0FI_AR_4 not fetching delta

hi experts,
i am having problem with 0fi_ar_4, i have run the init with data transfer for this datasource and it went successfully, But delta values are not able to fetch, delta infopackage brings 0 records with green status.
In rsa7 there are no records for this datasource. I have checked in smq1 also no luws are stuck there
I have 0fi_gl_4 data source which is working fine with full and as well as delta.
I have checked in bwom2_timest which has last updated information for 0fi_ar_4 and delta also. But the values in delta run are not fetching.
The same data source is working fine in development system. I can able to see delta records in rsa7 against this 0fi_ar_4 DS.
please suggest me ..

Hi..
For FI datasources you will not be able to see any data in the delta queue..
Data will get populated in the delta queue during extraction..
After init...it writes the entries into the time stamp table BWOM2_TIMEST in the SAP R/3 System with a new upper limit for the time stamp selection...
Depending on that data will get fetched from the table BKPF based on creation date (CPUDT)...
For 0FI_AR_4 (AR- line items )Selections are made from tables BSID/BSAD (Accounts Receivable)
This is for new entries.......
For changed records data will get fetched from the table BWFI_AEDAT , depending on the time stamp table BWOM2_TIMEST....
Check the following blog :
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
Regards,
Debjani.........

Similar Messages

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Item will not fetch values

Hi all,
I have a number of fileds on my page that are entered with user-input. Then, I have one hidden-protected field that is composed of 2 concatenated values from another field, so that I can use this field in the automatic row update process.
However, this composed field does not always (sometimes it does..) fetch the data from the user-input fields, so then month and year are left blank in the composed field and I get an ill formed date (01-- instead of 01-10-2008). A part of the debug shows that the user input fields are filled with data, but the composed field does not fetch the data (see bold parts):
Debug
0.01: A C C E P T: Request="CREATE"
0.01: Metadata: Fetch application definition and shortcuts
0.01: NLS: wwv_flow.g_flow_language_derived_from=FLOW_PRIMARY_LANGUAGE: wwv_flow.g_browser_language=nl
0.01: alter session set nls_language="DUTCH"
0.01: alter session set nls_territory="THE NETHERLANDS"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator=","
0.01: ...NLS: Set NLS Group separator="."
0.01: ...NLS: Set date format="DD-MM-RR"
0.01: ...Setting session time_zone to -05:00
0.01: Fetch session state from database
0.02: ...Check session 4402719362367456 owner
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 21436, page 5
0.02: ...Validate item page affinity.
0.02: ...Validate hidden_protected items.
0.02: ...Check authorization security schemes
0.02: Session State: Save form items and p_arg_values
0.02: ...Session State: Save "P5_ID" - saving same value: ""
0.02: ...Session State: Save "P5_VS_ID" - saving same value: "10"
0.02: ...Session State: Save "P5_VERBRUIK" - saving same value: "370"
*0.02: ...Session State: Save "P5_MAAND" - saving same value: "10"*
*0.02: ...Session State: Save "P5_JAAR" - saving same value: "2008"*
0.02: ...Session State: Save "P5_USER_ID" - saving same value: "241"
_0.02: ...Session State: Save "P5_MAAND_OPNAME" - saving same value: "01--"_+
0.02: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.02: Branch point: BEFORE_COMPUTATION
0.02: Computation point: AFTER_SUBMIT
0.02: Tabs: Perform Branching for Tab Requests
0.02: Branch point: BEFORE_VALIDATION
0.02: Perform validations:
0.02: ...Item Not Null Validation: P5_VS_ID
0.03: ...Item Not Null Validation: P5_VERBRUIK
0.03: ...Item Not Null Validation: P5_MAAND
0.03: ...Item Not Null Validation: P5_JAAR
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Process Row of MAANDVERBRUIK": DML_PROCESS_ROW (AFTER_SUBMIT) #OWNER#:MAANDVERBRUIK:P5_ID:ID|IUD
0.03: Show ERROR page...
0.03: Performing rollback...
/Debug
To compose the P5_MAAND_OPNAME field I do the following:
Source type: Database column
Source value or expression: MAAND_OPNAME (name of the db column)
Default value: '01-'||:P5_MAAND||'-'||:P5_JAAR
Defaukt value type: PL/SQL expression
Is this not the right approach? It should work and it does occasionaly, but more often it doesn't...

