmemo.DocDueDate = Now ' DateDue.Value
vAPmemo.DocCurrency = "IDR"
vAPmemo.Comments = "Based On Tagihan No. " &
dtTable.Rows(j)("JurnalMemo").ToString.Trim & "."
For The Detail :
vAPmemo.Lines.AccountCode =
dtTable.Rows(j)("AccountCode").ToString.Trim
vAPmemo.Lines.BaseType = 18 'basetype = 19 (a/p
credit memo)
vAPmemo.Lines.ItemDescription = "Test"
vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
vAPmemo.Lines.TaxCode = "VNC"
vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
Is there anything wrong in my code ?
or missing parameter?
Regards,
Herfin
Edited by: Herfin Jodana on Aug 28, 2008 3:29 AM
Edited by: Herfin Jodana on Aug 28, 2008 3:30 AMHI,
if you want ot create a A/P Credit memo, you do not have to give the basetype/BaseLine/BaseEntry fields between document lines.
the correct is:
vAPmemo.Lines.AccountCode =
dtTable.Rows(j)("AccountCode").ToString.Trim
vAPmemo.Lines.ItemDescription = "Test"
vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
vAPmemo.Lines.TaxCode = "VNC"
vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
if you want to create a A/P Credit memo based on Existing Invoice, you must have to provide the basetype/BaseLine/BaseEntry which means:
vAPmemo.Lines.BaseType = 18 'APInvoice
vAPmemo.Lines.BaseEntry = 'Refrence docentry for A/P Invoice
vAPmemo.Lines.BaseLine = 'reference to A/P Invoice linenumber
Try this, it is now working.
Best Regards,
J. -
Error: couldn't create user
hi,
i have installed EP on WAS 6.40.
when i am tring to create a user i am getting the error as : "Couldn't create User".
can someone guide me as to how to resolve this issue....
please reply fast...Hi Uday,
Can you plz tell me the version?
Did you face any problems while installing Portal?
The reason why I asked you is that I recently installed SP12 and did not face any problem. was able to create users without any problems.
Cud you plz send me some screenshots. It wud help me solve your problem better.
You may email me on [email protected]
Awaiting Reply.
Warm Regards,
Ritu R Hunjan -
Internal error trying to create a VM
I'm unable to create a VM in Azure, and I just get this message. Is there anything I can do to find out more? I'm totally stuck. Azure status looks good so I have nothing to go on. Thanks.
The server encountered an internal error. Please retry the request. The long running operation tracking ID was: a817554bf7af76488bc4c7dddd50d852.Hi,
Which region did you select when creating the VM? Can you create VMs in other region?
Based on my experience, sometimes, after getting the error "The server encountered an internal error. Please retry the request", you can wait for a while, then you can create a VM succussfully.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Error: "Couldn't create Crystal Reports Engine for report format version 10.0"
Post Author: mkubala
CA Forum: Crystal Reports
I created several reports in ClearQuest v2003.6.15 using Crystal Reports v10. When a user tries to run these reports from his machine he gets the following error:"Problems executing ReportContact your ClearQuest administrator to verify that a supported version of Crystal Reports has been installed.Couldn't create Crystal Reports Engine for report format version 10.0"My version of CR is compatible with this version of CQ and he shouldn't need CR installed to run the reports so I'm not sure what the issue is?Post Author: nschindler
CA Forum: Crystal Reports
I have the same problem with ClearQuest 7.0.1.1, except the error contains 'version 11.0' instead of 10.0.This happened when I installed Crystal Reports XI Pro designer. I followed the procedure to manually uninstall and re-install CR, which allowed me to to author report formats, but I still get this error when trying to view report in the ClearQuest for Windows client. I tried to re-register all the CR viewer DLLs I could find, but still no luck.Any suggestions? Thanks,Nate -
JCO connection error:Couldn't create JCOClientConnection for logical System
Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error saying Could not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022 Minimum value of JCo Pool Size in total = 80
u2022 Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022 Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
PriyankaHi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet -
Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I reinstalled with clean xcode, but it did not help. I see the building freeze when "coping 2 of 2 resources to product
Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
I found a few posts with the same ERROR but no clear fix. Any help will be appriciated.Hi, i had the same problem yesterday and after searching I found no solution to this error.
Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
Good luck to you guys. -
'Couldn't create RGB colorspace error'
Hi,
I tried to print with my HP Deskjet F380 under SnowLeopard and get the following error message:
'Error: Couldn't create RGB colorspace'
I've not found information about this error message.
