54.6 PRINTER ERROR in addition to the REINSTALL TRANSFER BELT message on Color Laserjet 4550

After moving the printer gave the error 54.6. I tried to do everything from bpl08143-document and tried to clean everything, but the error remained. I changed the Transfer-Unit with a new one, but the error did not disapear. At the RESETS-menu at NEW TRANSFER KIT it did not accept SELECT .
The original cleaning-brush is missing, so I used another new one from a razor to clean the  Density Sensor. Befor moving the printer was working without this brush being installed.
Can anybody help me to get my printer working again as I need it urgently and it is nearly impossibel to find a professional help here in the wilderness of Brasil.

Hi horst2703;
Welcome to the community and sorry to hear that you are experiencing this issue. 
Your HP LaserJet 4550 is a commercial product. I suggest posting in the forum for HP Business Support as well for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
Best of luck;
RobertoR 
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Error 8 while upload the program : row 425 message

    Can any one answer this ?
    I am not using Any lower case letters any special characteristics in the flat file.
    But still i am getting the same error "Error 8 while upload the program : row 425 message "
    Thanks

    hi padma
    or chk this
    In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
    There are 2 remedies.
    1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should wipe deleted objects.
    2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed.
    reg
    ashwin

  • Color Laserjet 4550 49.4c02 error

    I am getting a 40.4c02 error on my color laserjet 4550 printer. HP do not seem to support this printer nay longer so I cannot do a firmware upgrade.
    Is the printer finished or does anyone have any suggestions on how to solve this problem.
    I am printing from windows Xp PC's
    thanks
    geraldine

    HI there I hope youare doing well. 
    This is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
    You may find the commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of luck;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • I can't change the display language on my HP Color LaserJet CP1518ni

    I have a HP Color LaserJet CP1518ni printer that I inherited from an employee who is no longer at the company. The display screen on the printer is not showing in English, it's in some language I do not recognize (and neither does anyone else). I want to change the display language to English but the manual only shows you how to do that on the display, which I cannot read because it's not in English, hence my dilemma. Does anyone know of a way to change the display language through the computer?
    Thanks

    InventoryLady,
    Yes that is what I did.  I do not know the language that it is currently set at, so the recommendations were from using the front panel menu. The OK button is the OK button on the front panel, that would not be in another language, it is the button in between the left and right arrow- See image below #6:
    Once you have hit the OK button, you can complete the steps in my earlier recommendation. Again because I do not know which language it is currently set at, I am guiding you the best I can. As for selecting the English language, I suggest using Google Translate to find out which language it is currently set at and see what their word for English is.
    If you have any more questions, please let me know.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Mx860 - error B200 - printer error has occured. contact the service center

    hello
    can anyone help me with this errror? 

    Hi thsarah,
    With the B200 error, the printer will need to be serviced.  Please Contact Us for your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • After a recent update of Photoshop CS6 (via Creative Cloud downloader) I cannot print directly from the program. A print error is shown in the printer document queue.  I can print from all other programs including Illustrator. Any solutions to this proble

    When I copy the Photoshop file to another computer with an old version of Photoshop (CS2) I can print OK from it

    Nobody can help you. You have not provided any proper technical information like system info, what printer, what settings etc.. You need to do a lot better before people can even begin to guess and help you.
    Mylenium

  • Lost Printer Features Pane for HP LaserJet 4050 and Color LaserJet 4550

    Hello,
    I am trying to restore the Printer Features Pane for 2 different Hewlett-Packard printers we have connected to our LAN.
    The Printers Features Pane is available on several of our older iMacs but NOT several of the newest iMacs just recently installed.
    After doing some reading in the discussion forum I thought this was due to an erroneous PPD file and replaced both PPD files on the new iMac (with the absent Printer Feature Pane) with the PPD files copied from the old iMac (with the correctly functioning Printer Feature Pane) . I actually copied the PPD files into both of the following locations:
    • /Library/Printers/PPDs/Contents/Resources/en.lproj
    • /System/Library/Printers/PPDs/Contents/Resources/en.lproj
    Unfortunately this did not work even when i deleted the old printer, replaced the old PPD files with the new ones (actually replaced the new ones with the older ones from the previous iMacs on which the Printer Features Pane was working as anticipated), restarted the machine and then added the printer selecting the correct PPD file. All machines are running X.4.10
    I am sure this is a simple fix that i am just overlooking but really need to get back the option of printing to the "Letterhead" tray of our printers.
    Any suggestions are appreciated.
    Thanks
    Mike

