10.4.11 Netinstall issue with 10.5.2 Server.. .

G'day folks, I'm in the process at the moment in setting up a Leopard server and configuring Netinstall on 10.5. The two images made for Mac OS 10.5.2 are working fine. Whereas the 10.4.11 images created on 10.4 server, and copied onto 10.5. Under Server Admin, the images are coming up fine, and also comes up on the client machines too. However, the problem is, with the 10.4.11 image, as soon as I continue the restore/installation of the image, the progress bar goes for half a second, then stating that the Installation is complete. The process that I used to create the image is as follows:
- Firstly created an image on the Mac
- Then booted it into target disk mode
- Plugged it in via firewire into the 10.4 server
- Opened up Disk Utility, and then created the DMG of the Macintosh HD
- After creating the DMG, I make an nbi file in System Image Utility, and then copy the nbi onto the 10.5 server (usb drive).
Now the 10.5 images were created the same way, and come up with no problem. I'd be more than happy to give more information about the steps used.
Muchly appreciated folks

Actually the plot thickens with a message in the log on the 10.4.11 netinstall part (on a client workstation) after the installation is "complete"
dyld: Library not loaded: /usr/lib/libcurl.3.dylib
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
Reason: image not found

Similar Messages

HT6154 Is there an issue with the software update server? My iphone has been trying to update to the new iOS for almost two hours

Is there an issue with the software update server? My iphone has been trying to update to the new iOS for almost two hours

Hello brownie67,
Thanks for using Apple Support Communities.
If you're currently unable to update your iOS device Over The Air, then please update it using iTunes.
Update your iPhone, iPad, or iPod touch iOS software
Take care,
Alex H.

10.2.8 client login issues with 10.3.9 server

Hi we have just updated our computer lab to 10.2.8 client computers and a 10.3.9 server but I am having issues with the client computer loging into the server I am using LDAPv3 and when I try to have a user login to the server from the client at the login screen I get the login window shake.I can login fine from a 10.3.9 client computer.Any advice would be appreciated.Thanks in advance

Check your 10.2.8 machines Directory Access and make sure LdapV2 is not checked and also that Ldap V3 is checked and configured correctly. I found that if I had both Ldapv2 and v3 on my 10.2.8 clients could not log in. 10.3 clients only have the option for Ldap V3, so it is not an issue.

Issues with setting up Exchange Server 2013

Hi All
Not sure what im doing wrong yet i am having issues with exchange server 2013.
Currently I have got general SMTP Mail flow working. as long as i log onto the local servers OWA (https://10.x.x.x/owa) i can log into a users mailbox. i have tested sending and recieving mail using this and it works.
My main issue now is with accessing the OWA externally via our website. (owa.xx.xx.au/owa) or connecting ANY Outlook to the server.
When i connect to the exchange server via outlook it asks for the password again multiple times never authenticating it then time's out and says:
" the action cannot be completed. the connection to microsoft exchange is unavailable, outlook must be online or
connected to complete this action "
then when i click on OK it goes to the General Tab and under microsoft exchange server: the name for it appears as
[email protected]
with mailbox set as:
=SMTP:[email protected]
Currantly on our DNS i have
mx= 10 mail.xx.xx.au
CNAME= autodiscover = mail.xx.xx.au
CNAME= OWA = mail.xx.xx.au
A = mail = 12.34.56.78
On our modem/router i have set one-to-one nat to our firewall IP
On our firewall i have
SMTP SAT and NAT to Exchange server
HTTPS Sat and NAT to exchange Server
HTTP Sat and Nat to exchange Server
Port 587 SAT and Nat to exchange server
pop SAT and NAt to exchange server
Im willing to bet its something stupid i have overlooked but i was wondering if anyone would be able to help me out
Regards
Sibsy

Hello,
Firstly, please follow the Shadab's suggestion to check related virtual directory settings.
Please make sure you use certificate that's created by a CA that's trusted by the client computer's operating system.
Please use get-outlookanywhere | fl cmdlet to check ExternalClientAuthenticationMethod. By default, the authentication is Negotiate.
Cara Chen
TechNet Community Support