The test page (printer's utility) comes out without any problem, but if I try to print from any other app, this error comes.
Can this issue be in relation with monitor calibration (I used Eye one calibrator to create icc profile a few days ago)sdennett wrote:
One of the Snow Leopard updates has broken both of my printers. Both are hard-wired network printers that previously worked fine.
1. Brother HL-5250DN B/W laser
If you are using the Brother driver, have you tried using the Generic PostScript PPD as a workaround?
2. Samsung CLX-3170 Color Laser
No matter what I try to print, I always get the same error: "couldn't create rgb colorspace". I have searched both these forums and the web and can't even find a description of what might be causing this (although may Mac owners seem to be having variations of the problem).
3. Troubleshooting -- What I have tried (systematically, multiple times)
- Re-installed latest printer drivers from Manufacturer's sites
- Installed Gutenprint 2.4 CUPs drivers
Which driver are you using when adding the printer? Have you tried the other one? Samsung has SL drivers for this model, so you shouldn't have to use the Gutenprint driver.
I hope that someone at Apple has a solution.
Apple doesn't write the drivers, so if using the Generic PostScript PPD or switching drivers doesn't work, you might have better luck contacting Brother and Samsung. -
Couldn't create temporary file.
I have a 1TB drive in my Mac Pro running Mavericks 10.9.4 and I went to disk utility to erase some free space on the drive. However I keep getting the error message:
Secure Erase Free Space failed
Secure erase Free Space failed with the error:
Couldn't create temporary file.
I Googled the error message and couldn't find anything. The error message is heaps unhelpful, it doesn't tell me why it couldn't create a temporary file or what I can do to fix it. Please help, it would be much much appreciated!I have a time machine backup that is up to date, with tons of extra space. Could I copy over the files I have on my macbook pro hard drive and recopy back once I have wiped out the hard drive, thinking maybe there is a problem copied onto the ™ backup?
-
Hello All-
I am trying to use the VideoTransmit demo code
java VideoTransmit file:/root/javatemp/Before.jpg 132.170.194.58 9000
Error : Couldn't create processorWell I figured out why the screen is garbled. This is a seperate issue with the size of the video which is unrelated to the java portion oy my problem.
Here is the modinfo of the driver. The driver is ivtv which to my knowledge is the only driver for the Hauppauge PVR 250:
ist-tank1:~# modinfo ivtv
filename: /lib/modules/2.4.25/kernel/drivers/media/video/ivtv.o
description: "Alpha iTVC15 driver"
author: "Kevin Thayer"
license: "GPL"
parm: tuner int, description "
Tuner type selection, see tuner.h for values"
parm: yuv_buffers int, description "
Number of 32K buffers for copying YUV.
Default: 60, Min: 40 Max: 500"
parm: mpg_buffers int, description "
Number of 32K buffers for copying mpg.
Default: 100, Min: 15 Max: 100"
parm: vbi_buffers int, description "
Number of 32K buffers for copying VBI.
Default: 10, Min: 3 Max: 100"
parm: num_devices int, description "
Number of supported devices (1-9).
Default: 1"
parm: dec_mpg_buffers int, description "
Number of 32K buffers for decoding MPG.
Default: 8, Min: 5 Max: 100"
parm: dec_yuv_buffers int, description "
Number of 32K buffers for decoding YUV.
Default: 0, Min: 17 Max: 500, 0 to disable"
parm: dec_mpg_qlen int, description "
Number of 32K buffers to queue before dispatching to decoder
Default: 2, Min: 0 Max: <dec_mpg_buffers>"
parm: dec_yuv_qlen int, description "
Number of 32K buffers to queue before dispatching to decoder
Default: 0, Min: 0 Max: <dec_yuv_buffers>"
parm: ivtv_debug int, description "
Debug level (bitmask), default, errors only
(debug=127 gives full debuging)"
parm: ivtv_pal int, description "
Use PAL as default video mode instead of NTSC"
As for the JMF install, I did the install from an xterm and I still have the same errors displayed. This is with the display variable set properly.
As for the JPG transmission test, I thought it was possible to use a static image as a source. No big deal because I am only concerned with getting video to work.
As for the audio, I am trying to figure out how to disable it because I dont need it. Is there a way to disable it?
