2lis_02_scl and item counter(KZPOS)

Hi, I am not able to see the count for KZPOS in my ODS for the DS 2LIS_02_SCL. Did anybody use that for count? I am getting all zero values for the count.
Thankls,
Radha

After maintaining the 2lis_02_scl data source ( i.e after adding KZPOS to 2lis_02_scl ) did you delete set up tables and activate the data source and did initialization again? ( Tcode OLI3BW)
1) try to check in RSA3 . see if you're getting that field and values
2) Did you do a mapping for KZPOS and correspoding info object in transfer structure.
2) have you added the info object for KZPOS in you ODS.
check all these and let know

Similar Messages

Solution for invalid directory item count, startup disk corruption and regular crashes

Hi,
My late 2006 MacBook (10.6.8) has recently started crashing quite frequently. The screen becomes dark and a multi-language dialogue appears stating that the computer must be restarted with the power button. When this occurs any audio which was playing begins to repeat/skip and the computer goes into complete lockdown. This is now happening perhaps twice a day or more under moderate use.
This morning I ran 'Verify Disk' in Disk Utility and the process was stopped, stating that I had two 'Invalid directory item counts' and 'the volume Macintosh
HD was found to be corrupt'. Here is a screenshot of the Disk Utility window:
I have rebooted, run a software update and rerun the disk verification but to no avail. I also booted using CMD-S, advised by an older post in another forum which suggested using 'fsck -yf' which ran and stated that the disk had been repaired.
I bought the MacBook second hand from an Apple dealer but it didn't come with an install disc so I am unable to reboot and repair the disk like that.
My questions, therefore, are what does this mean for my computer in the future, will either of these issues cause me more trouble?
What can I do about it without the install disc
And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
Thanks in advance for any help you can offer!
Twitch

Not much you can do without an install disc which can be purchased from Apple Store > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
multi-language dialogue appears
That is referred to as a kernel panic. OS X: About kernel panics
Regardless of the kernel panics, you will still need the install disc to repair and reinstall OS X if necessary.
And are these issues directly related to the crashes? (I have been running the computer connected to an external drive and monitor - for watching movies)
Could be part of the problem.

How To Get Deleted Item Count and Associated Item Count And LastLogOn and LogOff Time For A Mailbox In Exchange Using EWS

Using Powershell cmdlet i get all the details..But i want to get these Details by using EWS Managed Api.Is It Possible to do???
Powershell Cmdlet,
Get-MailboxStatistics -Identity Username, Using this cmdlets all the details will get displayed.
DeletedItemCount:5 //Here how this count comes.In My OutlookWebApp the deleteditems folder contains 13 items in it..But the count shows only 5.
TotalDeletedItemSize:5.465 Kb//Even this value too does not match with DeletedItems Folder size in owa.
AssociatedItemCount:12
LastLogOnTime:11/11/11 12:43PM
LastLogOff Time:11/11/11 2:43PM
In EWS,
By Looping through all folders i can get the total item count and total item size.Even i can get deleteditems count .But that value does not match With the powershell value.Even the TotalDeletedItemSize
Doesnt match.
Using EWS Managed Api ,Looping through folders i can get ItemCount,TotalitemSize,(DeletedItems,TotalDeleteditemSize(These TwoValues Does not match with values comes from powershell))
Now how to get the Associated item count and lastlogoff and logon time using EWS managed Api.Is it Possible???
And even y the deleteditems count and size values varies between EWS and powershell.

What happens if you execute the below code?
Get-MailboxFolderStatistics [email protected] | where {$_.FolderPath -like "/Deleted Items"}
Refer this blog. You may get some dice
http://exchangepedia.com/blog/2008/09/configuring-deleted-item-retention.html
Regards Chen V [MCTS SharePoint 2010]

Dso updating item count to cube

Hello experts.
I am counting item in transformation from data source to DSO (key fields - order no and item no).
Result = 1`.
In DSO, count works fine.
Now, I am updating DSO to a summary cube.
What transformation routine I need to write, so that an item only count once and not aggregated when same item and order comes in multiple times.
Is this routine correct -
if source_fields-recordmode = 'R' or
source_fields-recordmode = ' ' .
result = '-1'.
else.
result =1.
endif.

