10.4.8 Server Crashes/Locks up when client search it

OK.
Server was updated from 10.2.8 - 10.4.8
The machine is a Single G4 Slot Loading Xserve. We've added another 1 GB RAM (total is 2 GB) and removed both Hard Drives and installed larger ones (after market but matching as Apple stopped selling their drives to suite and we were told by Apple this was OK to do).
There are two main issues:
1. The first, and most pressing is the G4 Xserve crashes/Locks up with a black screen when clients try to search for files on it's shared folders. We ran a permissions repair yesterday and the technician did a search and it was fine. Then today the clients searched for a file, using command "F" and the Server has locked up again.
2. Second issue is, sometimes the clients won't automatically log into the Server when they start up. We've removed them and re-added the shares previously with no change. The other issue which we think is related is the Server randomly 'disconnects" with the message saying "unable to find server"
We are getting the following message in the log which I think is related. I've been unable to find any information about it. The log is:
Feb 20 12:45:02 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 12:45:02 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 12:49:29 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 12:49:30 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 13:30:09 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: root.
Feb 20 13:31:05 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 13:31:05 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 14:04:21 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: admin.
Feb 20 14:06:52 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 14:06:52 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 14:45:59 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: root.
Feb 20 15:27:00 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 15:27:00 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 16:06:04 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: root.
Feb 20 18:36:20 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 18:36:20 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 18:38:42 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 18:38:42 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 22:09:57 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 20 22:09:57 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 21 03:15:26 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 21 03:15:26 mail /usr/sbin/PasswordService: client response doesn't match what we generated
Feb 21 03:15:46 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: root.
Feb 21 03:15:56 mail DirectoryService[67]: Failed Authentication return is being delayed due to over five recent auth failures for username: root.
Help!!!

I've experienced the same problem. My users can chown by ssh'ing to AFP server of file in question but can't in Terminal perform chown on same file logged in to localhost by default.
This subverts ACLs' usefulness in at least the respect that allowing group members to change ownership of files served in accordance with AFP is rendered unduly complex. One might as well not try that setting--for most clients, anyway.
Moreover, my take is that this is no small matter. I've posted more here. http://discussions.apple.com/thread.jspa?threadID=831517
In this thread, though, can anyone comment on this or suggest how my users can invoke their ACL permission as members of a certain group to chown files on AFP shares in a local shell or--imagine this--in the "Get Info" interface?
PS In my search for a workaround, I posted under the topic "Command Line & Terminal":
http://discussions.apple.com/thread.jspa?threadID=830698&tstart=0
PPS Maybe this is an old problem. See this 2004 posting about "a bug lingering somewhere in the afp client code".
http://discussions.apple.com/thread.jspa?messageID=3855261&#3855261
PowerMac Mac OS X (10.4.8)

Similar Messages

InDesign server crashes every time when calling deleteEmptyPages in script

We are evaluting InDesign Server CS6 on a Windows server environment. We have an idml file, sample xml file that is tagged to specific frames inside the idml file and a script file for execution on the server. This script opens the idml file using the app.open api, imports the xml file and export the ID file to a PDF. Because we have table content with variable row count, we are using the smart text reflow functionality. Setting the text preferences with smart text reflow appears to be working but we also want to delete the empty second page when the content is less than a page. So, we also tried using the deleteEmptyPages property document's textPreferences. When this is set to true and the script is executed on the ID server using the sampleclient, the server crashes with the following message. When I do the same thing in the InDesign UI using the preferences options, it works as expected.
The script looks like below - is this the right way to do it?
var myInddFile = app.scriptArgs.get("idfile"); //"X:/IDFiles/AutoFlow.indd";
var myXmlFile = app.scriptArgs.get("xmlfile"); //"X:/IDFiles/deleteme.xml";
var myOutputOptions = "[Smallest File Size]";
var myPDFPreset = app.pdfExportPresets.itemByName(myOutputOptions);
var myDoc = app.open (File(myInddFile), OpenOptions.OPEN_COPY);
myDoc.xmlImportPreferences.ignoreWhitespace = true;
myDoc.textPreferences.smartTextReflow = true;
//myDoc.textPreferences.addPages = AddPageOptions.END_OF_STORY;
//myDoc.textPreferences.limitToMasterTextFrames = true;
myDoc.importXML (File(myXmlFile));
//uncommenting this line causes the ID server to crash
//myDoc.textPreferences.deleteEmptyPages = true;
var myOutputFile = app.scriptArgs.get("outputfile");//File("X:/IDFiles/sampleX.pdf")
myDoc.exportFile (ExportFormat.PDF_TYPE,myOutputFile, myPDFPreset)

