1099 Forms output not created
Hello
I have downloaded the seeded 1099 template provided. Modified the necessary changes, saved it as Adobe Version5.0 or later and created a new template in the Apps.
When I run the conc program the output file is not getting created. Any input or experience in this regard is much appreciated.
I figured out the problem.
Report had a placeholder column called APPLICATIONS TEMPLATE REPORT with spaces in it.
I deleted the column and that took care of it.
Similar Messages
-
Adobe forms output not showing
Hi,
Iam working on ECC5.0 version.
i created adobe form after click on test button it will ask for output device.
i checked with all output device options but i did not see the output.
any configuration required for seeing the adobe forms output?
Regards,
SureshHi,
First question is do you have Adobe Document Services (ADS) in your system landscape? This is essential to generate output from adobe forms.
If your ADS is set up you can call function module FP_GET_LAST_ADS_ERRSTR after you call the generated form function module you will get the last error message from the ADS.
Regards,
Nick -
Adobe form output not getting displayed for the whole length of the page
Hi All,
I have developed an adobe form using webdynpro application. While testing, the output(pdf) does not occupy the entire page/screen from end-user side. But when I test the same from my side, the output appears fine . Could anyone suggest me on this?
Regards,
Allwin.Did you check the resolution at end user side? Is it different from your resolution?
To overcome this check what is the height and width you have specified for InteractiveFormUI element in your Web Dynpro application. Have you specified in pixels like 300px? You need to enter it as 100% for both.
Chintan -
Payment Program F110 is not creating spool
Hello experts,
We are very close to the go-live and facing a major issue with Automatic Payment Program F110. We asked the dev to design Z check form for F110. Our form works well with manual Run ( F-58), we can see spool as well as print but when we Run the F110 the same form does not create any spool nor print anything. Even though its create the check, done the posting but no spool no print. The error we are getting it is 'No printer fonts maintained for Message no. TD327' . IT people sets all the fonts but no luck.
appritiate the comments.
ThanksHi,
take a look on this sap note.
i hope it help you.
Regds
Note 391852 - Message TD327 (No printer fonts maintained for &)
Summary
Symptom
The system displays error message TD327 (No printer fonts maintained for &) during the print although the device type of the printer has a base device type with printer fonts.
Additional key words
IW31, IW32, IW3D, IW21, IW22, IW23
Cause and prerequisites
The device type has not separate printer fonts but inherits them from the base device type.
Solution
Implement the program correction as specified in the -
All lines on PDF form are not printing
Greetings to all. I am running Adobe Acrobat XI version 11.0.0 on Windows 7 Home 64bit OS. I have made an attempt to print a PDF form. All of the lines in the form will not print. The properties of the document are: PDF Producer: MAC OS X 10.7.4 Quartz PDFContext and PDF Version: 1.3 (Acrobat 4.x). My printer is HP PSC 2350 series. There are about 30 lines on the form and out of the 30, 4 lines will not print. This form was not created by me. I saved the PDF from my university's website. Also and strangely, when I go to my printer settings and select Booklet, under Page Sizing & Handling, everything prints perfectly. I did try editing the lines by increasing the stroke width under Content and Editing but all of the lines still will not print. Here is a screenshot of the form from the website. My question is what settings on my printer or adobe acrobat do I need to change? Or what could be the cause of this issue? Any help would be greatly appreciated. Please do not hesitate to respond if more information is needed.
Most likely, the fault lies with the application used to fill in the forms,
which is probably Apple Preview, that is known to cause this problem. You
can fix the forms with this utility:
http://blog.practicalpdf.com/2013/08/introducing-the-practicalpdf-fix-form-utility/
And in the future instruct your users not to use Preview, but only Adobe
Reader (or Adobe Acrobat). -
Error in opening the PDF file created from the smart form output.
Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RKCheck the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize TYPE i,
w_lines_txt TYPE i,
w_lines_bin TYPE i.
DATA:
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z195_TEST'
IMPORTING
fm_name = w_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IMPORTING
job_output_info = t_otfdata
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
'-' "w_stat_descr w_action_desc
INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
* separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = t_objpack
object_header = wa_objhead
contents_bin = t_objbin
contents_txt = t_objtxt
receivers = t_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
ENDIF. -
Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"
In Adobe Acrobat use a Action for this.
-
Partner function copied from PO to Outb.del. but output message not created
Hello Gurus,
As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
after the manual save?
Kind regards
ChrisI have just explained this in Copy partner from PO to inbound delivery
-
The system could not create any outputs for mv type 561
Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.issue is resolved
-
I have Adobe Acrobat Standard (version 9.4.6). I am trying to create a form but when I start the form wizard, locate the document to convert and click next, I get an error message "Acrobat could not create a new PDF form." What's wrong? (I've used this feature before in Adobe Pro so I am familiar with the process but I am using Standard now). It's not letting me upload my document (an MS Word 2003 document). Please, someone, anyone, help! I think I got a bad batch of software here. Any suggestions? If it's hopeless, who do I call for a replacement if that's the case? Is this software under warranty?
