2 issues: SD port & Magic Mouse.

Alright, so currently I've been having two problems with my MacBook Pro, which I purchased in mid-May.
The first is that my SD port is no longer accepting my SD cards. Whenever I plug something in, nothing happens. I've tried 3 different cards, and when I plug them into my Father's computer, they work just fine.
The second issue is with my Magic Mouse. I often seem to lose connectivity, and I'm not sure why.
Any help would be lovely.

For the SD card I would take the machine to an Apple store or AASP. Can't help with the Magic Mouse.

Similar Messages

Ugly issue with my Magic Mouse

I have a Magic Mouse that has work essentially flawlessly for quite a while.
I run VMware Fusion so I can run Windows XP and the Magic Mouse worked great there as well. Tonight I was trying something and I told VMware Fusion to connect the Apple Bluetooth USB Host Controller to Windows XP. Well, at this point my Magic Mouse connectivity stopped and man did my troubles begin.
I quickly told Vmware to disconnect the USB Host Controller from Windows but this hasn't fixed my new issues with the Magic Mouse. At this point my Magic Mouse is barely functional.
The symptoms are this:
- If I disconnect the mouse using the tool bar blue tooth indicator and then reconnect it, the blue tooth indicator says the mouse is connected but it doesn't work. I have to physically power down the mouse and back on before it work.
- When it does kinda work, the mouse at times "jumps" across the screen so I have to be very careful how quickly I move it at times.
- The multi-touch scroll feature no longer works. It worked in Windows XP as well ... not any more.
- When I click on the bluetooth icon and try to bring up the Mouse Properties it takes QUITE a long time.
When I try to get the system to "discover" the mouse again, it can take quite a long time and the following shows up in the Console App:
10/7/10 2:32:58 AM kernel [0e65d000][BNBMouseDevice::init][54] init is complete
10/7/10 2:32:59 AM kernel [0e65d000][BNBMouseDevice::handleStart][54] Done
10/7/10 2:32:59 AM kernel [10ee2880][AppleMultitouchDevice::start] entered
10/7/10 2:32:59 AM kernel [0f5f3900][AppleMultitouchHIDEventDriver::start] entered
10/7/10 2:33:02 AM kernel [BNBMouseDevice][waitForData][d8-30-62-38-b8-ff] Timeout waiting for data
10/7/10 2:33:02 AM kernel [BNBMouseDevice][getExtendedReport] getReport returned error e00002d6
10/7/10 2:33:02 AM kernel [BNBMouseDevice][updateBatteryLevel] Couldn't get battery percentage from device
10/7/10 2:33:06 AM kernel [BNBMouseDevice][waitForData][d8-30-62-38-b8-ff] Timeout waiting for data
10/7/10 2:33:06 AM kernel [0e65d000][BNBMouseDevice::_simpleGetReport][54] ERROR: getReport returned error 0xe00002d6
10/7/10 2:33:06 AM kernel [0e65d000][BNBMouseDevice::_getMultitouchReport][54] Bad argument: *length is 0
10/7/10 2:33:06 AM kernel [10ee2880][AppleMultitouchDevice::_deviceGetReportWithLookUp] ERROR: getMultitouchReport returned error 0xe00002c2
10/7/10 2:33:09 AM kernel [BNBMouseDevice][waitForData][d8-30-62-38-b8-ff] Timeout waiting for data
10/7/10 2:33:09 AM kernel [BNBMouseDevice][getExtendedReport] getReport returned error e00002d6
10/7/10 2:33:09 AM kernel [BNBMouseDevice][updateBatteryLevel] Couldn't get battery percentage from device
10/7/10 2:33:13 AM kernel [BNBMouseDevice][waitForData][d8-30-62-38-b8-ff] Timeout waiting for data
10/7/10 2:33:13 AM kernel [0e65d000][BNBMouseDevice::_simpleGetReport][54] ERROR: getReport returned error 0xe00002d6
10/7/10 2:33:13 AM kernel [0e65d000][BNBMouseDevice::_getMultitouchReport][54] Bad argument: *length is 0
10/7/10 2:33:13 AM kernel [10ee2880][AppleMultitouchDevice::_deviceGetReportWithLookUp] ERROR: getMultitouchReport returned error 0xe00002c2
10/7/10 2:33:17 AM kernel [BNBMouseDevice][waitForData][d8-30-62-38-b8-ff] Timeout waiting for data
10/7/10 2:33:17 AM kernel [0e65d000][BNBMouseDevice::_simpleGetReport][54] ERROR: getReport returned error 0xe00002d6
<snip>
I want my Magic Mouse back !!!!
Any idea anyone ?
P.S. I'm sssssoooo freak'n mad to VMware right now.

