10.5.3: Dock of RD clients reverts to default everytime user log in.

After updating from 10.5.2 to 10.5.3 clients conectet to an OD Directory with remote home directories the dock of all users returns to default. The changes one makes in the dock will not be saved anymore.
We are running 10.5.2 server with newly updatet 10.5.3 clients wich connect to an NFS automount..
Does anyone have the same issuses?

I've been having a few different problems with managed prefs recently, but found that if I delete the com.apple.mcx.plist file from the user folder, delete the Managed Preferences folder from the Client Library folder, log in as a local admin with the option key held down (this can be turned on in the login section of WGM for managing computers) then you have the option to refresh Managed preferences.
Finally log in as the user holding down the option key to reselect the group (if the user is assigned to more than one)
Like I say I had a different problem but this may help

Similar Messages

Cases in which Domain Group Policy settings would be reverted to default settings on a Win7 client

Hi - I'm sure this info is out there somewhere, but I'm having a hard time finding it. Basically, I'm trying to identify the cases in which settings deployed via Domain Group Policy on 2008R2/Win7SP1 would get reverted back to "default settings"
on a Win7SP1 client that is still a member of the domain, and is in a proper OU, properly targeted, WMI filters should still evaluate true, etc...
For instance, it appears that if machine-level registry settings contained within a LocalGPO file on a client get corrupted (C:\Windows\System32\GroupPolicy\Machine\registry.pol), all of those settings, plus all machine level administrative template settings
defined in Domain Group Policy, get reverted to default settings (corresponds with Event ID 1096 in System Event Log where it references "LocalGPO"). I have not confirmed if this is the case for machine level settings defined outside of administrative
templates in Domain Group Policy, or for any user level settings though. (But I suspect not.)
When a workstation is unable to talk to a Domain Controller in order to identify applicable Domain Group Policy settings (for instance, this issue:
http://support.microsoft.com/kb/2421599/en-us), do administrative templates Domain Group Policy settings revert to defaults up until the next successful processing interval? I don't believe
so, but would like confirmation.
Are there any other cases in which Domain Group Policy settings for a client still joined to the Domain would be reverted to defaults?
And when a client is unjoined from the Domain, what Domain Group Policy settings would remain on the client? I understand that some Domain Group Policy settings outside of administrative templates are "tattooed" to the registry. Does
anyone know of a full list of these settings? I believe that most or all of the ones in Windows Settings\Security Settings are tattooed, and the only way to get these settings removed is to explicitly change them via registry edit or LocalGPO/Local Security
Policy, after unjoining the domain.
Any info/insight/links to other doc/etc would be much appreciated!

Hi Shaun,
>>If a client cannot talk to a domain controller at all, admin template settings still stay in-place on the client, correct?
As far as I know, it's not this case. If a client can't communicate with domain controllers, it means that the GPOs applied to the client are out of scope. As suggested by
the article I provided, for native policy, "when a Group Policy object (GPO) goes out of scope, the policy setting is removed allowing the original configuration value to be used."
>>What if a client looses network connectivity while reading Domain GPO?
Group policy will be get updated when computers start up and users log on. Besides, for workstations, group policy will get refreshed at background with by default an interval
of 90 minutes. As long as workstations can restore network connectivity, the group policy settings will get updated.
>>Are there any other failure cases like this where some or all Group Policy settings (admin template or other areas) would get reverted?
There are many reasons which can cause GP malfunction. However, Windows itself provides necessary tools for troubleshooting various issues. When GP malfunctions, we can check
Event Viewer, collect group policy result, or generate group policy log to troubleshoot.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Outlook 2013 custom view reverting to default at random times

I have a customer who uses very specific view columns, color coding, and ordering to go with some custom addins. Every couple of months, his default view settings saved under "userdefaultview" will revert to default for no apparent reason.
Windows updates are not causing this as there is no time correlation.
System restore has worked once in the past, but is not working right now.
User is on Outlook 2013 connected to Exchange 2010 through an onsite server. He only uses one onsite desktop, and remotes in with other devices due to the large amount of customization on his Outlook client.
Thank you.