Ramesh,
No need to write any code while mapping from DSO to CUBE.
Just map, counter(one-to-one) from DSO to CUBE.
Change DTP settings to from change log. Change log takes care of new, changed or canceled records.
Hope it Helps
Srini

Not able to create sub folder using SharePoint web service in large SharePoint document library (Item count view threshold limit)

We are trying to create folder & subfolder in a SharePoint document library using SharePoint default(dws) web service. Document library has unique permission as well as item level permission. It was working as expected. Once item count crosses
view threshold limit ( 5000) , create folder web method completes with an error and it creates a folder in SharePoint.
Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:dws="http://schemas.microsoft.com/sharepoint/soap/dws/">
   <soapenv:Header/>
   <soapenv:Body>
      <dws:CreateFolder>
         
         <dws:url>Shared Documents/VenTest02092015v1</dws:url>
      </dws:CreateFolder>
   </soapenv:Body>
</soapenv:Envelope>
Response:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <CreateFolderResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/dws/">
         <CreateFolderResult><Error ID="2">Failed</Error></CreateFolderResult>
      </CreateFolderResponse>
   </soap:Body>
</soap:Envelope>
While trying to create subfolder under the above created folder service throws an exception saying
FolderNotFound.
Though we are able to create subfolder from SharePoint UI successfully.
Request
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:dws="http://schemas.microsoft.com/sharepoint/soap/dws/">
   <soapenv:Header/>
   <soapenv:Body>
      <dws:CreateFolder>
         
         <dws:url>Shared Documents/VenTest02092015v1/REQ-1</dws:url>
      </dws:CreateFolder>
   </soapenv:Body>
</soapenv:Envelope>
Response:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <CreateFolderResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/dws/">
         <CreateFolderResult><Error ID="10">FolderNotFound</Error></CreateFolderResult>
      </CreateFolderResponse>
   </soap:Body>
</soap:Envelope>

Yes, you're probably hitting the 5000 list item threshold (
http://sharepoint.stackexchange.com/questions/105937/overcoming-5000-file-document-library-limits ). I assume you can do it via the UI because you're probably logged in as an admin in which case, out of memory, the threshold is 20.000 items. You can extend
this limit, but you probably shouldn't.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Urgent.. issue in MM loading: 2lis_02_scl and 2lis_02_itm

Hi Gurus,
I am getting a short dump when i am trying to load the data from datasources: 2lis_02_scl and 2lis_02_itm.
It is giving the error message : "
   "MESSAGE_TYPE_X" C
   "SAPLRSC2" or "LRSC2U01"
   "RSC2_QOUT_READ_DATA"
and even the repeat of delta has failed again.
Can ne body please help as this is business critical issue.
Thanks in advance,
Anurag Rathore

Hi
There is one other method where in youc an go to the Item and Schedule line tables ( EKET) and filter on created on and load those documents into BW.
However this is tedious process as you many have several documents to fill the setup tables
This is just another alternative..
Regards,
Srini

PS Elements 6 - Item Count

I have been using Photoshop Album 2 for a number of years and have just upgraded to PS Elements 6. I have approximately 29,000 photos stored. I am very happy with the upgrade and it bought all photos into PS Elements 6 nicely. In PS Album 2 there was an item count at the bottom of the screen that showed the number of photos I had stored, also when filtering it showed the number of photos that were available. My installation of PS Elements 6 does not have this but I have seen some screens shots on the Web that show this information, can somebody tell me how to enable this feature please.

I am currently trying to upgrade from Album Limited Edition 3.0 to Elements 6.0 and having no luck in transferring tagging and rating data. Importing the files works fine but no cataloguing data comes with them into Elements. I'm using the Get Files and Folders command, and then selecting files from the My Pictures folder on my hard disk, but Elements doesn't seem to recognise my Album tags as I don't get the expected prompt regarding which tags etc I wish to import. Did this all work fine when you carried out your upgrade and if so have you any advice?

Why is the item count in Photos for Mac significantly higher after upgrading from iPhoto?

Since upgrading to Photos for Mac from iPhoto, I've noticed the number of photos and videos in my library is higher than what I had before. Granted I imported some photos into the new app since then but taking that into account there's still a big discrepancy.
In iPhoto 9.6.1, the item count is 13,394 and I have since imported 95 new items into Photos for Mac. The total then should be 13,489 but Photos for Mac lists the item count at 13,626. That's a difference of 137 items.
Even taking into consideration that Photos for Mac might be including the 32 photos and videos that were in iPhoto's Trash (now Recently Deleted) folder, it still wouldn't account for 105 mystery items.
Does anyone have any insight into this difference in the number of items?