Sounds to me like you have one of several issues going on there.
You may have a lot of interference in the same frequency as your bluetooth device.
Or - you may have a bad bluetooth transceiver in either your mouse or your computer.
Take the mouse to another computer with bluetooth on it and sync it to that - if it works fine then your computer or your environment is the culprit there ( um this assumes that you took your mouse to another location, say your friends house where the interference threshold is bound to be different than at your house), and you should then take your computer out of the house for the day, and see how the mouse works away from home.
If the mouse is bad - you will have issues if you take it to another location - replace it - check warranty
If you think is is your house / place you have your computer, that may contain an the interference that messes with your mouse:
Try turning everything off you can think of in your house / office, and see if it gets better. Also - a big one - make sure that your computer and mouse are not to close to any speakers / etc, as they do have a magnetic field that could cause a mess with bluetooth mice. (rare but it happens)
As you can see in your error message:
10/7/10 2:32:59 AM kernel 0f5f3900AppleMultitouchHIDEventDriver::start entered
10/7/10 2:33:02 AM kernel BNBMouseDevicewaitForDatad8-30-62-38-b8-ff Timeout waiting for data
10/7/10 2:33:02 AM kernel BNBMouseDevicegetExtendedReport getReport returned error e00002d6
it made a connection - then timed out -
Also check the silly things - like are the batteries dead?
Last thing I can think of - is to delete the mouse all together, then re-discover it -
Um - after replacing the batteries of coursse - just to be SURE.
Then you can turn everything back on in vmware etc - you may also want to make sure that you have the latest version and additions etc installed.
Good luck!

MAC OS X 10.6.3 issues with iTunes/Magic mouse

This is strange. Somehow I was able to upgrade Snow Leopard 10.6 to 10.6.3. How was that possible? I did this about a week or so ago. 10.6.3 is not available on Apple's download site today 2-7-2010. How did I get access to it?
A couple of weeks ago, I bought the Snow Leopard CD and installed it over my Tiger OS, without any problems. Then i bought a wireless keyboard and magic mouse which prompted me to upgrade Snow Leopard to 10.6.2., as well as upgrade the software to the wireless peripherals. Went to Apple's download page and somehow downloaded OS X 10.6.3. Hmmm? I also installed the latest security update at this time too. After all installs, at this point, I wasn't experiencing any issues with my laptop.
But then, I upgraded iTunes to 9.0.3. At this point I started experiencing problems after shutting down and then booting up the next day. iTunes began playing music slowly, music wasn't garbled, but the songs sounded out of tune (playing from my hard drive). Also, my wireless magic mouse got jumpy and exhibited delayed reaction. I ended up reinstalling OS X 10.6 (from the cd) over the existing OS (10.6.3), and now iTunes works just fine. The reinstall of OS X 10.6 from the cd did wipe out my software upgrades for the wireless peripherals and i have yet to upgrade them. i'm just glad iTunes is working well again.
My questions are: Was the problem with iTunes playing slowly an iTunes issue? Or was the root problem from the upgrade to OS X 10.6.3, and therefor an OS problem? Why was my mouse also displaying problems? And how was I able to get OS X 10.6.3 from Apple several days ago when they don't have that version available for download on the site today? Confusing.

My questions are: Was the problem with iTunes playing slowly an iTunes issue? Or was the root problem from the upgrade to OS X 10.6.3, and therefor an OS problem?
Even if a user has access to the beta, and knew of an issue they are working on, he/she would not be able to comment on it here. This forum is only for OS's that have been released and is covered by a Terms of Use agreement.
Sounds like you got an unintended update in some sort of fluke accident, and since you've removed it, there's no way of telling what caused the problem or if it was the OS or program or both.

TS3048 are there any known issues with the magic mouse? i believe mine is buggy and has been crashing Logic

mac pro quad core 2.8Ghz Lion 10.7.4 12 GB ram
magic mouse behaves very erratically; seems buggy and tracks slow. will crash Logic when rubber-banding or moving events in piano roll edit windeo. very frustrating. have not been able to duplicate this crash using my old wired mouse (from my G4)
someone at a Mac store suggested i may have a"bad" mouse... what gives? any help would be appreciated. i will be happy to replace the mouse if that is the issue...robert

Hello,
In answer to your question, I have not heard of any "known problems."
The device may, indeed, be faulty. Try resetting the PRAM and SMC before you buy a new one.
Barry

Premiere CC 2014 - Magic Mouse issues?