since Outlook 2003, the view settings information is stored in the mailbox or PST file. it may be difficult to determine the root cause because this issue happens every couple of months. the cause may lie with the client side or the server side.
to work around it, try to back up the custom views to a pst file which we can use to restore the views if this issue occurs. see:
http://www.outlook-tips.net/how-to/copy-outlook-custom-views/
after the backup, we can also try starting outlook with outlook /cleanviews and wait to see if it will fix the issue.
Flynn

Bluetooth problems: prefs revert to defaults after reboot

Hi there,
I have a strange problem with Bluetooth and wireless input devices. I have set up Apple wireless keyboard and mouse, and also ticked "Show Bluetooth status in the menu bar" in Bluetooth preferences. However, after I reboot bluetooth icon disappears from the menu bar, and Magic Mouse prefs revert to defaults.
Apart from that, I am not able to tick "Allow Bluetooth devices wake up this computer" in Preferences – Bluetooth – Advanced.
What can it possibly be?
Before that I had the same issue with Dock (its icons would return to a certain state every time after reboot, no matter how I'd change or rearrange them before restarting). I managed to solve Dock issue by trashing Dock .plist files. I guess it may be the same with Bluetooth, but I don't know which .plist to trash this time (tried deleting com.apple.Bluetooth.plist, it doesn't work).

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

How to enable multiple users logging in to the same client machine?

Hi,
We have our home directories shared from the server (using AFP) and this allows our users to log in to any machine via the normal console login.
But if you try to remotely login to a machine with ssh, and another user is already logged in at the machine, then you get the error message:
Could not chdir to home directory /Network/Servers/machinename/Users/keith: No such file or directory
I can connect (via) ssh, only if no user is logged in at the console. If I connect with ssh when no users are logged in, and then a user logs in at the console, then this unmounts the home directory for the ssh user.
I have read about the mnthome command, and if I try running this (from my ssh login whilst there is a console login) then I get the error message:
Error: Mount failed with error 1 Operation not permitted
I'm assuming that multiple ssh logins must be allowed somehow? Can you only do this if you share your home directories with NFS (in this case, I understand that all home directories always appear mounted on each client)???
Any help appreciated,
Keith
Server and all clients running 10.4.3
iBook & PowerMac G5 Mac OS X (10.4.3)

Thanks for the info. I really thought that this would be a fixable problem. I also thought that it might work when two different users both logged in using ssh only (i.e. when there is no console login). But this also causes problems for the second ssh login.
What practical work-arounds have people tried? The respondent to your other post (linked to above) suggested that NFS sharing might work, only that ssh logins still don't mount the home directory. Is this the case?
Thanks for the speedy answer.
Keith

App-V 5 Client + Office 2013 (Administrator OK, user Not OK)

Dear MS,
I've installed App-V environment onto our Windows 2008 RDS farm with your tech documents successfully.
Then I test it with a simple sequenced app (Mozilla Firefox and XML notepad) and it ran successfully.
I've also sequenced Office 2013 with ODT (Office Deployment Tool), no errors at the end.
But now the problems starts: when I log in as a normal user, then Office 2013 will show in Start menu, but disappears after a short time.
Logging in as Administrator doesn't have the issue, Office 2013 works perfectly.
The MS Office 2013 has been sequenced onto Win 2008 and 2012.
(yes, I know the 2012 sequencer is not ok for 2008 RDS, but the Firefox and Notepad were sequenced on Win 2012 and ran perfectly on Win 2008).
I did'n found related information on the technet forums.
What could it be? Kind of permissions on VFS? Where can I fix it? Or is the issue related to the sequencer?
ps. also tried installing MS hot fix 4 (and 5) for App-V 5 client, but the issues keep coming back.

