3DMark Scores!! (Post Yours!)
I decided to make a thread for all the MSI forum users, to post their 3dmark scores!! Also once enough people have posted, I can make a list of who is leading in 2 categories, of AMD and Intel cpus.
3dmark01=16800
3dmark03=5445
(At 400mhz for my ram, it wont remember the fps in 3dmark01 )
(PS. Can we move this to the "Anything Under the Sun" forum. I meant to post there)
Here is a thread i started about 3dmark scores in 64bit forum and Here hope this helps in your testing the last link was when i was trying to see what ATI drivers didn't like K7N2 but is obsolete now.
Similar Messages
-
Post Your's 3DMark 2k1 scores HERE
I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...Here is mine using the system in my sig.........
3dmark01 score.....24,552
http://service.futuremark.com/compare?2k1=8165419
DX9c
66.81 nvidia drivers
XP Pro with SP2 -
Post Your's 3DMark 2001 scores HERE
I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...MSI K8N Neo Platinum (1.5b2 beta BIOS)
Athlon 64 3000+ @ 2.4GHz (10 x 240)
Radeon 9800 Pro @ 450/375
2x512MB Crucial PC3200 @ 240MHz @ 3-3-3-8 1T
Catalyst 4.9
Score: 23,077
URL: http://service.futuremark.com/compare?2k1=8134558 -
K7N2 Delta Board with latest BIOS
2 Sticks 512MB Muskin PC2700 Ram "black series" running 1:1 ratio on a 133mhz FSB speed (clocked down to get into windows)
80gb seagate 7200 rpm drive
GeForce 4200 TI 128mb ram with 52.16 driver
3.63 Network Driver
3.66 nforce IDE
3.34 AGP controller
AMD 2800+ Athlon thingie with a volcano cooler running at 1.6ghz so i can write this post
Windows 2000 SP 4 with Directx 9.0b
Antec 380W power supply
1 CDRom
I downloaded the futuremark 3dmark program to test my system as its been doing sad pathetic things and I'm trying things to make it work better. I got the new mushkin ram and running at 133MHZ FSB I can actually do things, at 166mhz fsb the system goes to crap and keeps resetting.
I ran the 3dmark and got 91fps first test then 5, 8 and 2 frames/sec afterwards for a final 3dmark score of ..../sigh ... 882.
I gotta think my video cards shot cause during game play I keep getting whole screens of garbage, loose game textures and I keep getting STOP 0x1E in the nv4_.dll when i blue screen.
Are these boards this damm bad or do I simply have a bum one?try reinstalling the thingie,s cooler as the rest of your hardware looks ok to me
be sure its not on backwards,be sure its not sitting on the high top part of the socket
clean and new fresh grease -
2011 iMac Boot Camp 3DMark Scores
So I got my new iMac a few days ago with intent of running Boot Camp for gaming in Windows 7, and all day to day computer operations in OSX. I am slightly disappointed in its performance so far when running games like Crysis 2 at higher settings. Some of this may improve with driver updates but according to AMD driver updates when using boot campy have to come from Apple, so GPU driver updates may be few and far between.
I was interested in seeing what everyone else running the new 2011 iMac's are getting in 3DMark06 and 11 when using boot camp.
Computer:
2011 27" iMac
3.4 Ghz i7
8GB Ram
AMD Radeon HD 6970M 2GB GDDR5
Scores:
3DMARK06 - 20915
Width: 1280
Height: 1024
Anti-Aliasing: None
Texture Filtering: Optimal
VS Profile: 3_0
PS Profile: 3_0
3DMARK11 - 3139
Used basic edition, only option that comes with trial version
Screen Height720
Msaa Sample Count1
Texture Filtering ModeTrilinear
Max Af Anisotropy1
Tessellation Detail5
All 3DMARK tests were run using the free trial version so all the settings were default. You can get 3DMARK06 and 11 from the link below.
http://www.3dmark.com
- Just click on benchmark in upper right and corner and you can select which one you want to download the trial to.
If anyone else has run these tests, or would like to, please post your scores here! Don't forget to include what hardware your running on your computer.
