300 dpi in Lr on the images

Why is ACR still only 240 dpi my DSLR shoots at 300 dpi and my clients demand 300 dpi images so why is Adobe Camera raw still only 240 dpi and not able to read the dpi of the Raw files I have now, will this issue be fixed anytime soon
thank you

Your camera doesn't shoot any dpi, as dpi is a printer term, and meaningless without a physical print.
You can export with the dpi tag set to whatever you want (it's in the export dialog).

Similar Messages

  • Shrink the images ( .eps and 20 extensions)

    Hi All,
    I have a requirement in my project like, I have to shrink the images which are varies in size 100 KB to the 100 MB and files extensions are .jpg, .tif, .tiff and .eps and many more like 20 extensions
    Need to
    1) Shrink the images  with specific width 4 inch and height 4 to 5 inch @ 300 DPI
    2) re name the images in order with commonly  first name same for all the images
    3) save them only .jpg
    4) color format should be converted to CMYK only
    Please suggest me the tools to meet the above requirement, we are ready to buy the product which does support to above requirements.
    Thanks & Best Regards,
      Venugopala Narva
    GE Healthcare Consultant
    Vignette specialist
    EPresence -eCommerce Support Team
    [email protected]
    Mobile : 0091 88868 66338

    I doubt you truely want a CMYK JPG. Try opening one in Word.

  • How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?

    How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?
    I have been trying to convert images created in webex and transferred to illustrator into 300 dpi tifs. They download as ucf's when generated on white board. Or I have to upload files from other webex participants coming in at 72 dpi, converting them to something bigger in photoshop to paint in before taking them back into the webex session as a doc that then gets worked on further during the session. Later they go into illustrator for some more work with vectors. That's fine for the web but now a publisher wants them as 300 dpi tifs and I can only get things back & forth as 72 dpi pdf's. If I try to bump them up with a resample, they come out teensy weensy. What am I missing and is there any way to make them look good?

    What I need is to be able to transfer the images between formats without degradation of the resolution and find ways to sharpen what I have even if I can't increase pixels. If the original I'm delivered is a 96 dpi power point slide, for example, that's what I have to work with, I'm using Illustrator to compensate with vectors. But then I still need to get it back to a 300 dpi tiff to meet the specs.

  • Is the image quality in Debut good enough for client presentations?

    Yes. Debut provides high-fidelity renditions of Photoshop (PSD), Illustrator (AI) or InDesign (INDD) files. You can also open PDF, JPEG, PNG and GIF files directly in Debut. Additionally, you can get the highest fidelity view of your work by opting to view it at original size.
    Pinch to zoom in on images; Drag to pan; Double-tap to view at 100%:

    OK,  I have managed to get higher quality images from the PDF renderer. Here is what I have found:
    1) The PDF renderer in Reporting Services 2005 will size all images that it is given at 96 DPI no matter what DPI the image is when you pass it to the renderer. That means that a 300 DPI image or even a 600 DPI image will be sized in the PDF as if it is only 96 DPI. That means your high DPI image will render much larger than you expect.
    So you might expect a 300 DPI image that is 6.5 inches wide to render properly at 1950 pixels. Yet, the PDF renderer will size it as it were 96 DPI which would make the image 20.3 inches long!
    2) There is good news though. Despite sizing the images as if they were 96 DPI, the PDF renderer appears to render higher DPI images at a higher quality than 96 DPI. So despite the sizing being wrong, the image actually is rendering at a higher quality.
    This means that you should size the image to the proper number of inches based on 96 DPI calculations. Then you can use Bitmap.SetResolution to set your images to at least 300 DPI.  That should give you a higher quality image that is the proper number of pixels to fit properly in your report.
    I am able to do all of this sizing dynamically because I am using objects as my data sources, but I am sure there are VB functions you could use in the report itself to accomplish the same task.
    It is late, and I've been at this project all day long, so forgive me if I have explained anything poorly or gotten any concepts long. Yet, at this late hour, I believe this is what the renderer is doing.
    I hope this helps someone else in the future, or at least points them in the right direction.

