1099 Vendor ??
Is there a need to activate Withholding tax functionality when creating or reporting 1099 vendors if there is no tax withheld?
Can we just create the 1099 by filling the fields of tax numbers ? Is there anything else that is reqquired for creating 1099 vendor?
Hi
for details on this 1099 MISC reporting. SAP Note No. 363650 clearly explains how to configure this. As not everyone seems to be having access to this note, I thought of reproducing it here. At the end, vendor master maintenance for 1099 vendors also is covered, which is not a part of the SAP Note.
A) How to configure extended withholding tax to get correct 1099MISC reporting?
1) Define a type:Go to IMG path:-> Financial Accounting Global Settings -> Withholding Tax -> Extended Withholdng Tax -> Calculation -> Withholding Tax Type -> Define Withholding Tax Type for Payment Posting
Define one withholding tax type for 1099 federal reporting. If state withholding tax needs to be withheld, a second withholding tax type needs to be created to allow two withholding tax postings for one vendor.
2) Define a code:
Go to IMG path: -> Financial Accounting Global Setting -> Withholding Tax -> Extended Withholdng Tax -> Calculation -> Withholding Tax Code -> Define Withholing Tax Code
Define one code for each box of the 1099MISC form where a base amount needs to be reported.
The codes must have the following numbering to get correct reporting:
TYPE CODE DESCRIPTION W/T PERCENTAGE
FE 01 Rents 0%
FE 02 Royalties 0%
FE 03 Other Income 0%
FE 05 Fishing boat proceeds 0%
FE 06 Medical and health care payments 0%
FE 07 Nonemployee compensation 0%
FE 08 Substitute payment in lieu of dividends 0%
FE 09 Direct Sales to a buyer for resale 0%
FE 10 Crop insurance proceeds 0%FE 3b or 13 Excess golden parachute 0%
FE 3c or 14 Gross proceeds to an attorney 0%
FE 7b Section 409A income 0%
FE 15 Section 409A deferrals 0%
Base amount, percentage to tax : 100 %
Postings, Post.indic. 1
Calculation, With/tax rate: leave blank
If tax must be withheld, a new code must be created starting with an F. Example F1 for rents. In this case fill the followig field as follows:
Calculation, With/tax rate: 30%
The codes for tax rate 30% should look as follows:
TYPE CODE DESCRIPTION W/T PERCENTAGE
FE F1 Rents 30%
FE F2 Royalties 30%
FE F3 Other Income 30%
FE F5 Fishing boat proceeds 30%
FE F6 Medical and health care payments 30%
FE F7 Nonemployee compensation 30%
FE F8 Substitute payment in lieu of dividends 30%
FE F9 Direct Sales to a buyer for resale 30%
FE F0 Crop insurance proceeds 30%
FE Fb Excess golden parachute 30%
FE Fc Gross proceeds to an attorney 30%
FE Fd Section 409A deferrals 30%
FE Fe Section 409A inocme 30%
If state tax must be withheld, assign a second type to the company code as follows:
TYPE CODE DESCRIPTION W/T PERCENTAGE
ST 16 State tax withheld depending on state
3) Assign Withholding Tax Types to Company Code:
Go to IMG path: -> Financial Accounting -> Financial Accounting Global Settings -> Withholding Tax -> Extended Withholding Tax -> Company Code -> Assign Witholding Tax Types to Company Code
Switch on: Vendor data, With/tax agent and fill the validity period.
4) Assign an Account:
Go to IMG path: -> Financial Accounting -> Financial Accounting Global Settings -> Withholding Tax -> Extended Wtihholding Tax -> Postings -> Account for Withholding Tax -> Define Accounts for Withholding Tax to be paid over
B) How to configure classical withholding tax for 1099MISC reporting
1) Define a code
Go to IMG path: -> Financial Accounting Global Settings -> Withholding Tax -> Withholding Tax -> Calculation -> Maintain Tax Codes
Define one code for each box of the 1099MISC form where a base amount needs to be reported.
The codes must have the following numbering to get correct reporting (2001 reporting):
CODE DESCRIPTION
01 Rents
02 Royalties
03 Other Income
05 Fishing Boat Proceeds
06 Medical and health care payments
07 Nonemployee compensation
08 Substitute payments in lieu of dividends or interest
09 Direct Sales to a buyer for resale
10 Crop Insurance proceeds
13 or 3B Excess Golden parachute
14 or 3c Gross proceeds paid to an attorney
7B Section 409A income
15 Section 409A deferrals
Percentage subject to tax : 100 %
Mark box :Posting with the payment.
