0CALMONTH2 DISPLAY IN QUERY

Hi,All
    Suddenly all the query display with 0CALMONTH2 as Text but not key.
    I think this is not related to single  query.
    I have checked in rsd1 the text is display as key.

Hi
I have checked in rsd1 the text is display as key.  ?????
Check in the query for OCALMONT2 property it should be display as Key to get Key values. Query settings override IO Bex display settings
Thanks
Tripple k

Similar Messages

  • Data not getting displayed in query

    Hi
    I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
    data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
    how do i resolve the issue
    Regards

    solved

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • How to display the query results in several pages?.

    Hi,
    i want to display the query results in several pages. for example my query result found 50 matches, now i want to print 20 per pages next 20 will be in next pages. iam using only jsp & mysql.
    Regards
    Chinna

    Hi, what you are trying accomplish is known as pagination.
    You could use JSTL tags with Custom Tags to perform pagination in your JSP pages.
    evnafets showed me DisplayTags , you could use those as well http://displaytag.sourceforge.net/11/tut_externalSortAndPage.html
    Here is one article on paging:
    http://www.javaworld.com/javaworld/jw-07-2004/jw-0726-pagination.html

  • Display Crosstab query in DataGrid

    Hi, I'm a Flex beginner. Could someone please help me how to
    display crosstab query result in DataGrid? The following query
    returns 6 columns:
    - First column: values in the field Sell_Channel
    - Second: Sum(Revenue Total) from the Revenue field.
    - Others: Revenue Subtotal by Sell_Channel and quarter.
    Quarters are values stored in the field name Quarter. In Datagrid,
    what would be the datafield for these 4 quarter columns?
    Thanks millions.
    Here is my SQL:
    TRANSFORM Sum(Revenue.RevenueTotal) AS SumOfRevenueTotal
    SELECT Revenue.Sell_Channel, Sum(Revenue.RevenueTotal) AS
    [Total Of RevenueTotal]
    FROM Quarter INNER JOIN Revenue ON Quarter.FiscalQuarter =
    Revenue.Quarter
    WHERE (Revenue.Fiscal_Year="2006")
    GROUP BY Revenue.Sell_Channel
    PIVOT Quarter.Quarter;

    Crosstab is a reporting function not a SQL one. SQL statements must have a fixed number of columns regardless of the data.
    The only way to do it using SQL is to use PL/SQL to generate a dynamic query as shown on Ask Tom here
    http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:15151874723724
    Otherwise there are reporting tools such as Oracle Reports that can do it as well.

  • Display the query result in an Excel file??

    hi there..
    am writing one script file that queries my DB and display the query result in an Excel file??
    i.e: if my query is :
    select col1, col2
    from table;
    and i want the results to dispalys in 2 col. in an Excel spreadsheet..
    Appreaciating ur cooperation..
    Mourad

    set colsep to a delimiter that is not normally part of your data like |
    also setup the environment with these other setup commands
    Set Echo Off;
    Set Concat Off;
    Set Pagesize 9999;
    Set Feedback Off;
    Set Verify Off;
    Set Term Off;
    Set Space 0;
    Set Colsep '|'
    Set Underline Off;
    If you wanted to use a comma delimiter the setup would be same but the set colsep='","'
    with the addition of concatenating a " on the first col and last col of the query
    eg.
    -- if first col and last_col are character types then
    SELECT '"'||col1,....,last_col||'"'
    FROM table;
    Otherwise if either is a number they would have to be converted with a TO_CHAR

  • Large number of attributes reduces data display in Query (PLS HELP).

    Dear Guru's
    We have newly upgraded our system to 7.0, Currently i have a Query based on master data info object(0 equipment) which contain several attributes, due to huge number of attributes, i cannot see data for few  attributes( Ex:-0service descrip), but data exists for these atrrib, when i check in RSA1. my client want to use heavy number of 0Euipment numbers(nearly 10000) in selection screen. thats the reason for data not to be seen.
    WE are under SP 16 also(Note 562162 - Additional selection of attribute reduces query result set is allready exists), and did not found any proper note.
    So guru's can any one please tell me how i can get the data in Query for these attribute by keeping the same selection option for Equipment numbers (10000).
    Dude's give me some good suggestion please...client is waiting from 1 week
    Thanks in adv
    Dev
    Edited by: Srinivas dev on Jun 10, 2008 11:52 AM

