1 Thai Character printout wrongly but preview report good

HI Experts,
I have a problem when printing Thai Characters in report.
When preview the thai characters displayed perfectly.
But when printout - Only 1 character is printed wrongly.
Example: สำ
it will be printed as ส0
I've used other printer to test and same results appeared.
I've also print other printing but it prints correctly.
Not too sure if its the printer problem now or the report.
Some of the Thai words are maintained in the translation and some retrieve from table. But it prints out incorrectly.
Any ideas?
Thank You in advance

HI Rimpa,
Thanks for the reply.
I tried the link - but its not quite solve my problem because it is not a form which I am creating.
The problem arised only to this report that I modified from the standard program - S_ALR_87009895 - Input Tax Report. Another form which I had created prints out perfectly.
I dont think its the form that is the cause of the problem because there are printing which extracts directly from the table field to print.
Any guidance to check on the Output Device type or the printer setting?
ThankYou.

Similar Messages

Crystal Report Oracle ODBC driver invalid Thai character display problem

Hi,
   My server has CR Oracle ODBC 5.1 installed on last week. We have several reports in the servers which called by our Application to export to text file and pdf file. Sometimes, the output (both text file and pdf file) can't display Thai character correctly. The text file show Thai character in question mark and pdf file show in square box. This problem occur randomly and disappear without doing anything. Sometimes the problem occur for an hour and gone but sometimes occur 10-15 minutes and gone. This problem also not happen every days. Once the problem occur, all reports with Thai character will fail.
   However, we have another server installed the same Application, same OS level, same OS patches and same CR Oracle ODBC driver version installed on the same time as above server (the problem server). This server does not have any problems.
   Any suggestions would be appreciated.
Best Regards,
Noppadon S.

Hi Noppadon,
Thank you for the info. If it happens randomly in their application then it's something they need to debug. Could even be in the ODBC driver.
I suggest you tell them that because it works sometimes it shows the issue is likely in their software because if it failed all the time then it would be in Crystal dll's. They need to debug the problem, suggest they use tools like Process Monitor from www.sysinternals.com to step through to see where or what part is failing. If they having logging abilities that may help to find out what step is failing and in which API.
At this point we have no way of determining where the problem is, it's failing in their application and no one but them know what or how they are using CR runtime files.
If you can duplicate the problem using Crystal Report Designer then it's our problem, if not they have to help you to show us it is a CR issue.
Sorry we can't be of more help but without know their code we can't suggest anything to try. Suggest they log a call with support here to help them debug the problem if they don't know what to do.
Thank you
Don

MLGR to send a doc 'Report Goods Receipt to Buyer' proccessed wrong

Hi
We are using output type MLGR to send a doc 'Report Goods Receipt to Buyer' which is defined
under->Output Types->Mail title and texts.
Its 'Proccessing Routine' is: RSNASTSO
Form Routine is: SAPOFFICE_AUFRUF
All is well when we use MB02 MLGR,'Simple Mail',MP, UserName
It sends the email to SAPConect.
BUT the form comes with the definitions not with the actual values.
Like so:
INCLUDE MMIM_SE71_NEUER_EDITOR_MAIL2 OBJECT DOKU ID TX LANGUAGE EN
$DATE$, $TIME$
$SGF$ oder $SGH$ $EKKO-ERNAM$ !
A goods receipt for your purchase order $MSEG-EBELN$
item $MSEG-EBELP$ has just been entered.
Material: $MSEG-MATNR$ $EKPO-TXZ01$
Quantity delivered: $MSEG-ERFMG$
Vendor: $MSEG-LIFNR$, $AM07M-NAME1$
Posting date: $MKPF-BLDAT$
$MFG$
$MKPF-USNAM$
Reg's
Edan

1. use variables '&' instead of '$'
2. In transaction M706 for output type MLGR, make sure you have maintained the include by going in the long text, Choose Goto -> Change Editior, and maintain the form here :
"A goods receipt for your purchase order &MSEG-EBELN&
item &MSEG-EBELP& has just been entered.
Material: &MSEG-MATNR& &EKPO-TXZ01&
Quantity delivered: &MSEG-ERFMG&
Vendor: &MSEG-LIFNR&, &AM07M-NAME1&
Posting date: &MKPF-BLDAT&
&MFG&
&MKPF-USNAM&"
Then in MN22, delete the earlier condition record and create a new condition record in MN21
Here in the Communication in the MENU select
Goto -> Execution Parameter. You reach the dialog box Change Execution Parameter. Here you maintain the following data for mail processing:
Execution type        U   Transaction with memory
Execution element     MB03
Memory ID                  MBN
Par name: RM07M-MBLNR      Parameter value: MSEG-EBELN
Save
Then create a PO (please remember to click on the GR message in the header), and create a GR against the PO.
In SBWP, you will get the values and not definitions this time for the message created.