If tax must be withheld, a new code must be created starting with an F, Example F1 for Rents. In this case fill the fields as follows:
CODE DESCRIPTIOn
F1 Rents
F2 Royalties
F3 Other Income
F5 Fishing boat proceeds
F6 Medical and health care payments
F7 Nonemployee compensation
F8 Substitute payment in lieu of dividends
F9 Direct Sales to a buyer for resale
F0 Crop Insurance Proceeds
FB Excess golden parachute
FC Gross proceeds to an attorney
FD Section 409A deferrals
FE Section 409A income
Percentage subject to tax: 100%
Withholding tax rate: 30% (or valid rate for reporting year)
Mark box: Posting with payment
To flag a vendor in SAP as a 1099 vendor, two fields need to be populated.
1. On the Control screen of the vendor master, populate either "Tax Code 1" field with vendor's Social Security Number or ITIN if it is an individual or "Tax Code 2" field with his corporate tax ID for corporate vendors. The format for SSN/ITIN is xxx-xx-xxxx and corporate tax ID is xx-xxxxxxx.
2. On the Accounting Info. screen, populate the "W.tax code" field under the "Withholding Tax" box.
Any posts done before this changes were implemented will not show on 1099. You will need to run program RFWT0020 to flag 1099 items retroactively.
If the withholding tax base amount and/or the withholding tax code needs to be changed after an invoice has been cleared please follow the procedure below:
1) Change Document Change Rules
Go to IMG -> Financial Accounting Global Settings -> Document -> Line Item -> Document Change Rules
Go to account Type K field name BSEG-QSSHB and click off Line item not cleared.
Go to account Type K field name BSEG-QSSKZ and click off Line item not cleared.
2) Change Document Change Rules for extended withholding tax
Go to IMG -> Financial Accounting Global Settings -> Line Item -> Document Change Rules
Go to account Type K field name
Go to field WITH_ITEM-WT_QSSHB and click on 'Field can be changed'
Go to field WITH_ITEM-WT_WITHCD and click on 'Field can be changed'
3) Change Witholding Tax Code
Go to IMG -> Financial Accounting Global Settings -> Withholding Tax -> Withholding Tax -> Calculation -> Check witholding tax codes
Go to the respective withholding tax code and click off Posting with payment.
4) Change the payment document of the invoice which needs to be changed.
5) Your changed documents will be selected with report RFW1099M
Please reward points if helpful!!!
Thanks
Similar Messages
-
Urgent!!! 1099 vendor reporting issues.
Hi SAP Gurus,
I have few issues on 1099 reporting I wonder if anyone could help address these below issues.
1. I did all the configuration for 1099 reporting on vendor master and I am running RFW1099M and RFIDYYWT programs to see the cleared vendor line items but I can see only few vendors cleared line items and the other vendors items are not getting displayed. I double checked the vendor master the settings are exactly the same except WH tax codes.
2. The 1099 Minimum amounts on the RFW1099M program doesn't seem to work coz it displays all the items which are less than the 1099 Minimum amounts mentioned in the selection screen for example it was mentioned $600 on selection screen of the Minimum amounts field now it displays items which are less than $600.
3. There are 9 specific Return types (Business specific) along with WH Tax codes and the combination of both leads to 1099 minimum amounts. How to achieve this requirement? for example see below.
Return,Type WH Tax code Description 1099 Minimum
1 1 Gross Dividends on Stock 10
1 7 Cash liquidation distributions 600
3 6 Mortgage interest received 600
6 1 Earnings from S&L, cr unions 10
Kind Regards,
BobHi Bob,
I am not sure whether its a Basis question. However, I found a similar forum with same issue. Please refer to below link
Report 1099 program(RFW1099M) issue
1099 report- program RFTW0010/RFTW0020
1099 vendors, S_PL0_09000314 - 1099-Misc
Regards,
Arjun -
1099 vendors, S_PL0_09000314 - 1099-Misc
Hi,
I have an issue while running the S_PL0_09000314 - 1099-Misc report. I created a test 1099 vendor, by maintaining (1) tax number under tax information and (2) Witholding tax code 07 for the vendor. With these settings, I posted an invoice and paid the vendor.
