1.2 Bluetooth Update Broken... no more Bluetooth!

I ran the 1.2 updater, not only does it fail to update, but it also nerfed my old firmware so now I have NO Bluetooth. Nothing under system preferences, and the icon on the menu bar says "Bluetooth: Not Available". Its like it never existed?!

I'm having the same issues as everyone else with this Bluetooth Firmware Update 1.2 ...
FWIW, after updating to 10.4.4 my System Profiler is listing:
Apple Bluetooth Software Version: 1.7.0f18
Hardware Settings:
CostelloX:
Address: 00-0d-93-08-a9-20
Manufacturer: Cambridge Silicon Radio
Firmware Version: 1.526 (1.526)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 1 ($1)
HCI Revision: 526 ($20e)
LMP Version: 1 ($1)
LMP Subversion: 526 ($20e)
Device Type (Major): Computer
Device Type (Complete): Laptop Computer
Composite Class Of Device: 1057036 ($10210c)
Device Class (Major): 1 ($1)
Device Class (Minor): 3 ($3)
Service Class: 129 ($81)
Requires Authentication: No
So the software version number has gone up, and the firmware number is well above 1.2 ... Is this Bluetooth Firmware Update 1.2 even needed (in my case)? It may just be a fluke that it's listing in the Software Update panel. I think we might be better off just ignoring it. It would be nice if Apple could definitively tell us more about when you'd need this update and when you wouldn't... For everyone who is having this update fail, is your firmware version number about 1.2 (is it 1.5xx)?

Similar Messages

  • I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8.  How do I update to a more advanced version of OS X with a download?

    I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8.  How do I update to a more advanced version of OS X with a download?

    You need to go through 10.6.3 and 10.6.8 to get to 10.7 or 10.8. If you find that 10.6.8 isn't enough, open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
    (85026)

  • TS1702 why can't i update the app more than 50mb from itune but can throught wifi?

    I tried to update Apps more than 50mb through itune, but found the Apps which are needed to be update are mark "Downloaded" in iTune store.  Of course if the Apps mark "Downloaded" are not able to do anything with it.  On the other hand, I can simply use wifi to update the Apps, more than 50mb, throught my iphone instead of iTune.  Is there any problem with iTune or something wrong with my phone?

    In the App section of your itunes library ( NOT the sync pages) there is a button at the bottom which says Check for updates

  • I have been trying to update Bridge CC and it immediately goes to update failed - learn more which I click on and all it give me is download error. retry or contact customer support(49). I have retried about 5 times now. All other updates finished success

    I have been trying to update Bridge CC and it immediately goes to update failed - learn more which I click on and all it give me is download error. retry or contact customer support(49). I have retried about 5 times now. All other updates finished successfully,

    Hi Dennis,
    Please refer to the thread below where this issue has been addressed:
    Bridge Update failed customer support(49)
    Updates failing from CC errors U44M1l216 and 49 - anyone else getting these?
    Installation succeeded but a patch failed
    Regards,
    Sheena

  • I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Help
    I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?

    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!

  • I have osx 10.7.5 . i wanna know if can directly update to 10.9 as in previous version update asking for more version like if i hv to install 10.7.5 i must hv 10.7.4 ! very doubtful i m .. as in India its very difficult to dwnl 6gb

    i have osx 10.7.5 . i wanna know if can directly update to 10.9 as in previous version update asking for more version like if i hv to install 10.7.5 i must hv 10.7.4 ! very doubtful i m .. as in India its very difficult to dwnld 6gb.

    If Mavericks is supported by your machine you can download it for free via the App Store.

  • 2.0.2 Update - Calls dropping more than before

    Ever since I got the 2.0.2 update for my my 3G iPhone, I have had more calls get dropped and a worse signal (more static). It seems like my phone keeps switching between 3G and the Edge Network every couple hundred yards when moving or every 5 minutes when stationary. Is anyone else having this problem? Is there a fix out for this?

