£130 Connection Fee - Waived But Not For Long.....

Good evening all,
I really do hope someone can help me out with this problem I am currently having with regards to a connection fee charge.
I have been a BT landline customer since 2007 and up until a few months ago had not encountered a single problem hence when this occurred I genuinely thought it would take one single phenomenal to fix. Unfortunately this was not the case.
The problem started when I moved address and entered my new property on the 31st of July, approximately 6 miles away from my old address. Along with the usual things like SKY TV etc, all my services were taken care of by  'Home Move' teams, BT seemed to be the most difficult to negotiate. Because I was moving to a different exchange area, I would have to cancel my long standing account and open a new one. I spoke to a few UK staff members on call and there was no mention of a charge.
After longing and hoping that I did not have to wait too long for a phone connection in my new apartment so that I could get my broadband up and running, I was told on call that an engineer would have to come out and install a line within the property so booked a day off work to be in the flat.
Even better than taking a day off to wait in all day, was the text message I received from 'BTSMS' stating that my "advised appointment on the 12-AUG 2011 between 1pm and 6pm is no longer required for order (VOL011-XXXXXXXXXXXX) Our records show that you already have a phone socket and wiring within your home and can complete the order without the need to visit."
Long story short, my phoneline was working in the flat (SKY tv requires an active line to access interactive services) so without BT actually needing to do anything, the line was in there already
The problem was, I soon received a bill in confirming there had been a £130 charge to my account. I called, waiting 50 minutes on the phone and spoke to Offshore (India) who were sympathetic to my situation and he seemed to understand what the problem was. He stated he would be able to reverse the charge.
No sooner had 48 hours passed and I received another bill through the post explaining I HAD been charged £130 for a connection fee.
I subsequently went through the rigmarole of phoning Offshore, speaking to 2 further administrators and a Manager who promised to look into my queries, even pulling the necessary phenomenal to listen to and call me back - I never received a call back.
That in itself, for one of the worlds largest communication companies, unable to call a customer back, is just plain ignorant.
I have steered away from contacting the Office of Fair Trading, OFCOM etc as I do believe this to be an easily rectifiable mistake but I have lost hope and require guidance please from anyone that may have been through this before.
Thank you.

Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • Brush, sliders suddenly became super fast, but not for long

    I work on a 30" monitor on a core 2 duo 3 GHz machine. The brush normally refreshes at what looks like a choppy 4 frames a second or so. In this strange instance, it was more like 20 fps.
    Twice now, for no apparent reason, when using the local correction brush, it suddenly became very fast. It did this by seemingly using a localized low quality screen refresh mode; the area around the brush looked pixelated until I released the mouse, then it would snap into sharpness a moment later.
    This is MUCH better than the regular behavior, but I can't figure out why it did this! After a while, it would revert back to regular mode.
    I've only had the good fortune to experience this on two photos out of about 15,000 edited.
    Does anyone know what might be happening, and if there is a way to permanently keep it active?

    OK, go to the set audio record path dialogue
    This is actually can be anywhere you have permission to write to. Normally I use a folder in the song's folder labeled "Audio Fles". This is kind of the default.
    That really is probably what you need to set.
    J

  • P965 Platinum has power but not for long - newbie error?

    I press the power button and the PSU and CPU fan spin up for a second then shut right down. No beeping or anything. I removed all other components - mobo outside of case w/ 24-pin power, CPU power and CPU fan plugged in. Same result with or without RAM, with or without graphics card. D Bracket briefly shows all 4 lights when power is supplied. What's up? I'm a total newbie to assembling computers - what am I doing wrong?
    I tried removing the CPU power and when I do that the PSU fan (and light) comes alive and stays alive when I press power. So it seems PSU is good.
    - MSI P965 Platinum
    - Intel E6600 Core 2 Duo
    - Cooler Master 550W PSU
    - Mushkin 2GB (2x1GB) EM2-6400 5-5-5-12 DDR2-800
    - EVGA GeForce 8800 GTS 320MB
    - ASUS SATA optical drive
    - Western Digital SATA HDD

    Quote from: NovJoe on 01-May-07, 22:49:02
    Yes, you should see a 4 / 8 pin connector near the CPU bracket area where you can plug the molex connector to. Change tha 8 pin out for the 4 pin connector.
    Why change the 8 pin out for a 4 pin?
    Make sure CPU is seated properly. Try with vid card and 1 stick of ram only. I would suggest motherboard out of the case but you say you are doing that.
    The manual on this Power Supply indicates the following which can help you decide which connectors to use: (http://www.coolermaster.com/installation_manual/Manual_550W_SLI.pdf)
    P1 - ATX Connector - 12v1
    P2 - 8 pin Connector - 12v2
    P3 - 4 Pin connector - 12v2
    P4 - 6 pin pcie connector - 12v1
    P5 - 6 pin pcie connector - 12v2
    P6-P8 - SATA Connectors - 12v3
    P9 - P14 - Molex Connectors - 12v1
    P15 - Floppy COnnector - 12v1
     

  • Can connect to appstore but not can't download songs or music albums

    can connect to appstore but not can't download songs or music albums in mp3.

    Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
    Regards.