Thanks Harbs. We are looking at full automation and so removing the pages manually is not an option. But I did find a script at InTools http://in-tools.com/article/scripts-blog/script-of-the-day-jan-24-2010/ that helps with automating the removal of empty pages. This script appears to be a nice workaround for server side usage. I used it on my document with multiple column text frames and it is removing the empty page as expected. If there is a better way to do this, let me know. Thanks.

YouTube app crashes on iOS7 when using search bar

My YouTube app will crash when I enter text into the search bar on the top right corner.
This is occurring on iPad Mini with iOS 7
Below is the stack trace.
Incident Identifier: E5FE8C98-E8BF-4AF4-881F-1B44C6552B7E
CrashReporter Key:   c1ef32f93069b5fade34ffa1841d1f5572e3df67
Hardware Model:      iPad2,5
Process:             YouTube [131]
Path:                /var/mobile/Applications/F4151C81-BB5A-4936-8DB0-F5BF0730B62B/YouTube.app/YouTu be
Identifier:          com.google.ios.youtube
Version:             1.1.0.4136 (1.1.0)
Code Type:           ARM (Native)
Parent Process:      launchd [1]
Date/Time:           2013-09-20 07:57:33.930 -0600
OS Version:          iOS 7.0 (11A465)
Report Version:      104
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Subtype: KERN_PROTECTION_FAILURE at 0x002e0074
Triggered by Thread: 0
Thread 0 Crashed:
0   libobjc.A.dylib               0x394c7942 0x394be000 + 39234
1   libobjc.A.dylib               0x394c976a 0x394be000 + 46954
2   libobjc.A.dylib               0x394c1fe6 0x394be000 + 16358
3   libobjc.A.dylib               0x394c1db6 0x394be000 + 15798
4   UIKit                         0x3151d0ae 0x31501000 + 114862
5   YouTube                       0x00131058 0xc5000 + 442456
6   UIKit                         0x3150c01e 0x31501000 + 45086
7   QuartzCore                    0x31195246 0x31189000 + 49734
8   QuartzCore                    0x31190a56 0x31189000 + 31318
9   QuartzCore                    0x311908e8 0x31189000 + 30952
10 QuartzCore                    0x311902fa 0x31189000 + 29434
11 QuartzCore                    0x3119010a 0x31189000 + 28938

Found my fix.   I thought the app had updated automatically after the iOS 7 update. It did not.   I just had to update the app after the OS update.

Open directory server crashing every 30 days / clients unable to connect to calendar, contacts server

Hello everyone,
I am running an up to date Mavericks Server which serves exclusively as a calendar and contacts server for about two dozens devices. The server is reachable via DynDNS, however, the public IP hardly ever changes (only once or twice a year maybe). Tried setting the OS X DNS Server to serve "all clients" and "some clients".
For about 6 months (i.e. also under Mountain Lion), I am having a very strange problem. Roughly every 20-30 days, clients will not be able to connect to the server, instead getting a "wrong password" dialog. Restarting the open directory server will help for the next 30 days.
I have tried repairing the database as detailed here, however, the issue persists.
Any help would be highly appreciated!
I would have tried setting up a clean server installation, migrating calendars/contacts manually and re-adding all users by hand, however, I am not aware of an easy way to do so. The terminal command for calendar backup is broken under mavericks (might work with this workaround) and re-adding users manually would apparently involve correcting user UUIDs afterwards in order to match the migrated calendar data. Do you know of a better approach?
Thanks a lot!
DPSG-Scout