    2.02 is a no go then.
    Good thing I click on the link before I went to Next.
    But where are the release notes? (you know - like specific fixes)
    Does it changes/shortens the timeout sessions on the 3G network?
    Will it restrict/change certain e-mail protocols?
    Does it still brick jailbreakers?
    Must've reduced the radio watts. To satisfy battery complaints. Turn off the dang Bluetooth! The 2.4Ghz has been a greater improvement to my iTouch battery consumption.
    Could be a Ping or Echo overflow?(ok i'm just trowing stuff on that one)

  • Lenovo System Update Broken, IA.exe command path error

    Hello, I've been fighitng with Lenovo system update through out the years for various issues, but I believe I've found a new error that all my searching doesn't seem to cover. When I do a fresh image of Windows 8.1 and install system update, it works for the first and sometimes second run and reboot. But after these first uses, it completely fails, along with System Health and some of the other Lenovo software. I've managed through some trial and error and looking through the logs to narrow this down to the IA.exe program and the command being sent to gather information. Here is the command found in the tvsu logs: /execute ia.exe /arguments -filename$C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin$ -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory $C:\Program Files (x86)\Lenovo\System Update\egather\$ /type COMMAND /timeout 300000 Immediately after this is called, the system calls TVSUCommandLAuncher, and then reports RC eGAther: -1 and that it failed to execute TVIA program and quits. My error in System Update is that it couldn't gather client information. So I took the command and tried to run it myself, having to remove the /execute switch as I wasn't calling this some somewhere else. ia.exe /arguments -filename$C:\Program Files (x86)\Lenovo\System Update\egather\sysrecomin$ -probes REGIONAL_SETTINGS GATHERER_INFORMATION SYSTEM_SUMMARY -local /directory $C:\Program Files (x86)\Lenovo\System Update\egather\$ /type COMMAND /timeout 300000 This when run, will throw "Error: The given path's format is not supported" message. I tinkered with the command line for a while before I figured out what was going on. It seems the "$" being used for the Filename and Directory settings are no longer functioning, and causing the program to not parse properly. I replaced all the $ with " and suddenly I can run the command manually, and it generates the output file properly. Now though I'm still stuck, as there's no way for me to edit the command being called by system update, so it will always improperly format its call and then fail. Does anyone have any idea what in the world is going on here, I can't figure out what would be causing this and why it works the first one or two launches, then never works again. This also causes any lenovo software that uses IA to freeze up, like the system health software from lenovo.

    No, I don't do a silent install due to the license/eula agreements not functioning properly unless you've got an on-site repository.  So its just after imaging via SCCM I'd install system update, run it once to get things installed, and then when I would attempt to run it again, or lenovo system health, they'd be permanently broken.
    On this topic though I believe I sort things out.  I was having issues with the systems later that turned out to be two corrupt files dealing with Windows Store app, and using SFC and DISM to try and repair them fails.  After a lot of searching around I found that someone with Windows 10 preview had the exact same two files corrupted, so my thinking is there's some windows update out there causing issues, and the IA.exe program is affected by these corrupted files.  
    I had to get my win8.1 Install.wim file from the server, and then direct my broken system to use that as the source to do a dism cleanup and restorehealth.  Once it completed it repored it was able to fix the two files and I've not had any more problems and was able to capture the images (previously capture failed because sysprep reported the OS wasn't in a good state). 
    I've still not gone and tried to install the realtek audio driver that I know caused the break, but thats just due to time limits with the project, if I have some time I'll try and install and see if things still function afterwards.  
    So to break down the events:
    Clean Win8.1 Retail image, used SCCM to deploy onto a machine, run windows updates on the machine and install Lenovo System Update.  Things looked okay until I would try to run System update a second time after rebooting, then it was broken due to IA not being able to gather data.  Later after SFC and DISM scans was able to see that two files were being reported corrupt and unfixable, one I know is related to Store app, other I think is a library file for the Apps.  
    Fixed the files by getting the Install.wim from my iso file, telling the system to use that for the source as the online sources weren't working.  Dism was then able to fix the two files and I could successfully sysprep/capture the system with SCCM tools.  

  • My is Adobe Updater broken?

    Hi guys,
    My Adobe CS3 Updater is broken for some reason or another. It has been asking me to update to Adobe Acrobat 8.1 for a while now. Each time I accept for it to update, the thing does not actually work. Whatever happens, is is a continual loop of broken notification and updating. I know this whole thing is being caused by a corrupt file somewhere, I just do not know which one it is and where I can find it.
    This should be a very simple problem to fix.
    Thanks in advance,
    Liberator.