Since upgrading to Photos for Mac from iPhoto, I've noticed the number of photos and videos in my library is higher than what I had before. Granted I imported some photos into the new app since then but taking that into account there's still a big discrepancy.
In iPhoto 9.6.1, the item count is 13,394 and I have since imported 95 new items into Photos for Mac. The total then should be 13,489 but Photos for Mac lists the item count at 13,626. That's a difference of 137 items.
Even taking into consideration that Photos for Mac might be including the 32 photos and videos that were in iPhoto's Trash (now Recently Deleted) folder, it still wouldn't account for 105 mystery items.
Does anyone have any insight into this difference in the number of items?

Item count errors in Time Machine folder

Whenever I run Disk Warrior after Time Machine subject drive is full of errors like "item count" and "custom icon" errors in the Backups.backupdb folder on subject drive. Why is this happening?
jmf

Yes I have run Disk Warrior on the object internal drives, and they do not have any errors after successive checks with Disk Warrior. The errors are only on the external drive that contains the backup folder. Another consistent problem, is Disk Warrior wants to bless the "System Folder" on the backup drive which is an external data drive with no operating system installed.
jmf

Header and item data in po

Hi,
What are all the tables from which the data would be taken to display in header and item data in process PO ? From where these data would be taken ?
Thanks alot.
Regards, Sunayana N

ADR10 Printer (Business Address Services)
ADR11 SSF (Business Address Services)
ADR12 FTP and URL (Business Address Services)
ADR13 Pager (Business Address Services)
ADR2 Telephone Numbers (Business Address Services)
ADR3 Fax Numbers (Business Address Services)
ADR4 Teletex Numbers (Business Address Services)
ADR5 Telex Numbers (Business Address Services)
ADR6 E-Mail Addresses (Business Address Services)
ADR7 Remote Mail Addresses (SAP - SAP - Communication; BAS)
ADR8 X.400 Numbers (Business Address Services)
ADR9 RFC Destinations (Business Address Services)
ADRCOMC Comm. Data Serial Number Counter (Business Address Services)
ADRCT Address Texts (Business Address Services)
ADRG Assignment of Addresses to Other Address Groups (BAS)
ADRGP Assignment of Persons to Further Person Groups (BAS)
ADRT Communication Data Text (Business Address Services)
ADRU Table for Communication Usages
ADRV Address Where-Used List (Business Address Services)
ADRVP Person Where-Used List (Business Address Services)
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDCON Purchase Order Item Confirmation
BBP_PDHAD_V Business Transaction Versions
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDIAD_V Business transaction item
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDLINK_V Transaction - Set - Link
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
BBP_PDTOL Tolerances
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_HBusiness Transaction
CRMD_ORDERADM_IBusiness Transaction Item
CRMD_PARTNER Partners
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
STXB SAPscript: Texts in non-SAPscript format
STXH STXD SAPscript text file header
STXL STXD SAPscript text file lines
TOA01 Link table 1
TOA02 Link table 2
TOA03 Link table 3
TOAHR Container table for HR administration level
TCURR- Exchange table

How to print Header page from Tray1 paper and Items page from Tray2 paper

Hi,
I have requirement to print the Header data from Tray1 paper and Item details data from Tray2 paper,it should autometically pick paper from Tray1&Tray2...?
Thanks in advance....

Hi,
You can do this by calling the url of the page with the form. You can then use p_arg_names and p_arg_values to pass parameters. In the called form you can get the value from p_arg_names and p_arg_values and assign it to the form field.
You can call this code in the success procedure of the calling form.
declare
v_id number;
blk varchar2(10):='DEFAULT';
v_url varchar2(2000);
Begin
v_id:=p_session.get_value_as_number (p_block_name=>blk,p_attribute_name=>'A_ID');
v_url := <page_url>;
if v_id > 0 then
call(v_url||'&p_arg_names=id&p_arg_values='||v_id);
end if;
End;
In the called form in "Before displaying form" plsql section write this code.
for i in 1..p_arg_names.count loop
if p_arg_names(i) = 'id' then
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_ID',
p_value => p_arg_values(i)
end if;
end loop;
This code picks up the value from p_arg_values and assigns it to the form field.
Hope that helps.
Thanks,
Sharmila