ThanksThe Hatter,
Which driver are you talking about specifically? Are you talking about the Catalyst Software Suit here:
http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
I have downloaded multiple drivers from AMD saying they are for the AMD Radeon HD 6970m but they each either don't apply at all or say that no compatible hardware was found? When i called AMD they told me that any support and driver updates for graphic cards used in Apple computers would have to come from apple? Have you had success from drivers downloaded from the AMD website? -
With the system below, I get a 3DMARK3 (Build 340) score of 4540 (53.03 drivers) at standard clocks (400/850), which seems to be rather low. At the highest stable OC (425/925), I get 4791. Any tips, suggestions or comments? Thanks in advance.
System:
Intel P4 2.8C 800FSB, HT
ASUS P4P800 Deluxe UAY
OCZ 2X512MB PC3200 Dual Channel EL Platinum
MSI FX5900 VTD128 VIVO
Detailed Results (at 400/850):
3DMark Score: 4540 3DMarks
GT1 - Wings of Fury: 161.8 FPS
GT2 - Battle of Proxycon: 33.3 FPS
GT3 - Troll's Lair: 27.1 FPS
GT4 - Mother Nature: 22.1 FPS
CPU Score: 568 CPUMarks
CPU Test 1: 59.6 FPS
CPU Test 2: 10.7 FPS
Fill Rate (Single-Texturing): 1365.1 MTexels/s
Fill Rate (Multi-Texturing): 2835.3 MTexels/s
Vertex Shader: 11.7 FPS
Pixel Shader 2.0: 43.0 FPS
Ragtroll: 15.9 FPS
No sounds: 50.2 FPS
24 sounds: 40.8 FPS
60 sounds: Not supportedQuote
Originally posted by The Black Wibble
I'd be interested to know the 3DMark2003 score when there are fewer programs running in the background. Use msconfig to disable all the programs under the startup tab except NvCpl and rundll32 nvclock. Assuming you are running XP try to disable as many *non* microsoft services as you feel safe doing. Reboot into that environment and redo the benchmark.
Also, do you know for sure that your pc3200 memory is running at full speed (ie. 400MHz) and is not using some other fsb:mem ratio of 4:3 or 5:4?
The given score is with every non-essential background process and service diasbled (though it makes very little difference). DRAM is running at 1:1 (ie 400). Tried 5:4 with FSB=230 (max stable at stock voltage). Gains a little (CPU), loses a little (RAM), doesn't make much difference in the end. IOW, everything is running at specs now.
Also, (to ToxicTaz) it's not a SP.
I noticed a peculiar thing, though. When I ran Aida and checked video mem speed, it reported, as "actual speed", some odd number quite a bit lower than 850 (something like 736). This is in 2D mode of course (but memory speed should be the same). Anyway, now I cannot duplicate it. Could it be that the memory is stepping down on its own accord? GPU, yes, but I didn't think memory could do that. GPU doesn't get too hot either (~48 deg right after 3dmark3). Is there a way I can check "actual" memory speed during 3D testing, if there is even such a thing?
Mind you I can OC memory upto 930 OC and it passes nVidia test and seems to be running fine at that. But if it's lowering down behind my back, that would explain it. -
Right then - lets get this one started
3dmark scores please for system benching comparisons?
Mine is as follows:
No ocing at all:
24281 - 3dMark 2001SE
11299 - 3dMark 2003 - Build 340
4027 - 3dMark 2005 - Ver1
62,746 - Aquamark
4,873 - PCMark04
with ONLY my GT graphics card clocked to Ultra speeds (which it has been since day one) - for those that dont know - 350/1Ghz to 400/1.1Ghz ;>
25780 - 3dmark2001SE
12,668 -3dmark2003 - Build 340
5085 - 3dmark2005 - Ver 1.1.0
67,527 - Aquamark
4915 - PCMark04Quote
Originally posted by OafyC
Quote
Originally posted by RexB
Quote
Originally posted by phrozin
shouldent this be over at benchmarks ? oh well
a64 3500+ neo2 x800pro
3d 01 29560
3d 01 14089
aqua 3 75k
a64 3500+a8v x800pro
3d 01 30532
3d 03 14490
aqua 03 77231
doom 3 1024x768 88.7
a64 3200+ 1 mb neo 1 x800pro
3d 01 29700
3d 03 13780
aqua 3 72k
a64 3400+ 1mb neo1 x800pro
3d 01 29570
3d 03 13349
aqua 3 71k
Holy Shmoly phrozin! You running a NOS in those rigs?