What messages are in the App-V log in event viewer that might be applicable?
The message beneath viewed when an user log in. As an administrator, the event doesn't show up
Part or all packages publish failed.
published: 2 (Firevox and XML notepad)
failed: 1 (Office 2013)
Please check the error events of 'Configure/Publish Package' before this message for the details of the failure.
EventID 19104
Are you redirecting the Start Menu to the network?
Nope, the start menu shows only default applications when the user logs in.
The App-V Folder in Start Menu from Firefox and XML notepad are visible, but the office folder doesn't come up.
As an administrator, both Firefox, XML notepad AND Office folders are visible.
-but-
When I use Start Menu folder redirection, no one App-V application is visible (Event shows that Applications are loaded), how can I fix it here?
What are you using to manage user profiles?
I use AD User and Computer configuration to manage profiles
Does the application run if you browse to the EXE in Windows Explorer?
What does this to do with app-v? Because when you sequence the app, then is it no more EXE.
But, these EXE runs flawless in Windows Explorer (so there is no problem with the OS and the application).
Please help?

In August installed PE12 on Windows Vista with incorrect Sharing Preference for Email Client. Shows default Adobe Email Service How do I change it to Windows Mail?

Had PE6 previously to installing PE12 on Windows Vista. PE 12 installation went OK except for the Sharing Preference for the Email Client. Existing PE12 client is the default Adobe email service not the correct Windows Mail for Vista. How do I make this change..

Hi,
I think that for PSE 12, you may need to switch to Windows Live Mail
http://www.microsoft.com/en-gb/download/details.aspx?id=29224
You may find that you then also need the following fix.
Freeze or error “There is no email program” | Share via email | Elements Organizer | Windows 7
I think that the problem is that the new versions of PSE do not know where to look for the mail client.
Brian

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Call park music on hold reverts to default after server reboot

Hello,
We are noticing that if you define Music on hold for the Park service, the call park music on hold reverts to default sound after server reboot. (all systems we've tested do this)
Anyone using park music on hold that can verify one way or the other?
Thanks,
+Say thanks and observe basic forum courtesy:
+If this post answered your question, Mark As Answer
+If this post was helpful, Vote as Helpful
windowspbx blog: my thots/howtos
see/submit Lync suggestions here: simple and public

We have tested it and we have the same result. Hope the next update will resolve this problem.

Android 2.2 Reverts to Default email settings when roaming - Droid Incredible

When traveling with my Droid Incredible and want to send an email the phone often will lose my SMTP settings. At the same time it reverts to default settings for send / receive which means it will delete messages from POP server! Is there a roaming setting somewhere on this?
PF

In order to better troubleshoot, we need additional information. Can you please advise what E-mail provider you are using? Can you advise where and when this has happened most recently? If the issue persists, please contact us while you are in the area affected, as we would need to determine what network you are accessing at the time, along with additional information. You can feel free to call us from a secondary phone at 800/922-0204 or DM me with a secondary contact number (other than your wireless device) so that we can conduct additional troubleshooting.
Thanks,