Issues with Mac OS X Server 10.4.8 and Windows File sharing

We are having lots of issues with our SMB share on Mac OS X Server 10.4.8. The main issues are the following:
- Group ACLs seem to not work properly, and I have had to add dozens of manual permissions on a per-user basis
- Often, users open a file in read-only mode, without any reason, and can't modify it
- Often, users open a file with full write access, but then cannot save it and have to use a "save as function".
After having looked all over the Internet and on the Apple's discussions forum, it seems like this issue has been around for quite some time now:
http://discussions.apple.com/search.jspa?forumID=702&threadID=&q=smbANDpermissions&objID=f702&dateRange=thisyear&userID=&numResults=15&rankBy=10001
http://discussions.apple.com/thread.jspa?messageID=1546867&#1546867
http://discussions.apple.com/thread.jspa?messageID=647251
And no real answer/solution has been provided by Apple yet.
I also looked on Samba related pages, and it seems like these issues were Samba related (both ACL/OpenLDAP and Microsoft Office file handling issues), and the current version of Samba (3.0.23c) seem to have solved lots of issues in these areas:
http://us1.samba.org/samba/history/samba-3.0.23c.html
Apple ships Samba 3.0.10 (16 Dec 2004) with 10.4.8, which makes the shipping version at list 15 versions (and 18 months) behind the current Samba release (30 Aug 2006).
People within the company are obviously quite unhappy with the situation and beyond me looking like a fool for migrating from Windows Server to OS X, I now need to find a solution to the issues.
I would like to know what is the official and Apple recommended way to solve this issue.
Kind regards,
Pejvan
It seems like Apple is totally ignoring the issues, users are facing with SMB shares, while their emphasize as a selling point how OS X Server is a great "windows file" server.

Hiya
Thanks for the reply.
>Is there a UPS involved?
I wish there had been. I might not be having to deal with it now! :-)
>If you boot from the Install Disc & use System Profiler there, does the Same RAM situation? Did you physically >check those slots? Thinking maybe the OS is kicking them out on bootup?
I've had the following suggested to me on another forum - "My guess on the RAM error is this. You have a processor that wants the RAM to be dual channeled and since it reads both A slot are populated it wants both B slots to be populated. Remove A2 and put it in B1"
But unless it is degrading performance I'll probably just leave it.
> Still can't get it to boot from the Clone holding the Option/alt key at bootup?
I can get it to boot from the Clone using the option key but it's a pretty random event. I can try for ages and then suddenly it'll work. Or it may work first time. It does seems to work more easily after a PRAM zap. The funny thing is that once it is booted up it will re-start in any way I want it to (the boot volume, the clone, a disk, single user mode etc). It is just hard to boot from a full shutdown.
I'm thinking that if I ca get the start-up issue fixed then I can fix the RAID issue at my leisure and even add the hard-drive that the clone is currently on to the RAID array.
Thanks again.

DW CS5 -- Issues with uploading files to server

Hi everyone -- I recently took over control of a website that hasn't been updated in years. I am in charge of redesigning the site, but need to keep what we have up-to-date until the new site is ready to roll out. I received the FTP info for the server and got site files into local folders so I can make changes. I've made changes to one file (index.html) and am trying to put that file back onto the server; but in the file transfer process, the dependent files do not get uploaded (I get a message saying "'fileName' - same - not transferred"). The one file that I have changed, and Dreamweaver says has been uploaded, is not updating on the web. I checked the file on both my local and remote view and both reflect the changes I have made -- just not the actual site on the web.
I'm sure that's a little confusing, so I'll try to summarize (with bulletts!):
I have correct FTP info to server
I downloaded site files from server to local folders
I edited index page, and put the file to the server
Dreamweaver indicates that the file has been successfully uploaded
Local view shows edits I have made
Remote view shows edits I have made
Other dependent files have not been uploaded ("'fileName' - same - not transferred" error message)
Actual website does not reflect changes made to index page
What am I doing wrong????
Thanks in advance for any help you can provide!

