2008r2 stuck on welcome for an hour after restart

Windows 2008 r2 server (HP DL380p G8) after a restarts takes almost an hour to login.
                              This server used to not have this problem for about 8 months, but for the past 4 months
it has had it and I don't know why. After the restart I login and then have the words Welcome and a spinning hour glass. The words Welcome stay for almost an hour until I finally get to the desktop. During this time the server will reply
to pings. I don’t have this issue when restarting in safe mode with networking. I do have this issue if clean boot (msconfig and disable all non-MS services and disable all in Startup tab).
                              This only happens after a restart and regardless of the way connecting (console, rdp,
or ilo). If I simply log off and then back on there is no delay. There is no delay in safe mode with networking either.
                              Extra info....the NIC is HP Ethernet 1 Gb 4-port 331FL and the driver is provided
by HP 16.6.04 but the driver details states provider Broadcom 16.0.0.17.

Hi,
According to your description, system normal reboot in safe mode with internet, but the problem occurred in clean boot. I suggest you to check the drives (except the drivers used for mouse, keyboard, mass storage, networking) and make sure that they are
update to recent version.
Besides, could you think back if there is any change about setting, installation or other before this problem happened? if there is, try to undo the change. Have you check the event viewer, and check to see if any related record about this?
Best Regards,
Eve Wang

Similar Messages

Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

Oh thank you. Only thing is I have no backup, so i'd prefer to wait if there is a 24 hour lock out... Someone told me they thought there was, and I can't find anything on google to tell me how many attempts you get and how long you get locked out for each time. A friend made me a new passcode when under the influence and now after thinking about it remembers what he changed it to

Spinning Beach ball for 1 hour after Lion X installation, pls help

I have the Spinning Beach ball for 1 hour after Lion X installation, pls help
How long is it going to take?
Using Mac Book Pro corei5 with all previous updates.
Thanks

This happened to me too.
I bought Lion and let it download and install.
I had to leave my computer while the installer was running and when I came back a few hours later it was disoplaying the mac equivalent of a blue sceen: "You need to restart your computer. Hold...".
I restarted and I get to the login screen, but as soon as I start typing my password I get the beach ball and then tha fans start working like crazy.
I upgraded from snow leopard and my home account is encrypted.
What do I do?

Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
http://www.apple.com/batteries/iphone.html

TS2771 my ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, became a dark screen, what can I do? I love this ipod very much as it's a present from my

My ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, it showed fully charge, but after I pressed, it became a dark screen, but it shows a dark apple everytime I connect the Mac, what can I do? I will try my best to save it, I love this ipod very much as it's a present from my dear.

After drying for a month and it's still not working, it's almost certainly suffered hardware damage and will need to be replaced. You can learn what Apple will charge to replace it here:
http://www.apple.com/support/ipod/service/faq/
BTW, you posted originally in the iPod touch forum. It's best if you post in the forum specifically for your product; you'll get the most applicable responses that way.
Regards.

HT201210 My Ipad was downloading the new IOS6 across WiFi and it froze half way through the process. The progress bar has been stuck at 50% for 2 hours now I cant turn it off or reset it any ideas

My Ipad was downloading the new IOS6 across WiFi and it froze half way through the process. The progress bar has been stuck at 50% for 2 hours now I cant turn it off or reset it any ideas

It solved the problem with my iPod. Had the same issue as above since yesterday. Thought my iPod broke.
This helps. I've got back my iPod. So happy...................

Is submitting to iTunes down? App has been stuck in "processing" for 48 hours now.

Processing stuck for 48 hours. Anyone else having difficulties?

Hello, Shimmeringbanks.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If experiencing the issue with iTunes on the computer, quit iTunes and restart the computer.
Regards,
Jason H

I unplugged my iPod Classic without ejecting it first. It played for many hours after this but then it just stopped working and it has a blackened screen that seems to say paused. Wondering if there is a way to get it to work again.

I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.