DMEE - Structure paid line item counter

Dear Friends,
We have created DMEE structure as per bank format.Bank will print payment advice also by using this txt file.
In payment advice part there are 3 line start from "H" which is header part of payment advice and will count like 1, 2 ,3
below that details part will start with same sequence but "D" will be added and sequence will continue with 4,5,6,7.....
But we are stuck in details part "D". How to continue same sequence which is coming from "H" as per above image?
Thanks
Sampat

Dear Christoph,
I have generated following text file using DME tree
Now my further requirement is to add additional rows into it as shown below,
before display details of paid items I want to show three rows as static rows for every payment as highlighted in yellow.
Thanks
Sampat

Opportunity Header and Item tables

I am looking at the keys on the Opportunity Header and Item table which are GUIDs.
I have the following scenario.
1. My source table contains the Opportunity Header GUID
2. My target table requires all the fields from the source table and some Opportunity Header and Item attributes
I can write WHERE clause logic for my Opportunity Header attributes
For my Opportunity item attributes I was going to introduce a count - this is not possible with Item GUID unless a part of the GUID is incremental for each line by 1 or there is a maintained field otherwise as part of the Opportunity Item which is a number representation for each line.
Can someone advise
Thanks

Hi,
In the CRMD_ORDERADM_H table you have the Opportunity GUID as well as the Object ID which is the opportunity id. In the CRMD_ORDERADM_I table, you have the GUID and also the NUMBER_INT which is the item number. See if you can use the item number.
Thanks.

Problem when filling Node and Item tables for the metho add_nodes_and_items

Hi Experts,
I am facing problem when filling Node and Item internal tables for the method add_nodes_and_items.
as i have written the below logic:
LOOP AT gt_partner INTO wa_partner.
    CLEAR lvs_tc_root.
    l_key = l_key + 1.
    lvs_tc_root-node_key   = l_key. "wa_partner-sndprn.
* lvs_tc_root-relatkey = lvf_tc_node_key.
* lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-isfolder   = 'X'.
    lvs_tc_root-n_image    = icon_folder.
    lvs_tc_root-exp_image = icon_folder.
    lvs_tc_root-expander   = 'X'.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'A'. "Successfull
    lvs_tc_root-relatkey   = l_key.
    lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_green_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'B'. "Errors
    lvs_tc_root-relatkey   = l_key    .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_red_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key = 'C'. "Deleted
    lvs_tc_root-relatkey = l_key .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden    = ' '.
    lvs_tc_root-disabled = ' '.
    lvs_tc_root-n_image   = icon_yellow_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
*   LOOP AT gt_partner_item INTO wa_partner_item WHERE sndprn = wa_partner-sndprn
    LOOP AT gt_partner INTO wa_partner_item WHERE sndprn = wa_partner-sndprn.
      CLEAR lvs_item.
      lvs_item-node_key   = l_key.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = wa_partner-sndprn.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'A'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Successful'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'B'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Errors'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'C'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Deleted'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
    ENDLOOP.
ENDLOOP.
CALL METHOD go_tree->add_nodes_and_items
    EXPORTING
      node_table                     = gvt_tc_node_table
      item_table                     = gvt_tc_item_table
      item_table_structure_name      = 'MTREEITM'
    EXCEPTIONS
      failed                         = 1
      cntl_system_error              = 3
      error_in_tables                = 4
      dp_error                       = 5
      table_structure_name_not_found = 6.
If the internal table has more than 1 record getting dump...Runtime Errors         MESSAGE_TYPE_X
Plase let me know how to overcome the problem..
Thanks,
Rajasekhar
Edited by: RajasekharReddy Nevali on Nov 29, 2010 3:43 PM
Edited by: Neil Gardiner on Nov 30, 2010 12:41 PM

