2 x 1TB hard disk in mac mini server, possible?

Hi to all of you,
I see the Mac Mini comes with 2x 500GB hard disk. Since you can now find 1TB hard disk on the Internet I was wondering if the mac mini server would support replacing the 2x500GB HDD by 2 x 1TB HDD?
Anyone has tried it?
Would it support it?
Dag

I wonder the same thing. Power isn't the issue, though, all these drives should draw low enough power that the Mac Mini should be able to handle it, neither should cooling be an issue, since the Mac Mini is AFAIK not passively cooled.
However, most laptop 2.5" drives these days are 9.5mm high, the 1TB drives have the older, these days less common 12.5mm high form factor. So the real question is: does the Mac Mini provide the ability to mount 12.5mm high drives.
FW drives are NOT an option: less performance, and external cables are a recipe for disaster, particularly with any sort of server. Lose cables, corroded connectors, pulling on the wrong cable, separate power supplies that can independently fail, etc. etc.
I'd rather have a 1TB server with a RAID-1 configuration than with a RAID-0 setup...
...and while the thing is open, toss 8GB RAM in...

Similar Messages

  • SSD or spinning disk for Mac Mini server?

    I'm using a Mac Mini 2cd as a media server (operating over wifi), and the hard drive is dying - I'm going to replace it, and was thinking of an ssd (the os is on this drive, the media is on a large external). Would this provide any real world speed increases?
    Thanks!

    I would just run with a standard hard drive then they are much cheaper. You can get a 1TB for about $84
    I have an old G4 Xserve that I use to use for that. But, it is just sitting somewhere collecting dust now.

  • New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
    Thanks for your prompt response,
    Dick Deaton

  • Time capsule 2TB,connected to mac mini server leopard, LG DP1W mediacenter/player for watching movies on my tv from my harddisk tower connected to time capsule by usb/hub on G-technologie 8 TB G-SPEED Q RAID-oplossing(hard disk tower) is this gonna work??

    hello,
    ik have a question about the hardware i wanna buy
    i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
    I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
    i have ordered a Time Capsule 2TB
    i want to connect to the Time capsule this:
    G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
    UPC of EAN nr.: 705487185744 in the mac store
    i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
    LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
    -Connecting the Time Capsule to the Internet
    i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
    i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
    And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
    in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
    Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
    How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
    can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
    how does this works??? to share/upload/download to the internet only to one person????
    i hope someone can help me????

    hello,
    ik have a question about the hardware i wanna buy
    i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
    I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
    i have ordered a Time Capsule 2TB
    i want to connect to the Time capsule this:
    G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
    UPC of EAN nr.: 705487185744 in the mac store
    i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
    LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
    -Connecting the Time Capsule to the Internet
    i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
    i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
    And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
    in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
    Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
    How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
    can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
    how does this works??? to share/upload/download to the internet only to one person????
    i hope someone can help me????

  • Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from  Camelotand Matt Clifton
    Could it be that CORRECT ANSWER needs better defining by Apple?
    That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
    Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

  • Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

    I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

    Your assumption is correct.  The server does however only
    have the Intel HD3000 graphics like the base model with
    no option, at this time, for the discrete graphics chip.  So,
    depending on what you are using it for, that could be a deal
    breaker.  Remember that your MBP does have a discrete
    graphics chip.
    I have a 2011 Mini Server connected to a Thunderbolt display
    that gets used as an engineering workstation and general
    personal use (some photo editing, LP restoraton, general
    internet browsing).  You simply just not enable any of the
    server services.  I find the combination to work quite well
    for my purposes.  I also have a 13" 2.7 GHz i7 Macbook Pro
    which is pretty much strictly for work.  As far as CPU
    power it is pretty much equivelent to your Mini.  For the most
    part I find the Mini does outperfom my MBP.  I heavily use
    Parallels and Windows7 virtual machines, so the more cores
    the better.
    So, If you do a lot of CPU intensive stuff that is multithreaded,
    the Server may help.  If it is graphics intensive and your software
    heavily leaverages the GPU, you may actually take a hit on
    performance.

  • Mac Mini Server freezes hard, too hot?