Hi Voxie,
Your approach doesn't work, because you use the Default Property of your item which is evaluated on rendering the page. What you need is a computation which runs right before the insert-process.
Peter

Values r not fetch in internal table

Hi Frds
In my report the values are not fetching in the internal table ICOSP
This is my program ,kindly correct my mistake.
DATA : WBS LIKE VBAK-PS_PSP_PNR.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS PROJECT FOR WBS.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
DATA: BEGIN OF IVBAK OCCURS 0,
      VBTYP LIKE VBAK-VBTYP, "SD document category
      AUART LIKE VBAK-AUART, "Sales Document Type
      NETWR LIKE VBAP-NETWR, "NET VALUE OF THE ORDER ITEM
      WAERK LIKE VBAK-WAERK, "SD document currency
      PS_PSP_PNR LIKE VBAP-PS_PSP_PNR, "WBS Element
      END OF IVBAK.
DATA: BEGIN OF IPRPS OCCURS 0,
      PSPNR LIKE PRPS-PSPNR, "WBS Element
      POSID LIKE PRPS-POSID, "WBS Element
      OBJNR LIKE PRPS-OBJNR, "Object number
      PSPHI LIKE PRPS-PSPHI, "Current project number
      END OF IPRPS.
DATA: BEGIN OF ICOSP OCCURS 0,
      OBJNR LIKE COSP-OBJNR,
      GJAHR LIKE COSP-GJAHR,
      WRTTP LIKE COSP-WRTTP,
      BEKNZ LIKE COSP-BEKNZ,
      WTG001 LIKE COSP-WTG001,
      WTG002 LIKE COSP-WTG002,
      WTG003 LIKE COSP-WTG003,
      WTG004 LIKE COSP-WTG004,
      WTG005 LIKE COSP-WTG005,
      WTG006 LIKE COSP-WTG006,
      WTG007 LIKE COSP-WTG007,
      WTG008 LIKE COSP-WTG008,
      WTG009 LIKE COSP-WTG009,
      WTG010 LIKE COSP-WTG010,
      WTG011 LIKE COSP-WTG011,
      WTG012 LIKE COSP-WTG012,
      WTG013 LIKE COSP-WTG013,
      WTG014 LIKE COSP-WTG014,
      WTG015 LIKE COSP-WTG015,
      WTG016 LIKE COSP-WTG016,
     SUM TYPE CURRENCY ,
      END OF ICOSP.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF ITAB OCCURS 0,
      PSPNR LIKE VBAK-PS_PSP_PNR,
      NETWR LIKE VBAP-NETWR,
      END OF ITAB.
PERFORM IVBAK.
PERFORM IPRPS.
PERFORM ICOSP.
PERFORM MOVE_COSP.
PERFORM MOVE.
PERFORM FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM ALVDISPLAY.
FORM IVBAK.
SELECT VBTYP AUART NETWR WAERK PS_PSP_PNR FROM VBAK INTO TABLE IVBAK
       WHERE PS_PSP_PNR IN PROJECT AND
             VBTYP = 'G' AND AUART = 'ZPCQ'.
CLEAR: IVBAK.
ENDFORM.                    "IVBAK
FORM IPRPS.
SELECT PSPNR POSID OBJNR PSPHI FROM PRPS INTO TABLE
         IPRPS WHERE PRPS~PSPHI IN PROJECT.
CLEAR : IPRPS.
ENDFORM.                    "IVBAP
FORM ICOSP.
LOOP AT IPRPS.
SELECT OBJNR GJAHR WRTTP BEKNZ WTG001 WTG002 WTG003 WTG004 WTG005
    WTG006 WTG007 WTG008 WTG009 WTG010 WTG011
    WTG012 WTG013 WTG014 WTG015 WTG016
    FROM COSP INTO CORRESPONDING FIELDS OF TABLE ICOSP
      WHERE OBJNR = IPRPS-OBJNR AND WRTTP = '4'.
ENDLOOP.
CLEAR:ICOSP.
ENDFORM.
Thanks
Pari

