2 Stereo Outputs?

? [size="3" face="Verdana">Hi,
Im looking to set up my new PCs sound Card settings the same as my old one, but after trying every conceivable way its not happening!
Its a Sound Blaster X-Fi Titanium on Vista.
Basically I want 2 normal stereo outputs to 2 different sets of speakers. set of normal PC speakers & into my amp for better louder sound. What i don't want is any kind of fake surround sound which is all i can achieve at the moment on the rear set, Front set (pc speakers) are working fine.
I had it set up this way for years on my old machine with a Sound Blaster Audigy 2, Just looked and it was set to 6. which this new software does not have.
any help would be great.
CheersMessage Edited by Dibiase on 08-5-2009 : AM

The audio creation interface is a bit complex do you mind explaining it a little.
Let me explain a little, i have my computer, screen and 2. speaker system. This was fine, but?I've?recently moved my room around and now?I've?been able to plug my TV into the computer with the idea to watch movies on it and various other things
So i have the cables all hooked up, have image, but no sound out of the TV i have the VGA + 3.5mm in, and when i change mode it makes sounds, so the connection must work and everything, anyway I've found this thread now so hopefully with your help, I'll get the sound coming out the TV too.
thanks

Similar Messages

How to record stereo output in Logic Pro X

I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
Any help will be highly appreciated.

Send everything to Bus X - Bus X to StereoMstr (for monitoring)
Create new Track/Channel
- for Input choose Bus X
- for Output choose No Output
Engage Record on the newly created track and off you go.
Have a nice day!

Imported concert from MainStage 2, trouble with stereo output.

Hi everyone,
I've imported a concert from mainstage 2 in the newest 3. I don't know why but I found many trouble when setting the output of the project.
I'm using a Focusrite Saffire Pro 24 DSP and when a stereo output is set, I see in mainstage the L-R indicator bars blink. Only the Left indicator works correctly, the Right continue blink and I have no output from that connector.
Has Anyone encountered the same issue? Can anyone help me, or could anyone drive me on the right-way to find an answer?
If more informations are needed just ask
Thanks to everyone.

Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

Multiple stereo outputs when creating a DNxHD MXF OP1a

Hi,
I'm trying to make some DNxHD MXF OP1a's from some source MOVs.
Problem is I am trying to simply passthrough the dual stereo outputs (Full Mix, M&E), outputting as 48kHz 16bit WAV / uncompressed.
Media Encoder seems to only want to deal with one Stereo pair for output, or multiple mono outputs for more than 2 track output.
Does anyone know how to output 2 stereo pairs rather than 4 x mono tracks?? Any help would be appreciated
Ben

Loop preview is monitored via the Prelisten Channel - channel 256 in the environment Mixer, you can also locate it by setting Mixer view to "All" - so route the Prelisten channel to whatever Output you want it to be. Beware that Surround loops will always playback through the channels set in Logic's sourround preferences.

Can I connect the digital output of flat screen to digital stereo output?

can I connect the digital output of flat screen to digital stereo output?

Hello JRefugio,
Welcome to the Sony Community.
Are you referring to a Sony flat screen TV? What is the model number of the device to which you wish to connect the digital output from the flat screen? It is required to know the exact model number of the Sony product so that the appropriate information can be provided.
Thank you for your post.

What audio interfaces for iPad are there that give stereo outputs?

I've had persons tell me that an iPad is not good to use as you would a computer in DJing because it can't do split stereo outputs. I was thinking that perhaps an audio interface that connects through the dock might fix that. Can anyone give me a list of such interfaces?

DJ Arctic wrote:
From what I understand, most headphone splitters (like the Griffin DJ Cable) split the stereo track into two mono tracksone for pre-cueing, one for what the audience hears.
Note that the Griffin DJ Cable does not fall into the same category as "most headphone splitters". It is made specifically with a stereo/mono output for the algoriddim djay app.
This is one of the mono output cables you would need to specifically hunt down.
DJ Arctic wrote:
If you know of a headphone splitter that doesn't do that, but gives two stereo channels, I'd be glad to take a look at it.
All of these are single stereo to double stereo outputs -> Headphone splitters
Ask for a headphone splitter in just about any store (Walmart, Best Buy, Target, 7-11) and you'll get what you want.

How do I assign audio tracks to different stereo outputs?

There doesn't seem to be a menu option on my Audio Track Mixer...

When working with a stereo sequence there is only one stereo output. If you want more tham one you will need a multi channel master. When creating that sequence you can chose how many output channels you need. They will be mono outputs but in the track mixer you will be able to pan between selected odd and even channels.

Discrete stereo outputs in Vi

Is it possible to use the XtremeMusic card to output 4 seperate, discrete, stereo outputs instead of 7. in Vista?By this, I mean be able to assign different sets of outputs to different applications?

A USB headset works essentially as a soundcard, it is it's own audio device and does not use the soundcard. That also can mean that having both set up could cause a conflict, as applications (and Operating Systems) will usually search for a default audio device.
This may be something you need to set up in an application (like the voice app). It would not really relate to the soundcard as it does not work together with the USB headset.
Cat

Stereo output from both RCA pairs on Titanium HD?

Is it possible to use 'RCA Line-In' as a second 'RCA Line Out'? I need 2 stereo outputs to connect? different audio devices and i don't want to use a RCA splitter..

Is it possible to use the 'Headphone jack' at the same with the 'RCA Line Out' ?
Unfortunately not, this is a feature people request regularly, but it doesn't seem like Creative will do anything about it.