Hi Linc,
This looks the most relevant to me:
opendirectory.log
2014-03-11 11:13:09.460675 CET - 333.2628758.2628759 - Client: Python, UID: 93, EUID: 93, GID: 93, EGID: 93
2014-03-11 11:13:09.460675 CET - 333.2628758.2628759, Node: /Local/Default, Module: PlistFile - predicates with 'AND' are not supported
2014-03-11 12:09:00.296514 CET - State information (some requests have been active for extended period):
          Sessions: {
              28 -- opendirectoryd:
                          Session ID: 7BFBA6FE-A968-4399-A129-E3A5945E2A81
                          Refs: singleton
                          Type: Default
                          Target: localhost
          Nodes: {
              43 -- authd:
                          Node ID: 6D0E236D-6DBD-4E8C-BC01-B3F50C2C2D8E
                          Nodename: /LDAPv3/127.0.0.1
                          Session ID: <Default>
                          Refs: 1
                          Internal Use: X
an many more similar ones…
Thanks for your effort!

IWeb FTP help after a server crash

I have been using IWeb to post changes to my web page. During one of these FTP sessions, the provider's server crashed. Now when I try to publish with IWeb, I get a message that the directory path can not be found. When I use CyberDuck to FTP to the same path, it works. My provider can find nothing wrong on their end. I am a novice so I have exhausted my skills on this. Any ideas?
Tnks,
carl

I take it that you have tried deleting the path in publishing options window, reentering and saving?

Unknown server error when accessing Search api via REST

When trying to access the SharePoint search service via REST, I always get an internal server error with no information about the cause of the problem.
My SharePoint app uses app-only permissions, and includes search permissions as follows:
<AppPermissionRequests AllowAppOnlyPolicy="true">
<AppPermissionRequest Scope="http://sharepoint/content/tenant" Right="Write" />
<AppPermissionRequest Scope="http://sharepoint/social/tenant" Right="Read" />
<AppPermissionRequest Scope="http://sharepoint/search" Right="QueryAsUserIgnoreAppPrincipal" />
</AppPermissionRequests>
I see the search permission listed when installing the app.
I know I'm getting a valid bearer token, because all of my other requests work fine. Here is the request I'm making that returns the error:
REQUEST:
$ curl -H "Authorization:Bearer abcABC...f1-iYrm-efhQ" https://<domain-my>.sharepoint.com/_api/search/query
where <domain-my> is the SharePoint site that I'm accessing. I've also tried this request with all combinations of headers, including Accept, Content-Type, odata, and even including the request digest. I've also tried adding query parameters, and using
POST with the query in the message body. However, this is always the response I receive:
RESPONSE:
<?xml version="1.0" encoding="utf-8"?><m:error xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"><m:code>-1, Microsoft.Office.Server.Search.REST.SearchServiceException</m:code><m:message
xml:lang="en-US">An unknown error occurred.</m:message></m:error>
If I log in to SharePoint I can make a get request to /_api/search/query and it returns a non-error response. What is causing the problem with my REST request? Is there any way to get more information from the server? This is SharePoint online, so I don't have
access to the server.
Thanks!

When using search you must have a user context, it cannot be used with an app only policy. This feature has been submitted to Office User Voice. You can vote for it here:
http://officespdev.uservoice.com/forums/224641-general/suggestions/6069886-make-it-possible-to-use-sharepoint-search-with-app
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Server crashes when doing DBCopy

We are trying to upgrade to GW2012. We have a new DL360G8 server running SUSE Release 11, kernal 3.0.93-0.5. All HP diagnostics on the computer and raid pass.
When we do dbcopy to move databases from our existing GW8 system, the server crashes saying there was a raid controller issue. No more details than that.
We've tried this on 2 new servers - same issue. Only crashes when using DBcopy - not when we copy large files using other methods.
HP and Novell have not been able to come up with any solutions.
Anyone have any ideas on this?