hi,
try this Code
DATA : wbs LIKE vbak-ps_psp_pnr.
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME .
SELECT-OPTIONS project FOR wbs.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
TYPES: BEGIN OF ivbak,
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document Type
netwr LIKE vbap-netwr, "NET VALUE OF THE ORDER ITEM
waerk LIKE vbak-waerk, "SD document currency
ps_psp_pnr LIKE vbap-ps_psp_pnr, "WBS Element
END OF ivbak.
TYPES: BEGIN OF iprps,
pspnr LIKE prps-pspnr, "WBS Element
posid LIKE prps-posid, "WBS Element
objnr LIKE prps-objnr, "Object number
psphi LIKE prps-psphi, "Current project number
END OF iprps.
TYPES: BEGIN OF icosp,
objnr LIKE cosp-objnr,
gjahr LIKE cosp-gjahr,
wrttp LIKE cosp-wrttp,
beknz LIKE cosp-beknz,
wtg001 LIKE cosp-wtg001,
wtg002 LIKE cosp-wtg002,
wtg003 LIKE cosp-wtg003,
wtg004 LIKE cosp-wtg004,
wtg005 LIKE cosp-wtg005,
wtg006 LIKE cosp-wtg006,
wtg007 LIKE cosp-wtg007,
wtg008 LIKE cosp-wtg008,
wtg009 LIKE cosp-wtg009,
wtg010 LIKE cosp-wtg010,
wtg011 LIKE cosp-wtg011,
wtg012 LIKE cosp-wtg012,
wtg013 LIKE cosp-wtg013,
wtg014 LIKE cosp-wtg014,
wtg015 LIKE cosp-wtg015,
wtg016 LIKE cosp-wtg016,
sum TYPE currency ,
END OF icosp.
*DATA: ICOSP LIKE COSP OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF itab,
pspnr LIKE vbak-ps_psp_pnr,
netwr LIKE vbap-netwr,
END OF itab.
DATA : i_ivbak TYPE STANDARD TABLE OF ivbak,
       i_prps TYPE STANDARD TABLE OF iprps,
       i_icosp TYPE STANDARD TABLE OF icosp,
       wa_ivbak TYPE ivbak,
       wa_prps TYPE prps,
       wa_icosp TYPE icosp.
PERFORM ivbak.
PERFORM iprps.
PERFORM icosp.
*PERFORM MOVE_COSP.
*PERFORM MOVE.
*PERFORM FIELDCATALOG.
*PERFORM BUILD_LAYOUT.
*PERFORM ALVDISPLAY.
FORM ivbak.
SELECT vbtyp auart netwr waerk ps_psp_pnr FROM vbak
INTO TABLE i_ivbak
WHERE ps_psp_pnr IN project AND
vbtyp = 'G' AND auart = 'ZPCQ'.
ENDFORM. "IVBAK
*&      Form IPRPS
*       text
FORM iprps.
SELECT pspnr posid objnr psphi
FROM prps INTO TABLE
i_prps WHERE prps~psphi IN project.
ENDFORM. "IVBAP
*&      Form ICOSP
*       text
FORM icosp.
IF i_prps[] IS NOT INITIAL.
    SELECT objnr gjahr wrttp beknz wtg001 wtg002 wtg003 wtg004 wtg005
    wtg006 wtg007 wtg008 wtg009 wtg010 wtg011
    wtg012 wtg013 wtg014 wtg015 wtg016
    FROM cosp INTO CORRESPONDING FIELDS OF TABLE i_icosp
    FOR ALL ENTRIES IN i_prps
    WHERE objnr = i_prps-objnr AND wrttp = '4'.
ENDIF.
ENDFORM.                    "ICOSP
Regards
Sandipan

Crystal Report not fetching data

Hi Everyone,
I have a crystal report which is not fetching any data but when I run the same sql in the database the data comes.Can anyone please help me in finding what exactly the problem is.
Regards,
Neeraj

Sorry we can't help you, not enough info.
See Rules Of Engagement.
What have YOU done to debug the problem?
Version of CR and any patches?
Database connecting to and any patches?
Version of Database Server and Client?
How are you connecting, ODBC, OLE DB or Native?
What error are you getting?
Don

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Lookup in transformation not fetching all records