  • 300 dpi pictures

    When I open my photographs in Fireworks, they open in 72 dpi.
    After I modify them, I need to save them at 300 dpi. (I do not have
    Photoshop which will of course open the photos in 300 dpi if
    asked.)
    1) Do I lose quality when converting/resampling the photos to
    300 dpi in Fireworks and then saving?
    2) I know of two ways of converting to 300 dpi. One, I go to
    the Modify -> Canvas -> Image size and change it to 300 dpi.
    Two, I can open a 300 dpi window, paste the present image, and when
    asked say resample.
    Is one of these methods better than the other?
    3) Is Photoshop better at obtaining and preserving a quality
    300 dpi photo. Or can I stay with Fireworks (a program of which I
    am very fond)?
    Thanks!

    1)As long as you do not resample the image, the only quality
    loss is
    from resaving the jpeg file. Unless you are planning to print
    the
    images, changing the dpi has no effect anyway, so you may not
    need to
    alter it.
    2)Either will do the job, but the first one is faster. Just
    don't
    resample the image.
    3) Again, the concept of dpi is only relevant when printing.
    Changing
    dpi does not change the image file quality in any way, so
    long as the
    file is not resampled. DPI does affect print quality and
    print
    (reproduction) size.
    HTH
    Jim Babbage - .:Community MX:. & .:Adobe Community
    Expert:.
    Extending Knowledge, Daily
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    news://forums.macromedia.com/macromedia.fireworks
    news://forums.macromedia.com/macromedia.dreamweaver
    TresTria wrote:
    > When I open my photographs in Fireworks, they open in 72
    dpi. After I modify
    > them, I need to save them at 300 dpi. (I do not have
    Photoshop which will of
    > course open the photos in 300 dpi if asked.)
    >
    > 1) Do I lose quality when converting/resampling the
    photos to 300 dpi in
    > Fireworks and then saving?
    >
    > 2) I know of two ways of converting to 300 dpi. One, I
    go to the Modify ->
    > Canvas -> Image size and change it to 300 dpi. Two, I
    can open a 300 dpi
    > window, paste the present image, and when asked say
    resample.
    >
    > Is one of these methods better than the other?
    >
    > 3) Is Photoshop better at obtaining and preserving a
    quality 300 dpi photo. Or
    > can I stay with Fireworks (a program of which I am very
    fond)?
    >
    > Thanks!
    >
    >
    >

  • Save 300 dpi jpegs

    I have a tiff file of a painting I scanned at 300 dpi. It's original image size when I open it is photoshop is 57.8 MB, 18" W by 12.477" H, Res 300. I need to resize it and send it as a 300 dpi jpeg. I have started in the image size dialogue box and just change the W to 11.25. That automatically changes the H to 7.798 and the res still says 300. The file size reduces to 22.6 MB. I click ok and then go to save as and choose jpeg. In the jpeg box I chose 12 Max and baseline standard and click ok. The saved file is reduced to 8.5 MB. When I open it in photoshop, it opens at 300 dpi when I look in the image size box. However, when I send it to someone else and they open it, the file is only 72 dpi. What am I missing to get the file to save at 11.25 inches, jpeg, but remain 300 dpi?
    Thank you.
    Sheilaartist