The issue is while running the report S_PL0_09000314 - 1099-Misc, it says "list contains no data" (under vendors with correct TIN). However, in the same report, I was able to see the vendor listed under Wrong TIN:Vendors.
Also, when I ran the 1099 listings (S_ALR_87012143 - 1099 Listings), it showed the vendor with the list of documents posted/cleared.
What could be the problem that S_PL0_09000314 - 1099-Misc is not showing the vendor under under vendors with correct TIN. Am I missing something here?
Any help is hightly appreciated.
Thanks,
RamHi Dominic,
I would appreciate if you could help me on the following
When I run S_P00_07000134 - Generic Withholding Tax Reporting to generate the 1099 output I get the following errors
1. Company code 3000's witholding tax reference number is missing
2. Unable to print form IDWTCERT_US_1099MISC
I chose the following in the program
Process group: US_1099
Output group: US1
Am I missing any configuration or something else here?
Would appreciate any kind of help.
Thanks -
With holding tax base amount for 1099 vendors with discounted payment term
Hi Friends,
We have a below situation for 1099 vendors,
Some of the 1099 vendors are set-up in the system with payment term with discounts i.e. 2% if paid within 10 days
As per config, system posts with holding tax base amount at the time of posting payment.
With holding tax rate is 0%,
Based on modified net amount calculation
and
Cash discount calculation before w/tax calculation
When we have vendor with input tax, system excludes tax amount at the time of payment but for the with holding tax base calculation amount system does not exclude input tax type.
Which causes difference in 1099 misc vendors
Below is the example of how system calculates the amount.
Invoice $ 1000, payment term 2% if paid within 10 days. Input tax 7.25%
Payment going out=
$1000- $ 72.5(tax 7.25%) = $ 927.5 18.55 [2% discount] = $ 908.95 (payment amount)
With holding base calculation =
$ 1000 100 (2% discount) = $ 900
Difference between payment going out and with holding tax base = 908.98 900 = 8.98
Can some one please tell me how to get rid off this difference?
Moreover, please tell me if its normal to have 1099 vendors with discounted payment term.
Any thoughts on above situation will be helpful
Edited by: Shefford William on Jan 28, 2008 11:36 PMDear All
i am also having the same problem. The example is
Net invoice Value = $ 100,000
Input Tax @ 15% = $ 15,000
Total Invoice Value = $ 115,000
Cash Discount = 20% with in 20 days
On payment the system behavior should be
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,325 ( 3.5% of 95,000 the Inv Value - Cash Discount that is $ 115,000 - $20,000)
Credit Bank Account = $ 91,675 ( Inv value - Cash Dic - W/H tax that is $ 115,000 - 20,000 - 3325 = 91,675)
However at the time of payment system is calculating tax as follows
Debit Vendor invoice Value = $ 115,000
Debit Cash Discount @ 20% = $ 20,000 ( 20% of the Net Invoice Value that is 20% of $ 100,000)
Credit W/H Tax deduction @ 3.5% = $ 3,220 ( 3.5% of 92,000 the Inv Value - Cash Discount that is $ 115,000 - $23,000. This $ 23,000 is only calculated for W/H tax calculation that is 20% of $ 115,000 )
Credit Bank Account = $ 91,780 ( Inv value - Cash Dis - W/H tax that is $ 115,000 - 20,000 - 3220 = 91,780)
this is not the common practice when using the net base value in the system.
Can any one help me in this regard. I really have been stucked in this problem for many days
Regards
Bilal Athar -
Please try to understand my question here. I am not asking where is the integration point between AP and payroll, I know it is the personnel number entered in vendor master.
Here is the scenario. Payroll in SAP maintains the withholding taxes calculation for 1099 vendors. Some 1099 vendors are paid through payroll, while some outside SAP through some external AP software. If I run the 1099 report in AP in SAP , will it pick up the 1099 vendors (since the withholding tax calculation is doen in payroll)??? Do I need to do any configuration in Withholding taxes under "Financial Accounting Global settins" in SPRO or not.
Second question, do I have to activate withholding taxes in this scenario or not. If yes, should it be activated after conversion or before.
Also during conversion, do I need to bring over the values of withholding tax codes like 7, 16 etc in vendor master or not. Do I need to give them in LSMW mapping of conversion of vendor master or not???