Hey hughborg25,
I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
I would go through all the steps listed there, and the issue should be resolved by the end.
Live long and prosper,
David

Satellite E45t won't start for few hours after shut down

I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble.
Please help.

Hello,
I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly" and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle.
This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2. I also have disabled rapid start, etc after the problem began.
I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
Thanks!!

HT1848 I am trying to sync my iphone for the first time, it has been stuck on calendar for two hours, should i unplug and try again later??

I am trying to sync my iphone with my computer for the first time. It has been stuck on calendar for couple of hours. Should I unplug it and try again later??

Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591

MSI GE70 laptop stuck on update for 3 hours already.

My laptop has been updating 1 out of 3 update for over 3 hours. Any help?
It tells me "installing update 1 of 3…" with no percentage

Dear Customer, Welcome to HP Support Forum and we are glad to assist you. It looks like you are having lot of difficulties to get to the Windows Desktop as its not respondingWe will surely assist you with this. According to the message you have posted I suspect this could be because of the recent changes made if any. I would kindly request with you to perform the below shown steps to resolve the issue:Step 01. Turn OFF the PCStep 02. Power ON the PC and keep tapping F8 KeyStep 03. Select "Safe mode" from the Advance Boot Option listNote: Wait till you get to the Windows DesktopStep 05. Please remove unwanted startup items and uninstall unwanted applicationsStep 06. Please reboot/restart the PC the normal way Note: Incase if these steps doesn't work you can continue troubleshooting the issue again Step 01. Turn OFF the PCStep 02. Power ON the PC and keep tapping F8 KeyStep 03. Select "Last known good configuration" from the Advance Boot Option listNote: Wait till you get to the Windows DesktopStep 04. Please remove unwanted startup items and uninstall unwanted applicationsStep 05. Please reboot/restart the PC the normal way **Click the KUDOS star on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KI work on behalf of HP

Blank Screen For Several Hours After Box Trying To...

Just an FYI, that my BT Vision+ box started to upgrade itself on Thursday the 19th (today is Sat the 21st). After several automatic reboots, and update / dowloading software screens, it would always just reach a blank screen and get no futher.
Occasionally, along the way there would be a VDR016 error code (can't find a link to that error code), the screen told me it's a network error. The error would always right itself by "successfully downloading and installing the software". Anyway, it would always lead (eventually) to a blank screen.
Over the next 36 hours, I followed the first 2 solutions in the following thread a couple of times: BT Vision Box Reset Process. to no avail. So I ended up on solution 3, the factory reset.
Thankfully, it worked, but as expected, all my recordings have been wiped (including programs for my young children no longer available on catch-up).
I really think that because these boxes are more flaky than Microsoft Windows (sudden reboots every now and again and now this), there should be some way of backing up recordings, either online on BT servers, or "offline", e.g. on a local network.
Btw, 30 mins after completing full reset, the EPG still only showed the next hours TV. It took a bit of time for the EPG data to download, but it did.

Try closing unused applications that you have running in the background.
From the home screen, touch the applications tab (located on the bottom of the screen).
Touch Settings.
Touch Applications.
Touch Running services.
Touch the desired service.
Touch Stop.
Try deleting old messages that you no longer need, to clear phone memory.
If you are using a task manager or application manager, try setting it to high to close applications.
Dial *228 send and option 1.

Weird problem XP freezes after system was off for several hours after upgrading to X

Mobo: Gigabyte GA-M55plus-S3G, Athlon 64 X2 3800 AM2, GB PC 3200, XFX Geforce 7600GT, 80 GB system dri've Barracuda 7200, Sata Raid 2x 300 GB Maxtor DiamondMax0, PSU Seasonic 600W, Ralink Wireless PCI card, Sony floppy, Pioneer DVR
After the installation of the new soundcard I could reboot initially but not reboot when I used the PC a few hours/next day later. The blue XP indicator bar would freeze. Tried several re-installs. Then I re-installed everything including XP from the beginning. When re-installing the graphics card driver (old and latest version) system would hang with a blinking cursor.
I also updated BIOS successfully to F6. Full re-installation -everything seemed to work. Re-booted several times- OK. Booted a few hours later- XP freezes when blue indicator bar has ben running for a few seconds.
I have now the latest drivers for both soundcard, graphics card, BIOS and latest DirectX installed. I cannot understand why the system would reboot immediately after installation but freeze a few hours later. Is this some kind of hardware problem ?
my friend and I using same components and we both have same problem!!
REMOVING the X-Fi card solves the problem