Filezilla is a free, open source FTP client. It's a standard desktop application. An FTP client connects to a server using the File Transfer Protocol and allows you to transfer files up to the server (upload) or download files from the server (download).
Why use a separate FTP client rather then the FTP functionality built-in to Dreamweaver? Because, in my experience, it works better the Dreamweaver's sometimes flakey FTP functionality and it's easier to troubleshoot FTP issues.
In Firefox, to clear the cache, go to Tools -> Advanced -> Click Network Tab -> Click "Clear Now" button. Hit F5 to refresh the page and see what changes (if caching was the issue). If nothing changes then for some reason your files are not being uploaded properly to the server. In that case I'd check to make sure you're loading your files to the correct directory on the server (usually a folder called "httdocs" or "www" - check with your hosting company to amke sure).
Hope this helps.

Tricky Issue with connecting to Lync server from my desktop lync client 2010

I am facing a tricky situation here,
Firstly i have 3 modes of connecting my laptop to the internet as follows:
1)Using Wi-Fi connection.
2)A physical LAN cable connection
3)An internet data card (A USB data card).
Now, i can comfortably use my Lync using 1st and 2nd mode of connectivity. But i am having a real issue using the 3rd mode of connectivity i.e using internet data card, it just doesn't connect to the Lync server at all, even though i can browse internet
very well.
Later i got a workaround to solve this, what i did was, i connect to internet first with 1st and 2nd modes i.e wifi or lan cable and then i also connect to internet using 3rd mode i.e data card.
After this i start my Lync, which now connects perfectly and then when it is connected and working.
I disconnect my WiFi or LAN cable this causes Lync to restart, but this time it connect within minutes again using internet of my datacard, isn't this Bizarre ??
Now Could someone please help me to connect the Lync just by using my internet datacard?
Atlast 2 thing which may be of help is :
1)I can easily connect Outlook to the exchange server using my datacard and retrieve my mails.
2)When i connect to internet using my internet datacard, I can still see "Not Connected Symbol" in my network indicator on my Win7 PC, But i can still Brows
internet.
This problem may have something to do with networking, not sure. Please Help me to solve this !!!
Ambrish

Infact it was a Network Issue, found following on technet and solved the issue:
I found a solution for (my version of) this problem. My tray icon never showed the red X, but if I clicked on the icon, the popup showed a bigger icon with a red X, and said "Not connected". As in your case, Internet worked, but I'm unable to setup
a VPN connection because it insists on using a non-existent modem, obviously because I'm "not connected" (which I am).
I monitored the processes running the NlaSvc and Netprofm services (using ProcMon), and noticed that both were denied read/write access to subkeys within the HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList hierarchy.
The processes were running as NetworkService and LocalService, respectively, so I tried adding full access for these service accounts to the entire subkey
mentioned above. Notice that permissions are not automatically inherited in the registry, so you may need to explicitly "replace all child object permissions with inheritable permissions from this object".
Within seconds, Network and Sharing Center tells me I'm connected to my domain. Yay!
A reboot was required to fix the tray icon and its popup.
However, I'm still unable to add my VPN connection.
I'm interested in hearing from you guys if your registries miss the same permissions? If so, Windows 7 must have a bug somewhere with misaligned service permissions/rights.
Ambrish

Issue with Setting Up Test Server for PHP/MySQL to work

I've got a few newbie issues
which I hope someone can help with!
I'm trying to get Security Assist to work, so I've put MYSQL and workbench on my computer to get it going. I haven't created a test server in PHP, because I'm wondering if it will affect my already running website ftp? Will it take down my company website if I create a test server with the same ftp as my website?
So, I created a model in workbench (table) and I've tried to connect mysql to dreamweaver. I keep getting an error when I try to connect!
Despite the error saying an error has occurred..I have something which looks like a plus (+) sitting in my database area on DW, but it says there's no tables there! And in mysql there is a table!
I'm a bit bloody lost to tell you the truth. Just changing the password on mysql to get going was horrendous.
Anybody have a solution to get me going, so that my tables are sitting nicely in my dW and can be connected to my SA (Security Assist).
Ugh!