I do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?

i do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?

Since you mention that the "modem" (which I'm guessing is a wireless router) is not close to the Time Capsule, I'm guessing a second time when I ask if you are trying to configure the Time Capsule to "join" your network using wireless only.
Is that correct?

To see Print Preview for Goods Issue

Hi!
I have attached the custom SAPScript in NACE for GI. But while doing Goods Issue Posting (MIGO_GI), I should get some printout of Goods Issue Document. But I am not getting any printout but the material document is getting created. I went to SPRO and maintained Print Indicator for movement Type 221(Consumption for project from warehouse). Please advice if any other configuaration change/s I need to do or any more suggestion.
Thanks,
Atanu

Hi Atanu,
In the condition record itself there is a communication setting where you have to define the device ( printer) on which you want to print and also there is a check box ("Print immediately"). If this check box is not checked then you can print from spool ( transaction SP01 ) or will have to schedule a job to print from spool. If you want to print while saving material document just click that check box in condition record.
( Also check if you can print anything else on the printer you have defined in communication setting of condition record. Try with any report list).
Cheers

Thai character problem - iPlanet Web Server 4.1. Please help!

Hi all,
I am experiencing a very annoying problem with iPlanet Web Server 4.1 running on Solaris 5.8. I have a web application with Thai character set encoding support. I have a JSP which is a data entry screen page (using FORM tag) and the data submission can contain Thai characters, however I get HTTP error 400 (bad request) when I submit the form using the client machine running Windows OS other than Windows 2000. I tested in Windows 98 and Windows XP, always get that HTTP error 400.
I have two boxes, Web server machine and App server machine. If I bypass the iPlanet Web Server directly connect to my application server (the app server software has built-in web server, but not suitable for production, that's why I use iPlanet Web Server 4.1) I don't get any problem at all. So I suspect something wrong with the iPlanet Web Server software. I also tested my web application in Linux environment with the same iPlanet Web Server 4.1, but the problem is not there.
Thus, did anyone ever experience the same thing? Can anyone shed some light to resolve this problem? Is the problem reside in the client machine or in the server environment?
Any help is highly appreciated.
Regards,
Jacky.

Try using different values for StrictHttpHeaders in your magnus.conf. Valid values are:
StrictHttpHeaders on (default)
StrictHttpHeaders relaxed
StrictHttpHeaders off

Print preview report running error in client workstation

dear all,
I face an issue in preview report in client,
The report is write in store procedure, using crystal report for the designer. I use OLEDB SQL native clilent.
My report is running well in server
the server os is windows server 2003 , SQL server 2008, SAP Business One 8.81 PL4,Australia localization.
But the problem is on the client work station, it can not preview. some clients only install pure SAP Business one client and using the windows 7.
I also run in windows XP client workstation, it runs well.
Should i install crystal report in client workstation?
Is there any driver or crystal report runtime that i must install first in client ?
Please provide me the link that i can download.
Thanks in advance
Regards
KK

Solved

Output Type MLGR, 'Report Goods Receipt to Buyer' not proccessed correctly

Hi
We are using output type MLGR to send a doc 'Report Goods Receipt to Buyer' which is defined
under->Output Types->Mail title and texts.
Its 'Proccessing Routine' is: RSNASTSO
Form Routine is: SAPOFFICE_AUFRUF
All is well when we use MB02 MLGR,'Simple Mail',MP, UserName
It sends the email to SAPConect.
BUT the form comes with the definitions not with the actual values.
Like so:
INCLUDE MMIM_SE71_NEUER_EDITOR_MAIL2 OBJECT DOKU ID TX LANGUAGE EN
                                         $DATE$, $TIME$
$SGF$ oder $SGH$ $EKKO-ERNAM$ !
A goods receipt for your purchase order $MSEG-EBELN$
item $MSEG-EBELP$ has just been entered.
Material:           $MSEG-MATNR$ $EKPO-TXZ01$
Quantity delivered: $MSEG-ERFMG$
Vendor:             $MSEG-LIFNR$, $AM07M-NAME1$
Posting date:       $MKPF-BLDAT$
$MFG$
    $MKPF-USNAM$
Reg's
Edan