    Dear Yogesh,
    Thanks a lot dude...
    I assigned points for your kindly help....
    Got any idea about by initial post   Large number of attributes reduces data display in Query
    Thanks and Regards
    Dev

  • Display Bex Query in Web

    Hi,
    I want to display the Bex query directly in web.What are the possible ways that i can do, for the user to view the report in the web.Can anyone tell me how to configure RRMX in this case or how to do the settings for user to navigate from user menu to the required BW report directly from the SAP work bench.?I have tried linking from User Menu where the java servlets blocking the navigation.? Do i need to follow any configuration for this too?
    Thank You,
    Edited by: sunanda G on Feb 28, 2011 9:59 AM

    Hi,
    There are multiple ways to display the query in Web:
    ->Web Analyzer: In the query designer you need to click on the web symbol it will take you to run the query in web in the explorer. For this your server need to be setup contact your basis team for the same.
    ->WAD: After creating a query, you can display the same using Web application designer. Here you need to check the Java Settings to be installed.
    ->EP: You can copy the link generated from the query can be copied and displayed in the Enterprise portal.
    There is a search option available in the SDN , you can search for more information regarding the same.
    Hope this helps...
    Rgs,
    Ravikanth

  • Date should be displayed on query execution

    hello all
    when v execute a query date should display when query is executed.like if i execute query on 01/06/2006 this date should be displayed and when execute query on 01/02/2006 this date should be displayed?,like that so on?
    kindly anyone let me know how it should be done?
    how this should be done?
    many thanks

    hi Balaji,
    in bex analyzer, you can display the date with menu business explorer -> display text elements -> general, you will see some info, 'author'... 'last refreshed'.
    in web (WAD) you can use web item 'text element' and choose element type 'general text' and
    element id 'SYUZEIT'.
    element id can be used
    general text elements:
    - technical name of the query (REPTNAME)
    - description of the query (REPTXTLG)
    - InfoProvider (INFOCUBE)
    - key date for the query (SRDATE)
    - validity of the data (date and time) (ROLLUPTIME)
    - the person who wrote the query (AUTHOR)
    - the last time the query was changed (date and time) (MODTIME)
    - the last person to make changes to the query (MODUSER)
    - current user (SYUSER)
    - the last time the query was refreshed (date and time) (SYUZEIT)
    hope this helps.
    Message was edited by: A.H.P

  • Customer number is not displayed at Query

    Hi to all,
    I have created a query where i need to display the Receivables aging Report.
    when i check data at Cube level data is coming properly for Every Customer.
    but when i filter customer at Query level data is not displayed at query level.
    Please can any one provide me solution.
    i shall be thnakful to you for this.
    Regards
    Pavneet Rana

    Thanks for Reply,
    For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
    although correct data exist for every customer at CUBE level.
    Regards
    Pavneet Rana

  • QA: Designer's operation to Add one more Field to display in Query Result Web Part

    QUESTION ABOUT Query Result Web Part presentation +1 Field
    I'd be looking at a property of Web Part to look up Discussion Board through Query Result Web Part. Currently it displays 'Title' column of Discussion Board, and my caring requirement is presentation customization to hold double
    columns of 'Title'+'Updated Date'. How could I add one more field 'Updated Date' to display in addition to that preexisting 'Title' field?
    Any procedural steps to realize how to add Filed to display in Query Result Web Part?

    Hi Yoshihiro,
    As I understand, you want to add the field to display in Query Result Web Part in SharePoint 2013.
    Which web part does you use? Content query web part or search results web part?
    If you use search results web part, you could edit the discussion board result template and add the updated field in the template.
    You could go to Design Manager: Edit Display Templates (site setting-> look and feel->design manager->edit display template), download the Discussion Item.htm file, and edit the file. 
    After editing, upload the file.
    The articles below are about how to modify an existing Display Template in SharePoint 2013.
    http://www.learningsharepoint.com/2012/09/17/sharepoint-2013-the-new-display-templates-for-styling-your-content/
    http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
     If you use content query web part, you could edit the content query web part, in the Property Mappings section select the “Change the mapping of managed”, and add the “modifiedOWSDATE” (it means the last modified date) in the line, after
    that you could see the update date under the title.
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Text value is not getting displayed in Query designer !!