Those score are a bit high. About what I get on my comparable 3400 system if I force null ps 1.x
How so?? all you haft to do is flash with xt bios to open 16 pipes then flash it back then volt mod it easy null px shader lol don’t thinks so! all scores are with fm approved drivers and whql
03
01
aqua
stock card o/c system runs 26500 01 13089 03
I finally get my fx 53 and vapour chill next week so im looking for mid 16k in 03 1 interesting point is the difference between k8n neo 2 and the asus both were running same clocks and same mem timings (I though at least 1 of you would have picked that up instead of craping on about null shader aint thats a nv thing anyhow) some what disappointing i had high hopes for the neo2
The same old story I cant do so it's impossible instead of asking how! -
My 3dmark scores are a joke need advice please
Hello, well I cant understand why my 3dmark scores are so bad, 6494.
my pc
MSI KT3 Ultra
512 Corsair cas2 PC 2700
80 gig barra 7200 (OS running on it)
40 gig barra 7200
30 gig WD 7200
Win XP Pro
Leadtek GF4 4200 64meg
I have configured my bios according to the settings guide on http://www.amdforums.com/showindex.php?s=&threadid=124482
Hard drive have also been defragged
I have also used River Tuner and have changed my settings from default to Core clock 279 Memory clock 567 that gave me an increase of around 400 points. But its still not what I had expected. what would be a safe limit to reach ?
I have the FSB set to 148x10.5
I would have thought my scores would have been around the 10,000 mark.
Anyone have any ideas as to why the score is so low or any ideas on how to improve performance.
I am so dam disapointed, it seems no matter what i try with this board it doesnt work.hey Grandad,
try closing/disable PC Alert 4 AND Cooler XP,
and don't forget the programs running at the background, such like anti-virus programs (McAfee/Norton). Those services must not running while benchmarking.
TIP: the time of benchmark is also important.
After starting WinXP/system your processor is cold.
And a much better cooling is very recommended.
10 degrees celcius colder means 1000 points more.
ATTENTION: Don't adjust the PCI reserved megabites (for DirectX/OpenGL) at the display (drivers) properties.
I did that once, i had a lack of 40 fps at every benchmark test.
i hope this is usefull for you.
Thats why i got 10025 points with my GF4 Ti 4200 XP ) -
Kt600 delta post your gripes here!
Major gripes with this board :-
1.why should i have to spend another £50 - £80 on a top of the range psu
just to run a £55 motherboard ?
The amount of people on this forum who have had to upgrade their psu just
to get this board up and running is unbelievable
2. heat :- this board runs a good 10 - 15 degrees higher than its nforce 2
counterparts ! so you have to go out and buy uprated cooling to
get a stable system
never mind trying to clock it
kt6 chipset :-this is the most unstable board i have ever fitted costing more in the long run to get it all up and running than any other ive built
shall stick to the nf2 in future
feel free to post your moans1: The heat on the cpu, increased ALOT from my old KT400, very strange. It vas before, 39-40 (Idle) now its 45-46, much more I think, maybe there is something wrong with the sensor, or the KT400 had a 'good n' sweet days' sensor.
Well, that would be everything I think.
I ran my XP2500+ at 3200+ yesterday, and it was very stable, but I had to increase my TwinMOS PC2700 memory to 3v to have them in 400 mode. And even then I had to remove Ultra mode and everything else fast, that made the computer slower, atlest in 3dmark, then default clock on everything So I will just get better mem and then I will go 3200+ everyday, I hope, if there wont be a problem with the heat.
Using a open window, and a Cooler Master Aero 7 LITE at 45% speed, I suppose I can increase the speed if I want to clock but Its very loud then. I think, as I said that there might be some error with the sensor, cause the window was open, and the computer was just under it and totaly open, no plates or sidepanels or something, also it was -3C outside (sweden). The old motherboard (K4v) got much colder.