1. use variables '&' instead of '$'
2. In transaction M706 for output type MLGR, make sure you have maintained the include by going in the long text, Choose Goto -> Change Editior, and maintain the form here :
"A goods receipt for your purchase order &MSEG-EBELN&
item &MSEG-EBELP& has just been entered.
Material: &MSEG-MATNR& &EKPO-TXZ01&
Quantity delivered: &MSEG-ERFMG&
Vendor: &MSEG-LIFNR&, &AM07M-NAME1&
Posting date: &MKPF-BLDAT&
&MFG&
&MKPF-USNAM&"
Then in MN22, delete the earlier condition record and create a new condition record in MN21
Here in the Communication in the MENU select
Goto -> Execution Parameter. You reach the dialog box Change Execution Parameter. Here you maintain the following data for mail processing:
Execution type        U   Transaction with memory
Execution element     MB03
Memory ID                  MBN
Par name: RM07M-MBLNR      Parameter value: MSEG-EBELN
Save
Then create a PO (please remember to click on the GR message in the header), and create a GR against the PO.
In SBWP, you will get the values and not definitions this time for the message created.

Cannot display Thai. character in List box elements

Hi all,
I have set the Fonts to Ms San Serif to all items in a form, all items seems can display Thai. character correctly. For List box, it can display Thai also, but the elements in the selections cannot.
Does any expert know how to fix this ?
Thanks!

Hi Kinghow,
Thanks for your reply!
The problem still can't solve after set the auto csv code select "Yes". The excel file still can't display Thai character.
Am i using a correct way to generate excel file? Do you have any suggestion to export data to excel using pl/sql?
If i removed below part, then the excel file working well.
htp.tableOpen(cattributes=>'border="1",bordercolor="BLACK",align="CENTER"');
for x in (select srd_line_prop,srd_line_dtl from schd_rptd where srd_queue_no=:P401031_QUEUE_NO and srd_line_prop='H' order by srd_queue_no,srd_line_no)
loop
htp.tablerowopen(cattributes => 'bgcolor="#81F7F3"');
for i in 1..pkg_wwe.split_count(x.srd_line_dtl,'|') loop
if i = 1 then
htp.p('<TD nowrap align="center" width="70px" > <font size="2" face="arial" color="#088A08">');
htp.p(pkg_wwe.split(x.srd_line_dtl,'|',i));htp.p(' ');htp.p(' ');
htp.p('</TD>');
else
htp.p('<TD nowrap align="center" width="70px" > <font size="2" face="arial" color="#08088A">');
htp.p(pkg_wwe.split(x.srd_line_dtl,'|',i));htp.p(' ');htp.p(' ');
htp.p('</TD>');
end if;
end loop;
htp.tableRowClose;
end loop;
htp.tableClose;
I really do not have any idea on how to solve this problem. Is really strange on this problem.

Error in preview report using Crystal Report in SBO 8.81

Hi friends,
I face problem when preview report. I import all my report to server and test it to server. When i preview the reports, it can't run well. It preview the error like this.
Failed to Retrieved data from Database.
Failed to Retrieved data from Database.
Error in File Temp {..... LOTS OF LETTERS AND NUMBERS HERE}{..... LOTS OF LETTERS AND NUMBERS HERE}.rpt:
Failed to Retrieved data from Database.
I don't know , what it means.
the query report runs in store procedure then attach it in crystal report.
Actually , before i import to my user's Server, I test it in my local notebook first. It runs well. I also have tested it in my friend's notebook, it also runs well.
Does any one know how to solve it ?
Thanks in advance
Regards
KK

Fyi , The Windows is installed in 64 bit, and the sql server is installed in 32 bits. When i analyze in sql profile the parameter date in the crystal report is converted. But when i run it in my local machine(My notebook), the date parameter is not converted and runs well.
Is this the main problem , if the SQL server is installed in 32 bits ?
Thanks in advance
Regards
KK