Originally Posted by dknutson
Bob - I was told the GUI was required for running Groupwise - is that not the case?
GUI is not needed. You need X and x/gdm installed because of some dependencies in the agents allowing them to expose a GUI if requested, so they need those bindings. But having gdm or X running is not needed at all once the system is installed.
And again, we saw a very similar issue. Either the scsi driver crashes - which disconnects you SWAP and the OS just seizes up - OR - it would cause so much I/O that the OS could not swap quick enough and you would never be able to operate the GUI to get in. We also saw an issue with the graphics adapters on these servers as well, with the GUI running we would see this behavior, without it, everything was fine.
On one initially problematic box, we have had, literally, no unplanned downtime for 3 years once we ditched the GUI.
Also, you can try to limit the number of threads dbcopy is using the -t parameter, e.g.
/opt/novell/groupwise/agents/bin/dbcopy -m -p -f -t 3 /source_path /destination_path
And I just thought of this, since you mention a server to server copy, If the source / destination is a CIFS or NCP mounted share, you can also run into another issue: oplocks. Disable oplocks on both ends, and on the linux box, if using CIFS:
echo 0 > /proc/fs/cifs/OplockEnabled
-- Bob

IPlanet Web Server crashes when uploading a file of size 15 MB

Hi
Setup is iPlanet Web Server 6.0 with iPlanet App Server 6.5. A servlet is used to upload files using multipart form data. The web server restarts itself when tried to upload a huge file (approx 15 MB). The error log says
Catastrophe (600) Web server crashed.
Any help is appreciated
Thanks in advance
Rajesh

yeah its working fine. Thank you very much..
But it would be better if we provide the chunklength rather than using a zero to upload the file fastly.

Forms server crashes on right mouse click when loaded on Suse Linux 11

Hi,
I have loaded SuSE Linux 11 Enterprise Desktop SP1 on a PC.(1 GB RAM
I have installed Oracle developer Suite 10.1.2.3 here, when I open the Forms server application here and right click then the Forms server crashes.
There were a number of bottle necks before I could get to position to actual get the Oracle developer Suite installed in the first place and when that was done, now the Forms Development Server crashes.
Having said that, the Forms runtime works well here but there are numerous instances where this runtime crashes unexpectedly with a FRM - 92101 error.
It would be great, to hear from anyone who has got this combination up and working ?
I believe, I am missing some library or something else?
Any help is much appreciated.
Thanks,
Pradeepa.

Suse 11 is not supported for use with 10.1.2.x Developer Suite or Application Server
(See "2.4.3 Linux Operating Environment")
http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html

Managed server crashes when trying to deploy an application

Hi,
I have a unix box and sometimes the managed server crashes when the application has faults or some bug. Why does this happen? Why does the server go down every time there is an error? Can it not be crash proof?
NOTE: I do not have node manager configured

You'll need to share the details from the logs or the crash (usually a core dump file of some kind). The information you have provided is not sufficient.
You might also get the latest JVM update for the platform you are using. Sometimes those updates resolve issues.
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
Contact support if you have any questions.

Dreamweaver CS6 - locks up when connecting to server - sftp

I am using Dreamweaver CS6 on Windows 7 64bit which is connected to a remote server using sftp. Most of the time connecting to the server has been fine but now Dreamweaver has started locking up when I use the Put command. According to the log the process times out but if this is the case surely the program would still be operational. However, when this occurs Dreamweaver is unusable and the task manager has to be used to force the program to close. When it happens regularly (as it is today) the program becomes unusable. The files I have been uploading when this occured today were between 5 and 20KB's.
Does anyone know how to fix this problem.

Hi,
Use Check-in/Check-out while transferring. This can be enabled as follows:
In the site settings dialog, go to advanced tab and check the checkbox "Enable check-in/check-out". Give a name and a user-id as well. Save the settings now and you can do a get/put or check-in/check-out and confirm does it works or not.
Thanks
Harshit

Sharing: When using Photo Mail and clicking on Next after checking recipients Photoshop 11 crashes (locks up). What can I do?