    Paul,
    Below is the best I can do to portray the visual appearance of the print dialog boxes for
    Computers that DON'T provide the Printer Features option:
    ...............................Print
    Printer: HP LaserJet 4050 Series
    Presets: Standard
    Menu Options: Copies & Pages
    ........................Layout
    ........................Scheduler
    ........................Paper Handling
    ........................ColorSync
    ........................Cover Page
    ........................Error Handling
    ........................Paper Feed
    ........................Summary
    and for
    Computers that do provide the Printer Features Option:
    ...............................Print
    Printer: HP LaserJet 4050 Series
    Presets: Standard
    Menu Options: Copies & Pages
    ........................Layout
    ........................Scheduler
    ........................Paper Handling
    ........................ColorSync
    ........................Cover Page
    ........................Error Handling
    ........................Paper Feed
    ........................Finishing
    ........................Image Quality
    ........................Printer Features
    ........................Summary
    and for
    Computers that do provide the Printer Features Option
    After selecting Printer Features from the pull down menu:
    ...............................Print
    Printer: HP LaserJet 4050 Series
    Presets: Standard
    ...............................Printer Features
    Media Type: None
    ....................Plain
    ....................Preprinted
    ....................Letterhead
    ....................Transparency
    ....................Prepunched
    ....................Labels
    ....................Bond
    ....................Recycled
    ....................Color
    ....................Rough
    ....................Card_Stock
    I wish I could attach some screen shots as they are usually my best way to convey the visual appearance of the interface. But hopefully the information above will suffice.
    The following is an extract from the PPD for the LaserJet 4050 (same file on both machines that display and don't display a printer features option) that appears to be the salient area of the file for dealing with this functionality. :
    *%==========================================
    *% Media Type
    *%=========================================
    *OpenUI *MediaType/Media Type: PickOne
    *OrderDependency: 20 AnySetup *MediaType
    *DefaultMediaType: None
    *MediaType None/None: "
    <</MediaType null>> setpagedevice"
    *End
    *MediaType Plain/Plain: "
    <</MediaType (Plain)>> setpagedevice"
    *End
    *MediaType Preprinted/Preprinted: "
    <</MediaType (Preprinted)>> setpagedevice"
    *End
    *MediaType Letterhead/Letterhead: "
    <</MediaType (Letterhead)>> setpagedevice"
    *End
    *MediaType Transparency/Transparency: "
    <</MediaType (Transparency)>> setpagedevice"
    *End
    *MediaType Prepunched/Prepunched: "
    <</MediaType (Prepunched)>> setpagedevice"
    *End
    *MediaType Labels/Labels: "
    <</MediaType (Labels)>> setpagedevice"
    *End
    *MediaType Bond/Bond: "
    <</MediaType (Bond)>> setpagedevice"
    *End
    *MediaType Recycled/Recycled: "
    <</MediaType (Recycled)>> setpagedevice"
    *End
    *MediaType Color/Color: "
    <</MediaType (Color)>> setpagedevice"
    *End
    *MediaType Rough/Rough: "
    <</MediaType (Rough)>> setpagedevice"
    *End
    *MediaType CardStock/CardStock: "
    <</MediaType (Card Stock)>> setpagedevice"
    *End
    *?MediaType: "
    save
    currentpagedevice /InputAttributes get dup
    /Priority get
    0 get get
    /MediaType get
    (Card Stock) anchorsearch
    {pop pop (Card_Stock)} if
    = flush
    restore
    *End
    *CloseUI: *MediaType
    I don't know if it helps you to know that the Printer Features option did work on my current G5 tower, but following an erase and install that functionality has been lost.
    Thanks for your ongoing assistance with this problem.
    Mike

  • Will the scan function of an HP Color LaserJet CM2320nf MFP work with Lion?