    I have a tiff file of a painting I scanned at 300 dpi. It's original image size when I open it is photoshop is 57.8 MB, 18" W by 12.477" H, Res 300.
    That means you image is 18x300=5400px wide and 12.477x300=3743px high  widthxheight=numbed of pixel 3 bytes per pixel for 8bit color 5400x3743x3=60,636,600 which is close to Photoshop 57.8MB estimate or the Tiff file is 57,8MB.
    I need to resize it and send it as a 300 dpi jpeg.
    Then all you have to do is resize the open document and save a jpeg file.
    I have started in the image size dialogue box and just change the W to 11.25. That automatically changes the H to 7.798 and the res still says 300.
    That means you also have RESAMPLE and Constrain checked in the Image Size dialog bottom control section and some interpolation method is set. Photoshop will reduce the number of pixels you have for the image. When you click on OK Photoshop will generate a new image that is  11.25x300=3375px wide and 7.798x300=2339px high
    The file size reduces to 22.6 MB.
    The file is not changed when you use Image Size.  The Tiff file remains as it was before it was opened. Photoshop is a document editor not a file editor.
    I click ok and then go to save as and choose jpeg.
    When you use "Save as" and use the pull-down menu and select Jpeg you will be saving a new file and not be over writing the tiff file.
    In the jpeg box I chose 12 Max
    That is a quality setting the higher the number (Max 12) the better the file quality will be the file will be less compressed then when lower quality setting are used.  You would be hard pressed to see any image quality difference between quality 10 file and quality 12 file.  The quality 10 file size will be quite a bit smaller then a quality 12 jpeg file.
    and baseline standard and click ok. The saved file is reduced to 8.5 MB.
    The new jpeg file size is a product of the jpeg quality setting and how well the image data compresses.  Size can vary all over the place.  Images with lots of fine details will be larger then images with little detail.  An image of a white wall will compress much smaller the an image with the same number of pixels that has a lot of details like an image of a cross word puzzle.
    When I open it in photoshop, it opens at 300 dpi when I look in the image size box.
    Correct you did not change the resolution when you resampled the image.
    However, when I send it to someone else and they open it, the file is only 72 dpi. What am I missing to get the file to save at 11.25 inches, jpeg, but remain 300 dpi?
    If when they open the file the receive they see an  image that has a 72dpi resolution. It means either what you used to send the file resized the the image and sent a different file or what was used to receive the file resized the image and saved a different file. Or the image was resized by the image processor the user used to open the file either during open or after it was opened.  For example if the user received the file you saved and sent 3375px wide and 2339px high and 300DPI and opened it in Photoshop and Photoshop is set to open Jpeg images through ARC the users ACR default workflow setting could be set to open image at 72DPI.  An image dpi is a setting the image may still be 3375px wide and 2339px high however set to 72 DPI the print size would be 3375px/72=46.875"  wide and 2339px/72=32.486" high  using Image size changing itr 72dpi print resolution to 300dpi with RESAMPLE NOT CHECK would return it size to 11.25" x 7.798" at 300DPI.

  • Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

    Ok.
    My workflow is
    RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
    Since ten I've trying different things
    1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
    2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
    What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
    Thank you

    This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
    Benjamin

  • I need to submit a 300 dpi image under 3 megabytes where does it tell me the megabyte size of the image

    I need to adjust an image in photoshop that is 300 dpi and under 3 megabytes. Where in the image size window are the megabytes listed. What is the abbreviation for megabytes?

    Tim,
    In simple terms, the bootldr file is the helper file to load the IOS.
    The BOOTLDR environment variable specifies the  Flash file system and filename that contains the boot loader image  required to load system software.
    The variable defines the primary Cisco  IOS image that will load the final image from another source.
    we need to set the BOOTLDR environment variable to specify  the Flash device and filename of the boot loader image.
    For Old version of IOS, there is a requirement of boot loader image to boot up the IOS image.
    But for the latest version of IOS, no need for boot loader image.
    Below are few things happen when the device boots:-
    1. The router initially boots into ROMMON (this is your bootstrap code, which you can see in the show version command).
    2. Then the router loads into the bootloader code (this is the bootloadr code, which you see in show version). This bootloader code is just an intermediate step between the ROMMON mode and the IOS mode.
    3. The router then boots into the IOS mode from the bootloadr mode.
    So if you do not mention the bootloadr specifically by giving the "boot bootloadr" command, the router will assume the bootloadr to be in bootflash of the device and try to boot it from there. If you mention the "boot bootloadr flash:...." command, then the router will look for the bootloadr in the flash (instead of the bootflash). Thats the only difference.
    However, in both cases, if you have a valid IOS to boot into, then the router will come up without a problem, irrespective of the fact whether bootloadr image is in bootflash or flash.
    HTH
    REgards
    Inayath
    *Plz dont forget to rate if this info is helpfull.

