11.1.2 Oracle Process Manager - start error

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Similar Messages

Oracle enterperise manager start error

I have oracle database 11GR2 on windows 7 when i want to start enterprise manager , the error in below is shown : Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\SHOJAIE>emctl start dbconsole Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved. https://SHOJAIE-PC:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...System error 5 has occurred. Access is denied.

check if oracle services is up and running, also export ORACLE_SID, ORACLE_HOME and ORACLE_BASE and try again.
any new error?

Unable to run the oracle Process Manager service

Unable to run the services of
1) oracle Process Manager service(EPM_epmsystem1)
2) Oracle Process Manager (ohsInstance1649849633)
error message is displayed as below.
Error 1053 the service did not respond to the start or control request in timely fashion.
Thanks.

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

Oracle Process Manager failed to start(11.1.2)

Hi all!
I've installed and configured 11.1.2 on my VM(Win 2003 SP2)
Then i've been trying to start system but during launching Oracle Process manager I get the following error
Could not start Oracle Process Manage service(ohsInstance3250625901) on local computer
Error 1053: The service did not respond to the start request in a timely fashion
Then i checked Event log
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help?
Regards
Alexander
Edited by: Softperson on 9/8/2010 15:36

Hi Jasmine
I've found a lot of errors in event viewer
Some of them bellow
"The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
Regards
Alexander

Oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

Chinu,
What error are you getting?
Have you checked the logs?
The best thing to do is set everything back to the base install, such as RPD and webcat which can prevent presentation services from starting up properly

Issue with Oracle Process Manager

Hi All,
I've installed Hyperion Planning on one server few days back. Now i've installed HFM on other server. The shared services is common which i've given is the First server (Where Planning is installed). The Planning server is working fine. When i'm trying to start Oracle Process Manager in the second server (Where HFM is installed) it is giving the message as "Could not start the Oracle Process Manager EPM_epmsystem1 service on Local computer" and The System cannot find the path specified.
I've installed & configured WebLogic on both servers (Planning & HFM)
Is this service required for HFM ? I think it is for Essbase. correct me if i'm wrong. Do we need to run this service on the second server ? (HFM Server). What is the main purpose of this server. Pls. advice.
Thanks,
PVR

Hi John,
Thanks so much for the Reply. As i mentioned earlier i've 2 servers. First server is for Planning and the second server is for HFM. I would like to use the shared services for both Planning & HFM on the first server. For launching workspace, if i type http://firstserver:19000/workspace, i can see Planning. To see HFM, do i need to launch http://firstserver:19000/worksapce or i need to launch http://secondserver:19000/workspace. I'm thinking that HFM will be available by launching http://secondserver:19000/workspace URL instead of the first URL, but i did't find the option of Configure webserver in the second server (HFM server). Pls. advice
Also, while configuring i've given other database for Reporting and Anaysis instead of the existing database. Also, given the server as second server (HFM server) during the configuration of Reporting and Analysis. Can you pls. kindly help and advice with the situation i've mentioned here
Thanks,
PVR

How to stop Oracle Process Manager(Instances) ?

Hi,
I have installed OBIEE 11g. For some purpose I tried to stop the Oracle Process Manager(Instances) in services.msc. But it not get stopped its keep showing as stopping.
Is there any command to force shutdown this serives or is there any other way to stop this?
Thanks,
Satheesh

Hi User6787,
I have did what you said? while doing that only I got that issue.
What Saichand told worked well.
Thanks,
Satheesh