Ok, tried these installations:?Clean XP Install --> Mainboard Drivers --> Video Drivers --> Audio DriversClean XP Install --> Video Drivers --> Mainboard Drivers --> Audio DriversClean XP Install --> Audio Drivers --> Mainboard Drivers --> Video Drivers?I continued with several other reinstalls. After each one, Windows had NO PROBLEM rebooting and loading into the XP desktop. IF you turned off the PC, though, and back on again, Windows would lock up at the loading screen with the scrolling blue bar. Likewise, I still encountered the blinking cursor error when installing the video drivers AFTER the audio drivers but not vice versa. Either way, when I turned off the PC for the 'ultimate' deciding-test, X-Fi would not allow Windows to post. I pulled the X-Fi card out and voila, Windows loaded with no problems whatsoever. Of course I had no sound because they weren't the drivers for an SB Li've! 24-bit, you get the idea. My system is:?AMD 4600+ AM2GA-M55Plus-S3G (Gigabyte mainboard, rev .)2GB Corsair XMSPro Series DDR2-800 RAMeVGA 8800GTX PCI-e video cardMemorex DVDR+/-WWD 250GB SATAII HDSBLi've! 24-bit sound card?I was trying to upgrade to an X-Fi Fatalty Professional Gamer (without the I/O panel). I had no idea stupid NForce4 boards were incompatible with certain X-Fi products (and vice versa). Can anyone suggest some alterior sound cards that would work with mine and the second posters board? Or, recommend a suitable mainboard that is relati'vely 'new' and works flawlessly with the X-Fi series, so I don't run into a stupid issue like this again? I daresay, Creative, I've been a longtime supporter of your cards for YEARS, all the way back to 995 and THIS is unbelievable. One last question, has ANYONE tried the Fatalty series X-Fi on an actual Fatalty series mainboard?Message Edited by cookiemanx on 2-05-20062:08 AM

Anyone else's Order stuck in Memphis for last hours?

Hi,
My fedex tracking shows delivery on monday before Pm but it has not moved from initial picked up hub, Memphis. It shows in transit!!! I am in ND. I hope it make on monday, just wanted to know if anyone else is having same problems!

I don't think any are stuck in Memphis. I just think they suck at updating the info for you. Mine was there until last night, and it suddenly is in Pittsburgh this morning. No worries, you should have it tomorrow!

Time Machine stuck at "Looking for backup disk" after installing Windows 8 via Boot Camp

I've been backing up via Time Machine to an external USB drive and it's been working fine. I recenty installed Windows 8 via Boot Camp and now TM gets stuck forever at "Looking for backup disk...".
I've tried the following, to no avail:
Using "Select Disk" in TM preferences to re-select the disk
Deleting /Library/Preferences/com.apple.TimeMachine.plist
Running system maintenance via Onyx
Resetting PRAM
Formatting the drive and setting it up for TM backups again
The Boot Camp partition is on the same drive as OS X (on a 180GB Intel 330 series SSD). During the Windows installation I re-formatted the partition as NTFS.
If I start OS X in Safe Boot mode, TM backups work. In Safe Boot mode, the NTFS partition isn't loaded so I suspect it has something to do with this. Any ideas would be greatly appreciated.

I installed Paragon NTFS for Mac and it started working all of a sudden.

2008r2 stuck on welcome for an hour after restart

Similar Messages

Maybe you are looking for