Hi ,
U can undestand the code and one more thing dynamically display record for automcally here i am using root nodes please look at that one Same requiremtn i done previously.
cLEAR item.
item-node_key = c_nodekey-root.    "partner1
item-item_name = c_column-column1.
item-class = cl_gui_column_tree=>item_class_text.
item-alignment = cl_gui_column_tree=>align_at_top.
item-font = cl_gui_column_tree=>item_font_prop.
item-text = 'APPLICATION'.
item-length = 30.
APPEND item TO item_table.
DATA:lv_name TYPE tv_itmname VALUE '1',
       lv_nkey TYPE i,
       lv_nkey2 TYPE i,
       lv_nkey_c TYPE string,
       lv_nkey_c2 TYPE string,
       lv_nkey_c3 TYPE string,
       lv_nkey_c4 TYPE string,
       LV_NKEY_C5 TYPE STRING,
       lv_itmkey TYPE i,
       lv_itmkey_c TYPE string,
       LV_INDEX TYPE I.
************************************************LOOP FOR APPLICATION*********
LOOP AT i_otypes INTO wa_otypes.
    read table it_appl into wa_appl with key appl = wa_otypes-applic." BINARY SEARCH.
          if sy-subrc = 0.
            lv_apdes = wa_appl-text1.
          endif.
    CLEAR:item,lv_nkey_c.
    lv_nkey_c = sy-tabix.
    LV_INDEX = SY-TABIX.
    CONDENSE lv_nkey_c.
    CONCATENATE 'N' lv_nkey_c INTO lv_nkey_c.
    node-node_key = lv_nkey_c.
    node-relatkey = c_nodekey-root.
    node-relatship = cl_gui_list_tree=>relat_last_child.
    node-isfolder = 'X'.
    APPEND node TO node_table.
    CLEAR item.
    item-node_key = lv_nkey_c.
    item-item_name = c_column-column1.
    item-class = cl_gui_column_tree=>item_class_text.
    item-font = cl_gui_column_tree=>item_font_prop.
    item-text = wa_otypes-APPLIC.
    item-length = 30.
    APPEND item TO item_table.
     CLEAR item.
      item-node_key = lv_nkey_c.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_apdes.
      item-length = 30.
      APPEND item TO item_table.
     v_acount = v_acount + 1.
     v_acount1 = v_acount1 + 1.
clear lv_apdes.
*****************************************LOOP FOR ARCHIV OBJECTS***************************
    loop at it_obj into wa_obj where applic = wa_otypes-applic.
      CLEAR:item,lv_nkey_c2.
      lv_nkey_c2 = SY-TABIX.
      CONDENSE lv_nkey_c2.
      CONCATENATE 'SN' lv_nkey_c2 INTO lv_nkey_c2.
      node-node_key = lv_nkey_c2.
      node-relatkey = lv_nkey_c.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-object.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-objtext.
      item-length = 30.
      APPEND item TO item_table.
****count all object for final displaying*******
     v_ocount1 = v_ocount1 + 1.
      LV_STR = LV_STR + 1.
     ENDLOOP.
*********************LOOP FOR ARCH OBJECT ALL PROGRAMS*******************************************
   LOOP AT IT_PRG INTO WA_PRG WHERE OBJECT = WA_OBJ-OBJECT.
****************1PRG**********************
IF wa_PRG-REORGA_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-reorga_prg BINARY SEARCH.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item,lv_nkey_c3.
      data : v_no type sy-tabix.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRIT'."wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRITE PROGRAM'."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
       clear lv_text.
************************SSSN NODE***********************
        CLEAR:item,lv_nkey_c4.
      data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
*******COUNT TYPE WRITE PROGRAMS****************
      V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
*endif.
*****************2PRG*****************
IF wa_PRG-RETRIE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-retrie_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'successful'."wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'sucessful PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
*********************************SSSN NODE*******************************
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
**********COUNT THE RELOADPR*******************
          V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
ENDIF.
****************3PRG**********************
IF wa_PRG-DELETE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-delete_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'DELETE'."wa_PRG-DELETE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'NAME OF DELETE PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      endloop.

Get particular item count in sharepoint list using designer Workflow

How to get specific item count in sharepoint list using designer Workflow 2013.
For Example
Title Count
x 1
y 1
x 2
x 3

HI Thiru,
Can you please elaborate your problem. Is that Title and count are your list columns you want to fetch the value of count column based on title?
If my interpretation in not wrong, then it's not possible in SPD with the case you have mentioned in your question as Title='x' is having 3 different entries and SPD activity will always return first matching item and ignore the rest with warning message.
Regards,
Brij K

2lis_02_scl and item counter(KZPOS)

Similar Messages

Maybe you are looking for