ThanxHi,
A vendor to whom an agency must report payment for goods or services to the Internal Revenue Service (IRS).
To flag a vendor in SAP as a 1099 vendor, two fields need to be populated.
1. On the Control screen of the vendor master, populate either "Tax Code 1" field with his social security number if his social security number is his tax id. or "Tax Code 2" field with his corporate tax id. if he has been issued a corporate tax id. Input either of the two in their correct format i.e. social security as xxx-xx-xxxx or corporate id as xx-xxxxxxx.
2. On the Accounting Info. screen, populate the "W.tax code" field under the "Withholding Tax" box with the value "07" if it is a US vendor or "42" if it is a foreign vendor.
These are the two fields that specify a vendor as being a 1099 vendor.
Any posts done before this changes were implemented will not show on 1099.
You will need to run program RFWT0020 to flag 1099 items retroactively.
...and/or you can change the "Document Change rules" for BSEG-QSSHB and BESG-QSSKZ for account type "K" so that you can change the Withholding tax code after the line item has been cleared (i.e. after entering the required information in the vendor master record as the user above has recommended) (Refer to OSS Note: 363650).
But if you use MIRO to post invoices, you might want to look at Note 482245 too...
Check the link - http://www.sap-img.com/financial/1099-misc.htm
<i><b>* Pls. assign points, if useful as promised :)</b></i>
regards,
Sridevi
Message was edited by:
Sridevi -
Handling expenses for 1099 vendors
Hi,
We are live with ECC 6.0 and have a requirement that the company business expenses, such as travel etc. that are paid out to 1099 vendors must NOT be included in the 1099 report at year end. In the old system, we handled this using two vendor master data created for every 1099 vendor, one to be used to enter expenses only and the other one for 1099 reporting. Does anyone have a solution for this problem in SAP using single vendor master data per 1099 vendor?
Thank you,
KyungHi Sharabh,
Thanks again for your reply. I have two more questions:
Do you know whether there is a way to switch on Extended withholding tax functionality to make the MIRO transaction come up with the withholding tax detail tab?
Right now the withholding tax detail information is stored at the invoice header level. Is there anyway to make it at the line item level so that we can enter both expense items and 1099 compensation items in one invoice and specify withholding tax details at the line item level?
Thank you & best regards,
Kyung -
Importance of 1099 vendors.
HI sap guru's
could any one pls clarify the diff b/w vendor and 1099 vendors. is there any specific reasons toser vendor as a 1099 vendor. pls give some real time examples.
thanks in advance.
regards,
sivaHi Siva Reddy,
A vendor is an entity is business who supplies you goods and services. Example- Raw material supplier for your company.
============================================================
According to regulations, any independent contractors that you paid more than $600 in the prior fiscal year be issued an IRS Form 1099 in US. Independent contractors (ICs) are simply people who are in business for themselves. They earn their livelihoods from their own independent businesses instead of depending upon an employer to earn a living. I
Example- Consultants, freelancers, the self-employed and even entrepreneurs and business owners.
In othe rwords you can say that any vendor to whom an agency must report payment for goods or services to the Internal Revenue Service (IRS) are 1099 venodrs.
Hope this solves ur query. please assign points and close the thread.
Rgds
Manish -
Some 1099 vendors get "No records were selected" RFIDYYWT RFW1099M
Hello People,
I have a problem with 1099 output with programs like RFIDYYWT and RFW1099M as I have done all the customizing settings for 1099 vendors in vendor master like setting up WH tax code and filling up tax number field xx-xxxxxxx in order to execute and print 1099 MISC form through RFIDYYWT program but to my surprise I was able to get output with posted invoices for some vendors but for some other vendors it says " No records were selected" eventhough there are posted invoices against them....I am confused ..any idea why this is happening?
Regards,
BobHi Bob,
Even though your configuration seems to be correct, also check as to whether you have correctly assigned the WH codes etc in the vendor masters. Also check whether such WH codes and types are correctly populating at the document line item level.
Hope this helps.
Vikas. -
Hello,
Kindly let me know the procedures to print misc forms for 1099 vendors for the beginning of 2009.
We have a bunch of 1099 vendors. I have never worked on this before so will apHello,
If you want to print the 1099 report with the 2008 layout you have to
implement the note 1279366 by importing the transport files.