    Dear experts..,
    i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
    please help me friends....
    i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
    whether can i get text display or not???
    can any one help me in this regard???
    SAP Reply----
    Hello kumar,
    After another analysis I have to inform you about general concept of
    "compounded characteristics".
    A compounded characteristic bounds two characteristics. The technical
    name is generated by both technical names of the two characteristics
    combined by two underlines "__".
    An individual text is only available for one single combination of both
    characteristics.
    Example:
    =======
    Compounded characteristic "Famous family name" is a combination of
    characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
    Values for Country: USA, Australia
    Values for Ethnic: Asian, Latino
    Possible value combinations with individual text:
    USA & Asian; text: "Ling"
    USA & Latino; text: "Sanchez"
    Australia & Asian; text: "Chu"
    Australia & Latino; text: "Garcia"
    (Keep in mind the individual text only valid for the specific
    combination.)
    In analogy to the issue that you reported, you want to restrict this
    compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
    combinations of the characters with an individual text.
    You select family name "Chu" and drag'n'drop it to the right side.
    Actually you can only restrict the right compounded characteristic. In
    our example you would restrict on characteristic "ETHNIC" with value
    "Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
    value combination Australia & Asian. But in the end it's just a
    placeholder(!) for any combination of characteristic "ETHNIC" and value
    #Asian#; in our example it could be USA & Asian "Ling" or Australia &
    Asian "Chu").
    By leaving the Selector the individual text is gone because now the
    context is lost between the two characteristics. You have just a
    restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
    specified for this restriction.
    You're right, it is confusing when "loosing" the text of a restriction.
    But accoring to the concepts of the compounded characteristics it
    is a correct behavior.

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • Display content query results horizontally

    Hi,
    Is there an easy way to configure the content query web part to display results horizontally?
    thanks,
    Sherazad

    Would this help?
    Rendering Content Query Web Part
    results in Table Layout
    Amit

  • Display SQL query in error text

    Using CFMX 6.1.
    Is it possible to get our error handler page to display the
    SQL query that fails and causes an error?
    If tried #error.sql# but it doesn't exist after a db
    exception. If I put a cftry around a particular query and then use
    cfcatch.sql within a cfcatch tag pair, it works fine. But given our
    error handler page is for the entire site, I can't use cfcatch, at
    least not the way the site is currently architected. I was hoping
    error.sql would work since my quick ref quide states that "Any
    cfcatch variable that applies to exception type can be accessed
    within the Error scope. But then it doesn't list Error.SQL or
    CFCATCH.SQL for that matter in any documentation I've seen, yet the
    later works in cfcatch tags.
    Any help would be appreciated.

    You don't have to place a CFTRY/CFCATCH around each query. I
    don't know how many pages you have in your application, but you
    could do something like the following:
    1. Replace <body> with <body><CFTRY>
    2. Replace </body> with the following
    <CFCATCH TYPE="database">
    <CFMODULE TEMPLATE="customErrorPage.cfm"
    sqlStatement="#CFCATCH.Sql# " message="#CFCATCH.message#">
    </CFCATCH>
    </CFTRY>
    </body>
    You can use a global search-and-replace utility, such as
    SR32, to make this task painless. Click
    here to go to the SR32
    site.

  • PRODUCTION ORDER NO. DISPLAY IN QUERY REPORT

    Hello Sir,
    I need to display production order number in the following query, can you please reply that query,
    select distinct t1.DocNum,t1.DocDate,t1.NumAtCard,t1.CardName,t4.U_desc,t4.DocEntry[GRNNO],t4.U_recqun[GRN-QTY],t6.U_PREACPT[Accepted],t6.U_BALQTY[Waiting for QC]
    from OPDN t1 inner join PDN1 t2 on t1.DocEntry = t2.DocEntry inner join [@SU_SUBCONGRN] t3 on t1.DocNum= t3.U_grnno
    inner join  [@SU_SUBGRNLINES] t4 on t3.DocEntry = t4.DocEntry inner join [@TI_GRNINSPECTION] t5 on t3.DocNum = t5.U_SUBGRN
    inner join [@TI_GRNLINE]t6 on t5.DocEntry = t6.DocEntry
    where t1.DocDate>=[%0] and t1.DocDate<=[%1] and  t1.CardName=[%2]
    Reagards
    Pushpa

    Hi Pushpa......
    Is there any relation between Production Order table and any of the table taken in your query report?
    If yes then please let me know.......
    Then only you can get it linked with Production order......
    Regards,
    Rahul

Maybe you are looking for