The first question: on what platform? Windows - Mac?
I only succeeded in setting up a testing server on my Mac
with PHP and MySQL after reading a book of David Powers. On Leopard
I belief there still are problems connecting PHP to MySQL.

Issue with Snapshot in Windows Server 2008 R2

So I am new in the company and the sever was setup as a differential drive and which I think is not a good setup for production environment. So my issue is that snapshot of the server is getting bigger and bigger on daily basis and it is eating my free disk
space a lot. In past one week my free disk space reduced from 100 GB to 90 GB. I am new in server world and still learning. I have no idea how to tackle this situation. Can someone give me any idea to stop the snapshots from consuming my hard drive?

Hello,
please see similar thread
http://social.technet.microsoft.com/forums/windowsserver/en-US/4aac365a-74a1-47a4-8885-e46c60bd24af/vss-issue-eating-up-all-the-space-on-drives
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Issue with IISReset in MOSS server

Hello,
We have a Moss 2007 Server with Windows 2003 Server installed. When we do an IISReset on one of teh WFE server,
we get the below error in event log.
IIS Reset encountered an error while stopping services, which was requested by.The logged data is the status code. Since the force option is on, IIS Reset will now terminate the services' processes. This may cause SCM to report errors about the
services exiting.
Event ID:6
Any help will be much helpful for us.
Thanks,
Sridhar S

Hello,
Here is technet link for same issue: (see 3206 event in link)
http://technet.microsoft.com/en-us/library/cc735265%28v=ws.10%29.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Iphone SMTP Issues with Apple 10.6 server.

Hi!
I use multiple iphones and blackberries at my place of employment. On the iPhones, sometimes we get errors on sending email, the error saying "The recipient "......@...." was rejected by the server because it does not allow relaying".
I am wondering if this has something to do with the provider cell network. I say this because this is not a constant, dependable, consistent error. Additionally, I have multiple authentication methods set up on the server, and changing around the configuration (ie turn ssl off, change from md5 to password) etc will get the phone to work. Then you can change config back to what it was and it will work as well.
Right now I have 2 iphones, configured exactly the same for SMTP, 1 phone approx 1 mile away from where mine is. My phone works, the other does not. I am waiting for the user to bring his phone to me so I can do a side by side comparison.
BTW this is in Vermont and Edge is a Rampant disease here......(IE we are on edge more than 3G)

Allan,
I am not sure that I dont allow that, IE im not sure where to set that(this is for allowing an employee to use a personal account through the authenticated SMTP of the company server). I thought as long as the user was authenticating through SMTP, which IS required, then it would in fact allow you to send whether using a personal or company.
These security settings, for me, were set up out of the box, for the most part and have been pretty happy with the security level. I used common sense and logic when configuring my first Apple mail server, however I would have to go through it again and be more diligent about documenting in order to tell you what I set everything to. I had some help from Apple Support.
Anyway im not sure what the personal accounts settings are, we DO allow employees to set up their own accounts, as long as they provide the configuratiuon and can set up themselves.
This particular case seems to be more user created, not server side issue.
To re-iterate, no relaying here. I send emails to Comcast regularly abuse@ to tell them to stop allowing their business accounts in the US to blast out spam....

Issue with rmi connection when server name has underscore("_")

Hi
I am getting the following error when server name has underscore("_"). And jserver is not coming up. can anyone please help me with this
ERROR 02/11 17:19:42 jserver [main] 104021
java.net.MalformedURLException: invalid authority: rmi://TP_BMCPOC:1099/server
at java.rmi.Naming.intParseURL(Naming.java:313)
at java.rmi.Naming.parseURL(Naming.java:220)
at java.rmi.Naming.rebind(Naming.java:154)
Looks liek Naming.rebind has some issue. is there any other alternative to register??
Thanks
anitha

[http://en.wikipedia.org/wiki/Hostname#Restrictions_on_valid_host_names]

Mac G5 10.3.9 Samba Issue with Windows 2000 Advanced Server??