  • PDF does not display 300 dpi images in Safari only

    I have a dynamically generated PDF that contains a 300 dpi image. The image added can be one of several that the user selects. On all other browsers the pdf renders fine. On Safari only, seemingly in all modern flavors of OSx and Safari, the images begin to print and then  stops printing the actual image and grey is printed in the remaining space the image would take up. To make it more fun one of the images renders fine. It is the 3rd smallest image and the 2 smaller ones do not render so it does not seem to be size related. Hoping someone here has seen this before.
    This is a screenshot to use as an example:
    The folding instructions graphic is also 300dpi.

    Thanks Hackintosh.
    It prints as it views, as a corrupt jpeg. I also dug into console and it confirmed there was an error about a corrupt jpg. The most interesting thing is if I open the bad pdf in Photoshop the whole image is there with no signs of corruption. This leads me to believe it's something with how OSx and/or Safari are rendering the jpgs. Another curious sidenote, Safari on Windows works fine but if you save the pdf, move it to a mac and open it, you get the corrupted jpg again.
    I think I'm going to try and stop swimming upstream now. At the end of the day I don't care if the images are pngs, tiffs, or eps. I'm going to try feeding a few different formats and see if that doesn't fix the problem.

  • Help converting pages document with images over to a 300 dpi jpg file

    Hi
    I'm pretty new to using Pages.  I have created a 4 page Pages document with a lot of iphoto images.  It's for a elementary school yearbook.  The publisher ulitmately needs a 300 dpi jpg file.
    How do I convert the pages document into a 300 dpi jpg?
    I tried to convert it first to a pdf then to a 300 dpi jpg but when I sent that file over, they said that when they zoomed in, the images all looked blurry.
    Any ideas on what to do without having to start all over again?  Worst case, I guess I can print out in best quality, scan and save as jpg but there's got to be an easier way.
    I'm not a graphic designer, just trying to fuddle my way through so you'll have to go easy on me with the techno speak.  Any cliff notes for mac beginners?
    Thanks much in advance for any help!

    The conversion isn't perfect between Pages and Word. The same font is handle differently in the two applications and so are many other things too. If you are concerned about how it looks use Pdf versions instead.

  • If exporting images for backup, to reimport into a clean aperture or other program, is it best to use 72 dpi or 300 dpi, or does it matter?

    If exporting images for backup, to reimport into a clean aperture or other program, is it better to use 72 dpi or 300 dpi, or does it matter?  I want the best quality for any future unforeseen use. 

    I am somewhat reluctant to answer your questions after Frank Caggiano's excellent advice, but I really do not like to leave the question open, for there will be many occasions when you will need to export images and to understand how it works.
    But please, follow Frank's advice, right now you do not need to worry about pixels and dpi. That is exactly what I meant, when I suggested to you to make sure you keep a copy of your Aperture Library and to back it up with all your other data, before you erase your disk for a clean reinstall.
    DPI revisited:
    So, is the dpi setting only for exporting to print?
    The dpi settings are necessary to define the size of a digital image, since pixels don't have any dimensions. And since you cannot print or display an image without knowing its width and height, you will need to specify dpi when you are printing or scanning.
    If I leave it at the default 72dpi will there be any problems getting quality prints in the future from jpeg versions exported with that setting?
    Not if you export with the original size - the maximum number of pixels available. That will ensure the maximum print quality.
    The dpi settings are required to export versions; versions are derived from the masters and new image files are computed. When you export masters you get a copy of the original file that already may have a dpi setting.
    If I choose "export masters", will aperture will export my masters just as they are? 
    yes, and  you may add IPICT data if you choose
    Pardon my thick skull--I'm an old dog trying to learn new tricks in this digital world!
    No apologies necessary, we were all beginners once
    Here is another example, maybe that helps a little:
    I exported an image (jpeg) with three different setting: export masters, a version with 72dpi, a version with 300dpi and inspected the files in Graphic Converter:
    The master was exported like this:
    Notice, the master had already dpi settings, although I did not specify any on export.
    The size is 51,48 cm x 38,61 cm.
    The 72 dpi Version has larger dimensions, but also 10 Megapixels.
    and here the 300 dpi version: smaller dimensions, same amount of pixels.