Source and Program preview look good, AME renders linked aftereffects very poor

I have searched high and low but cant figure this out:
I have CS4 Master Suite installed on HPZ600 workstation Windows 7 Enterprise 64bit
Intel(R) Xeon(R) CPU X5550 @ 2.67GHz, 2661 Mhz, 4 Core(s), 4 Logical 6GB ram.
I created a 720p PremierPro (PP) sequence. I added a “Black Video” then rightClick- replaced it with an aftereffects (AE) comp. I added several screen captures to the AE file and animated a few graphics over the images. When I jump back into PP the source preview (linked Comp) looks great, the Program preview looks good and when I Export media the 1st preview (still in PP) looks good. Once it opens in Adobe Media Encoder the quality (mostly text on white background) looks terrible.
I have tried endless combinations of settings and options with no luck. I render out the AE file and it looks great. Import it into PP, looks great. Send it to AME, looks like poop. If I take the images (used in AE) and import them directly into PP I get a good export in AME but I need them in AF to animate.
If anyone has any info that might help I would be greatly appreciative.
Thanks

No, but that does seem to be a good indicator. When the preview (AME) is bad, the rendered video comes out bad. When it is good, the video comes out good. I just rendered this. The preview showed about 1 second of good quality and then the busted look (with linked AE only, video was good). This is a 1280 x 720 png in AE with no animation or effects.
The linked AE is video2 in PP on top of 720p video in video1. If I create a new sequence and place (copy/paste from the old one) the linked AE alone it previews and renders great. Once I add the video (AE fades in over the video) and have 2 720p elements, the AE will randomly look bad.
Do you think it could be a RAM issue?
Here is an example: This is a rendered WMV about 20 seconds in.
Here is the same WMV 21 seconds in. It is the same image in AE. This quality shift was also identical in the AME window.
thank you for your time and info, I appreciate it.

Newbie to BI Publisher..preview report giving error msg in word 2007..

Hi,
I am new to BI Report. I have installed BI Publisher standalone 10.3.4.1..Generated sample XML file...created report on Bi Publisher and now when I try to do preview it gives me an error message saying that I need to check the path of the file
'D:\Documents and Settings\swatee.jain\Local Settings\Application Data\Oracle\BIPublisher\TemplateBuilderforWord\tmp\441274806764750out.rtf'.
When I go to this location and click on the rtf file..I see my report...Am I missing some word setting....I am not able to generate any BI report...Any help would be appreciated...
Thanks
swatee

We found out what the problem is.
The report was using a wizard table, the table had 8 columns that actually went past the margins of the page. The built in renderer for PDF in the BI publisher desktop does not fail, but the report columns do "fall" off the page when you look close, just by a few characters on the last column but the line making the box around the table IS still printed making the last few characters missing difficult to notice.
The BI Publisher render simply throws the error above and fails.
We removed 2 columns, made sure the report stays in the margins of the report and all works well now.

I've logged onto iTunes, but it's asking me security questions because it's a new device, and I'm getting the answers wrong, but iTunes wants to reset but send the new passwords to my ex partners email address how can I get round this.

I've logged onto iTunes, but it's asking me security questions because it's a new device, and I'm getting the answers wrong, but iTunes wants to reset but send the new passwords to my ex partners email address how can I get round this.

I believe part of the recovery process is you get an e-mail allowing you to reset questions. If that e-mail isn't correct either because your son set it up then you really have no option but to ask Apple again. They are getting strict abotu security and given the number of "My iTunes account got hacked" posts here I can guess why. They have no way of knowing you really are the owner of the account. It's like me going to a policeman and saying, "See that car over there? That is mine, can you open the door for me?" and the police opening it on that basis alone.
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09&11/2012) - https://discussions.apple.com/message/19809294 and https://discussions.apple.com/message/20229239
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

I know stealing is wrong but what gives?

When I was making a halloween CD for work a lot of my music was "taken" from other sites on the net and I had a lot of wav files. I had no problem burning a CD from my Itunes with my purchased songs and my "taken" songs and wav files. In fact the CD turned out pretty good with about 38 songs 1/4 of them "taken". Don't remember what version of Itunes I was using. To make a long story short I am now using Itunes 7 and half of the songs I tried to burn for my Christmas CD didn't work because I guess they were "taken." Itunes 7 said they were not authorized to play them on the computer. I only got one song to play. I tried converting to ACC but no luck. Itunes7 won't even play the songs directly from the computer either. What has made the difference? Yes I know stealing is wrong but it worked the first time.

Hi, Wayne. Welcome to Apple Support Communities.
Is AppleWorks installed? It's what I use, and came on many iBook models.
TextEdit Is a rudimentary word processor, and is included with Mac OS X.

My iphone wont let me send imessages it keeps saying my password is wrong but ive reset it twice

my iphone wont let me send imessages it keeps saying my password is wrong but ive reset it twice

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

1 Thai Character printout wrongly but preview report good

Similar Messages

Maybe you are looking for