    Sorry, I should have been more clear in what has happened, and what I have tried.
    This update problem has been happening for a while. This has also not been the first problem to do with things being broken on this computer. Finder, system preferences and Safari (among others) have all been partially broken before. These problems have been in contrast to another account on the same computer that has had no problems with anything. The Adobe Updater for the Acrobat 8.1.4 update was done successfully. Acrobat (on the other account) is now more updated; it is currently at 8.1.5. No matter how many times I click on "Install", the update does not work. I was initially thinking it was a permissions and an Adobe + system files corruption, or at least something like that. I am still thinking that, although of course I cannot fix the problem myself.
    Thanks, Lib.

  • App store updates broken regarless of device or iOS version for days now?

    Your Apple App store updates are just plain broken.(period)! It doesn't matter the device or the iOS release. 
    I have various devices, ipod Touch(s) several versions, iPhones, Ipads several versions and it makes no different which iOS or device;  some are at 3.1, some are at 5.1 and some are at iOS6.  All show app updates, NONE seem to get conected or work by staying connected.
    I have done hard resets on all devices(more than once),  and if you delete and APP  you can NOT stay connected to re-download the APP;  update times out right after it starts to update and then quits...  It doesn't matter if it is a single update or Update ALL  and it doesn't matter which APP.
    you might can get one to update if you like try 20 times.....  this has been going on for at least 4 days now.  Apple PLEASE get this FIXED or provide a work around via support announcement / notes.....  You can't download then either as it times out so this is costing you Apple money.
    Thank you...

    Unfortunately, these are strictly user to user forums - no Apple employees here. You can use this to send them feedback (there are several other feedback links on that page depending on which one you want to use):
    http://www.apple.com/contact/feedback.html

  • Software update issues - made more problems for me

    My Q10 just downloaded a new Software release 10.1.0.4189
    I was excited because I had hoped it would solve the issue of the ring tones NOT working for TEXT messages.
    NOT ONLY did it not correct that...
    1. BUT I lost all of my videos and pictures in the Media Hide APP...
    2. It duplicated several contacts... not all but some... so that is weird... and honestly it seems to duplicate contacts that are listed by a Business Name.... those were the majority of duplicates.
    3. The little pictures I assign to contacts and the logos for businesses... are messed up... at least the LOGOS for businesses are not self sizing so you can not tell what it is in the contact screen (none of these were issues yesterday)
    4. When I try to delete the duplicates from the contacts... the trash icon jumps to the left when I touch it... and it will NOT let me delete the duplicates... so I am forced to do it thru my OUTLOOK on the computer
    I just downloaded the software update 2 hours ago... so I have no idea what else may have gone WRONG with it...
    I do not even know what this update was supposed to be fixing... because the text ring tones are all I am MOST upset about loosing and it looks like the wording on the contacts changed to say EMAIL ring tones... instead of text... and I do NOT have one single BBM contact.... so TEXT and BBM should share that feature... since EMAIL is now a stand alone contact ringtone... so many features center around BBM and I have no blackberry friends...

    It just seems bizarre that the text/ringtone issue would not immediately be resolved.  Text is the way more people communicate today over vocal calls...and..the feature existed in previous systems. How could it not exist in their newest product??
    You had mentioned u downloaded the newest update with the hope the text issue was resolved.  Why did you think it would be?  Did they ..BB..say they had a fix?
    Another issue..that perhaps someone could help me with on same issue is that when I text using the q10...the text space is two lines....and if that a text happens to run three lines ...i can no longer see what I am texting...until..it is sent.  Thus makes no sense..as this too was not part of the previous sysems where you were ALWAYS on last letter typed.  Anyone else that that issue and perhaps know the fix?

  • HT4623 I have IPAD 2.  i want to update to a more current version of IOS, but I don't have a "software update" option.  Does anyone know how I should go about updating my ipad.  I bought it in April, 2011.

