10000 Line Items to be uploaded in Single Sales Order

Hi
Need to upload more than 10000 Line items in the Single Sales Order. What could be the best way of uploading it. is LSMW helpful?
Response awaited. thanks
Moni

Can u advise the steps involved in LSMW?
I believe it is not necessary to go for VA01.
we can go for VA02 itself, as the Header data is going to be one and same. If we create a Sales Order with Header data alone and then using VA02 with that particular Sales Order number in LSMW...
but will the total line items can be taken by Sales Order item level.
this is what the clarification needed.
To be very clear:
Let us say, 10 Sales Orders each with 1000 Line Items. What could be the possibility??
is there any solution for uploading like this? As i informed before, in LSMW for VA02 transcation, takes only the first 7 Line items in Sales Order from the Flat File with more the 1000 line items. That is, it takes only upto the line items which we can see in the VA02 screen and i feel the scroll down functionality is not working to upload above 7 line items. Something has to be done on this.
Any pointer on this.
rgds,

Similar Messages

  • Multiple deliveries from a single sales order

    Hi all,
    Can any body explain how to Configure the process to create multiple deliveries for one sales order and one invoice for these multiple deliveries.
    Thanks and regards,
    Dinesh Kumar

    Hi,
    In customer master in shipping screen of sales area data we have a field for partial deliveries. SAP allows 9 maximum deliveries for a single sales order. The partial deliveries should be allowed otherwise the system will not allow you to create multiple deliveries for the same order.
    Create a sales order in VA01, save it. Go to VL01N and as per your requirement change the delivery qty. For example the order qty is 50. For the first time when i go to VL01N, in the delivery qty field i will change it from 50 to say 10, accordingly i will pick 10 pc only and I will do PGI. The next time i go to VL01N the system will show me 40 in delivery qty field. I will change it from 40 to 10 and do the picking & PGI. Similarly i do the same thing 3 more times. Now my sales order qty is 50 and i have 5 deliveries for this sales order.
    <b>Creating single invoice:</b>
    Go to VF01 and enter all the 5 different delivery numbers there and press  enter. Click on execute or press "F8" the system will take you to a screen where it will show you 5 line items of the same material with 10 quantities each. Save the invoice. Thus you created a single invoice for multiple deliveries of a single sales order.
    <b>Invoice split:</b>
    Suppose when the delivery of the items is being done for different shipping addresses then the SH is different. Now the invoice will split - means after you enter the 5 delivery numbers and press "F8" the system will show you a button for "Split Analysis" If you click on this the system will show you the criteria because of which the split is taking place. The followig are important for invoice split:
    1. Ship to party,
    2. Incoterms,
    3. Billing date,
    4. Reference number
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Multiple pricing procedure in single sales order

    Hi Gurrus,
    i have come across in a scenarion where i need to have multiple pricing procedures in a single sales order.
    Does SAP support this functionality ?
    actually i am using a free goods, so for the trade item i want it to be charged at "SALES GL-Code" and for free good item i want it be be charge at "BONUS GL-Code".
    can anyone help me out that how can i handle this situation.

    Dear Shadab Ali      ,
    We can have only one pricing procedure .
    But the pricing procedure determined in the sales order can be changed to a different pricing procedure in billing (assigning pricing procedure to billing type)
    In your scenario, it is better you use 2 document type (one for trade and one for free )
    This way you can trigger two pricing procedure based on the scenario.
    Thanks & Regards,
    Hegal K Charles

  • Multiple Pricing Procedure in a single sales order

    i have come across in a scenarion where i need to have multiple pricing procedures in a single sales order.
    Does SAP support this functionality ?
    actually i am using a free goods, so for the trade item i want it to be charged at "SALES GL-Code" and for free good item i want it be be charge at "BONUS GL-Code".
    can anyone help me out that how can i handle this situation.

    Hi,
    Do not repeat the same question in different forums..
    to answer your question:
    No, not possible to have multilple pricing procedures to a single document.
    For your scenario, the trade item will be charged as lets say PR00, and this will have an account key mapped to GL1
    and for the free item, use the discount ctype R100 and map it to another GL--bonus GL and this should help you with your scenario.
    Regards,
    Raghu.

  • Block creation of multiple prod. order against single sales order in CO08

    Hi All,
    We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
    How to achieve this?
    SmanS

    Hi,
    you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
    Pls revert if you need any further information.

  • How to create item wise invoice with reference to sales order.

    Hi ,
    Please let me know how to create item wise invoice with reference to sales order.
    Ex : Sales order has 2 line items .
              When creating invoice system should create two invoices for each line items.
    I have tried with copy control but I am not able to do it.
    Please advise.
    Regards

    Hi,
    Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
    As per my understanding it should not be fixed and in that case it should like as follows,
    In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
    and select desire line item to be billed and click on copy and will take you to billing screen.
    Regards,
    Ajit K Singh

  • Item  Type and Service Type in Sales Order

    Hi All,
    How do i enter Item Type and Service Type in single sales order..?
    Any suggestion please...

    Hi
    If you select the Item type you have choose the list of Items else  it is service type you can give service description and choose belongs to G/L Acc.
    Or You can create a service as a Item with Item group as Service.
    Hope it helps you.
    By
    Kalai

  • Restriction of number of POs for a single Sales Order

    Hi,
    Currently, For a Single Sales Order multiple Purchase Orders are being created. Now, the Client wants to restrict number of Purchase Orders for a Single Sales Order that means, he wants only 1 Purchase Order for 1 Sales Order. Could you guys suggest how can I do this..? Is there any configuration for this ? Please suggest.
    A quick reply would be very helpful.
    Thanks in advance.