  • I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

    I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • My computer will connect to wifi but not the Internet

    My computer will connect to wifi but not the Internet. It's not a problem with my router because I've tried other devices on the same router and they work. I have also tried my computer on other routers and there is still no Internet connection. Does anyone know how to fix this?

    Hello Bmowat,
    Thank you for using Apple Support Communities!
    It sounds like you are able to successfully connect to your Wifi network, but cannot get internet access.
    I found this article for you named Wi-Fi: How to troubleshoot Wi-Fi connectivity found here http://support.apple.com/kb/HT4628?viewlocale=en_US
    This section in particular since you have Mountain Lion installed:
    OS X Mountain Lion v10.8.4 or later
    Use the Wireless Diagnostics application included with OS X Mountain Lion v10.8.4 and later to identify and resolve Wi-Fi issues. For further information, please see About Wireless Diagnostics.
    It is a built in troubleshooting tool to help diagnose and repair network issues and should help you resolve this issue.
    All the very best,
    Sterling

  • I can connect to WiFi but not the internet

    I am trying to connect a new IPad 2.  I have a Belkin router that is B+G+N.  I use WPA2 encryption and MAC filtering.  The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email.  When I type any URL in Safari it takes me to my router's management page.  In fact I can log into my router and manage it from my IPad but I can't connect to anything else.  I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's.  This has me baffled.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I can connect to MAC but not my PC

    I have a new Nano, that connects to Mac but not my PC. When I try to connect to PC it says "iTunes as detected a Macintosh formatted iPod. You must restore this iPod before you can use it on Windows."
    How can I get my Nano to work on both?
    Thanks!

    Windows cannot read a Mac formatted disk.
    You need to Restore on iTunes for Windows and it will then work on Mac & Windows.

  • Router works for desktop, but not for surrounding laptops.

    The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

    Are you able to see your router's network  name on your laptop? If yes, then follow the below mentioned settings.
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Linked server works for sa but not for user

    I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
    When the user tries it the following error is thrown:
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
    I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

    this link should give all the connection string to sql server
    http://www.connectionstrings.com/sql-server/
    but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see  a call from this config file with username - myapplication??
    Hope it Helps!!

  • My apple tv will not authenticate my nba league pass login--I am in the United States and the same login/pw works for my iPad, but not for apple tv.

    My NBA League Pass login cannot be authenticated -- I am in the United States and the same league pass name and password are working for my iPad, but not for my apple tv.

    I have this same issue and am becoming quite upset. NBA has absolutely no contact information to call and resolve this issue. I just spent $139.99 and cannot connect to Apple TV, while the same login works just fine on my iMac and iPad. When I signed up, the information provided indicated that I could view live games on Apple TV. What the ****?

  • GarageBand - Controller's Foot Pedal (in AUSampler) works for one track but not for another

    I am learning how to use AUSampler in GarageBand. I am using a MIDI controller (Alesis Q88) with a foot pedal for the sustain.
    The sustain works with the default sound in AUSampler (Sine 440), but not for a sound that I imported. Also, my imported sound plays longer the lower the keys played, and the higher up the keys the faster it plays. Either way, it doesn't allow sustain, but yet the default sound does.
    I know where the Controller / Sustain Pedal area is within the Piano Roll but that doesn't fix my dilemma.
    I presume my problem is related to the viola sound I imported (wav format), or the way I need to set something up; I hope the latter.
    Any clues?
    Many thanks in advance.

    HI Bob,
    You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
    Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
    208.67.222.222
    208.67.220.220
    See if that helps.
    Carolyn

  • Transfer cost price from free of charge item to main item but not for VPRS

    Hi,
    I want to transfer cost price from free of charge item to main item but not for VPRS but for a new Z contidion type.
    For CO-PA proposes. Can you help me with This?
    Catarina Alves

    hi,
    transfer of cost from sub item to main item is configured in the delivery to billing copy control for the main item. go to VTFL  > select the required item cateogry > here at the bottom you will find a check box Cummulate cost. Tick it.
    Not really what you meant COPA purposes. But the pricing conditions are mapped to COPA value fields at KE4I transaction.
    regards
    sadhu kishore

  • My phone is not showing up in itunes.  I want to sync it.  I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes.  What do I do now?  It says to reinstall itunes if you have windows but not for mac.  Help!

    My phone is not showing up in itunes.  I want to sync it.  I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes.  What do I do now?  It says to reinstall itunes if you have windows but not for mac.  Help!

    With your phone plugged in, open Image Capture and see if the iPhone shows up.  If not, you are having a sync problem.  If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.

  • Unable to update apps since I have closed my Verizon e-mail account.  The old ID address pops up and I can not do updates.  I can not use the old password since the account is closed.  I have a new ID and password on my laptop but not for my I phone.

    My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps.  Even if I knew the password I would have to access the old e-mail account which I can not do.  I have an ID and password for my new laptop but not for my I phone which is under a Verizon service contract....ugh!!!  Thanks

    kenfromsouth jordan wrote:
    My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps.  Even if I knew the password I would have to access the old e-mail account which I can not do.
    You don't need to access the email account.
    Use the link provided by robdrage to update your old AppleID.

Maybe you are looking for