2 Problems with the Transit Routing API

http://dev.virtualearth.net/REST/V1/Routes/transit?wp.0=30.267750,-97.741299&wp.1=30.267864,-97.741074&output=json&ra=routePath&timeType=Departure&maxSolns=3&key=<removed>&dateTime=04/28/2015
1) This results in no routes as the points are "too close" but if you do it on bing maps (website) it correctly routes you via the 801.
2) The API document states that if you provide no time (date only as seen above) in the dateTime paramter it will use the current time. This appears not to be true and it will default to 7 or 8 AM departure time regardless of time of day.

Testing this on the Bing Maps website I find that it also does not provide route when using transit directions because the points are too close. An easy way to handle this from a user experience side of things is to look for this error and when it shows,
calculate the route again using walking directions.
As for your second point I'm unable to reproduce this. I suspect your issue is with the time zone.
http://rbrundritt.wordpress.com

Similar Messages

ASA 5505 - 2 Internet Connections, Problems with the Default Route

Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
Steffen

Phillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge

I have an iPod Touch 4G and I still have iOS 5.1.1 and the Wifi says it is unable to join the network and my little brother has the same but iOS6 on his, his works fine no problems with the Wifi router! It was working fine yesterday and now it stopped!!:(

It was fine yesterday, this morning got up to do what I usally do, Shut down on me
Called Apple 3 times followed thier instructions (Wifi Troubleshhot and Connectivity) EVERYTHING now its garbage!
I know I can get a protection plan but my mom said thier was no need for one because of the price!
Ive tried updating it...It said it needed wifi!
Dont know! Feel screwd up at this point Can any one help me???!!! It is also a year old! Got it in January and It has not lived to its first birthday!!!:'(

If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple

My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

TS1398 I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And i had checked with my rout

I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And I had checked with my iball baton router with the iball sevice provider.