    Hi Pavan,
    In VA01 once you enter into the document and give the sold to party name below that you can see PO No there give only one PO no and and PO date based on the requested quantity the sale order will be created subsequent delivery and billing will happen.
    Regards
    Ram

  • Creation of Multiple billing documents from a Single sales order

    Hi Experts,
    How can we create many billing documents from a Single sales order.
    Will it be possible we create a Sales order with bigger quantity and then keep on creating partial billing documents based on the billing quantities and dates.
    Request you all for a solution.
    Thanks
    Montee

    Hi ,
    1. If Qty is one number - based on value of the order - it is possible to create different billing doc.'s based on billing date and value using billing plan , again these are periodic billing or milestone billing
    2. Using Contract process- create material /qty contract- release partial qty  by creating release document and create billing document w.r.t to contract or release document (sales order)
    thanks
    Chidambaram

  • Single sales order to different ship to party

    Dear sd gurus very good mng
                         How to deliver single sales order to different ship to
    partys?
    thans in advance
    venu gopal reddy

    Hi Venu
    You have to create separate account group for Ship to Party customer XYZ
    Do the partner function determination & assign  SH for Ship to party customer
    Raise the sales order in VA01 & enter the Sold to Party Ex-  ABC & Ship to Party- XYZ
    Delivery will be done for the XYZ customer
    And also please check this below link it might be helpful for your issue
    http://forums.sdn.sap.com/thread.jspa?threadID=2081804
    Let me know if your problem is solved
    Regards
    Pradeep

  • How to upload a CRM sales order to R/3 after modifying some values in CRM

    Hi All
    How to upload a CRM sales order to R/3 after modifying  some values in CRM ?
    In other words
      You have a Sales Order in CRM. While sending this Sales Order to R/3, we would like to modify certain values in the Order before it is replicated to R/3 . How do u do that?
    Thanks
    Jaman
    Message was edited by: Sap_Crm_Guy
    Message was edited by: Sap_Crm_Guy

    Hi Jaman,
    Try to have a look at the function group CRM_ORDER_API. In there you will find several useful functions. CRM_MAINTAIN_ORDER can most probably do what you want to do, but it is not simple to figure out how to use it as it is not very well documented.
    There is a BADI called ORDER_SAVE with three methods that you can implement. This BADI allows you to manipulate the order before it is saved and before it is replicated to R/3.
    Very best regards,
    Anders Mørk

  • Different Tax base in pricing procedure for a single sales order for different line item material.

    Hi,
    I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
    Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to)  is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
    Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
    Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
    Kindly suggest a suitable way to handle this scenario.
    Regards,
    Aashika Agarwal

    Hi,
    Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
    If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
    SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
    Hope this helps.
    Regards,
    Palani

  • Internal orders - Plan Line items are not uploading into SAP!!

    Hi Experts,
    Am uploading the budget values as plan line items of Internal orders(AUFK table) from my Z prog. by using BAPI_COSTACTPLN_POSTPRIMCOST.......in Return table(bapiret2), am not getting any error messages........so, am taking it for granted that, upload is successful.
    But, when I went to KOBP transaction.........I did not see any values for the internal order in question.......but, just now, I uploaded successfullly!!
    Let me know that, Why its happening like that? How to fix it?
    replies appreciated, thanq.

    I've lil doubt if this BAPI really update the internal orders in KOBP transaction.
    However just refer:
    bapi_costactpln_postprimcost
    Use BAPI_COSTACTPLN_POSTPRIMCOST
    And refer relevant OSS which is mentioned in Above threads.

  • How to create multiple WIP jobs from a single Sales Order Line

    Hi all,
    I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
    I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
    Thanks in advance!
    Regards!

    Assuming simplest of scenarios....
    In case of changes to Sales order qty, an unplanned order will simply disappear.
    If a wip job has already been created, you will get a cancel message (in case the job is not needed) or a reschedule out message (if the quantity needs to be reduced).
    ASCP will give you a reschedule in /out message if the dates change.
    Sandeep Gandhi

  • Items are not getting displayed in Sales Order Lines 'Ordered Item' field

    Hi All,
    Ordered Item field in Sales Order lines is not getting values When trying to create a Manual Sales Order.
    When clicked on Ordered Item LOV, no values are getting displayed.
    Thanks,
    Chandra.

    879035 wrote:
    Hi,
    I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
    The Sales Order header information i was able to enter & generate the Order Number.
    R12.1.3 is the version i am using.
    Thanks,
    Chandra.Have you done all the required setup in OM??
    Like system parameters...Imp one would be Item Validation Organization
    Make sure item is also available in the price list which you are using in order
    Mahendra

Maybe you are looking for

  • Phone charging problems please help!

    This morning my phone was charging fine until I got to class and tried to charge it and it wouldn't work. Now it only charges when it is off but it doesn't die fast. Please help. This phone is a month old so it's brand new.

  • W32TM reverting to old settings.

    Hi all, I have an issue which is driving me crazy and thought I would reach out to the experts. I am trying to update the time sources on a few servers running 2008 SP2, however it continually reverts back. Scenario - Windows Server 2008 SP2 - Not jo

  • I've bought a new remote for my apple TV and now I can't access the menu

    I just bought a new remote for my Apple TV since I lost the original one.  Now I cannot access the menu as all I get is the standard "screen saver".  Even then, sometimes it won't even turn on, so I have to unplug it and wait two minutes and then plu

  • Reconciliation JE via DI

    We are working to implement a SAP Business One complex installation. Several document, Payment and JE are created Via DI because are create in an external Legacy System. We need to do a reconciliation of BP after Doc, Paym and JE are stored. I well k

  • Join 2 tables which are not related with any primary-foriegn key constraint

    Hello, How to join 2 tables which are not related with any primary key foreign key constraint. Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows) Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 row