EDIT: I have a Q-TEC 550W (you say they suck, not mine ) and I still got very good voltage even when Im in so extreme overclock (to me that is extreme ) -
Higher 3dmark scores threw overclocking on kt4 ultra
OK i just bought a 2100xp based on the assumption that id overclock it ....the first problem i noticed was my power supply wasent strong enough. so i swaped it out with my other computer and i got the fsb up to 133. When i let fussy logic test out overclocking i come up 139. now my 3dmark scores sould be a little higher like maybe 13600. but i cant even get close withouy that extra 6 mhz on the fsb. So after reading threw posts i heard that if you set it to 166mhz a new driver enguages for the 333 fsb processors but when i do it just like all the other posts i get no post....so i was wondering if it could be a voltage problem much like from 100 to 133 like alot of people are having or if my processor is stoping it. but i thought the lock was just for the multiplyer and ive been told to lower that to acheve higher fsb speeds. I havent thought of over clocking my radion yet...... and have read that the xps pretty much can hit 2.2 or even 2.1. so im really confused why i cant up my bus....i mean in the end if i unlock my cpu amd i going to raise the mulitpler so i can leave the bus at 139 (cause its stable) or if there was another way. im lookin for a 14500 3dmark score and ill be happy and i didnt want to spend the money on the unlocking kit so really i was looking for other options. when i got the motherboard i was pretty mad about all the so called problems but i got them cleared up and now am looking to see what i can do with it thanks in advance for all the help you guys are great
your not getting 166 with that cpu without unlocking it
so you can reduce the multiplier -
The 3d mark scores thread has me thinking.
My post from that thread:
I'm not really a big benchie, but all of this has me thinking. All-in-all, this machine is not much faster than my 2800= nforce2 setup, in fact my 3dMark03 & 01se scores are much lower. With my 2800 I was getting 17250 in 01se & 6250 in 03, now with the setup below I'm getting 5243 in 03 & 15874 in 01se. Even turning the quality down has little impact on the score. One big difference in the a64's favor is I can run 'lock-on' at much faster framerates with AA & AF turned all the way up. The Vid card and extra HDD came from my old box which was about 6 months old.
My AGP apature is set @ 128mb, my mem timings are below and my CPU is not OC'd, but my GPU is; it's set to 432/371, but not all of the time. I'm running cat 4.1 drivers. So whats the deal, any guesses?
Like I said I'm not all that concerned with my 3dMark scores as I am that I may be missing something that is causing my computer to take a performance hit.Ok, I managed to get mine fixed. I now get a cpu score of 628. This is with normal windows applications (virus killer, etc) running in the background. Will I tell you how I did it or will I keep you in suspense jk.
Ok, I did 2 things at once so I am not sure which fixed it.
1. Removed my 1G pc2700 memory and put in 512Mb DDR400 generic memory.
2. Switch off cool n quiet in the bios.
I suspect it's the cool n quiet but havent turned it back on again yet to check.
Hope this works for you (hope you havent started installing fresh windows yet).
Edit.. On a side note since you asked about via drivers. I have them all installed except IDE. I find via IDE drivers to be TERRIBLE. This is my first via board in a long time. I used to have via boards (over 5 years ago) and I had the same problem then. Whenever you put the VIA ide driver in the system goes to Sh*t. The drives become noisy and the performance is poor. My advice is to stick with the microsoft ones - a million times better.
skooby -
how do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again
Did you do this?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
Steps to link a report to Web Application Form. Post Your Opinion
Hi friends,
After going through it what is your opinion. please do post your opinion.
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx.vb file, it is as follows:
Private Sub ConfigureCrystalReports()
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
myCrystalReportViewer.RefreshReport()
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
myCrystalReportViewer.Visible = True
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
For Each mySection As Section In mySections
Dim myReportObjects As ReportObjects = mySection.ReportObjects
For Each myReportObject As ReportObject In myReportObjects
If myReportObject.Kind = ReportObjectKind.SubreportObject Then
Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
SetDBLogonForReport(myConnectionInfo, subReportDocument)
If myReportObject.Name = "Subreport1" Then
Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
If Not lvSec Is Nothing Then
Dim t1 As TextObject
t1 = lvSec.ReportObjects("txtEmpName")
t1.Text = Session.Contents("EmpName")
Dim t2 As TextObject
t2 = lvSec.ReportObjects("txtRepID")
t2.Text = Request.QueryString("REPID")
End If
End If
End If
Next
Next
End Sub
Please do help me out as the data of report is not getting displayed on the report.