Hi Experts,
In the routine of the transformation of a DSO (say DSO1), i have written a look-up on other DSO (say DSO2) to fetch records. I have used all the key fields of DSO2 in the Select statement, Still the look-up is not fetching all the records in DSO1. There is difference in the aggregated value of the Key Figure of both the DSOs. Please suggest, how can i remove this error.
Thanks,
Tanushree

hi tanushree,
The code which yu have written in the field routine for lookup is not fetching the data. you can debug the field routine code in the simulation mode of execution of DTP by keeping a break point after the transformation.
you can test the routine with out actually loading the data..
double click rule where you have routine and in the below you have option called test routine.
here you can pass input parameters..
i hope it will give you an idea.
Regards
Chandoo7

Net price not fetching to new PO thru' existing PO for same vendor

While creating new PO for a material system is not fetching "net price" data from already existing PO for same material against same vendor.
This is happening after attaching OMET settings in User authorisation.
How to solve this issue?

Hi,
This shoudl not happen but still you try in OMET - For the Key, allow indicator "Enter Conditions" and then check.
Also check if any key has been created in OMFI and assigned to user parameter EVO. - Here in OMFI, check under "Price Adoption" Tab, "Always Copy" radio button should be selected if you want to copy last PO price in current PO.

Operation does not fetch in process order

hi PP-Pi gru,
when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
another mater is when assign production profile in t- code CORU show the error massage " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
Rogers
Aqueel

Hi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter COR4 In planning screen. Please check. Also check the work scheduling view of material master.
Regards,
R.Brahmankar

How to extract data using DSources which do not support Delta

Hi forum,
Iam using a data source which does not support delta. In such a scenario what should i do For subsequent extractions.Will i have to opt for full load every time, if so then how will the double data records be treated. Pls help me out of this situation. In RSA6 if i click on the data source there i can find a check box for enabling delta , but again that is greyed out. If i want to change that what steps should i follow.
All the helpfull answers and solutions would be thanked by assigning full points.
Regards
Pallavi

Can you give me the data source name please.
If it is a standard Business Content Datasource and it does not support delta(or delta is not enabled) then you dont have any choice to modify the standard Datasources. In such cases you can create a Generic DS same as Standard DS and enable delta.
Hope this helps.
Praveen

JDBC Sender Adapter - NOT FETCHING RECORDS...

Hello Experts,
I know this was answered in a separate thread (JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED).
However, my question is, Is there a way that we can be notified if a channel has stopped fetching records?
or is there a reporting tool that can be used to check/monitor if a channel is not processing any messages?
Thanks & Kregards,
allar

Hi Sreedhar,
Thanks for your reply.
These case is not being captured by our alert configuration because its not throwing any error.
in the communication channel monitoring, we see only something like this..:
3/16/09 8:25:19 PM Processing started
3/16/09 8:34:20 PM Processing started
3/16/09 8:33:55 PM Processing started
3/16/09 8:32:54 PM Processing started
but no error is being displayed nor sent.
Also, there was a case that the channel just stopped fetching, even though everything is active.
example log:
3/12/09 8:32:54 PM Processing started
We're looking for ways on how we can trap these scenarios as early as possible, get us notified and perform adapter-lock release when needed.
Regards,
allar

People Picker JS Control not fetching all the users...

Hi,
I am using Java Script people picker control. It fetching information for users but not all. I used following code block to get the control working. Why is not fetching all the users?? Where as OOTB people picker fetches same user. This does not make sense.
My environment is SharePoint online.
// Run your custom code when the DOM is ready.
$(document).ready(function () {
// Specify the unique ID of the DOM element where the
// picker will render.
initializePeoplePicker('peoplePickerDiv');
// Render and initialize the client-side People Picker.
function initializePeoplePicker(peoplePickerElementId) {
// Create a schema to store picker properties, and set the properties.
var schema = {};
schema['PrincipalAccountType'] = 'User,DL,SecGroup,SPGroup';
schema['SearchPrincipalSource'] = 15;
schema['ResolvePrincipalSource'] = 15;
schema['AllowMultipleValues'] = true;
schema['MaximumEntitySuggestions'] = 50;
schema['Width'] = '280px';
// Render and initialize the picker.
// Pass the ID of the DOM element that contains the picker, an array of initial
// PickerEntity objects to set the picker value, and a schema that defines
// picker properties.
this.SPClientPeoplePicker_InitStandaloneControlWrapper(peoplePickerElementId, null, schema);
Here is the link from Microsoft explaining it.
How to: Use the client-side People Picker control in SharePoint-hosted apps: https://msdn.microsoft.com/en-us/library/office/jj713593.aspx
Appreciate any help or workaround here.
Thanks.