VPN Clients getting different default gateways

Hello,
We have a new Cisco ASA 5520 and are trying to setup the VPN with split tunneling. We mostly have clients running XP and the problem is that some of the clients connect (using Cisco Anyconnect 2.5) and the split tunneling works as expected --these clients keep their default gateway-- and then some clients connect and get a default gateway of 192.168.119.1 (our VPN addresses subnet) and of course these users cannot connect to the internet while connected to the VPN.
Here is our config:
ASA Version 9.1(1)
hostname xxxxxx
names
name 178.239.80.0 Deny178.239.80.0 description 178.239.80.0
name 74.82.64.0 Deny74.82.64.0 description 74.82.64.0
name 173.247.32.0 Deny173.247.32.0 description 173.247.32.0
name 193.109.81.0 Deny193.109.81.0 description 193.109.81.0
name 204.187.87.0 Deny204.187.87.0 description 204.187.87.0
name 206.51.26.0 Deny206.51.26.0 description 206.51.26.0
name 206.53.144.0 Deny206.53.144.0 description 206.53.144.0
name 67.223.64.0 Deny67.223.64.0 description 67.223.64.0
name 93.186.16.0 Deny93.186.16.0 description 93.186.16.0
name 216.9.240.0 Deny216.9.240.0 description 216.9.240.0
name 68.171.224.0 Deny68.171.224.0 description 68.171.224.0
ip local pool PAIUSERS 192.168.119.10-192.168.119.100 mask 255.255.255.0
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 63.86.112.194 255.255.255.192
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.168.129.5 255.255.255.192
interface GigabitEthernet0/2
nameif dmz
security-level 10
ip address 192.168.20.10 255.255.255.0
interface GigabitEthernet0/3
nameif vpn_dmz
security-level 25
ip address 192.168.30.10 255.255.255.0
interface Management0/0
management-only
shutdown
nameif management
security-level 100
ip address 192.168.102.4 255.255.255.0
object network obj-192.168.119.0
subnet 192.168.119.0 255.255.255.0
access-list outside_access_in extended permit ip host 192.168.119.11 host 192.168.35.23
access-list outside_access_in extended permit object-group TCPUDP any4 object-group DM_INLINE_NETWORK_3 object-group UDP_TCP_Domain inactive
access-list outside_access_in extended permit udp any4 object obj-192.168.30.11 eq isakmp
access-list outside_access_in extended permit ip any4 object obj-192.168.30.11
access-list outside_access_in extended permit udp any4 object obj-192.168.30.11 object-group UDP10000
access-list outside_access_in extended permit udp any4 object-group DM_INLINE_NETWORK_7 eq domain inactive
access-list outside_access_in extended permit tcp any4 object-group DM_INLINE_NETWORK_8 eq domain inactive
access-list outside_access_in extended permit tcp host 216.81.43.190 host 192.168.35.30 eq ssh inactive
access-list outside_access_in extended permit tcp host 216.81.43.190 object obj-192.168.35.30 object-group DM_INLINE_TCP_6 inactive
access-list outside_access_in extended permit tcp any4 object-group DM_INLINE_NETWORK_9 eq www inactive
access-list outside_access_in extended permit tcp any4 object obj-192.168.30.11 eq www
access-list outside_access_in extended permit esp any4 object obj-192.168.30.11
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.41 eq www
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.41 eq https
access-list outside_access_in extended permit tcp any4 host 192.168.35.34 eq https
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.30 object-group Ports_UDpTCP
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.30 object-group DM_INLINE_TCP_7
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.30 eq ftp
access-list outside_access_in extended permit object-group TCPUDP any4 host 63.86.112.248
access-list outside_access_in extended permit udp any4 host 162.95.80.115 eq isakmp
access-list outside_access_in extended permit tcp any4 host 162.95.80.115 object-group Ports_115
access-list outside_access_in extended permit udp any4 host 162.95.80.115 object-group Ports_2746_259
access-list outside_access_in extended permit object-group TCPUDP any4 host 63.86.112.245 object-group Service_Group_245 inactive
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.40 object-group UDP_TCP_Domain
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.40 object-group DM_INLINE_TCP_2
access-list outside_access_in extended permit tcp any4 object obj-192.168.129.11 object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.129.11 object-group UDP_TCP_Domain
access-list outside_access_in extended permit tcp any4 object obj-192.168.129.11 object-group Network_Service_2703_6277
access-list outside_access_in extended permit udp any4 object obj-192.168.129.11 object-group UDP_443
access-list outside_access_in extended permit ip any4 host 192.168.101.75 inactive
access-list outside_access_in extended permit tcp any4 host 64.78.239.50 eq www
access-list outside_access_in extended permit tcp any4 host 64.78.239.54 object-group TCP_4445
access-list outside_access_in extended permit icmp any4 any4
access-list outside_access_in extended permit udp any4 object obj-192.168.35.40 object-group UDP_443
access-list outside_access_in extended permit tcp any4 host 63.86.112.204 object-group DM_INLINE_TCP_5
access-list outside_access_in extended permit tcp any4 host 63.86.112.204