After going through it what is your opinion. please do post your opinion.
While creating the Report has the following Report Options on / checked.
1. Database Server is Case-Incensitive
2. Use Indexes Or Server For Speed
3. Verify on First Refresh
4. Show Preview Panel
5. Display Alerts on Refresh
6. Select Distinct Data for Browsing
Do I have check or uncheck any other option?
Thanks and regards
Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PMSir AG,
Thanks a lot for replying and spending your valuable time for my problem.
Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
So as per the code I have attached, I have this
Option Explicit On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Next for ReportDocument Object:
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
Above is the code used by me in Page_Init and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
Lastly:
The database connectivity code:
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
SetDBLogonForReport(myConnectionInfo, myRepDoc)
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
This code I have got from a sample of the forum itself.
Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
Thanks and regards
Mushtaque -
Best export settings? Post your tips!
I have been using iMovie for a long time. I have messed with settings quite a bit but the files always come out huge. I have seen other people's QT movies with great image quality for small file size. I have no idea how they do it.
My best experience in iMovie is to use the CD-ROM setting for export. This gives it the window size that I want, with a small file size, while maintaining pretty good image quality.
I'm talking about custom settings here. I need something other than the pre-made settings. There are so many custom options, but they're all way over my head. My goal is to use something other than h264, but keep the CD-ROM quality and size.
Does anyone have any good custom settings they recommend for getting a good balance of dimensions, image quality, and file size?
If so, post your tips! Let us know your favorite export settings!
--TimothyThe export settings are determined by the way the file is to be viewed.
"Local" files (those on CD's or fast networks) can be much larger in file size because bandwidth isn't much of an issue. Sent to iDVD and they make great videos that can only play in DVD players or software.
"Web" based files are a new can of worms because each persons opinion of "good" and also "small" file size differ so much.
Best advice anyone can give you is for you to make your own sample export "tests":
Take a minute sample (a part that has high action and motion) and choose the "Expert Settings" to send the file to QuickTime.
Try various video codecs and adjust the data and frame rate to raise or reduce file size.
Try AAC audio (very popular audio format) but set the frequency to "half" of CD quality (22050 Hz). This will be half as large in file size.
If your camera didn't record in stereo (most don't) set the file to mono and you reduce the file size in half again.
Compression is nearly an art form and the options in the expert settings can be a bit confusing. -
Got a feature idea? Post your idea or vote on an idea at the ideas site
We have just launched a new site (
http://ideas.acrobat.com) so
that we can hear new ideas and have the community vote on which
ideas are important. Post your idea or vote on an idea. We hope
you’ll check it out.
Thanks,
The Acrobat.com Team
Buzzword is a part of Acrobat.comThe installing groups is actually already implemented in the beta of 2.6, which is in ftp.archlinux.org/other/pacman
From the ChangeLog itself:
Added group handling, so one can run 'pacman -S kde' and
install all files from the KDE group
Not sure about the other things though, those sound like some very good ideas that should be considered and hopefully they aren't too hard to implement.
Kritoke
Maybe you are looking for
-
Deleting a record in an internal table
hi, loop at itab, ..... if a particular record alone matches a condition then that particular record alone has to be deleted. endloop. only the particular record which matches the condition inside the loop should be deleted. remaining records s
-
My ipod says I have 2.7GB of App data on my hard drive, but I only have 4 apps and they only add up to about 50MB. How do I find out what exactly is taking up so much space and how do I clear some of it up? There is no way the apps I have can add up
-
Solution Directory--Business process --Check in /Out option
Dear Friends, I am working in Solution directory (t.code: DSWP). I have created one maintenance project. In this maintenance project i have maintained the following business process. 1. Sale Order Processing 2. Production Order Processing. These t
-
Hello, I have the brand new iPod Touch 5. And someone messed up the passcode and now it says "iPod is disabled connect to iTunes". After I connect it to iTunes, it says "Do you want to allow this computer to access information on "iPod"? When I click
-
Reg.table and screen connectivities
Dear Experts I want to save and retrieve some data like Emp Name,Emb No,Address and Cell number by creating new table and fields. How to implement this, what are the steps,how to connect the table with the screen. Pls explain in greate details. Thank