I have just installed a new Windows 2000 Advanced Server network but the Mac G5s running OS X 10.3.9 Panther cannot navigate the server - the finder just hangs with a beachball. The PCs can navigate without any problems.
Navigation is fine on the G4 running OS X 10.2.8 Jaguar on the same network.
On the G5 I have tried creating a new user and put the Mac using DHCP but this doesn't solve the problem.
I think I have tracked down the problem to Samba but am not sure - When I type in the direct samba link to the server:-
smb://10.10.0.5
The "SMB Mount" screen asks me which share I would like to mount. This works without a problem. I create a shortcut to the share. This also works until I reboot, then the problem reoccurs!
I think I need to reinstall Samba, or update the Samba software?
Does anyone have any thoughts,
John
G5 Mac OS X (10.3.9)

HELP FROM A GUY WHO IS NOT A SYS ADMIN OR ON AN I.T. STAFF!
And with that dislcaimer...
What sort of settings do you have checked in your Directory Access > Services panel? That is, do you have SMB turned on?
Also, I would make sure that your server and computer's clocks are showing the exact same times-- just in case there is a synchronization issue.
Our Macs have had similar, but not identical, problems in the past.

Strange issues with domain controller/DNS server

Our domain controller/DNS server was working fine this morning. Then suddenly we stopped being able to access certain things on it. I could ping it, RDP into it, and access some files on it, but I couldn't run any applications hosted on it, accessing shared
network files was slow, and different people around the office were getting access denied errors to files and folders they had full control of in NTFS (and in shared permissions).
At first I noticed an NTP error so I registered w32tm and started the service and that got rid of the error but didn't fix anything.
Oddly, machines still had internet access.
We tried rebooting everything, restarting services, nothing has helped.
When I accessed the server directly through the console I could access everything, could connect to any machine in the office, nothing seemed to be wrong with it.
Any ideas?

Is there any recent changes in your network or firewall or antivirus? Is there any change/updates performed in the AD side? I would suggest find out changes being done at the AD or Network/FIrewall level. You can run various diagnostic test within your AD
environment to find the overall health of the AD infra.
What does DCDIAG actually… do?
Active Directory Replication Status Tool Released
http://msmvps.com/blogs/ad/archive/2008/06/03/active-directory-health-checks-for-domain-controllers.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

PXE boot issue with DHCP and SCCM server on different subnets

I'm working with a client on the operating system deployment module of SCCM.
Their network configuration currently has a single large subnet for client
computers with a DHCP server on the same subnet. The SCCM subnet is
configured on a seperate subnet with no DHCP server on the subnet. We want to
configure client computers to be able to boot using the PXE client to deploy
OS images to the machines but can not get PXE-boot to work correctly.
Also, the client does not want to make changes to their network
infrastructure routers or switches to remedy this problem. Are there settings
on the DHCP or SCCM servers we can implement to make this work? If so, what
needs to be installed or configured on each server. We currently already have
WDS installed on the SCCM server and the SCCM server is configured as a PXE
Service Point within SCCM. Both WDS and the PXE Service Point seem to be working fine.
Any help would be appreciated.
Thanks,
Gary

I am Brazilian,
sorry for wrong english
My DHCP is on linux,
in my own structure VLANS
The system center is on the network
10.0.4.0/24
The machines on the network 10.0.5.0/24
The problem is that the machines that
are not on the same network system center
can not boot
I tried configuring / etc/dhcp3/dhcpd.conf
follows
option vendor-class-identifier "PXEClient";
option bootfile-name "\
\ SMSBOOT \ \ x86 \
\ wdsnbp.com";
option tftp-server-name
"10.0.4.101"; ---->
IP server
But it did not work, anyone know
how to configure?

10.4.11 Netinstall issue with 10.5.2 Server.. .

Similar Messages

Maybe you are looking for