Logic Pro X - Stereo Output Disappearing

I have a problem with the Stereo Output channel in the mixer not showing any activity. It seems to be an intermittent fault.
I have two multi-instruments set up (Stylus RMX and Kontakt 5) plus two folders of audio (Vox and Guitar). Stylus works fine with activity on record and playback in all channels and the Output, but Kontakt sometimes doesn't show in the Output channel (even though selecting bounce from that channel does produce a recording). When recording my guitar, activity shows in the channel strip but nothing shows in the Output channel.
Has anyone else come across this? I never had this problem in Logic 8 or 9.

Ah - I have found work-around/solution.
If I click on "read" on the Channel Strip of the Output within the Inspector - I get this issue, but when I click on Read within the channel Strip of Output within the Mixer (and create a channel strip for Output in the Arrange window that way), the channel Strip for Output does not go missing whenever I change something.

Changing the 1-2 stereo outputs to mono in logic

I want to assingn the outputs of each track in Logic individually so that it matches each channel of my recently purchased M-Audio Nrv 10 mixer (which also serves as my soundcard). Can't seem to figure out how to change the outputs (right below 'imputs' button and seen as'1-2') of each strip channel from stereo to mono. Is there an answer to this question? it seems to me, from the responses i've read in this forum, that the answer is still unclear. If you can help it would be greatly appreciated.

You can't change the outputs to mono from the output selection tab, but you can pan each output to route to the correct channel. Set track 1 and track 2 to have 1-2 outputs and pan track 1 all the way to the left and 2 all the way to the right, and you have mono outputs. Continue that with all of your outputs and they all will be mono. If you want to bounce to mono, either bounce the stereo pair and choose 'split LR' under 'stereo file type' or change the output channel strip to mono and then bounce from there. If you change the output channel strip to mono, the tag will still say Output 1-2, which you can just change manually, but if you highlight the channel strip and look at the information to the left of the channel strips, under 'channel' it will say 'Output 1,' instead of Output 1-2. Hope this helps.

Imported files with stereo, output comes in one channel only

While being no expert in Encore or the jungle of transcoding settings, I still dare to ask.
I have imported a number of AVI files (exported with stereo sound from Ppro) into Encore 2.0. I have not touched any sound settings, but still my output (both in preview mode and the final DVD) produces sound only in the left channel. Baffeled as I am over this, I struggle to find some sensible explanation to the problem.
Any feedback would be appreciated as the project hopefully goes into production soon.
Brgds,
Geir Waaler

Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

USB Sound Card: dual stereo output?

I recently bought a Channel Audio Sound Card Adapter which would channel sound through my computer's USB port. Pretty standard it would allow for Stereo headphone out and microphone input:
http://www.ebay.co.uk/itm/USB-2-0-Virtual-7-1-Channel-Audio-Sound-Card-Adapter-3 D-for-XP-Windows-7-Mac-/321480885369?pt=UK_Computing_ComputerComponents_SoundCar ds&hash=item4ad9c10479
I opted for it so I could control from my menu bar where the sound was being directed: http://www.cnet.com/uk/how-to/how-to-quickly-change-audio-output-in-os-x/
However I do not need the microphone in, but do need a second stereo headphone out and would like to know if:
a) A USB adapter exists that will encompass two stereo headphone ports, not a microphone?
b) Whether OS X will be able to distinguish the two so I can control which headphones are in use at any one time from a single USB Sound Card dongle? (note: I am not looking for a Y splitter)
I have read of some OS X software called "SoundSource" from RogueAmoeba, but this has been retired - it would allow for me to flip the microphone port so it would transmit sound, even through the microphone socket, I might have been able to get around it like that? Is there anything else that may be available that could do the job?
Also, I was wondering, if I had to get another USB Sound Card, could I use a USB splitter so that I could plug two USB spun cards into one port and with no loss of quality? USB ports are a premium on my computer.
e.g.
http://www.amazon.com/HDE-Compact-Travel-Speed-4-Port/dp/B009G47NG0/ref=pd_sim_e _14?ie=UTF8&refRID=014JJGAHPFBYASDRCG1B

Hello,
I'd avoid the bus powered 4 port adapter & get an AC powered 4 port hub...
http://eshop.macsales.com/item/MacAlly/TRIHUB4/
http://eshop.macsales.com/item/MacAlly/TRIHUB7/
Audio Midi Setup in Utilities can do some Port aggregation.

Don't Want Dolby Digital For Stereo Outputs

Hi, all. Although FCP X won't natively see the 5.1 tracks of a Sony CX560, it does get the stereo version. That stereo version seems to be a Dolby Pro Logic mixdown of the 5.1 recording though and plays nicely in surround when decoded with Pro Logic. This of course doesn't happen when that stereo mix is encoded as Dolby Digital because when a stereo Dodby Digital bitstream is decoded, it will only play through the left/right speakers. Unlike some other applications, FCP seems to ouput everything only as Dolby Digital, regardless of if it is surround or stereo. So my stereo "Pro Logic" recordings are only playing out the left/right speakers. Is there a way for FCP X to not output stereo mixes as Dolby Digital? Or if I buy Compressor, will I have that control? Thanks.

For those who care about this, it appears you can't change how the audio is exported when exported to an Apple TV device. FCP X will export audio as both an AAC stereo track and as an AC3 Dolby Digital track. If you're trying to accomplish what I wanted to do though, and easy option is to open the exported file in QuickTime Pro 7, open Show Movie Properties, select the AC3 track, delete it and save the file. This worked perfectly and was very easy to do. As for the secondary Compressor question, if I decide to, I'll ask that in the other forum.

Optical audio input to 3.5mm stereo output???

I was wondering if macbook pros can take a digital audio source (i.e. PS3) as an input and output to 3.5mm stereo to a set of analogue speakers, simultaneously.

Use LineIn from RogueAmoeba http://www.rogueamoeba.com/freebies/ to get audio-thru.
Stefan

2 Stereo Outputs?

Similar Messages

Maybe you are looking for