Thanks for all your help. -
I wrote a trigger with a cursor but it generate following msg and focused on FOR EACH ROW line while compiling any help
PLS-00801: internal error [ph2csql_strdef_to_diana:bind]
CREATE OR REPLACE TRIGGER ERPTRAIN.TRG_ADM_USER_UPDATE
AFTER INSERT OR UPDATE OR DELETE
ON ERPTRAIN.ADM_USER REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
CURSOR C1(vUserId VARCHAR2)
IS
SELECT EMP_CODE FROM DOTCOM.SM_EMPLOYEE
WHERE EMP_CODE = vUserId;
C1_REC C1%ROWTYPE;
BEGIN
IF C1%ISOPEN THEN
CLOSE C1;
END IF;
IF INSERTING OR UPDATING THEN
OPEN C1(:NEW.USER_ID);
FETCH C1 INTO C1_REC;
IF C1%NOTFOUND THEN
INSERT INTO DOTCOM.SM_EMPLOYEE
EMP_CODE, EMP_NAME, EMP_CR_DT,
EMP_CR_UID, EMP_LST_MOD_DT, EMP_FREEZE_FLAG,
EMP_APPROVED)
VALUES
:NEW.USER_ID, :NEW.USER_DESC, :NEW.USER_CR_DT,
:NEW.USER_CR_UID, :NEW.USER_UPD_DT,:NEW.USER_FRZ_FLAG,'N');
ELSE
UPDATE DOTCOM.SM_EMPLOYEE
SET EMP_CODE =: NEW.USER_ID,
EMP_NAME =: NEW.USER_DESC,
EMP_CR_DT =: NEW.USER_CR_DT,
EMP_CR_UID =: NEW.USER_CR_UID,
EMP_LST_MOD_DT =: NEW.USER_UPD_DT,
EMP_FREEZE_FLAG=: NEW.USER_FRZ_FLAG
WHERE EMP_CODE =:NEW.USER_ID;
END IF;
CLOSE C1;
END IF;
IF DELETING THEN
OPEN C1(:OLD.USER_ID);
FETCH C1 INTO C1_REC;
IF C1%FOUND THEN
DELETE FROM DOTCOM.SM_EMPLOYEE WHERE EMP_CODE = :OLD.USER_ID;
END IF;
CLOSE C1;
END IF;
END;Your trigger is way too complicated: you don't need the extra cursor, which just seems there to control whether a row exists or not - just run the statements without extra checking.
A somewhat simplified version would be:
create or replace trigger erptrain.trg_adm_user_update
after insert or update or delete
on erptrain.adm_user
for each row
declare
begin
if inserting
or updating
then
update dotcom.sm_employee
set emp_code = :new.user_id,
emp_name = :new.user_desc,
emp_cr_dt = :new.user_cr_dt,
emp_cr_uid = :new.user_cr_uid,
emp_lst_mod_dt = :new.user_upd_dt,
emp_freeze_flag = :new.user_frz_flag
where emp_code = :new.user_id;
if sql%rowcount = 0
then
insert
into dotcom.sm_employee (emp_code,
emp_name,
emp_cr_dt,
emp_cr_uid,
emp_lst_mod_dt,
emp_freeze_flag,
emp_approved
values (
:new.user_id,
:new.user_desc,
:new.user_cr_dt,
:new.user_cr_uid,
:new.user_upd_dt,
:new.user_frz_flag,
'N');
end if;
end if;
if deleting
then
delete from dotcom.sm_employee
where emp_code = :old.user_id;
end if;
end trg_adm_user_update;Actually it looks you need a unique constraint on dotcom.sm_employee.emp_code which probably s missing?
Maybe you are looking for
-
Hi all i try to install oracle 9i on redhat linux 9.0 when i run ./runinstaller it ask me all information but it showing some error while creating java Environment ( Link Pending)
-
Generating password protected pdf document usuing as_pdf_mini package
Actually i want to implement password protected pdf file which is generated using as_pdf_mini. so i want help on that.....
-
Hi, I have an inbound IDOC for creating sales order. my reqeuirment is at item level segement which has many fields and three fields from this list( plant, stor.loc and shipping point) will be blank. We want to derive these fields from a Z table and
-
Lost catalogs after Lightroom 5.6 update
I reluctantly updated Lightroom 5.5 to 5.6 last night and the next time I tried to reopen Lightroom my most recent catalogs were gone. My iMac opened Lightroom with catalogs from a year ago. All of my most recent edited catalogs are MIA. The same
-
HT5278 My iPad 2 refuses to update to new software.
For some reason my iPad 2 froze during update and required manual shutdown. Now iPad 2 is "unable to install update"