To implement the changes please import the attached transports. The
transports contain the following files:
IDWTFILE_US_1099
IDWTFILE_US_1099G
IDWTFILE_US_1099INT
IDDEBT_1099C
and the following forms:
IDWTCERT_US_1099MISC
IDWTCERT_US_1099MISC1
IDWTCERT_US_1099G
IDWTCERT_US_1099INT
IDDEBT_1099C
If you have any issues with the transports please refer to the following
Notes: 480180 and 13719 which explains how to apply Attached transports.
Extra info:
The report RFW1099M, are valid only up to release 4.6C; from release,
the customer should use the report RFIDYYWT.
We suggest to customers to use the RFIDYYWT program in 470->. This
program has all the updates for legal changes.
The RFW1099M is used by customers in lower release. In 470 release norm-
ally we provide changes to RFIDYYWT.
Please read the documentation of the report through Trx SE38.The report
contains all the new legal requirements - This does not necessarily mean
that your Customer/Vendor set-up needs to be changed.
The forms IDWTCERT_1099MISC ... all exists in your system.
You can see them in transaction code: smartforms
Please note that in the output group configuration for RFIDYYWT report
program you can configure 'TWO' forms.
The 'FIRST' form as 'IDWTCERT_US_1099MISC' and the 'SECOND' form as
'IDWTCERT_US_1099MISC1.
The first form always print 2 vendors per page and the second form alway
prints a vendor twice in a single page as the requirement is, for copy A
and copy B of IRS 1099 filing.
Hope that helps,
Jon -
1099 vendors - details required
hello,
business wants to generate 1099 for their 1099 vendors. I have never worked on this aspect of FI, please let me know in details , the procedures behind this, I will be glad to provide more information if required.
Thanks very much.Hi,
Check this link.
http://www.sapficoconsultant.com/Bonus/Extended%20Withholding%20tax%20configuration.pdf
Thanks,
Rau -
Transfer payable from one 1099 vendor to another?
Hi all,
We're trying to put SAP's 1099 functionality in place for 2011 (first time we're using it). We have it working about 99% correctly, but there's one scenario where the system isn't calculating the vendors' base amount as we would expect it to.
The scenario is that a vendor invoice is created for the wrong vendor (say vendor A) and needs to be 'transferred' to the correct vendor (say vendor B). Our finance folks are currently correcting the situation by posting an accounting document (doc type AB) crediting vendor B via posting key 31 (Invoice) and debiting vendor A via posting key 28 (Payment Clearing).
When the 1099 process is run, the invoice amount is now included on vendor B's 1099, as expected, however it hasn't been cleared off of vendor A's 1099. In other words, the invoice is being included on both vendors' 1099's.
Does anyone know how we can resolve this issue? IIs there a different/better way to transfer the invoice from one vendor to another? Or is there something I need to chance in how we are running the 1099 process to make sure that both sides of the transfer posting are picked up?
Thanks in advance for any guidance.
AllisonNo.
You can try contacting itunes support to see if they can do this, not sure.
http://www.apple.com/support/itunes -
1099 vendors report!!!!!!!!
Hi Gurus
HI,
We are on ECC 6.0.
We would like to generate the following report in SAP:
1). S_P00_07000134 - Generic Withholding Tax Reporting
When we run these transaction, we get error that no data is selected.
Can anyone throw light on what we are missing?
Regards,Kavitha,
It's nearly impossible for anyone on this forum to find out what's wrong with your system, especially because we don't have access to your system.
However, there are a few things you can try to find out exactly what's the reason for no data being selected.
- Run the report for a single vendor / select few vendors
- Run the report for a small date range instead of running it for the full year
- Run the t.code S_ALR_87012143 (Report RFKQSU20). This report actually speaking should not be used for versions more than 4.7 ENT, but it gives a satisfactory list of 1099-relevant items and vendor lists. This should give you an idea whether you should expect an outcome in S_P00_07000134 or not.
- Double check your customizing, to see if you're missing something there.
And of course, don't forget to look at the OSS notes for S_P00_07000134 (report RFIDYYWT). In particular, check out the following:
- 1015877 (Legal changes - 1099INT, 1099G Reporting - Year2006)
- 1004311 (Legal Changes - 2006 - Form and File for 1099MISC Reporting)
- 1047533 (RFIDYYWT,1099,US,Vendors with payments<$600 reported)
- 1092297 (RFIDYYWT - US Reversal documents to be filtered out)
- 1086738 (Discount on Payment Reversals - US Reporting)
- 363650 (Withholding Tax Configuration for 1099MISC)
There are more. I'll let you explore those on yourself.