I know most professionals might prefer not using Apple's Magic Mouse for professional applications, but I happen to kind-of like the mouse.
However, since using the latest version of Premiere CC 2014, I've noticed some very erratic behavior with the Magic Mouse. Click-dragging to move clips on my timeline doesn't always work. Sensitivity is delayed in zooming in on the timeline. Scrolling lags. Etc. etc.
Anyone else have any issues using the Magic Mouse? All my other non-Adobe applications seem to be working fine with this mouse, though I have notice some similar sensitivity issues with the mouse in Illustrator and InDesign.
I'm hoping there will just be a bug fix or something, as I've been having to resort to using a wired mouse, which is a clunky fix.

EXACT SAME THING HERE Can't find answer !!
drag and drop clip is ssssooooooooooooo frustrating !!
I have to use a usb mouse for premiere and magic mouse for e-mail and other stuff...
unacceptable !
I discovered that what makes it not to work is simply the horizontal scroll of the "middle button". if you click, start draging a clip and your finger move of half of 1mm, then it just end the move there... same for rectangle selection !
hate that !
I'm getting pain in the arm because I switch mouse all the time and they are obviously not the same speed and this change my work flow and lot of stuff ! This is a tiny problem causing huge problem !!

Magic Mouse Issue (video) other then known lag problem

Hi,
I have a big issue with the magic mouse.
It's better that you just watch the video.
Makes it a lot easier then explaining it.
http://www.youtube.com/watch?v=0hd5lnWz864

I´m having a similar thing, no error message, though.
The mouse does not do any scrolling etc, only left + right click.
Can´t install the "WirelessMouseSoftware", the installer says there´s a later version of this software already installed...

Screen maginified and jumps around. Magic mouse issues

All of a sudden my magic mouse will zoom things without my command. It has magnified my screen so the whole screen (desktop) is not visible at one time and I can't figure out how to put it back the way it was. In the meantime, when I move the move everything jumps around. HELP! What is going on?

Sorry, I don't think you understand the problem I'm having. The mouse acts on its own all of a sudden. For example I will be in an application and just move the mouse (without touching the keyboard or attempting to click anything) and the screen will zoom to 400%. Now my desktop screen is so zoomed in that the top or bottom is missing. So when I move the mouse the whole screen jumps up and down or from side to side. No amount of tinkering in System Preferences has fixed it. Changing the screen resolution makes it worse actually. Holding the Control key on the desktop just brings up the menu for the desktop. It does nothing.
I've read that there are issues with the magic mouse. I guess that would be correct.

Magic mouse problems with MacPro 2013

Installed my new Mac Pro version late 2013 and all was working well. Yesterday I added two USB3 hubs and now I am having issues with my Magic Mouse. It looses its conection and is erradic in operation. Would be surprised if it was the hubs but I suppose I should disconect them and find out. Thought the new MacPro would have a better antena on the Bluetooth. Mouse has 60% power. What items will interfere with bluetooth. I am also using Parallels with Windows 7 running.

I suspect it is the hubs. Bluetooth on a Mac uses USB ports.
If you look at "about this Mac>system reports>USB" you will see what I mean.
Barry

Magic Mouse troubles

Hello,
Recently, I have noticed an issue with my Magic Mouse which started recently and was wondering whether it may be the notebook or the actual mouse.
Problem: not responding to its settings.
Details: In System Preferences>Mouse>More Gestures, I have all options are unchecked. Yet, by (inadvertently) sliding/swiping my finger from left to right or from right to left, the page I am working on will slide from right to left or from left to right respectively. It's not only weird; it's really irritating. Has anyone any idea of what may be going wrong?
Data:
MacBook Pro 15" running on Mavericks (OS X 10.9.2);
Warranty just died;
Magic Mouse about 2-years old (up down scrolling working fine);
I have tried changing the batteries just in case (to no avail);
I am right-handed.
Thanks,
Emile
Message was edited by: nucho