I'm having trouble sharing with photo mail in Elements 11. When I click Next after checking my recipients Elements 11 crashes (locks up). My email address shows up correctly and has been verified. Any suggestions?

Hi,
Are you running on a Windows system?
If so, use the windows explorer to navigate to one of the following files according to your system.
64bit system: "C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
32bit system: "C:\Program Files\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
Right click on that file and select Run as Administrator then try your email again.
You should only have to do this once.
Good luck
Brian

Datasocket 4.0 server crashes when launched on win95

HELP!
When launched from the "start" menu, the datasocket
server crashes:
"cwdss has performed an illegal operation ...
... contact program vendor"
"cwdss caused an invalid page fault at xxx:xxxxx"
Labview itself runs OK, upgrading from 6.0 to 6.0.2
did not help.
I've disabled virus protection.
I've tried the upgrade dated 10/31/2001 referred to
in a knowledge-base article
Thanks!
--- PC Info ---
Windows 95B
Pentium 120MHz, 48MB ram

Hi,
The problem could be that you don't have the TCP/IP protocol installed on your PC. Add the TCP/IP protocol by going into the network properties, click Add select protocol, click Add select Microsoft - TCP/IP protocol, Then click OK and probably reboot your PC. More information is in Knowledgebase 217AHFK3 "Datasocket server crashes during launch".
Good luck.

Server locking up when managed clients log out

Hello,
I have an Xserve running 10.4.8 Server, 2Ghz G5, 2GB ram, and all that fun stuff at a school. The kids are able to login fine, but when they try to logout, the server completely locks up (lights on the front are maxed out) and the client computers (all eMacs running 10.4) get the spinning beach ball for up to 15 minutes. It's happened three times in the past three days we've been in school and I can't find anything that seems wrong. I've checked the logs and it's not showing anything that seems to be an error.
I haven't been able to see what's happening when it locks up because it's hunning headless and remote desktop or any other server programs can't connect. I'm going to hook a monitor up to it to see if I can catch anything.
I was hoping that someone has seen a similar problem and might have some insight.
Thanks,
Jason

turns out there were a lot of hidden trash files that filled up the hard drive. Emptied those and we're ok now. Thanks for nothing other apple users!