    I have an IPAD 2 that I purchased two years ago.  I would like to get a more current version of the IOS so that I can download games, etc.  The instructions say to go to General and select Software Download.  I do not have that option listed in my General area.  Does anyone know how I should go about getting the more current IOS?  Also, will the download hurt my IPAD.  I was told it might damage my operating system.  Thank you, Marilyn

    No. The Download is the operating system. It won't damage it because its released by Apple and signed to work on it.
    It will update the Operating system to the newer version.
    In the Article you came from:
    iOS: How to update your iPhone, iPad, or iPod touch
    Scroll down to the section titled: Update your device using iTunes

  • [SOLVED][GNOME] 3.14 update broken

    Hi all,
    Just upgraded my system to the latest 3.14 release and now everything is broken. GDM will not start and I cannot start a GNOME session directly via startx.
    Is anyone else having this issue?
    This is on an Intel Haswell based system, by the way.
    journalctl shows the following:
    Oct 16 09:44:43 minime gnome-session[708]: Unrecoverable failure in required component gnome-shell.desktop
    Last edited by cabrey (2014-10-16 14:16:17)

    I also get an error when trying to start a GNOME session after the upgrade. I removed my infinality patched freetype2 and fontconfig and installed the latest ones, with no change. using SLiM as my login manager because GDM isn't compatible with the Catalyst graphics drivers.
    this is most of the output of journalctl | grep gnome:
    10月 16 21:27:03 fleecey slim[311]: gnome-session - GNOME
    10月 16 21:27:03 fleecey slim[311]: env GNOME_SHELL_SESSION_MODE=classic gnome-session --session gnome-classic - GNOME Classic
    10月 16 21:27:05 fleecey slim[311]: gnome-session - GNOME
    10月 16 21:27:05 fleecey slim[311]: env GNOME_SHELL_SESSION_MODE=classic gnome-session --session gnome-classic - GNOME Classic
    10月 16 21:27:27 fleecey gnome-session[512]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
    10月 16 21:27:27 fleecey gnome-session[512]: GPG_AGENT_INFO=/run/user/1000/keyring/gpg:0:1
    10月 16 21:27:27 fleecey gnome-session[512]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
    10月 16 21:27:37 fleecey gnome-session[512]: X Error of failed request: BadValue (integer parameter out of range for operation)
    10月 16 21:27:37 fleecey gnome-session[512]: Major opcode of failed request: 141 (RANDR)
    10月 16 21:27:37 fleecey gnome-session[512]: Minor opcode of failed request: 13 (RRChangeOutputProperty)
    10月 16 21:27:37 fleecey gnome-session[512]: Value in failed request: 0x99
    10月 16 21:27:37 fleecey gnome-session[512]: Serial number of failed request: 299
    10月 16 21:27:37 fleecey gnome-session[512]: Current serial number in output stream: 301
    10月 16 21:27:37 fleecey gnome-session[512]: gnome-session[512]: WARNING: App 'gnome-shell.desktop' exited with code 1
    10月 16 21:27:37 fleecey gnome-session[512]: WARNING: App 'gnome-shell.desktop' exited with code 1
    10月 16 21:27:37 fleecey gnome-session[512]: X Error of failed request: BadValue (integer parameter out of range for operation)
    10月 16 21:27:37 fleecey gnome-session[512]: Major opcode of failed request: 141 (RANDR)
    10月 16 21:27:37 fleecey gnome-session[512]: Minor opcode of failed request: 13 (RRChangeOutputProperty)
    10月 16 21:27:37 fleecey gnome-session[512]: Value in failed request: 0x99
    10月 16 21:27:37 fleecey gnome-session[512]: Serial number of failed request: 299
    10月 16 21:27:37 fleecey gnome-session[512]: Current serial number in output stream: 301
    10月 16 21:27:37 fleecey gnome-session[512]: WARNING: App 'gnome-shell.desktop' exited with code 1
    10月 16 21:27:37 fleecey gnome-session[512]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    10月 16 21:27:37 fleecey gnome-session[512]: gnome-session[512]: WARNING: App 'gnome-shell.desktop' exited with code 1
    10月 16 21:27:37 fleecey gnome-session[512]: gnome-session[512]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    10月 16 21:27:37 fleecey gnome-session[512]: Unrecoverable failure in required component gnome-shell.desktop
    10月 16 21:27:38 fleecey gnome-session[512]: Failed to play sound: File or data not found
    10月 16 21:27:38 fleecey gnome-session[512]: (nm-applet:662): GLib-GObject-WARNING **: The property GtkButton:use-stock is deprecated and shouldn't be used anymore. It will be removed in a future version.
    10月 16 21:27:38 fleecey gnome-session[512]: (nm-applet:662): GLib-GObject-WARNING **: The property GtkSettings:gtk-button-images is deprecated and shouldn't be used anymore. It will be removed in a future version.
    10月 16 21:27:38 fleecey gnome-session[512]: (nm-applet:662): GLib-GObject-WARNING **: The property GtkImage:stock is deprecated and shouldn't be used anymore. It will be removed in a future version.
    10月 16 21:27:39 fleecey gnome-session[512]: (nm-applet:662): GLib-GObject-WARNING **: The property GtkSettings:gtk-menu-images is deprecated and shouldn't be used anymore. It will be removed in a future version.
    10月 16 21:27:40 fleecey gnome-session[512]: Entering running state
    10月 16 21:27:42 fleecey gnome-session[512]: (zeitgeist-datahub:672): GLib-GObject-WARNING **: invalid (NULL) pointer instance
    10月 16 21:27:42 fleecey gnome-session[512]: (zeitgeist-datahub:672): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
    EDIT: this topic seems more relevant to my issue. I'll move there instead.
    Last edited by parashep (2014-10-17 05:03:04)