Oracle Process Manager(instance1) Service does not start

Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7

Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp

Oracle Enterprise Manager - HTTP error: 503 Service Unavailable

Dear all,
some time ago I've upgraded Oracle Database 10g up to version 10.2.0.4.0 on a Linux system.
Now if I try to connect to HTTP Oracle Enterprise Manager interface (http://(My server name):1158/em/console/aboutApplication) I see this error into my browser: "503 Service Unavailable - Service is not initialized correctly. The Em Key is not configured properly. Run "emctl status emkey" for more details."
If I perform "emctl status dbconsole" command from command line I have this output
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
So I've tried to restart Oracle Enterprise Manager trough command line using "emctl start dbconsole":
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .... started.
Now dbconsole seems to be running as follows
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
but my browser always shows the same above error.
If I try to perform the suggested "emctl status emkey" command trough command line I have this output:
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Please enter repository password: (Here I put sysman password)
Exception caught
ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:330)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:287)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:744)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:217)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:968)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1189)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3369)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3475)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4399)
at oracle.sysman.emSDK.conf.ConfigManager.startupEmKey(ConfigManager.java:855)
at oracle.sysman.emSDK.conf.ConfigManager.statusEmKeyInRepos(ConfigManager.java:1113)
at oracle.sysman.eml.sec.rep.EmKeyUtil.statusEmKey(EmKeyUtil.java:273)
at oracle.sysman.eml.sec.rep.EmKeyUtil.main(EmKeyUtil.java:583)
I've done no changes on Linux operating system side.
Could somebody help me, please?
Thanks for help and regards.
DragonsLordKERNEL
Edited by: DragonsLordKERNEL on 17-nov-2008 11.06

Check if your emkey file is still under $ORACLE_HOME/sysman/config/emkey.ora
Also check Oracle doc,
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/security2.htm#BABJGGIG
consider remove the recreate emkey if it doesn't work out.

Oracle Identity Manager Configuration Error

Versions I have used for the Installation:
Software Version
Oracle Database 11.2.0
Repository Creation Utility 11.1.1.5.0
Web logic 10.3.6
SOA Suite 11.1.1.6.0
Fusion Middle ware Installer 11.1.1.5.0
JDK Oracle Web-logic JRockit JDK or Sun JDK 1.6.0_29
Error : Config Action Oracle Identity Manager Configuration failed
Exception waring occurs in web logic Server :
<Aug 14, 2012 11:57:53 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Ser
ver started in RUNNING mode>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141239> <The no
n-dynamic attribute AuthenticationProviders on weblogic.management.security.Real
mMBeanImpl@581c390c([OIDM]/SecurityConfiguration[OIDM]/Realms[myrealm]) has been
changed. This may require redeploying or rebooting configured entities>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141238> <A non-
dynamic change has been made which affects the server AdminServer. This server m
ust be rebooted in order to consume this change.>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141239> <The no
n-dynamic attribute ControlFlag on weblogic.security.providers.authentication.De
faultAuthenticatorMBeanImpl@80d076be([OIDM]/SecurityConfiguration[OIDM]/Realms[m
yrealm]/AuthenticationProviders[DefaultAuthenticator]) has been changed. This ma
y require redeploying or rebooting configured entities>
<Aug 14, 2012 12:03:49 PM GMT+05:30> <Warning> <Management> <BEA-141238> <A non-
dynamic change has been made which affects the server AdminServer. This server m
ust be rebooted in order to consume this change.>
Please give me a solution to resolve the issue

Each version has its won libraries and certain bug fixes. It's always good to see certification matrix first for any software and proceed with installation as per certified components. Also, vendor support your project only if you are using their certified versions. :)
regards,
GP

Oracle Process Manager gone after applying patch set 10.1.3.4.0

Hi everyone,
I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
Exception
Operation failed because:
Domain creation error.
An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
I was using SOA suite 10.1.3.0 and it was working properly before upgrade. Now, I can see the version of BPEL Console has changed to 10.1.3.4.0 and still I can login to Enterprise Manager and ESB conole properly but I missed BPEL Console somehow.
I ran the setup from patch set and selected the Oracle Home for my soa suite 10.1.3.0 and continue the rest of installation. I don't know where I did mistake.
I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
Thanks
Esfand

This forum is for 11g. Try asking your question on the SOA Suite forum here
SOA Suite
Heidi.

11.1.2 Oracle Process Manager - start error

Similar Messages

Maybe you are looking for