    Hi,
    Our Mac Mini Server (half a year old) with the newest system crashes hard now and then.
    It could run for up to three weeks occasionally but now in the summer it could sometimes only run for minutes until it hangs hard with frozen mouse and clock.
    I have found no other way than resetting by the power switch.
    According to the technical specification it should handle up to 35°C environment. (Right now we have 28°C in the room here.)
    It seemed to help a bit by installing smcFanControl and increase the fan speed.
    It will crash even without any work being done on it. No special applications started. No network traffic.
    If the exhaust temp is above about 32 to 34° the problems seem to worsening. Now it is 37°C despite full fan speed (5500 rpm) and it crashed after minutes.
    Sometimes it will even hang during the boot process.
    Have anybody else heard about such problems?

    Hi MalcomKay,
    I had to open a service ticket as Jiri suggested. The technician was pretty sure the crashes were caused by a defective Airport board and exchanged that (despite I doubted that and never used Airport for the server).
    I came back home (2x2x120 km of travel) and started the Mac Mini Server up. I booted and run the AppleServerDiagnostics.app test from an USB. It lasted 15 minutes (until it was warmed up) and then crashed so hard it was not counted by the test. It just froze hard. It crashed  when running the memory test. It always crashed before finish when running that test!
    I returned the server to the Apple Service (another 480 km of travel). This time they exchanged the whole motherboard. They tested it running intense traffic and operations for one full week without a freeze. So it was a faulty mother board!
    Now it has been running like a charm for months.
    This is not the first temperature problem affected board Apple has delivered to me.
    Good luck! /Johan
    Tips: Prepare an USB stick you can boot from. It is so frustrating to have a computer without a dedicated DVD where you can boot from and run the hardware tests.

  • Mac mini server: Hardware test error on Hard Drive

    Mac mini server: Hardware test error on Hard Drive
    'checking for slow read failures': ERROR - Target device access failure - Test failed.
    CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
    Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
    Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
    This is our trauma history:
    - time machine got increasingly slower in writing a backup
    - we quit the backup
    - we switched off the mac mini (on power button)
    - we switched on the mac mini
    - we stopped time machine to the rules
    - we shut down mac mini via command
    - we booted the mac mini in save mode
    - we see a loading bar
    - no progress after 10th of loading bar
    - switched off (power button)
    - when we now switch on the loading bar below the apple-logo is all we see + the little wheel
    - we started with cmd+alt+p+r pressed
    - mac mini restarted but showed the loading bar scenario without progress again
    - we started with 'd' pressed and did the hardware test (see above)
    - we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
    ANY IDEAS?
    IS IT A SOFTWARE- OR HARDWARE ERROR?
    THX IN ADVANCE!

    BDAqua wrote:
    I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
    I'd get Temprature Monitor & see what temps they're running.
    Is Temperature Monitor an app or a device?  If it's a temperature problem then that is essentially a design problem.  Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers.  I think it would be foolish to waste any more money on these minis for my business hosting.

  • I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
    Also Time Machine does not back up a boot camp partition.

  • Disk Erase Failed. Disk cannot be dismounted on Mac Mini Server

    Ok, this is a bit crazy for me anyway. I have a Mac Mini Server running Snow. My Server HD failed but fortunately my Mac HD was being used as an image backup and I can boot from it fine and runs perfect. The bad disk was not showing in Disk Utility at all. So I bought a new one and replaced it.
    Now Disk Utility sees it but if I try to format it or partition it, I get the message the it cannot be dismounted. I tried re-setting NVRam (Optio+CMD+P+R) but n luck.
    I have my original Snow DVD but I have no external DVD. I have a MacBook Pro Mountain Lion.
    How do I erase my new disk so I can copy everything back?
    Any help is appreciate it.

    Although thats an excellent suggestion but in the end I attached an old usb backup drive and restarted and held down the Option key to select it to boot. Then it went into Disk Utility, and I reimaged the 2nd drive to the new drive.  After the reimage I restarted and held down the Option key to allow me to select the first drive.
    The only issue I had was to rename my boot drive back to Server HD, which I did by using Finder and one more restart.
    I guess the rule is you cannot unmount the boot original boot drive unless you boot from an external drive.
    All is good now and thank you.