Hi,
In my case im usign customize people picker. it is better to use in delelopement since you have the control and customization.
I have used select2 (https://select2.github.io/examples.html) drop down control and create a people picker
You can use the same REST call to populate data.
function initApproversPicker(success, fail) {
var data = { results: [] };
var executor = new SP.RequestExecutor($$.getAppWebUrlUrl());
executor.executeAsync(
url: $$.getAppWebUrlUrl() + "/_api/web/siteusers",
method: "GET",
contentType: "application/json;odata=verbose",
headers: { "Accept": "application/json; odata=verbose" },
success: function (dt) {
$.each(JSON.parse(dt.body).d.results, function (i, ele) {
data.results.push({ id: ele.Id, text: ele.Title });
executor.executeAsync(
url: $$.getAppWebUrlUrl() + "/_api/web/sitegroups",
method: "GET",
contentType: "application/json;odata=verbose",
headers: { "Accept": "application/json; odata=verbose" },
success: function (dt) {
$.each(JSON.parse(dt.body).d.results, function (i, ele) {
data.results.push({ id: ele.Id, text: ele.Title });
$("#WFApprovers").select2({ data: data, multiple: true });
if (success) {
success();
error: function (d, errorCode, errorMessage) {
if (fail) {
fail();
utils.log(errorMessage);
error: function (d, errorCode, errorMessage) {
utils.log(errorMessage);
Melick Rajee http://melick-rajee.blogspot.com

SQD3 select options not fetching all the data?

Hi abapers,
standard SDQ3 tcode is not fetching all the data?
In this standard t.code how to find that for different Select-options, different data retrieval queries have been written?
where to find the select options conditions are written?
thans in advance

This could be an issue as ROWTERMINATOR and FIELDTERMINATOR are not well placed.
Use FORMAT FILE while using BULK INSERT.

Mail not fetching new data every 15 with 3g turned off

I had to turn 3g off in order to improve my reception and battery life. It seems to help somewhat, however I notice that the Mail application does not fetch new mail every 15 minutes like its setup to do. It works fine in 3g mode, just doesnt do it while its on edge. (I think it also works ok on wifi.)

Perhaps your in an area with awesome 3g reception but really bad Edge. Weird huh.

Cursor with in clause in not fetching any rows (happens rarely)

Hi Experts,
Applications: Oracle Apps 11.5.10.2
Data base version: 11.2.0.1.0
we are running concurrent programs (scheduled every day),
we obsereved one of cursor is not fetching any records (happens rarely);
please refer the cursor below.
CURSOR LCU_GET_ADJ_JN_CAT_DET IS WITH LCU_GET_ROWS_DETAILS AS(
      SELECT <columns1, columns1_1, columns1_2>
        FROM (SELECT <columns2> from table1 <conditions>
               GROUP BY <columns>
              UNION ALL
              SELECT <columns3> from table2 <conditions>
              GROUP BY <columns>)
       WHERE (columns1_1 <> 0 OR columns1_2 <> 0)
       GROUP BY <columns>)
      SELECT *
        FROM (SELECT ROW_DET.* FROM LCU_GET_ROWS_DETAILS ROW_DET),
             (SELECT COUNT(1) TOTAL_RECORDS,
                     SUM(columns1_1) TOTAL_CLOSING_DEBIT,
                     SUM(columns1_2) TOTAL_CLOSING_CREDIT
                FROM LCU_GET_ROWS_DETAILS ROW_SUM)
       ORDER BY <columns>;

Please enable trace/debug and check the log files then.
How To Get Level 12 Trace And FND Debug File For Concurrent Programs (Doc ID 726039.1)
How to enable and retrieve FND debug log messages (Doc ID 433199.1)
Thanks,
Hussein

0FI_AR_4 not fetching delta

Similar Messages

Maybe you are looking for