access-list outside_access_in extended permit udp any4 host 63.86.112.204
access-list outside_access_in extended permit object-group TCPUDP any4 host 192.168.102.12 object-group Network_Server_1194
access-list outside_access_in extended permit tcp any4 host 192.168.102.12 eq www
access-list outside_access_in extended permit tcp any4 host 192.168.102.12 eq https
access-list outside_access_in extended permit object-group TCPUDP any4 object obj-192.168.35.41 object-group Network_Server_1194
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.12 eq www
access-list outside_access_in extended permit tcp any4 object obj-192.168.35.12 object-group DM_INLINE_TCP_3
access-list outside_access_in extended permit tcp any4 host 63.86.112.193 object-group Network_Service_TCP_1194
access-list outside_access_in extended deny tcp object Deny206.51.26.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny193.109.81.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny204.187.87.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny206.53.144.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny216.9.240.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny67.223.64.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny93.186.16.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny68.171.224.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny74.82.64.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny178.239.80.0 object obj-192.168.35.40 eq https
access-list outside_access_in extended deny tcp object Deny173.247.32.0 object obj-192.168.35.40 eq https
access-list vpn_dmz_access_in extended permit ip host 192.168.35.23 192.168.119.0 255.255.255.0
access-list vpn_dmz_access_in extended permit gre host 192.168.30.11 any4
access-list vpn_dmz_access_in extended permit tcp any4 host 23.0.214.60 eq https
access-list vpn_dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_28 any4
access-list vpn_dmz_access_in extended permit tcp any4 object obj-192.168.35.105 object-group DM_INLINE_TCP_4
access-list vpn_dmz_access_in extended permit esp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit tcp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit icmp any4 object obj-192.168.35.105
access-list vpn_dmz_access_in extended permit tcp any4 host 192.168.129.11
access-list vpn_dmz_access_in remark RDP
access-list vpn_dmz_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq 3389
access-list vpn_dmz_access_in extended permit icmp any4 object obj-192.168.35.23
access-list inside_nat0_outbound extended permit ip any4 192.168.119.0 255.255.255.0
access-list ftp-timeout extended permit tcp host 216.81.43.190 host 63.86.112.248
access-list ftp-timeout extended permit tcp host 63.86.112.248 host 216.81.43.190
access-list ftp-timeout extended permit tcp host 192.168.35.30 host 216.81.43.190
access-list ftp-timeout extended permit tcp host 216.81.43.190 host 192.168.35.30
access-list Split_Tunnel_List remark northwoods
access-list Split_Tunnel_List standard permit host 192.168.35.23
access-list Split_Tunnel_List remark paits2
access-list Split_Tunnel_List standard permit host 192.168.35.198
access-list Split_Tunnel_List standard deny 192.168.102.0 255.255.255.0
access-list AnyConnect_Client_Local_Print extended deny ip any4 any4
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns
access-list IS_Split_Tunnel standard permit 192.168.102.0 255.255.255.0
access-list IS_Split_Tunnel standard permit 192.168.82.0 255.255.255.0
access-list IS_Split_Tunnel standard permit 192.168.35.0 255.255.255.0
nat (inside,outside) source static object-192.168.35.0 object-192.168.35.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-192.168.82.0 obj-192.168.82.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-192.168.102.0 obj-192.168.102.0 destination static obj-192.168.119.0 obj-192.168.119.0 no-proxy-arp route-lookup
webvpn
enable outside
enable inside
enable dmz
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
anyconnect profiles pairemoteuser disk0:/pairemoteuser.xml
anyconnect enable
tunnel-group-list enable
group-policy PAIGroup internal
group-policy PAIGroup attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value PAI
group-policy PAIUSERS internal
group-policy PAIUSERS attributes
wins-server value 192.168.35.57
dns-server value 192.168.35.57
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain none
webvpn
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect profiles value pairemoteuser type user
group-policy PAIIS internal
group-policy PAIIS attributes
wins-server value 192.168.35.57
dns-server value 192.168.35.57
vpn-tunnel-protocol ikev2 ssl-client ssl-clientless
split-tunnel-policy tunnelspecified
split-tunnel-network-list value IS_Split_Tunnel
default-domain none
webvpn
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect profiles value pairemoteuser type user
group-policy DfltGrpPolicy attributes
banner value Welcome to PAI
wins-server value 192.168.35.57
dns-server value 192.168.35.57
address-pools value PAIUSERS
webvpn
anyconnect firewall-rule client-interface public none
anyconnect firewall-rule client-interface private value vpn_dmz_access_in
anyconnect ask enable default anyconnect timeout 5
group-policy Anyconnect internal
: end