Any of those could be a reason why your report is not displaying anything to you.
Let me know whether this helps.
Remember to assign points if found useful.
Regards
Gulshan -
Hi,
We have some vendors who have the same TIN numbers but different addresses. When filing with IRS for 1099, do we need to combine the amounts for each of the duplicate vendors or send it separately?
Thanks.
S.VijayWe had some what similar situation but we , maintained them using alternative payee rather than paying them through different vendor masters.
At the year end you will need to combine all those payments made to vendor and send to IRS , per TIN. -
We have vendors that are paid via the procurement card that are classified as 1099 vendors. As such new IRS rules state that even though the actual payment to the vendor comes from the bank, we are required to include the payment amounts in the 1099 form. Since these transactions were through the procurement card, the actual vendor related payments are not recorded in SAP.
Is there a method in SAP for handling vendors that are paid via credit card and do not have actual transactions in the system? Also, it is possible to "gross-up" the amount printed on a 1099 form for vendors that were paid directly from SAP (which is included on the 1099) but were also paid with a credit card in some instances?
We are using ECC 6.0 (no enhancement packs) and using basic Withholding (we are not using Extended functionality). For printing of the 1099 we are using transaction S_P00_07000134 Generic Withholding Tax Reporting.Brian
We have similar situation.
We create dummy invoices and payments which do not hit our financials. We have defined posting keys 39/29 and document types YW/YQ just for this and transactions are posted using special GL indicator. We have defined alternate recon account 800001 for actual recon a/c 200001. We psot dummy invoice to vendor which gets to 800001 and then when we make payment, it is reversed balancing the accounts. This account is not part of our financial reporting.
I am sure, there may be other ways too.
Thanks
Rajesh -
Hi
When i run the 1099 vendor reprt. It just shows the vendor and his Tax id. How ever when i lcik the line items it doesnt show the witholding tax amout and other deails. I have maintained the tax number nadthe witholding tax code in vendor master. I did check the witholding tax account(fs10n) , where i see the amount
, but not when i run the report. Am i missing something
thanks
sapsriSapsri,
What transaction are you using to run this "1099 vendor report" that you mention?
Is it S_PL0_09000314 (program RFW1099M)
If yes, then you can check the following:
- on the selection screen, under the section for "Output Control", you have selected at least "Vendors" and "Payment Document Single Item".
- when you see the output, you must be seeing lots of icons in a bar near the top of the screen. Here's what pressing each of them will mean to you:
-- V_O - List of Vendors with correct TIN
-- V_E - List of Vendors with wrong TIN
-- L_I - Line Items (selected for output)
More icons will appear depending on whether you've chosen to create a file, and asked for it to be displayed on the output screen.
For your primary query, to see line items, press the button that says L_I on it.
Remember to assign points if found useful.
Regards
Gulshan
Maybe you are looking for
-
Trying to erase disk but has been 'unmounting' for a long time
Tried to erase disk before but then failed (could not unmount disk). I had Yosemite but when I restarted my MacBook pro it reverted to Mountain Lion (not a problem as I hated Yosemite). I assume that something was erased but when I go to download Mou
-
Songs stop after a minute of play
I just downloaded an album on iTunes and some of the songs stop after a minute and move on to the next song. I'm having a real tough time finding an answer to this one. Does anyone know of a fix for this? Maybe a re-download? Cheers!
-
How to BackUp Restore Large Library "original file could not be found"
I've searched the archives for this with no clear answer, and am reposting to avoid confusing anyone. I am working on a manual and seamless BACKUP-RESTORE process to manage my large 100-gigabyte-plus iTunes library. +++++ First, my iTunes folder is i
-
Problem with pass data to smartform
hi guru. i found a question and need advise for solve this problem. i create a smartform about tax, this form use sorted and index data from zreport to display in form. i declare structure of tab and structure of type in report as same as structure o
-
Migration from JSF 1.1 to 1.2 using WebLogic 10.3
I am upgrading my application from JSF 1.1 to JSF 1.2 and to Web Logic 10.3. Initially everything seems to be fine when the page displays. Problem occurs only when my page is being submitted. I am getting the following error message on the screen whe