Hello Michael,
Thank you for your email. The file I am trying to convert to PDF and create a form with is a MS Office Word 2003 file. It isn't any specific file; the issue happens every time. I type my text in the Word doc and then proceed to open Adobe Acrobat Standard and use the wizard to create a form from an existing file. I tried to repairing the software but it does not help. Any other suggestions? Is this version of software defective? I really need this feature. I look forward to your reply. Thanks.
Angela -
I have imported all objects from an old access db (.adp file) into a new db (.accdb). All of my data lives in sql server so I have added all the tables and views to the .accdb as linked tables. My forms all connect to data, but I am having issues
with a sub form. The sub form does not allow for creation of children records tied to the parent record the way the old db did/does.
Correct - old format .adp file (notice the empty second record in sub-form with the defaulted date of today's date):
Incorrect - new .accdb file (notice the lack of empty second record in sub-form like above):
If I click the create new record icon in the bottom of the subform, it creates a completely blank record not tied to the parent record (fields blacked out in screen shots above). When using this button all parent record fields are blank.
I have also verified the child table used in the sub-form has a valid Fky relationship to parent table used in the parent form.
Have you checked each forms 'Filter' property (in Design view) to make sure they are blank and that each forms 'Filter On Load' property to make sure it is set to 'No'? Also, you might try inserting the following commands in each forms On
Open event:
DoCmd.RunCommand acCmdRemoveAllFilters
DoCmd.ShowAllRecords
If you can open each forms Record Source and they are showing that new records are able to be entered (the new record * is showing at the bottom of the recordset), then check each forms On Load and On Open events to make sure there is no filtering.
In addition, check any macro or VBA commands behind the button that opens the main form to make sure there is no SQL filtering in the DoCmd.OpenForm command.
If one of the forms Record Source does NOT allow new records, then you will need to change that Record Source so the new record * indicator shows.
Out of ideas at this point. -
Should not create any output file when invalid input source schema
I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?I'd ask them over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Submit Form Via Webmail Is Not Creating Email In Drafts Folder
Bottom Line Up Front: PDF's Submit via Email (Webmail) is not creating the email in the Webmail account.
What I am using:
=============
* Adobe Acrobat Pro XI; however, I have a lot of users using Adobe Reader.
* Yahoo! email
What I am trying to do:
==================
Send the data from a completed pdf to an email address via webmail.
What Works:
===========
Using the default application - Microsoft Outlook, the form's data is placed into an XML attachment and an email is created for review and transmission.
What Isn't Working:
===============
Sending the same form via the Webmail feature. Acrobat first provided the Yahoo account name and password handshake screen, and then I authorized Acrobat to use my Yahoo account. The form provided a status bar that indicated the email was being created and the attachment being added to the email; however, no email was ever created (and placed in my draft folder) and no email was sent (checked there too.)
What I've Confirmed:
================
I've gone to my Yahoo account's "Manage Apps and Website Connections" and confirmed that Acrobat is permitted to create emails (among other things). I've tested the non-webmail (default) email. I've confirmed in my Acrobat Pro XI preferences that the email account is there.
All help is greatly appreciated.Yes. However, if I receive that 500th back I have violated the License. Though I believe you need to go back and read it again It seems to say you can only send out 500 copies.
Either way would be breaking the intent of the license agreement.
WE have fought hard just to get this little change made (for benefit of very small Business or even non-profits). So we don't want to cause Adobe to pull this out of the next version because of misuse. -
I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data
Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
If you only have the free Reader then you can still do it, but it requires a script. -
I want XSLT do not create any output file
I have a xslt file.
<xsl:variable name="var:InValidReceiptCount">
.... In here. I want xslt do not create any output file, also an empty file
</xsl:variable>
Thanks for helping :)If you can tell us your application scenario and why you are trying to control the output name only with xslt, then we can drive you towards correct direction. Remember you cannot control output path with xslt.
if you are using bizTalk, you have to use xslt with maps and set the output path at ports
if you are using .net, you have to control it from your dotnet code.
Xslt alone cannot control the output path.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Maybe you are looking for
-
Hi, I have an analog signal connected with a threshold peak detector. The counted peaks shall be divided by the total time of the recorded signal. My problem is, I don't know how to connect just the the x-values, i.e. the time component of the signal
-
I had to erase my HD, I have Snow Leopard and Mountain Lion was added for an upgrade after that, now when I try to download the OS X, my HD looks like it going to take it, then it goes no where. And now what is showing up is OS X Maverick for a down
-
Can I share my iTunes card with my wife?
-
We have recently subscribed to Forms Central and are in the process of creating our first form for commercial use. This form is quite long and hence we have enabled the ability for the user to 'Save' the form at any point and return to it. This works
-
Getting started. how do I sent my ipod data to another drive?
Ok. I just got my first ipod. I decided to get the classic. I started to transfer some of my music from my external hard drive onto my ipod with itunes..but I guess everything is saving on my itunes list on my mac drive. Is there a way to keep all th