  • I want to downgrade my 2011 mac mini server to mac os x, i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-

    i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-

    bpruse,  I may be completely off-track for your issue, but I had a similar situation where I wanted to downgrade a Mac Pro from Server to plain OS X and it would not boot from the OS X install disk.
    I was attempting to use a full-install OS X.6.x disc with an earlier SL version than that which originally came installed on the Mac Pro.  After two or three hours of fiddling, I figured it out and used the discs that came with the system.
    However, I don't know how that would work in your case if this is the mini server-version.  I'm sure the disks would only have Server on them.  Worse-case scenario, find out which X.6.x the OEM disc is installing and get an OS X disc with a new installer.
    HTH.
    lnail

  • Dual disk Mac mini server - disk issue Disk Utility can't repair

    ML Server.
    There are two disks: Server OS HD and Server Mac HD. The Server OS HD only contains the OS and the Apple software update catalog. The Users folder is on the Server Mac HD. When the server is started / running, I go to the Disk utility > verify the Server Mac HD and I am told the Journal needs to be replayed but the volume is read only (it can't be!) and some other errors with regards to headers and bitmaps. DU then stops verifying the disk. I start the Mac mini / Server into recovery mode, try to verify the Server Mac HD. There are no problems - the "disk appears to be okay". I did this several times to same effect! How the heck do I repair the disk?

    I see what you mean about live verification.
    But didn't realize that the common sensical approach of separating the OS data from non-OS (user) data was an unusual config. Figured, it couldn't have any downside to it or atleast the least drawbacks.... had considered striping etc. but coulnd't see THAT much of a benefit in striping given my particular use / scenario. I have the system backed up to an external Time Machine drive (and will be doing an offsite / online backup of mostly user folders in the near future).
    It would be interesting to see the results of fsck check though, like John said.
    Anyway this whole thing was initiated because one of the users was getting an error of iTunes library being on a read only volume or on a locked volume. After repairing the Mac HD through Disk Utility in recovery mode (evethough no errors were found, I simply repaired it), that issue seemed to have resolved. So eventhough DU reported no errors, there must have been some small error - atleast it seems that way!
    Thanks to both for the help!

  • Mac Mini Server (Announced October 20, 2009) - Does it do RAID1?

    Apple announced the Mac Mini Server today for $999. It comes with two SATA hard drives, but there is no mention of RAID1. Does it do RAID1? This would be a good enough reason to get it. This could be a perfect media device - iTunes server, streaming video to TV via DVI/USB-to-HDMI adapter or DVI/optical-digital-audio_out-to-HDMI adapter, Time Machine backups, and file storage with RAID1. Without RAID1, this is just a mini sans the DVD drive.

    Dunstan Cooke wrote:
    I'm interested in a RAID 1 configuration to use as a file server in our office. 500 gb will be plenty of space for us, and I will couple this with an external 1 TB drive to use as a Time Machine backup.
    Given that presumably the OS will come preinstalled on one of the drives, how do you then create the mirror of this? If I reinstall the OS from an external device, does the installation provide the option to create the RAID 1 array to install to?
    When you boot from the Mac OS X install DVD (included with the Mac mini) you have the option to run Disk Utility to format/erase/partition or configure Software RAID. You can then once you have created your RAID configuration proceed with the installation in to that volume.
    Note: The Disk Utility program (the GUI version) does not let you partition a RAID drive, so if you have the two 500GB drives, you can only have a single 500GB volume (RAID1) or a single 1TB volume (RAID0). It is possible (but not recommended by Apple) to create two or more RAID mirrored partitions on a pair of drives via the command line. To do this in this case, would involve booting from an external drive which has Mac OS X installed on it, then you can run the Terminal to access the diskutil command line tool.

  • Help! Can't install SSD in my new Mac Mini Server (2012)

    Previously I've purcahsed Mac Mini servers and removed one of the two drives, replacing it with an OWC SSD. The hardware change was not hard to do and resulted in incredibly good computers for my employees to use which allowed us to retire several old, slow and abandoned-by-Apple Mac Pros. There were no issues with reformatting the computers after they had SSDs put in.
    Today I took delivery of a new Mac Mini server, and started to do the same thing, removing the top HDD and sliding in my SSD, since I have many of them around. Unfortunately, the OS would NOT let me format the disks separately or remove the RAID. The volumes (the original 1 TB that was inside and my 480GB SSD) were both colored red when I booted into Internet Restore mode and ran Disk Util, something I've never seen before, and all it would do was say "there was a problem with your disk, would you like to revert it to a working state?" which in this case means Disk Util forcing my drives back into a RAID whether I want them that way or not. (At one point it fused my SSD and the 1TB drive into a single logical drive that had the correct size but didn't show separate sections, and couldn't be de-RAIDED at all, even when I connected to another computer with the Mac Mini in Firewire target mode.)
    I gave up and put a 240 SSD in the lower bay, resulting in a 760GB RAID of two mismatched SSD sizes, which isn't what I wanted but I guess it will do. So far it seems to be working.
    My question is, why in the heck is Apple forcing me to run my computers as a RAID and/or not letting me break the system into one hard drive and one RAID, which is what I want? (Having the backup disk right inside the computer is very handy.)  Is this some feature to keep us from "making our own" Fusion drives? If Apple is deciding we can't hack or do anything interesting with Mac Minis, this will the last one I purchase, and I'm sure there will be others who do the same.
    Since replacing one HDD with an SDD is likely to be the most popular mode imaginable for Mac Minis, can anyone tell me if they got a similar setup to work, and if so what did you do? Can you post the steps here for others who will be in this situation?