Check is the users fall into DfltGrpPolicy because it has no split tunneling active.
Michael
Please rate all helpful posts

Does a managed client computer require an OD user account?

Currently, my site is set up so that users have local accounts on their own machines.
If I want to be able to manage settings on their local machines, do I need to convert all the existing accounts to server based OD accounts?
Ideally, I would like to keep them logging in locally, but be able to manage certain settings centrally, and then slowly migrate the local accounts to mobile accounts in the future...
Is this possible to do, or do I need to have all my users in my OD before I can manage their computers?
Thanks in advance

Hi
+"If I want to be able to manage settings on their local machines, do I need to convert all the existing accounts to server based OD accounts?"+
No.
+"Is this possible to do?"+
Yes. You don't necessarily have to have an OD Master to achieve this either, although it's easier if it is. Make sure your server is an OD Master and join client workstations to the LDAP node. If you don't need to disable 'Automatic logins' on the client workstations then leave it as a 'transparent' login. Users logging won't be aware of any other login option that way. However if you want to present a login window you can either configure it locally to not show any Users or apply that option as a managed preference. It's one of the many MCX you can apply at Computer level that you can't apply at any other level.
Bear in mind MCX at hardware level applies to all users - local or otherwise.
+"do I need to have all my users in my OD before I can manage their computers?"+
No. Although you will have to at some point if you want to achieve local to mobile accounts.
Tony

Adding a "revert to defaults" button

jpdk 1,3
I'd like to add a "revert to defaults" button
on my customize page. When I use PortletRendererUtil.renderCustomizeFormHeader(pr, out, null, "action", null, null) Only the 'apply' and 'ok' buttons are rendered. Do I have to do it manually or is there a utility I can use to do this?
thanks,
-sancho

You are right - the PDK article "Guidelines for Portlets in Edit Mode" describes such a button, which currently the JPDK doesn't support. Looking at some of the default portlets on a Portal home page, it would seem that the convention is now for this button to be called "Reset to Defaults". I have logged bug 1771249 against the JPDK and bug 1771238 against the articles to sort out these issues.

Indesign CS6 printer settings reverting to default

Hi
We have a problem which has started recently for some students when printing from Indesign CS6. Most of them have print presets which they created months ago for printing to the default printer using secure print, A3, heavyweight paper, bypass tray etc. They were working fine, but now, when they print a document using that preset it just prints on standard paper and normal (not secure) print.
I checked their print presets and in the setup for the printer within the print preset the settings have changed to the default settings. If I delete the preset and create another one any changes I make in the setup / preferences for that printer revert back as soon as I click 'Ok'. A work around I have found is that when I click 'setup' if I click on any other printer, then click back to the correct (default) printer, then click preferences and make the changes they stick and do not change back to the default settings.
This issue happens without using print presets as well, If you choose file / print and then setup, and you do not click on any other printer and then back again to the correct printer before clicking 'preferences' any changes you make will revert to default as soon as you click 'Ok'
It only seems to be affecting Indesign.
The printer is a Xerox Docucenter C6680, using the PCL 6 driver on a print server. We are also running Papercut.
Does anyone have any ideas what could be causing this? I have tried trashing the Indesign prefs but this does not seem to help
Cheers
Murray

THere appears to be a Postscript diver for this printer. Have you tried that?

10.5.3: Dock of RD clients reverts to default everytime user log in.

Similar Messages

Maybe you are looking for