  • I need to capture a 300 dpi still image from my film to send to a magazine, how can I do that? Thank you.

    I am trying to capture the still image and it comes as 72 dpi. I need the 300 dpi for a magazine.
    Some places suggests that I transfer it to 300 dpi using photoshop. But the best is to go from the original.
    Can someone help me with this?
    I have shoot my video using a canon 5d
    Thank you,
    Betty

    Video does not have dpi. Pixel size is fixed. dpi is a print function. The only way to create 300dpi is to use scaling in Photosop or to use a dedicated application like PhotoZoom Pro, which is what I have always used for my books to create high resolution print images of screen shots.

  • Processing images as 300 dpi jpegs, comes out at 72 dpi.

    I've seen two other posts with the same problem with no answer, so I thought I try as well. I am using Ap 2.1. I've processed the images in both the preset jpeg original size with the edit to 300 dpi. I've also made a custom preset with 300 dpi jpegs. Both times the images open in PS at 72 dpi. I processed them as tiffs at 300 dpi and they open in PS at 300 dpi just fine.
    I've tripled checked the file-export-versions-JPEG original size-edit-300dpi.
    any ideas what's up?

    J,
    I am repeating a post I made in another topic about this issue -- I would appreciate your thoughts:
    I conducted a test that may or may not tell us something, but: I had a project with an imported photo scanned at 600 dpi and saved as a .psd at the time of the scan, before importing into Aperture. If I export that photo as a .psd, then PS will open it with a dpi of 72, but GC will open it with a dpi of 600. However, if I export that photo as a .tif, then both PS and GC open and report it to be 72 dpi?
    I am not sure, but I think this is an indictment of Aperture?
    Please tell me about the possible impact at any printers you use, since if the print size is specified, and not pixels have been lost, the image will print as you intend? I have some reports this has been seen with iPhoto, but ultimately not an issue, but I have not research with any printers.
    Ernie

  • Image 292 dpi, will print at 300 dpi

    Hello, I'm working on a magazine and we would really like to have a certain photo, but unfortunately it's a bit too small. When placed and resized correctly InDesign tells me that the image is at 292 dpi, it will be printed at 300 dpi. I understand that this could be printer specific, but how do you think the result will be? Will 8 dpi off be noticeable? Of course if possible I will print that specific image. But if not, would you take the risk of having an image at 292 dpi hoping it will be alright?
    EDIT: Oh, some info: it's going to be printed on A4, the photo in question will be 213 mm x 88.25 mm at the top of the page.

    All image resolution requirements that you may here are generally really guidelines. Assuming you are printing via either a PDF or PostScript workflow, all the images are resampled during the RIP's separation and halftoning process anyway. Don't sweat over the difference between 292dpi and 300dpi (although some under-educated prepress people may claim that the 292dpi is not good enough and refuse to print it.
              - Dov

  • How to generate 300 DPI image from canvas using Imagesnapshot

    Hi all,
    I want to generate image from my canvas.
    I tried using bitmapdata and imagesnapshot.
    Bitmapdata has no property called DPI.
    Imagesnapshot allows to set DPI but it is not generating 300 dpi image.
    Any idea?

    You are in the Using iPhone forum. I will ask the hosts to move this to the iPad forum. However, I'm not aware of any setting change you can make to the cameras in the iPad or iPhone.

Maybe you are looking for