    I'm not sure how or what is different between the Standard 2012 Mac Mini and the 2012 Server...? However it looks like your Server also uses Fusion like or similar to the regular Mac Mini's.
    "The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive."
    Have a look at > Mac mini (Late 2012) and iMac (Late 2012): About Fusion Drive
    and > Special Note for Adding an SSD to a 2012 Mac mini. | Other World Computing Blog

  • RAID on Mac mini Server (2011 i7)

    I just purchased a new Mac mini Server today (the base configuration 2011 Quad Core i7 with 4GB RAM and 2x 500GB 7200RPM magnetic hard disks) and wanted to share what I've learned about setting up RAID on the system.
    First, as you may have heard, the Mac mini Server does not include any installation/reinstallation media (I was hoping for a USB reinstall key, but it seems that the new systems don't include these or optical discs; last year's Mac mini Server included handy reinstall DVDs even though the system didn't have an optical drive).  Out of the box, the new Mac mini Server has Mac OS X Lion, the iLife suite, and the Mac OS X Lion Server tools pre-installed on one of the two 500GB internal drives; the other disk is formatted as a separate, second drive.
    If this is the configuration you're looking for, you're good to go right out of the box.  As an aside, this shipping configuration is ideal for using the second disk as a Time Machine drive.  I would argue that Time Machine would be a better use of the second volume than a RAID 1 configuration, as Time Machine provides versioned backups and you don't incur the write performance penalty RAID 1 requires every time data is saved to the disk.  I would further caution that, while an internal Time Machine disk is a convenient safety measure, any critical data should be backed up outside of the system as well.
    Now for those like me who were intrigued by the opportunity to mate the Quad Core i7 with a RAID 0/striped configuration for a performance boost (or if you want to use RAID 1), a RAID configuration is possible, but it there are a few caveats.
    First, Apple has two recovery options for the new Macs: a small hidden recovery partition on the boot drive and their Internet Recovery system.  While it's possible to boot other systems from a Lion installation DVD extracted from the App Store Lion installer, such bootable optical discs will not boot the Mac mini Server at this time (this may change if Apple modifies the App Store Lion installer).  Therefore, as of right now, the recovery partition or the Internet Recovery system are the best options for installing/reinstalling on a RAID set.
    Second, if you boot the system using Command+R to access the recovery partition, you can wipe the two drives and create a RAID set, but this process will remove the recovery partition and is incompatible with FileVault encryption (a warning to this effect comes up when you try to start an install/reinstalll on a RAID set, but at that point, you've likely already erased the recovery partition in Disk Utility).  If the system boots after the recovery partition is deleted, the only install/reinstall option is Apple's Internet Recovery.
    Third, as might be expected depending upon your internet bandwidth, the Internet Recovery system can take a while to boot the recovery tools (10-15 minutes to boot on a standard cable modem connection) and to reinstall the OS (50+ minutes on a standard cable modem connection).  Internet Recovery currently reinstalls only Mac OS X Lion and the Server tools on the mini Server; there's no option to install iLife during the OS install (Apple could always change this by updating their servers, and there is a Customize button on the installer, but it is greyed out and cannot be clicked at the present).
    Fourth, once the OS is reinstalled, it's possible to reinstall the iLife applications by launching the App Store from within Mac OS and selecting Purchased.  The store will indicate that the system is eligible to download the iLife apps and you can do so by agreeing to upload system-identifying information to Apple and signing in with your Apple ID.
    I hope all this helps.  Here's a more concise step-by-step of how to set up the system with RAID:
    THINGS YOU NEED
    A fast Internet connection for the mini
    Patience
    Hold Command+R on the keyboard at start up to boot from the system's recovery partition (if the recovery partition has been deleted, the system should start from Apple's Internet Recovery system; you may need to connect to WiFi if wired ethernet isn't available)
    Once you get into the recovery utility, select Disk Utility and for each of the two hard drives:
    highlight the drive
    select the Partition tab
    select 1 Partition from the Partition Layout pulldown menu
    select Free Space from the Format pulldown menu
    click Apply
    After you've wiped both of the drives, highlight one of the disks and click the RAID tab, then create a RAID set (striped or mirrored, as you prefer)
    Quit Disk Utility and from the main recovery utility menu select Reinstall Lion (from this point on, if you have any trouble, you can restart the mini from the Internet Recovery system and return to this point, but the recovery partition will be gone as long as you keep the RAID set)
    After you install and configure Mac OS X Lion Server (which can take well over an hour to download and install), you should be able to reinstall the iLife applications by launching the App Store App and selecting Purchased, then logging in with your Apple ID and agreeing to send your system info to Apple to download the iLife Applications
    If you're using the mini as a production server, I highly suggest setting up some local, external recovery tool, as you don't want to have system downtime protracted by having to wait for an Internet Recovery boot/reinstall.  I would also beg Apple to consider this sort of scenario and to provide more supported methods for recovering and reinstalling from local media.
    Best of luck to you all.