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

Problem with the NodeManager in Weblogic 10.0 MP1

Hi,
I have a problem starting the Nodemanager successfully. I have currently installed BEA Weblogic 10.0 MP1. The admin server is getting started successfully. When, I start the Nodemanager with the command:
startnodemanager -machine <hostname>, it neither gives the success message nor the error message. It comes to a stand still. Please see the below text, which appears on the Command prompt, when I run the nodemanager command.
Machine PUNITP128166D.ad.infosys.com
Listen Address: PUNITP128166D.ad.infosys.com
Listen Port: 8097
PID for D:\Ariba9r1\shared/bin/startNodeManager.cmd: 5980
D:\Ariba9r1\BuyerDev9r1\Server\bin>
D:\Ariba9r1\BuyerDev9r1\Server>set CLASSPATH=D:\BEA10\wlserver_10.0\server\lib\A
ribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib\tools.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;
D:\Ariba9r1\BuyerDev9r1\Server>chdir /d "D:\Ariba9r1\shared\nodemanager"
D:\Ariba9r1\shared\nodemanager>"D:\BEA10\jdk150_11\bin\java.exe" -client -Xms32m
-Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "D:\BE
A10\wlserver_10.0\server\lib\AribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib
\tools.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic.jar;" -Dbea.home=D:\BEA10 -Djava.security.policy=D:\BEA1
0\wlserver_10.0\server\lib\weblogic.policy -DSavedLogsDirectory=D:\Ariba9r1\shar
ed\nodemanager\logs -DJavaHome=D:\BEA10\jdk150_11 -DTrustedHosts=D:\BEA10\wlserv
er_10.0\common\nodemanager\config\nodemanager.hosts -DListenAddress=PUNITP128166
D.ad.infosys.com -DListenPort=8097 -DReverseDnsEnabled=true -DLogToStderr=true -
DLogFile=D:\Ariba9r1\shared\nodemanager\nodemanager.log -DNodeManagerHome=D:\Ari
ba9r1\shared\nodemanager weblogic.NodeManager
After this, when I check the nodemanager status in Console, then the status appears as REACHABLE. Assuming, this to be the successfully message, I try to start the managed servers associated with the Machine/Server. But, it fails and there appears a message on the console with the status as 'Force Shutting Down' for this server.
When I check the logs, there seems to be some problem with the Nulll exception. Please see the below logs as it appears, its only a part of the logs
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040306> <JMS service is active now.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281003> <SAF Service has been initialized.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281002> <SAF Service has been started.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226120> <BEA-101128> <Initializing HTTP services.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101135> <buyerserver1 is the default Web server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101052> <[HttpServer (defaultWebserver) name: buyerserver1] Initialized>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101129> <Initializing the Web application container.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226198> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC license service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <JMX> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226604> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://PUNITP128166D.ad.infosys.com:8050/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226651> <BEA-000287> <Invoking startup class: ariba.j2ee.appserver.weblogic.Startup.startup(directory=D:\Ariba9r1\BuyerDev9r1\Server)>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227229> <BEA-000288> <ariba.j2ee.appserver.weblogic.Startup reports: Changed directory to D:\Ariba9r1\BuyerDev9r1\Server>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <Management> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227244> <BEA-141187> <Java system properties are defined as follows:
ariba.server.home = D:\Ariba9r1\BuyerDev9r1\Server
awt.toolkit = sun.awt.windows.WToolkit
bea.home = D:\BEA10
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBOracleJDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBDB2JDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBMssqlJDBC.zip;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes;D:\Ariba9r1\BuyerDev9r1\Server\classes\AribaJ2EE.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions;D:\BEA10\wlserver_10.0\server\lib\wls-api.jar
java.class.version = 49.0
java.endorsed.dirs = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed
java.ext.dirs = D:\BEA10\jdk150_11\jre\lib\ext
java.home = D:\BEA10\jdk150_11\jre
java.io.tmpdir = C:\DOCUME~1\suram_vishal\Local Settings\Temp\
java.library.path = D:\BEA10\jdk150_11\bin;.;C:\SYSROOT\system32;C:\SYSROOT;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\jdk150_11\bin;D:\BEA10\patch_wlw1001\profiles\default\native;D:\BEA10\patch_wls1001\profiles\default\native;D:\BEA10\wlserver_10.0\server\native\win\32;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\modules\org.apache.ant_1.6.5\bin;D:\BEA10\jdk150_11\jre\bin;D:\BEA10\jdk150_11\bin;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:/Ariba9r1/BuyerDev9r1/Server/bin/Win32;D:/Ariba9r1/BuyerDev9r1/Server/bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYSROOT\System32\Wbem;C:\Program Files\Java\jre1.5.0_06;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\BEA10\wlserver_10.0\server\native\win\32\oci920_8;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\lib\Win32;D:\Ariba9r1\BuyerDev9r1\Server\internal\lib\Win32
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.5.0_11-b03
java.security.policy = D:\BEA10\wlserver_10.0\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.5
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.5.0_11
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.5.0_11-b03
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.apache.xerces.parsers.SAXParser
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86
os.name = Windows 2003
os.version = 5.2
path.separator = ;
sun.arch.data.model = 32
sun.boot.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\serializer.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xalan.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xercesImpl.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xml-apis.jar;D:\BEA10\jdk150_11\jre\lib\rt.jar;D:\BEA10\jdk150_11\jre\lib\i18n.jar;D:\BEA10\jdk150_11\jre\lib\sunrsasign.jar;D:\BEA10\jdk150_11\jre\lib\jsse.jar;D:\BEA10\jdk150_11\jre\lib\jce.jar;D:\BEA10\jdk150_11\jre\lib\charsets.jar;D:\BEA10\jdk150_11\jre\classes
sun.boot.library.path = D:\BEA10\jdk150_11\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level = Service Pack 2
user.country = US
user.dir = D:\Ariba9r1\BuyerDev9r1\Server
user.home = C:\Documents and Settings\suram_vishal
user.language = en
user.name = suram_vishal
user.timezone = Asia/Calcutta
vde.home = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\ldap
weblogic.Name = buyerserver1
weblogic.ReverseDNSAllowed = false
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.management.server = http://PUNITP128166D.ad.infosys.com:8099
weblogic.net.http.URLStreamHandlerFactory = ariba.util.net.URLStreamHandlerFactory
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\nodemanager\boot.properties
>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229510> <BEA-000365> <Server state changed to STANDBY>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229525> <BEA-000365> <Server state changed to STARTING>
####<Jun 28, 2010 4:20:29 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722229572> <BEA-149209> <Resuming.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230182> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Warning> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-101162> <User defined listener ariba.server.ormsserver.ServletContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)
     at ariba.j2ee.core.J2EEServer.initialize(J2EEServer.java:77)
     at ariba.j2ee.core.AribaServletContextListener.contextInitialized(AribaServletContextListener.java:25)
     at ariba.server.ormsserver.ServletContextListener.contextInitialized(ServletContextListener.java:26)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Jun 28, 2010 4:20:35 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_ADMIN to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Jun 28, 2010 4:20:35 PM IST> <Alert> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Kindly help me in getting this resolved.
Thanks,
Vishal.