Server Crashes while compiling JSP

          Hi,
          I have a jsp (in a web app which i have deployed on WLS 7.0)and when i invoke
          it, the server crashes and i get the below mentioned error, somewhere i read this
          is a bug in jdk. I am using the jdk shipped with WLS 7.0. Could someone urgently
          help me in this regard... I am sure that there is no problem with my jsp as sometimes
          its successfully compiled .. but most of the times i get this error/excpetion:
          An unexpected exception has been detected in native code outside the VM.
          Unexpected Signal : 11 occurred at PC=0xc13f1090
          Function name=ZIP_Lock
          Library=/opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libzip.sl
          Current Java thread:
          "ExecuteThread: '6' for queue: 'default'" daemon prio=7 tid=0x0036a670 nid=18
          lwp_id=4647 runnable [0x6c2f9000..0x6c2f9490]
               at java.util.zip.ZipFile.freeEntry(Native Method)
               at java.util.zip.ZipFile.getEntry(Unknown Source)
               at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java:182)
               at weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.java:102)
               at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:53)
               - locked <0x717f8900> (a java.util.Collections$SynchronizedList)
               at weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:53)
               - locked <0x71802ee0> (a java.util.Collections$SynchronizedList)
               at weblogic.utils.classloaders.MultiClassFinder.getClassSource(MultiClassFinder.java:45)
               at weblogic.utils.classloaders.ChangeAwareClassLoader.upToDate(ChangeAwareClassLoader.java:112)
               at weblogic.servlet.internal.ServletStubImpl.needToReload(ServletStubImpl.java:580)
               at weblogic.servlet.internal.ServletStubImpl.checkForReload(ServletStubImpl.java:600)
               - locked <0x7c56f360> (a weblogic.servlet.jsp.JspStub)
               at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:155)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:451)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:287)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5363)
               at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2466)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
          Dynamic libraries:
          /opt/bea/jdk131_02/bin/../bin/PA_RISC2.0/native_threads/java
               text:0x00001000-0x00006b2c data:0x00007000-0x00007344
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/server/libjvm.sl
               text:0xc3c00000-0xc43d3000 data:0x7f709000-0x7f7bf000
          /usr/lib/libpthread.1
               text:0xc0bb0000-0xc0bc5000 data:0x7f6ae000-0x7f6b1000
          /usr/lib/libm.2
               text:0xc0230000-0xc0256000 data:0x7f6b1000-0x7f6b7000
          /usr/lib/libcl.2
               text:0xc1080000-0xc112d000 data:0x7f6b8000-0x7f6fd000
          /usr/lib/libisamstub.1
               text:0xc003f000-0xc0040000 data:0x7f6b7000-0x7f6b8000
          /usr/lib/libCsup.2
               text:0xc0b10000-0xc0b2b000 data:0x7f6fd000-0x7f700000
          /usr/lib/librt.2
               text:0xc022c000-0xc0230000 data:0x7f700000-0x7f701000
          /usr/lib/libc.2
               text:0xc0100000-0xc022b000 data:0x7f7c0000-0x7f7d7000
          /usr/lib/libdld.2
               text:0xc0002000-0xc0004000 data:0x7f7bf000-0x7f7c0000
          /opt/bea/jdk131_02/jre/lib/PA_RISC2.0/native_threads/libhpi.sl
               text:0xc1310000-0xc1321000 data:0x7f6ad000-0x7f6ae000
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libverify.sl
               text:0xc11f0000-0xc1200000 data:0x7f69b000-0x7f69c000
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libjava.sl
               text:0xc13b0000-0xc13dc000 data:0x7f696000-0x7f69b000
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libzip.sl
               text:0xc13e0000-0xc13f3000 data:0x7f694000-0x7f696000
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libnet.sl
               text:0xc07c4000-0xc07cd000 data:0x7f406000-0x7f407000
          /usr/lib/libnss_dns.1
               text:0xc00bc000-0xc00c0000 data:0x7f403000-0x7f404000
          /opt/bea/jdk131_02/bin/../jre/lib/PA_RISC2.0/libioser12.sl
               text:0xc030c000-0xc0310000 data:0x7f402000-0x7f403000
          /usr/lib/libnss_nis.1
               text:0xc0004000-0xc000a000 data:0x7f401000-0x7f402000
          /usr/lib/libnsl.1
               text:0xc0040000-0xc00ba000 data:0x6a780000-0x6a844000
          /usr/lib/libxti.2
               text:0xc00c0000-0xc00d5000 data:0x7d2e8000-0x7d2ed000
          /usr/lib/libnss_files.1
               text:0xc0028000-0xc002f000 data:0x7f400000-0x7f401000
          /opt/bea/weblogic700/server/lib/hpux11/libmuxer.sl
               text:0xc03ad000-0xc03b0000 data:0x7d2e7000-0x7d2e8000
          Local Time = Tue Feb 11 16:37:44 2003
          Elapsed Time = 405
          # The exception above was detected in native code outside the VM
          # Java VM: Java HotSpot(TM) Server VM (1.3.1 1.3.1.02-JPSE_1.3.1.02_20011206 PA2.0
          mixed mode)
          thanks in advace
          Manoj


Your original post mentions issues with jsp:useBean and jsp:setProperty, now you're talking about tag libraries and directives. Can you be more specific about what you're trying to do? Are you having problems getting JDev to recognize a tag library or are you having problems with the tag library when running the app? What directive are you trying to use that causes the termination error?

10.4.8 Server Crashes/Locks up when client search it

Similar Messages

Maybe you are looking for