  • Problem in CRM_ORDER_MAINTAIN for updating qty in more than 1 line item .

    Hi abapers,
    I am using BAPI CRM_ORDER_MAINTAIN to update quantity. Its updating the quantity properly if there is single line item for a transaction .If more than 1 line item is there then its throwing an exception* "Document is being distributed - changes are not possible"*.
    Scenario:
    I have a itab  which is having 2 line items for a transaction. i run a loop pass the pass the required parameters in CRM_ORDER_MAINTAIN ,do CRM_ORDER_SAVE , BAPI_TRANSACTION_COMMIT for the 1st line item. When i run the 2nd loop, in  CRM_ORDER_MAINTAIN it gives an exception saying NO_CHANGE_ALLOWED for the same transactions 2nd line item. leaving the quantity unchanged for both the line items. What may be the problem?
    Note: We cannot say how many line items are there for an transaction. so no chance of grouping all items at a time and saving at a time.
    Regards,
    Navin

    Hi Navin,
    Why its not possible to use CRM_ORDER_SAVE only once. I think its possible. Call CRM_ORDER_MAINTAIN in loop for all the line item in transaction and after that call CRM_ORDER_SAVE once. Pls follow the below sample code.
    loop at it_item.
    call CRM_ORDER_MAINTAIN. (Here append data for all the line items and miantin the transaction).
    emdloop.
    After endloop call CRM_ORDER_SAVE. Also you can add some wait after CRM_ORDER_SAVE, In order to avoid locking issue.
    PLs let me know where you are trying to use CRM_ORDER_MAINATIAN ? In any BADI or Z program ?
    Regards,
    Amol.

  • Update is taking more time

    Hi
    update TBLMCUSTOMERUSAGEDETAIL set UNUSEDVALUE=0 where CUSTOMERUSAGEDETAILID is not null;
    in this table only 440 record is there but is taking more time and not execute?
    what is the reason for this.
    your early response is appericated.
    Thanks in advance
    Edited by: user647572 on Sep 13, 2010 4:13 AM

    Steps to generate 10046 trace
    SQL >alter session set max_dump_file_size=unlimited;
    SQL >alter session set timed_statistics=true;
    SQL >alter session set events '10046 trace name context forever, level 12';
    SQL > ------- execute the query-------
    SQL > ---If it completes just EXIT
    A tracefile will be generated in your user_dump_dest
    Format this file with TKPROF
    $ tkprof <output_from_10046> <new_file_name> sys=no explain =<username>/<password>
    *username password of the user who executed the query
    Upload ALL the tracefiles to Metalink.
    1) Check on what is waiting for?
    2) Anything Else where its more time? parse execute or fetch?
    This is how you can do analysis
    Kind Regards,
    Rakesh Jayappa
    Edited by: Rakesh jayappa on Sep 13, 2010 11:52 PM

Maybe you are looking for