The error appears to come from the ariba code. I suggest asking them.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)

Problem with the wireless speed on windows with bootcamp

I've got a problem with the following:
the wireless card of my mac pro is very slow when i run windows on my mac pro with bootcamp
When i just run OSX everything works fine, but in windows, when I connect to the wireless my wireless speed
drops to 11-18mbs.
First I thought that it was a drivers issue, but after the update of bootcamp drivers 1.4 the problem still exist.
First I had a Topcom wireless router now I've bought a Apple Airport Extreme, but the problem isn't solved yet...
The router isn't 2 meters away from my mac.
And the wireless speed is fine when i connect with my dads windows laptop...
Does anyone has a solution? using a cable isnt a solution for me because in September I will move with my mac pro one floor down.

You might want to ask this in the Boot Camp forums. As your wireless work fine under Mac OS X it sounds to be a software issue as opposed to a hardware one which means as Windows users they'll better be able to help.

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

I am having a strange problem with the awesome bar

The awesome bar/location bar is no longer as awesome as it used to be. When I start typing in an address it seems like it no longer checks through my history and gives a list of possible matches but just gives the stem of an address. For example, if I type in 'goo' it will complete this to 'google.com' if I then append this with an '/a' it will complete this to 'google.com/analytics' but that's as good as it gets, as I say, no list from the history or bookmarks.
I've checked the options and also about:config and all the settings are as they should be, as far as I can tell (and I certainly hadn't changed any of them when it started misbehaving). I've also disabled all extensions and plug-ins.
It's driving my slightly bonkers because I quite often use sites with long addresses and can't remember each of the components of each address. I'd switch to using Chrome but I also use Firebug a fair bit so don't really want to do this.

Hi cowtan, <br/>Sorry you are having problems with the awesome bar.
I imagine the new behaviour may be reversed by changing some pref but I have not looked that up.
Regardless of the new behaviour you seem to have some fault as my awesomebar still gives bookmarked items.
As a troubleshooting step try adding an asterisk in the awesomebar (as first character or anywhere) that should then filter the results in the dropdown list to bookmarked only items, does that work ?
* see [[Search your bookmarks, history and tabs with the Awesome Bar#w_changing-results-on-the-fly]]_changing-results-on-the-fly
You possibly have some extension interfering with the awesome bar, try Firefox in safe mode (but do NOT* at this stage try the Reset Firefox option)
<nowiki>*</nowiki>'''edit''' - personal opinion, if a user; such as you; is knowledgeable enough to use ''about.config'' the easy solution of ''FirefoxReset ''is probably not the best route, as it can have unwanted side effects that are avoidable.
* [[Troubleshoot Firefox issues using Safe Mode]]
Do your bookmarked items appear in safe mode ?
<u>Try a new Profile.</u><br/>The best method for troubleshooting this will be to set up a new Firefox profile, you can then: experiment, troubleshoot, alter settings or extensions installed in that profile without changing and potentially damaging your current profile.
* http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
I suggest to prevent unexpected problems you
* use a sensible name such as test 2012 for the profile name
* ensure an empty folder is used & do not then rename or delete the new profile (instead add or delete shortcuts to it)
* also see http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

I have problems with the wi-fi connection after upgrading my iPhone to iOS 5- why?

Since upgrading the software on my iPhone 4 to iOS5, I have had all sorts of wi-fi connection problems.
The wireless router I have always used is now usually not detected by my iPhone. It still works on my MacBook and iPad, but not on my iPhone. When it is detected, the connection lasts for a few minutes before cutting out. The signal is also very low.
I have tried the following:
-Restarting the router
-Restarting my iPhone
-Resetting my network settings
-Restoring to factory defaults
-Forgetting the network
-Rejoining the network
-Setting up the connection manually
-Turning off location services on my iPhone (I read in another thread this would help)
I am running out of ideas and I have tried researching this. I found many people with the same problem but no solution for my problem yet.
Does anyone have any ideas, or know whether Apple is planning on fixing this anytime soon? It's a huge disappointment.

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

Issue about Invoking a BPEL Process with the Generic Java API

I Invoking a BPEL Process with the Generic Java API and apache axis or axis2
it turn up a error as follow:
org.apache.axis2.AxisFault: ORABPEL-08021
Cannot find partner wsdl.
parnterLink "BPELProcess1" is not found in process "BPELProcess1" (revision "v2008_11_17__38943").
Please check the deployment descriptor of the process to find the correct partnerLink name.
     at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:512)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:370)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:416)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:548)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:528)
     at wf.Test_axis2_callws.main(Test_axis2_callws.java:41)
i can't solve it !
what's problem ???
anyone use java code to invoke bpel process successfully..can show me some example?
thanks
chan

Hi,
Check below link may help you solve your problem.
http://www.activevos.com/cec/samples/content/sample-invoke/doc/index.html
Regards

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

2 Problems with the Transit Routing API

Similar Messages

Maybe you are looking for