Yes, I suppose. Unfortunately, I am in Mexico and not in Mexico City. No chance of finding a genius bar. This just may come down to having to, either live with this or buy a new mouse. Hopefully, the problem lies with the mouse and not with MBP.
Thanks for you responses. I appreciate it.
EN

Apple Magic Mouse--right click not working, left-right scroll not working

Brand new out of the box, right click does not work and neither do the left-right swipe. Is it likely I have a faulty mouse, or is there a software update or setting I have failed to find? Running 10.6.4 on brand new MacBook Air. Experts--help please

I have the same issue. My magic mouse is only about a year old and i honestly don't use it that often... it seems to me the right click is not "connecting" well as i have to click several times or very hard to get it to make a clicking sound. not sure if its stiff or broken or not.
Overall I'm pretty frustrated as this thing was EXPENSIVE.
Any ideas how to fix it?

Magic Mouse won't work in Windows 7 anymore

Hey there,
I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
Note: I am running Snow Leopard, NOT Lion.

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

My apple magic mouse doesn't work in windows 7 after installing maverick os x

My apple magic mouse doesn't work in windows 7 after installing the maverick operating system on my mackbook pro. How do I fix this problem?

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

Delayed Magic Mouse response

I have been having on again off again issues with my magic mouse that is only a month old. Sometimes it will begin to stutter my movements making it extremely annoying to use since you have to correct and correct and correct. It will also while doing this randomly lose connection. My bluetooth keyboard stays paired just fine. I switched the batteries in the mouse for band new ones and it says they are 99% charged. I "air dusted" the laser to see if something was blocking it. I even went as far to clean wipe my computer to see if my third party magic mouse app was to blame(after this it worked fine for a few days and then once again began to act up.) I'm not really sure what else to do besides just contact apple, but i bought it at a best buy and am not sure if i can just go to an apple store in that instance. if anyone has any idea of somethings I can try i would greatly appreciate it! i searched the forums for a similar problem and did not see any so i hope this is not a repost.
Thanks A lot!!!

Hi Hope and Peace,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
Troubleshooting wireless mouse and keyboard issues
I hope this information helps ....
Have a great day!
- Judy

Using Aperture with a Magic Mouse

Is anyone else having issues using a Magic Mouse while editing photos? Somehow I'm accidentally activating the swipe motion which causes me to scroll through my library while editing. I've tried turning off swipe motions, which works in Finder, but Aperture still swipes.

I too am not enjoying at all how the Magic Mouse functions in Aperture. All too often just touching the mouse to do an aperture specific task, the mouse misinterprets the touch as a go to start scrolling through my large libraries. Then I have to get back to the right image (usually one I am editing) and be extremely careful with how I touch the mouse. This is not only aggravating but also a BIG waste of time -- two things that Apple has always (and should always) avoid. There was no issue with this with my old Mighty Mouse as the "ball" was very unlikely to be triggered accidentally and start the application scrolling through the images. On the other hand, I will most certainly NOT miss the balls propensity to "crud up". Hopefully this new purchase does not involve a Sophie's Choice - constantly cleaning the mouse or constantly having to get back to the image you were working on. Apple should be shooting for the best of both worlds.
On the other hand the MM is great when I'm working many other applications. I strongly agree with the previous comment that the MM control panel should have an application specific tab. That way I could disable the scroll feature when working in Aperture. Another alternative might be the ability to narrow down the "active" part of the mouse surface to minimize the chances of inadvertently activating the scroll feature.
I really hope there is a fix for this as I am frustrated enough that the MM is about to head to the drawer and I'll either go back to my Mighty Mouse or more likely a 3rd party traditional interface but blue tooth mouse.
Cheers

Two Magic Mouses, same batteries, different charge percentage

I noticed an annoying issue with a Magic Mouse: it shows a very low charge level of the batteries inside, and it's not just a visualization problem because it actually turns off when the level goes under 20% or so.
The problem is related to this particular Magic Mouse because I tried to put the same battery pack into another Magic Mouse, and this one showed me 100% of battery charge, while the previous one showed 52%.
I tried also to repeat the test with another battery pack, again the faulty Magic Mouse shows 29%, while the other one 99%.
Which could be the cause?

One of the two mice has a faulty charge indicator. It could be either but I suspect the one which turns off at 20%. Mark which batteries are which and go into a professional store that have the facilities (Maplins in the UK) and ask them to do a reading. You can buy a battery charge reader for a few pounds for future use.

2 issues: SD port & Magic Mouse.

Similar Messages

Maybe you are looking for