    I have a Macbook Air connected to a Windows Small Business Server 2003.  I can print on the HP 2320 fine with the Print & Scan utility, however the utility won't recognize the HP as a scanner.  The forums I have read on Apple regarding other HP all in one printers is that they can't scan.  HP's support forum is iffy at best; some locations indicating that a fix is due "late 2011", but sending me in a circular link pattern to find a solution.  I have tried downloading the HP LaserJet AiO/HP Director to no avail, even connecting directly to the printer/scanner via USB.  Downloading the drivers doesn't resolve. 
    Based on this HP link, I believe that scanning isn't supported.  I am dumbfounded by this.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A2 

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Printer error with HP Laserjet 6L and Windows 7

    I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
    I would be very grateful for any advice on this. Thanks.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Color LaserJet 2550ln printer displaying error massage

    I was trying to print a page of tickets (6) containing graphics, but my hp color laserjet 2550ln printer printed a page with the following message:
    ERROR: limitcheck
    OFFENDING COMMAND:  showpage
    STACK:
    (r)
    ( Sys / Start ) 
    ( Sys / Start ) 

    Found this on the discussion posted 06-03-2010 01:55 PM   It worked for me.
    I just went through this fix yesterday. I can't remember where I found it on hp.com, though. Here it is:
    Turn printer on.
    On your printer, press the Menu button
    Press 2 (on the fax dial pad)
    Press the right arrow (next to Enter button) until you arrive at "High Speed USB.
    Press Enter
    Press right arrow to select "Off."
    Press Enter.
    Press Enter again.
    Printer will then reboot. I used to get this error occasionally with Windows XP. I wish I would have taken the time to fix this a long time ago!

  • HP CJL 4550 print error message instead a page of PDF document

    Hi,
    I have some problems with printing PDF, and I completly have no idea what's wrong.
    Often printer print an error message like this:
    ERROR: typecheck
    OFFENDING COMMAND: image
    STACK:
    1.0
    -mark-
    -savelevel-
    -mark-
    -savelevel-
    but I can print this document, when I print it to XPS file, and print this XPS file.
    My printer is: HP Color LaserJet 4550
    I am using: Windows 7 x64
    My computer is connected with printer by HP JetDirect
    I will be grateful for any hints.
    Grzegorz

    Hi GrzegorzP,
    Although I'd like to help, I suspect your question would be better answered in the HP Enterprise Business Community,  as the Color LaserJet 4550/ 4600/ 4610/ 4650/ dn/ dtn/ hdn/ n Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to log into the commercial forum > HP Enterprise Business Community
    I have taken a moment to find the support page for the CJL 4550, I hope this helps.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • "General printing Error"

    this printe has is just over a year old it started printed very faded pictures at first I bought new ink and it did not help the picture quality at all then maybe a month or so later it wont print anything at all it keeps saying general printing error I have used the hp support assistant and nothing is working 

    Hi SuperMotte,
    I understand that you are getting an error message on the front panel of your HP C410 printer. I would like you to go ahead and start troubleshooting An Alphanumeric Code (Example: '0x...' or 'C2...') or 'Ink System Failure' Error Message Displays on...You will notice in this document you are required to remove your printhead, please be very careful as you do not want to scratch any of the contacts.
    I will watch for your reply, let me know if this was helpful or if you require more assistance.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error while creating the "Year Transfer"

    the following error occurs which doing the Year transfer in SAP business one.
    Please suggest the reason and its solution.
    Error [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot change owner of object 'WTR9' or one of its child objects because the new owner 'dbo' already has an object with the same name. 'User Tables'  has occured while creating a new company

    Hi Pankaj,
    Which localization are you working on? As far as I know the year end transfer is only supported on specific localizations, like Israel. Not sure if this has changed over the last year.
    Hope it helps,
    Adele

  • HP Color Laserjet 3550 - the "attention" light won't turn off

    I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off.  It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in.  It was a real easy fix,  I pulled the page out and now the "attention" light won't turn off.  So I can use the printer at all.  I've had this printer about a year. I purchased it used.  I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router.  I've opened up the printer and removed the casing (the plastic apparatus on the door)  and replaced it. The router is a 2Wire HomePortal 1800HG.  I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix.  Now a simple stick like this and the light just wont' go off.

    ShlomiL wrote:
    HI Vern,
    Where did you bought the printer? may you bought it from a different region than your current one?
    What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
    I bought the printyer in the US and the cartridges also came from the US,  probably no the same state.  Cartdridge # 97,  black # 96.  I don't see a product number.  This is the same # that was in the printer before and the same one I always used.   As soon as I pull it out the light goes out,  and on again as soon as I install it.  This is before the printer even cycles through it's "new cartdridge" routine,  if you know what I mean.
    thanks for the reply

Maybe you are looking for