    I found the basic principle on another forum thanks to a guy called 'e-whizz' and this what I did to make RAID 1 work on a mac mini server with LION server.
    You can easily configure the second drive on a mac mini server for a Mirrored RAID 1 set with Lion Server without either reinstalling or erasing your existing setup.
    The initial setup process takes about 30 minutes, though the rebuilding of the mirror disk will take several hours, depending on the amount of data you have on the drive. It took around 3 hours on a new mac mini server with lion server installed, nothing else configured.
    Before you start, please ensure you have a current backup of the server. Getting the following commands wrong can render you server unusable.
    What you need to use is the command line version of Disk Utility, diskutil.
    Before you start, clone the hard drive. You can use SuperDuper (or similar, I have used SuperDuper) with copying all files onto a USB memory stick. If Lion is freshly installed, 8Gb will do. SuperDuper will create a bootable copy on the USB.
    Boot the mac mini from the external USB. To do that, reboot and hold down the option key while restarting. You will see a window, select the USB drive to boot from.
    Launch the terminal and type the following command:
    diskutil list
    This gives you a list of all the drives and partitions your system knows about.
    You need to find the Server HD partition (the first disk) and the HD2 partitions (the second disk). These are the two main ~500GB drives. You will be using the disk IDENTIFIERs when issuing the diskutil commands. For a stock standard Mac Mini Server, the commands below are correct, but if you have previously changed the volume names, or repartitioned at any stage the disk identifiers and volume names may differ.
    First enable RAID mirroring on existing Server HD volume. This will create a single disk, unpaired mirror, without affecting your data.
    Using this syntax:
    diskutil appleRAID enable mirror disktomirror
    where disktomirror is your disk identifier for Server HD
    On my mac mini server, Server HD was disk0s2, so I used this command:
    diskutil appleRAID enable mirror disk0s2
    You now need to run diskutil list again to see the disk identifier for the new RAID volume. The new RAID volume will be listed as disk# on its own at the bottom of the list.
    On my mac mini server this was disk3 (disk 2 was the USB I booted from, disk 0 the first disk and disk 1 the second disk)
    Next add the disk HD2 to the Server HD raid mirror volume (on my mac, as I said before, this is disk3) as a new member.
    This step will erase disk HD2 and begin an auto repair of the Server HD.
    Using this syntax:
    diskutil appleRAID add member newdisk raidvolume
    replacing newdisk and raidvolume with your particular disk identifiers
    On my server this was:
    diskutil appleRAID add member disk1s2 disk3
    To follow the progress of rebuilding the mirror set, type
    diskutil list
    It will show you the progress in % of the rebuilding under status
    Once finished, reboot and your RAID 1 is up and running and you have also a working backup on your USB (coz' that's where you booted from ;-)
    After reboot you can check the status of your RAID with
    diskutil appleRAID list
    Both drives should show ONLINE under status, interestingly, the device node for the RAID changed on my mac mini server from disk3 to disk2
    That's it

Maybe you are looking for